PROVISION OF TILING AT FIRST AND SECOND FLOOR AT VARUNA APARTMENT ELAMKULAM KOCHI AND ADDITION ALTERATION AND SPECIAL REPAIRS TO BOUNDARY WALL AT DERA COMPLEX PANAMPALLY NAGAR KOCHI

Amount

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc complete all as specified and directed.

Dismantling floor/hearth and wall tiling including cement mortar bedding (but not backing), removing servicable tiles and rubbish off the premises complete all as specified and directed.

M&L for non - skid ceramic coloured tiles tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for non - skid ceramic coloured tiles tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in vertical surfaces such as skirting/dado etc. set and jointed in neat cement slurry and pointed in coloured cement to match over including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M/L for glazed coloured ceramic tiles of size 300 x 600 x 7 mm thick in vertical surfaces set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade over 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for cement plaster 15 mm thick in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement plaster 15 mm thick in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distmper over a coat of primer including 3mm thick wall care putty complete all as specified and directed.

Demolition of brick/block work or stone/boulder masonery, built in cement mortar, including all quoins, pillars etc but excluding ashler facing, dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Taking down shutter exc 1 sqm but not exc 2.00 sqm each and refixing in the same opening complete all as specified and directed.

S&F in repairs 100 dia doom type PTMT grating (minimum weight 25 gms) complete all as specified and directed.

S& F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring 140mm complete all as specified and directed.

M&L for pre cast cement concrete block masonry Type C1 1:3:6 (20 mm graded stone aggregate) with solid blocks, exc10cm in width and setting in CM 1:6 complete all as specified and directed.

Demolition of cement concrete in ground floors and paving or coping etc n exc.15cm thick (below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 Type B1 using 20mm graded stone aggregate as in coping, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of antifungal paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of antfungal paint over a coat of primer complete all as specified and directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia E34 barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured)complete all as specified and directed.

Cutting holes through walls built in cement mortar of superficial area exc 150 sqcm and not exc 400 sqcm and making good with PCC 1:2:4 complete all as specified and directed.

S&F mild steel posts and struts in fencing including tops to shape as directed, drilling holes, notching for wire, etc. flat iron filets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work confirming to Fe-209 Gde E-165 complete all as specified and directed.

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end secrewed the other, or screwed the both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long dia of neck 11 to 15mm complete all as specified and directed.

M&L for preparation of new surface of steel of any description not exc 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description not exc 10cm width or girth, not otherwise described and applying one coat synthetic enamel paint complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for and including fencing complete all as specified and directed.

M&L for framed work such as grill grating framed guard bas framed door, gates including pintel ginges stops, hand made sliding bolt etc conforming to cast iron FG Gde E 150 complete all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismatling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. N.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L for cement concrete in foundations, filling and mass concrete 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and as directed.

M&L for RCC 1:1.5:3 (Nominal mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs and mass concrete complete all as specified and as directed.

M&L for RCC 1:1.5:3 (Nominal mix) using 20mm graded stone aggregate for Columns, piers, pillars and struts complete all as specified and as directed.

M&L for form work to flat rough finished surfaces of sides of concrete foundation footing bases of column and plinth beam for fair finished surfaces complete all as specified and directed.

M&L for form work to flat rough finished surfaces of sides of pillars, posts, struts, piers, columns and stanchions complete all as specfied and directed.

M&L for TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for col hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as specified and directed.

All as per item No. 39 above but for 8 mm dia TMT bars in stirrup complete all as specified and as directed.

Returning filling in foundation including spreading levelling watering and well ramming in layers n exc 25cm with soft/loose soil complete all as specified and directed.

Removing excavated soil exc 200 m but n. exc 1.5 KM and depositing where directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete cnforming to Fe.290 Gde-E-165 complete all as specified and directed.

S&F 20cm height, 15cm width and 2mm depth of stainless steel letters (hollow) with 1.5mm thick stainless steel sheet, glossy finish including fixing charges complete all as specified and as directed.

M&L for 18 to 20mm thick Granite (of any type) work(table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and 15 mm thickrendering in cement mortar (1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite machine cut polished granite 1st quality complete all as specified and as directed. (Note: Sample of granite shall be approved by GE before execution of work.)

Bell Builders (BID ID -3358694)

Oriental Constructions (BID ID -3360191)

S&C ENTERPRISES (BID ID -3361093)

S A ENTERPRISES (BID ID -3361220)

Aarjay Tech Engineering (BID ID -3358882)

Anaswara Constructions (BID ID -3360094)

Kuriako Mathai and company (BID ID -3360375)

K THOMAS AND COMPANY (BID ID -3360908)

SUKU CONSTRUCTIONS (BID ID -3360234)