Provision of different types of furnitures of the Office of University Branch under Higher Secondary Education, Science and Technology and Biotechnology Department, East Block of Bikash Bhavan during the year 2018 2019 WBPWD/EE/BNWD/NIQ06e/2018-2019

Amount

Workstation 1200W x 600D (ht-1200) Prelam 3B pedestal 350W x 470Dx545H-Top Tiles One Fabric Magnetic & One white marker board -Bottom tile Metal-Metal KeY Board Tray- Metal CPU Trolly Wipro /equivalent Make Vibrant 60 Plus Workstation 1350 x 600 x 1200mm ht 60 mm thick 2 Tile based system with tabletop supported partitions. The data / electrical cutout provision is provided above/below the tabletop and skirting raceway all along the 60 mm partition. One metal fabric board and one marker tile is provided for each workstation (base tile of powder coated metal and all other tiles are of MDF fabric finish).Partition thickness is 60mm for stability and with the inside gap between two tile is approximately 50mm for higher wire carrying capacity.Frame Horizontals are made of 1mm thick CRCA sheets & the verticals are made of Aluminium Extrusions of 1.5mm thick.Frame Horizontals are made of 1mm thick CRCA sheets & the verticals are made of Aluminium Extrusions of 1.5mm thick.All the frames will be duly powder coated based on the choice of the Powder Coat colour , as per Customers choice, which will be inline with the Top trims & end trims.All the frames are fastened together by means of M6 NUTS & BOLTS . They can be attached to form a 2-way, 3-way or a 4-way configuration. All the Caps viz end, inline & universal & raceway caps are made out of Die-cast Aluminum. These caps also are finished in an epoxy powder coating finish in the same color.All the frames are fitted with M10 leveling bolts.Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,BIFMA and SGS certificate for few of its products. Worksurface : Table top - 25mm thk. Pre-laminate particle board with PVC edge banding conforming to IS : 12823 Interior Grade. Specially designed powder coated M.S. brackets fixed to the partition frame support the tabletops. Gable ends are of 25mm thk. both side laminate (BSL) with 2mm PVC imported edge banding on front side. Sealed edge in table top and gable ends are with 0.8mm PVC imported edge banding. PVC edge banding are imported from Rehau or Dolken of Germany.The product must be from a manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,BIFMA and SGS certificate for few of its products. The Pedestal Unit of Dimensions 400W x 470D x 675mmH is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade. All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 2 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with central locking system, where in the three drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit is factory assembled with knock down fittings. The pedestal is fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the 3 drawers.The product must be from a manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,BIFMA and SGS certificate for few of its products. CPU Trolley:- CPU trolley is made from 1mm Thick CRCA steel sheet. The width of the trolley can be varied for accommodating various widths of CPUs; The trolley is mounted on lockable castors from reputed manufacturers in India. The product must be from a manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,BIFMA and SGS certificate for few of its products. Metal Keyboard tray

Kingsley Premimum main table 1500W x 750D x 740H - Kingsley Premimum side table 900W x 425D x 740H Wipro /equivalent make Kingsley Premium Table-1500MM x 750 MM x 740 mm with side table(900 MM x 425 mm) completely made up of particle board conforming to IS : 12823 Interior Grade with post formed finish. Top are with 25mm thk boards with post formation on 2 sides and 2mm PVC edge banding with enhanced scratch resistance supported on 25mm thk. Gable ends and 18mm thk Modesty panels. exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge banding. Separate provision for mounting switches on the wall adjoining the tables shall be made by customer as the tables do not come with switch mounting facility. Wire routing / wire management groumets shall be provided on main or side table as specified by customer.Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,BIFMA and SGS certificate for few of its products.

Kingsley Premimum main table 1200W x 750D x 740H - Kingsley Premimum side table 900W x 425D x 740H Wipro /equivalent make Kingsley Premium Table-1200MM x 750 MM x 740 mm with side table(900 MM x 425 mm) completely made up of particle board conforming to IS : 12823 Interior Grade with post formed finish. Top are with 25mm thk boards with post formation on 2 sides and 2mm PVC edge banding with enhanced scratch resistance supported on 25mm thk. Gable ends and 18mm thk Modesty panels. exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge banding. Separate provision for mounting switches on the wall adjoining the tables shall be made by customer as the tables do not come with switch mounting facility. Wire routing / wire management groumets shall be provided on main or side table as specified by customer.Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,BIFMA and SGS certificate for few of its products.

2 BAY SINGLE STATIC 900L X 450D X 2015 H Providing & supply Wipro /equivalent make of Compactors as per dimension shown in layout with the following specifications:Constrcution:Rigid upright frame made out of 1.2mm thk CRCA steel box pipe.Upright with 25x50mm rectangular slotted pipe with cladding material of 0.7mm CRCA sheet.Complete construction in knock down design for easy handling & design is scalable to add bays in row wise or column wise subsequently.Shelves:Each unit has 6 loading levels formed by 5 loading shelves with a UDL(Uniform distributed load) of 80Kg capacity , 438mm depth,made of 0.8mm CRCA with stiffner.Shelves are mounted on support brackets & adjustable with a pitch of 25mm. Track Material:Aluminium track material with complete track assembly on self suppported design.making the installation grouting free.25mm thk prelaminated particle board walkway to be provided for easy access.& easily adjustable levellers required to keep platform & track parallel on uneven surfaces.Sloping ramp in aluminium for easy trolley access & reduced tipping hazard.no chain system can be offered for this compactor only allumunium base without groting Compactor ,Pulley belt mechanism for reduced noiseless & oil free operation.Ergonomic plastic handle with buit in safety lock mechanism.Central locking to be provided on last unit to lock the entire assembly.Compactor Ht from ground is 2100mm(1985mm body+75mm undercarrriage+40mm channel system).All metal components to be given anti rust surface treatment & powdercoated with epoxy polester powder with a DFT of 60-80 microns.2 bay single static (900x450x2015)

2 BAY SINGLE STATIC 900L X 900D X 2015 H Providing & supply Wipro /equivalent of Compactors as per dimension shown in layout with the following specifications:Constrcution:Rigid upright frame made out of 1.2mm thk CRCA steel box pipe.Upright with 25x50mm rectangular slotted pipe with cladding material of 0.7mm CRCA sheet.Complete construction in knock down design for easy handling & design is scalable to add bays in row wise or column wise subsequently.Shelves:Each unit has 6 loading levels formed by 5 loading shelves with a UDL(Uniform distributed load) of 80Kg capacity , 438mm depth,made of 0.8mm CRCA with stiffner.Shelves are mounted on support brackets & adjustable with a pitch of 25mm. Track Material:Aluminium track material with complete track assembly on self suppported design.making the installation grouting free.25mm thk prelaminated particle board walkway to be provided for easy access.& easily adjustable levellers required to keep platform & track parallel on uneven surfaces.Sloping ramp in aluminium for easy trolley access & reduced tipping hazard.Pulley belt mechanism for reduced noiseless & oil free operation.Ergonomic plastic handle with buit in safety lock mechanism.Central locking to be provided on last unit to lock the entire assembly.no chain system can be offered for this compactor only allumunium base without groting Compactor Ht from ground is 2100mm(1985mm body+75mm undercarrriage+40mm channel system).All metal components to be given anti rust surface treatment & powdercoated with epoxy polester powder with a DFT of 60-80 microns.2 bay twin mobile (900x900x2015)

2 BAY SINGLE STATIC 900L X 450D X 2015 H Providing & supply Wipro /equivalent of Compactors as per dimension shown in layout with the following specifications:Constrcution:Rigid upright frame made out of 1.2mm thk CRCA steel box pipe.Upright with 25x50mm rectangular slotted pipe with cladding material of 0.7mm CRCA sheet.Complete construction in knock down design for easy handling & design is scalable to add bays in row wise or column wise subsequently.Shelves:Each unit has 6 loading levels formed by 5 loading shelves with a UDL(Uniform distributed load) of 80Kg capacity , 438mm depth,made of 0.8mm CRCA with stiffner.Shelves are mounted on support brackets & adjustable with a pitch of 25mm. Track Material:Aluminium track material with complete track assembly on self suppported design.making the installation grouting free.25mm thk prelaminated particle board walkway to be provided for easy access.& easily adjustable levellers required to keep platform & track parallel on uneven surfaces.Sloping ramp in aluminium for easy trolley access & reduced tipping hazard.Pulley belt mechanism for reduced noiseless & oil free operation.Ergonomic plastic handle with buit in safety lock mechanism.Central locking to be provided on last unit to lock the entire assembly.no chain system can be offered for this compactor only allumunium base without groting Compactor,Compactor Ht from ground is 2100mm(1985mm body+75mm undercarrriage+40mm channel system).All metal components to be given anti rust surface treatment & powdercoated with epoxy polester powder with a DFT of 60-80 microns.2 bay single last (900x450x2015)

Smart Fabric mid back chair-SL-1D-Nylon Base -Nylon Castors Wipro make Smart Main chair-Mid back chair The back is made up of 12mm thick (7 layers) hot pressed plywood and moluded back foam upholstered with fabric . The back ply and foam is designed with contoured lumber support for achieving comfortable seating posture. Back rest - Mid Back (HB)470x 790mm (H) X 500mm (W), . The backrest tested for 1,20,000 cycles to be completed with a load of 44.5Kg as per ANSI / BIFMA X5.1.The seat is made up of 12mm thick (7 layers) hot pressed plywood and moluded seat foam upholstered with fabric / Leatherette. Seat Size 490mm (W) X 500mm (D). The seat tested for 1,00,000 cycles to be completed with a load of 57kg impact force on the seat as per ANSI / BIFMA X5.1. ADJUSTABLE ARM : The armrests made up of black integral skin polyurethane with 40-55 Shore Hardness and reinforced with 2mm thick M.S. insert. Arm pad size 258mm (L) x 112mm (W). The armrests are fitted to the seat with seat/armrest connecting strip assembly made of 6mm thick. HR steel. Arm rest available in 1D arm rest with height adjustable up to 70mm, Arm rest tested for 60,000 Cycles to be completed with load of 40Kg as per ANSI / BIFMA X5.1.SINGLE POINT LOCK : Conventional mechanism with one lever control for lock and seat height adjustment. Mechanism made out of MS Plate thickness is 3mm and seat is tilting angle is 3°~10°. and back tilting angle is 87°~106°. Also it has the back tension adjustment knob. Mechanism tested for 3, 00,000 Cycles as per ANSI / BIFMA X5.1.Gas lift pipe diameter 50mm and has an Height adjustment stoke of 120mm. Gas lift tested for 1, 00,000 Cycles as per ANSI / BIFMA X5.1. Meets DIN 4550 Class 3 and all applicable ANSI/BIFMA, EN performance standard .NYLON BASE : The base made up of injection moulded in black glass filled nylon and fitted with 5Nos twin wheel castors. The base is 640mm pitch circle dimeter. The base tested for static load of 1134Kg as per ANSI / BIFMA X 5.1. NYLON CASTORS : The twin wheel castors are injection mouled in nylon and diameter of Castor 50 mm. The castors are tested for 1,00,000 Cycles as per ANSI / BIFMA X 5.1.Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,BIFMA and SGS certificate for few of its products.

Smart Fabric high back chair-SL-1D-Nylon Base -Nylon Castors Wipro /equivalent make Smart Main chair-HB chair The back is made up of 12mm thick (7 layers) hot pressed plywood and moluded back foam upholstered with fabric . The back ply and foam is designed with contoured lumber support for achieving comfortable seating posture. Back rest - High Back (HB) 790mm (H) X 500mm (W), . The backrest tested for 1,20,000 cycles to be completed with a load of 44.5Kg as per ANSI / BIFMA X5.1.The seat is made up of 12mm thick (7 layers) hot pressed plywood and moluded seat foam upholstered with fabric / Leatherette. Seat Size 490mm (W) X 500mm (D). The seat tested for 1,00,000 cycles to be completed with a load of 57kg impact force on the seat as per ANSI / BIFMA X5.1. ADJUSTABLE ARM : The armrests made up of black integral skin polyurethane with 40-55 Shore Hardness and reinforced with 2mm thick M.S. insert. Arm pad size 258mm (L) x 112mm (W). The armrests are fitted to the seat with seat/armrest connecting strip assembly made of 6mm thick. HR steel. Arm rest available in 1D arm rest with height adjustable up to 70mm, Arm rest tested for 60,000 Cycles to be completed with load of 40Kg as per ANSI / BIFMA X5.1.SINGLE POINT LOCK : Conventional mechanism with one lever control for lock and seat height adjustment. Mechanism made out of MS Plate thickness is 3mm and seat is tilting angle is 3°~10°. and back tilting angle is 87°~106°. Also it has the back tension adjustment knob. Mechanism tested for 3, 00,000 Cycles as per ANSI / BIFMA X5.1.Gas lift pipe diameter 50mm and has an Height adjustment stoke of 120mm. Gas lift tested for 1, 00,000 Cycles as per ANSI / BIFMA X5.1. Meets DIN 4550 Class 3 and all applicable ANSI/BIFMA, EN performance standard .NYLON BASE : The base made up of injection moulded in black glass filled nylon and fitted with 5Nos twin wheel castors. The base is 640mm pitch circle dimeter. The base tested for static load of 1134Kg as per ANSI / BIFMA X 5.1. NYLON CASTORS : The twin wheel castors are injection mouled in nylon and diameter of Castor 50 mm. The castors are tested for 1,00,000 Cycles as per ANSI / BIFMA X 5.1.Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,BIFMA and SGS certificate for few of its products.

Smart Fabric Cantilever Chair - Wipro /equivalent make Smart Visitor cantilever Chair .The back is made up of foam upholstered Ply having High resilience foam on the back. The complete back is contoured to provide the needed lumbar support for long seating hours. The seat is made up of moulded foam, upholstered with mesh fabric having high tensile strength. Back Rest :- 790mm High and 500mm Width, Seat :- 460mm width and 470mm depth, Seat to Back rest height :- 650mm.Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,BIFMA and SGS certificate for few of its products.

M. B. ROY

Wipro Enterprises Limited

SANKAR FURNITURE

NUTECH OFFICE SYSTEM PVT LTD