Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23,200Accepted-Finance | L1 | Accepted-Finance Financially Qualified | |
| 2 | L2₹23,690+₹490 (2.11%)Accepted-Finance | L2 | Accepted-Finance Financially Qualified | |
| 3 | L3₹24,101+₹901 (3.88%)Accepted-Finance | L3 | Accepted-Finance Financially Qualified |
Tender Value
₹31,000
Closing Date
6 Oct 2022, 6:55 pmClosed
EXECUTIVE ENGINEER MECHANICAL DIVISION BARAMULLA
THE EXECUTIVE ENGINEER MECHANICAL DIVISION BARAMULLA
Fabrication of Trash Guard for Hydraulic Radiators, Engine Radiator and Rear Bumper of Unimog U-400 of Field Sub Division Pattan.
2022_PWDJK_187645_1
MDB/TS/e-TENDER/2022-23/103
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
7 days
Baramulla
Please refer Tender documents.
7 documents required · 7 mandatory
₹200
EXECUTIVE ENGINEER MECHANICAL DIVISION BARAMULLA
13 Oct 2022
9 Sept 2022
7 Oct 2022
9 Sept 2022
6 Oct 2022
9 Sept 2022
Amount
Fabrication, Providing and fitting of MS Guard fabricated out of 25/25/5 mm ISA, 25 mm flate strip and 25mm/25mm MS Wire Mesh of weight 2.6kg/Sq. for Hydraulic Radiator on R/S of Machine. The cuboidal frame is to be fabricated out of ISA 25/25/5 of dimensions 2.5’ by 3’ by 0.75’ and then enveloped by 25/25 mm wire mesh on three sides.Middle area between the corners is to be reinforced with MS Flat strip of 25mm/5mm. One of the 2.5’ by 3’ side is to be kept without wire mesh. The assembly is to be fixed with chassis by nut and bolt. Complete job.
Fabrication, Providing and fitting of MS Guard fabricated out of 25/25/5 mm ISA, 25/5 mm strip and 25mm/25mm MS Wire Mesh of weight 2.6kg/Sq. for inter cooler on L/S of Machine. The cuboidal frame is to be fabricated out of ISA 25/25/5 of dimensions 2.5’ by 3’ by 0.75’ and then enveloped by 25/25 mm wire mesh on three sides. Between the two corners, reinforcement of MS 25/5mm strip is to be made. One of the 2.5’ by 3’ side is to be kept without wire mesh. The assembly is to be fixed with chassis by nut and bolt. Complete job
Fabrication, Providing and fitting of MS Guard for back side of the machine to avoid any damage while reversing the machine and protection to reverse lights out of ISMC 150/75/6mm of length 12’ and height of vertical members Two feet each. The running length of ISMC 150/75/6mm required is 5m. The assembly is to be connected to Chassis by 19mm Nut and Bolts. Complete Job.
Fabrication and providing of SS Shear pins for Blower Assembly of Unimog as per drawing.
IMPERIAL MOTORS
M/s Sopore Engineering Works
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .