SPECIAL REPAIR TO 03 X OFFRS TOILET OF OFFICE COMPLEX AND CERTAIN OTHER SANCTIONED WORKS AT PALAMPUR MIL STN

Amount

SCHEDULE 'A' PART-I:- Demolition of stone/boulders or brick masonary built in cment mortor including all quoins, arches, pillars, etc but excluding ashlar facings, dresses stone work and precast concrete articles etc, complete all as specified.

Taking down chowkats or frames with shutters (without taking of shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm each complete all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint complete all as specified and directed.

Factory made High density fibre panel board door shutter made of good quality timber frame having door facing plates 3.2mm thick. Core shall be machine filled rigid PUF of density 45 Kg/cum. HDF door conform to IS 15380 and of 30mm thick, complete all as specified and directed.

S&F for 100mm size butt hinges medium weught , cold rolled MS and fixed complete.

S&F for 150mm size aluminium anodised, barrel tower bolts, of extruded section and fixed complete.

S&F for 150mm size Handles extruded aluminium alloy handles,fabricated type anodised complete.

S&F for 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast-aluminium alloy and fixed complete.

S&F for 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door/windows stops and the like, including all necessary' labours; articles n exc 200 cu. cm each including butt hinges, size 50 mm, medium weight, cold rolled mild steel, and fixed complete all as specified.

S&F for steel work such as in hold fasts conforming to similar articals Fe-290 Gde E-165, complete all as specified.

M&L for PCC type B1, 1:2:4 (using 20mm graded stone aggregate) as in hold fasts/ bed blocks/ coping etc, all as specified.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Using 20 mm graded aggregate) as slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves etc, complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc, also splays between floors and beam, etc, to rough finished surface of concrete complete all as specified and directed.

S&F for vitreous china English type WC, wall mounted, one piece closet of size 645 x 355 x 725 mm 'S' trap (12 inch) including connection to trap and to flushing pipe, complete all as specified. Make:- Jaquar Cat part No. CM-WHT-103851S/Johnson/Cera/Hindware or equivalent as approved by GE

S&F for vitreous china counter WHB of size 355 x 350 x 145 mm including connection to trap, complete all as specified. Make:- Jaquar Cat part No. ECS-WHT-901/Johnson/Cera/Hindware or equivalent as approved by GE

S&F for center hole WHB brass CP mixture for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified. Make:- Jaquar Cat part No. TQT-527/ESS ESS/Marc/GEM or equivalent as approved by GE

S&F for Vitreaus china bowl gents urinal, size of 280 x 345 x 690 mm white a superior blend of contemporary styles and meticulous finish with high functionality with grating and union for discharge pipe (excuding flushing cistern, flush pipe and waste pipe) complete urinal against wall in cement mortar 1:2, securing long brass screws, pointing around urinal back in cement complete all as specified. Make:- Hindware Cat part No. white Rhine-96008/Johnson/Cera/Hindware or equivalent as approved by GE

S&F for 5 litre capacity PVC low level auto cistern for urinal valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, PVC connection 15 mm size with PTMT nuts of length 450 mm and with CP brass coupling & PVC washer at both ends, complete all as specified. Make:- Jaquar Cat part No. WHE-WHT-183L / CERA /Parryware / Hindware or equivalent as approved by GE

S&F for fancy type long body bib taps 15 mm bore dia, cast copper alloy, chromium plated, screwed for iron pipe and fixed Make:- Jaquar Cat part No. SQT-512KN/ESS ESS/Marc/GEM or equivalent as approved by GE

S&F for CP hand shower (health faucet, ABS Body) with 1 meter long PVC tube and wall hook, complete all as specified. Make:- Jaquar Cat part No. ALE-ESS-593/ESS ESS/Marc/GEM or equivalent as approved by GE

S&F for CP toilet paper holder superior quality, complete all as specified. Make:- Jaquar Cat part No. AEC-1151/ESS ESS/Marc/GEM or equivalent as approved by GE

S&F for CP brass soap dish, superior quality, complete all as specified. Make:- Jaquar Cat part No. AEC-1131/ESS ESS/Marc/GEM or equivalent as approved by GE

S&F for 1800 x 600mm bevelled edge mirror of superior quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plates, brass screws and cup washers, complete all as specified.

S&F for Brass CP towel rail 450 mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170 gms), complete all as specified. Make:- Cat part No. Jaquar AEC-1111 ESS ESS/Marc/GEM or equivalent as approved by GE

S&F for PVC side corner suparior quality alongwith bracket for fixing, complete all ad specified.

M&L for granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and including 15 mm thick screed bed in cement mortar 1:6 laying floor, complete all as specified.

Demolition of cement concrete (unreinforced) in ground floor including tiles and in paving n exc. 15 cm thickness (below or above ground level) complete all as specified.

M&L for 25 mm thick PCC 1:2:4, type B-O (using 12.5 mm graded crused stone aggregate) as in floors finished rough to receive floor finishes, complete all as specified.

M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:4, for laying floor finish, complete all as specified.

M&L for Non skid ceremic coloured floor tiles (square/rectangular) area of each tile 600 x 600 mm & 9 to 10 mm thick etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

Taking down cement plaster on brick work or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 250 x 600 mm x 9 to 10mm thick as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified.

Aluminium anodised powder coated chowkhats frames of section 100 mm x 44.45 mm x 3 mm for fixer type openings/windows, fully glazed without using sash bars with and including neoprene rubber packing & aluminium snap beading of suitable size etc, complete al as specified.

S& F for 3 to 4 mm thick aluminium composite panel comparising of two layers of aluminium sheet sandwiched with polythene core, the top layer of aluminium sheet shall be PVDF coated, complete all as specified & directed.

S&F for Aluminium anodised powder coated frame for doors, windows with one or more rebates including joining cleat for fixing etc, complete all as specified.

S&F for Aluminium anodised powder coated doors having frame of size 100 x 44.50 x 3 mm thick & shutter having stile size 100 x 44.50 x 3 mm & rail size 150 x 44.50 x 3 mm thick with traingular aluminium beading of 15 mm size & neoprene rubber packing for fixed glass making air tight including 5.50 mm thick tinted glass at upper panel of shutter & aluminium finish boards on lower panel, complete all as specified.

S&F for Rotational moulded polythelene water storage tanks 1000 ltrs capacity, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part- I, complete all as specified.

Taking up or down old 15 mm bore steel tubing fixed to wall and ceiling or laid in floor, with all fittings and fixtures and short lengths including cleaning for refixing, removal to store,complete all as specified.

Taking up or down old 20mm bore steel tubing fixed to wall and ceiling or laid in floor, with all fittings and fixtures and short lengths including cleaning for refixing or removal to store, complete all as specifed .

S&F for steel tubes, 15 mm bore, galvanised, " medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed

All as per the description of serial item No. 42 above but except GI tubing complete all as specified.

S&F for steel tubes, 20 mm bore, galvanised, " medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed

All as per the description of No. 44 above but except GI tubing complete all as specified.

M&L for PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls in repair, 75mm bore, complete all as specified.

M&L for PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tenches or in floors as in repair, 75mm bore, complete all as specified.

M&L for PVC (SWR) 75mm bore, floor trap with grating including jointing with solvent cement, fixed in repair, complete all as specified.

M&L for PVC (SWR) bends of 75mm bore pipe, complete all as specified.

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to wall, ceiling, floors etc, 110mm bore of pipe (fixed in repair), complete all as specified.

M&L for PVC (SWR) bends of any radius for 110mm bore pipe (fixed in repair), complete all as specified and directed.

M&L for 110 mm Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), Complete all as specified.

Construction of septic tank for 20 users (Brick construction with sub class 'B' bricks using old size bricks), complete all as specified and shown on drawings No CEPZ/C-TD/013/13 sheet No 1/5 to 5/5 dated 11.09.2013

Construction of soakage well 1.20m dia and 3.00m deep below (Brick construction with sub class 'B' bricks using old size bricks) inlet pipe level (depth from ground level to below the inlet pipe 45cm)complete all as specified and shown on drawings No CEPZ/C-TD/013/13 sheet No 1/5 to 5/5 dated 11.09.2013

Provn of 150 mm dia SGSW pipes exc, in ordinary soil at average depth of 1.5 m, inclusive of manholes RCC precast manhole cover having 6mm MS plate embedded all around/fibre reinforced cover with angle iron frame pipes laid on PCC bedding including packing under and haunching against sides, complete all as specified.

Excavation in trenches, not exceeding 1.5m wide and not exc 1.5m in depth for foundation, and getting out in any type of soil, complete all as specified and as directed .

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed .

Plain cement concrete 1:5:10 type E-2 using 40mm graded aggregate as in foundation filling & mass concrete complete all as specified and directed.

PCC M-15 (Nominal mix) using 20mm graded crushed stone aggregate as in coping benching and the like including weathering, slightly rounded or chamfered angles and directed including form work and finishing complete all as specified and directed.

Precast cement concrete type B-0 1:2:4 (using 12.5mm graded aggregate) set in cement mortar 1:4 as in louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

Brickwork with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete, all as specified and directed.

Returning, filling in (soil), including spreading, levelling, watering and well ramming in layers not exc. 25cm, complete all as specifed and as directed.

75mm thick, Plain cement concrete, M-7.5 (Nominal Mix) type (1:4:8 ) D-2 (using 40mm graded crushed stone aggregates), as in sub base flooring finished even and fair without using extra cement, complete all as specified and directed.

Sand filling under floors or in foundation incl watering and consolidation complete all as specified and directed.

Machine pressed precast concrete interlocking paver block laid in floor , any shape and size conforming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement & pigment, complete all as specified and directed.

Rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls, finished even and fair without using extra cement, complete all as specified and directed .

Removal of excavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

Plain cement concrete M-15 (Nominal mix) type B-1 (using 20mm graded crushed stone aggregate) as in in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, etc, fixed with self tapping screws, complete all as specified and directed.

Plain cement concrete 1:4:8 type D-2 using 40mm graded aggregate as in foundation filling & mass concrete complete all as specified and directed.

Hard core of broken stone or boulders of guage n. exc 63mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

150mm PCC 1:2:4 (Nominal Mix) type B-1 (using 20mm graded crushed stone aggregates) as in hardstanding finished even and fair complete all as specified and directed

Forming Contraction (Dummy) joints 65mm deep x 10mm wide and used to edges primed with primer suitable for sealing compound and filled with sealing compound Grade 'A', complete all as specified and directed.

SCHEDULE 'A' PART-II:- Taking down carefully unserviceable Aluminium/Copper point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custody for taking credit (credit for above item should be made as per condition seperatly) and making good disturbed surfaces of walls, floor etc complete all as specified.

Point wiring for one light point controlled by one switch 5 amp one way using cable 1.5 sqmm for phase and neutral and 1.5 sqmm for earthing and connected to common earth duly using FRLSH PVC insulated unsheathed multistrand copper conductor cable with proper colour coding concealed type, drawing in and incl PVC conduit 25mm dia having wall thickness not less than 2 mm and incl suitable sunken box for fix switch and socket incl cover plate for required module for mounting switches socket etc making connection and making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per the description of serial item No 77 here-in-before but for one fan point/Exhaust fan controlled by one, one way switch and regulator complete all as specified.

All as per the description of serial item No 77 here-in-before but for 3 pin socket outlet 5 amp independent board complete all as specified.

All as per the description of serial item No 77 here-in-before but for 3 pin socket outlet 15 amp independent board with cable of size 2.5 sqmm in point wiring and 1.5 sqmm in contionous earth wire complete all as specified.

Switch modular single pole one way 6 amp complete all as specfied.

Socket modular 5 pin 6 Amp complete all as specfied.

Switch modular single pole one way 16 amp complete all as specfied.

Socket modular 3 pin, 6/16 amp complete all as specfied.

Ceiling rose surface type 65mm x 50mm 3 terminal complete all as specfied.

Supply and fixing LED tube light fitting suitable for 1x18W, 4 FT complete with LED tube rod, fixed complete to wall/ceiling and PVC round block (02 Nos) of suitable size etc provided complete incl provn of flexible wire 3 core of size 23/.0076 from ceiling rose to connector with flexible pipe of suitable size of all complete all as specified. Make - Halonix Cat Part No HLIB-05-118T8 with LED tube Cat part No HLT84DPC18CW or equivalent in Havells / Bajaj / CG

Supply and fixing Integral sleek extruded polycarbonate LED channel 5 watt with white acrylic cover batton integrated from ceiling rose to connector complete all as specified. Make: Halonix Cat Part No. HLB-07-05 / Havells / CG / Bajaj

Taking down old unserviceable light fittings of any type and model complete and making good the disturbed surface complete all as specified.

Taking down old unserviceable exhaust fan PVC body any type/size, supply and fixing of exhaust fan AC single phase 240 V of size 250 mm sweep 1400 RPM with louvers shutter and making hole in brick/stone wall if required at site and making good disturbed complete incl provn of flexible wire 3 core of size 23/.0076 from ceiling rose to exhaust fan all as specified and directed. Make - Bajaj / Havells /CG. Note:- Old unserviceable exhaust fan to be deposited in MES store yard.

ranbir singh and Co Govt Contractor and Transporter

BHARDWAJ BUILDERS