Urgent Repair to burnt HT bushings of HT Metering Cubical Panel with consumer No- HT- 170019005154 including providing Straight through joint and End terminationh joint to HT cable of size 95 Sqmm 3 core at MRS Ambedkar chowk Aundh Road CQA ME loc

Urgent Repair to burnt HT bushings of HT Metering Cubical Panel with consumer No- HT- 170019005154 including providing Straight through joint and End terminationh joint to HT cable of size 95 Sqmm 3 core at MRS Ambedkar chowk, Aundh Road CQA (ME) location under GE (MH & RH) Khadki"I 1. M & L for Dismantling and opening the burnt out going cable end termination joint of 11 KV, 95 Sqmm 3 core, HT cable both incommer and out going cable termination after test report generated by the Metering section of MSEB and taking proper shut down from MSEB and also taking out safely the incomer end termination joint from the metering cubical and providing heat shrinkable straight through joint for 11 KV (Earthed) cable of size 95 Sqmm 3 core with jointing material and accessories to the incomer and outgoing HT cable 95 sqmm 3 core of metering cubical as a temperory measure in order to provide unintrupted power supply to CQA (ME) location complete all as specified and as directed at site. 2. M & L for Dismantling and taking out burnt HT bushings of out going side of metering kiosk panel and fixing new HT bushings with copper bus bar complete with insulation - 03 Nos with suitable size of nuts, bolts and washers/gaskits complete all as specified and as directed at site. - 3 Nos 3. M & L for painting the complete metering cubical from out side and inside with two coats of synthatic enamelled paint of high quality after applying a coat of red oxide primer. The painting work is to be done after scrubing the old paint surface with the help of sand paper and grinder. The colour coading of the metering cubical is smoke grey complete all as specified and directed.- 1 Job 4. Meggering the CT and PT unit of the cubical with HT Megger in order to check the polarity, IR values and servicibility of the HT Energy meter complete all as specified and as directed.- 1 Job 5. M & L for Dismantling the straight through joint from the HT cable 95 sqmm 3 core and fixing the End termination joints for incomer and out going cable of metering cubical and fixing it properly to the bushings of the out going and incomer side of the metering kiosk panel with new set of nut bolts and washers/gaskit complete all as specified and directed. Note :- (i) The cable glands is to be fixed properly to the kiosk panel also applying white cement to the minor openings in order to stop the entrance of small inscets. - 2 Nos 6. M & L for cable jointing kit for HT 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm including taking down old cable joint kit all as specified and directed by Engr-in-charge. - 2 Nos 7. Supply and laying of HT underground cable XLPE insulated, PVC bedded round wire armoured electric power cable heavy duty with stranded aluminium conductor 11000 volts grade and cross section area 95 sqmm 3 core confirming to IS 7098/(part-II) 1985 laid in trenches/passing through pipes or fixed on poles/wall/floor etc as specified. - 6 RM 8. Trial/Testing of system upto satisfaction of Engr-in-charge. Note :- 1. The Jobis of urgent nature 2. Gaurantee for six month. 3. Old retrieved materials will be contractor's property, hence sch of credit Rs 1290/- already deducted in the rate analysis. 4. GST % amount to be shown separately.

J.B.Enterprises (BID ID -3096857)

surya systems (BID ID -3093785)

Bharti sales Agency (BID ID -3095326)