RETI KANKAR 2025-26

Schedule-B / Bill Of Quantity

Item No. Description of Item Quantity Unit Amount

Providing & Fitting readymade prefabricated portable

chemmicalized ferroconcrete mini panelhaving outer

1 size 111x50x190 cm with necessary fitting for electric 1.00 Nos. 12309.88

panel mounting and drawing.complete as per detailed

Geophysical & geohydrological ground water

2 investigation for finalisation of one pin point including 1.00 Nos. 14428.86

vehicle charges.

Estimate for DR Bore (80 m depth ), Drilling of bore

3 hole in allivial strata by direct rotary rig of size250 80.00 Mt. 865.57

Remaing of 250 mm dia pilot borehole to 450 mm dia in

alluvial strata including lowering of pipe assembly

bailplug,graval packing bore washing by back washing

clay packing etc.

5 Providing 200 mm dia uPVC blank pipe 60.00 Mt. 1458.44

Providing 200 mm dia- 1.00 mm size Johnson V-wire

screen pipe as per

Providing bore plug , bailplug, clamp ,steel bended plate

7 etc material suitable to 200 mm dia pipe and bentonite 1.00 Nos. 4040.00

8 Electrologing charges 1.00 Nos. 18180.00

9 Bore development charge 600 CFM/150 PSI 8.00 Hrs. 3931.93

Providing and Supplying erecting 10.0 HP Three phase

Submersible pumping machinery with including

supplying and lowering 110 mm dia 10kg / cm2 HDPE

10 pipe, 1x3x6 mm2 cable as required all item shall be 1.00 Job 111114.14

approved by board vendor list and Three phase Starter on

wooden plank including loading, Unloading, Carting,

Testing etc. Comp. as directed by Engineer in charge

Providing and Supplying in standard length ISI mark

high density polythylene HDPE pipes Suitable for

potable water as per IS Specification on 4984/1995

11 including all local and central taxes,tranportation,freight 10.00 Mt. 1274.62

charges,octroi,inspection

charges,loading,unloading,conveyance to the dept. stores

etc. comp.(a) 10.00 kg/cm2 (4) 200 mm.

Excavation for foundation in all sorts of soil including

sandy and gravelly soil, soft and hard murrum etc. dry

12 condition including depositing the excavated stuff in 1318.00 cm 221.19

uniform layer in banks or as directed etc. complete for

lead up to 1.0Km. and lift. ( By Machinery)

Providing laying & jointing in standard length ISI mark

rigid unplasticised PVC pipes suitable for irrigation

water with self fit joint including jointing necessary

13 fitting like Tee,Bend,Coupler,reducer,End cap joining

(Cement solvent) of following class and diameter as per

IS specification No. 4985/1988 etc. complete.

(A) PVC 6.00Kg/CM2 pipe

For 160 mm diameter P.V.C. Pipe 330.00 RMT 555.50

For 140 mm diameter P.V.C. Pipe 350.00 RMT 333.30

For 110 mm diameter P.V.C. Pipe 530.00 RMT 263.61

Providing and Fixing ISI Mark following class &

diameter of different type of valves with necessary

14 fittings of standard design and specification including

testing with all leads and lifts etc. complete.

(1) Sluice valve - 100mm diameter 2.00 Nos. 4077.37

(2) Sluice valve - 150mm diameter 3.00 Nos. 6506.42

Providing 0.60 x 0.60 airvent in 1.80 m height and

x 0.60 kundi in 0.60m height with 110 mm diameter

PVC 4.00 Kg/CM2 pipe, Air valve (Single acting) -

40mm diameter including required G.I / UPVC Pipe,

PVC Tee (Molded) 110mm X 110mm, End Cap 110mm

diameter , 225 mm dia.C. I. flanges outlet 15cm length

of approved pattern with necessary C. I. cover with bolts

and nuts etc. complete.

Providing and laying Plain / Reinforced cement concrete

of cement, sand and metal (20mm to 25 mm size) in

16 following proportion laid in situ including centering

shuttering ,temping, smooth finishing and curing for all

lead and all lift.

Providing and Fixing ISI Mark following class &

diameter of different type of valves with necessary

fittings of standard design and specification including

testing with all leads and lifts etc. complete.

(1) Air valve (Double acting) - 50mm diameter 2.00 Nos. 2903.75

Providing and Fixing following class & dia of different

type of valves as per IS with necessary fittings of

standerded design and specification incl. testing with all

leads and lifts etc.complete.

(1) Reflux valve 200mm diameter 1.00 Nos. 17486.13

Fourteen lakh Fourty four thousand Three hundred and thirteen rupees and fifty five paisa only

I/We am/are willing to carry out the work at _______ % above/below ( percent

should be written in figures and in words ) of the estimated rates mentioned above.

Amount of my/our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Signature of contractor Executive Engineer

Panchayat Irrigation Division