Municipal General Funds

Provision towards Geological Survey Charges excluding taxes

Drilling of Bore well 165 mm dia. up to 90.00 m depth by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.

Drilling of Bore well 165 mm dia. above 90.00 m up to 150.00 m depth by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.

Supply, Delivery and Fixing of 250mm dia OD Unplasticised PVCs Pipes 6 Kg/cm2 Casing Pipe of 6 mts lengths for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.

Supply, Delivery and Fixing of 180mm dia OD Unplasticised PVCs Pipes 6 Kg/cm2 Casing Pipe of 6 mts lengths for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.

Providing of 180 mm dia PVC Casing pipe perforation charges per RM

Supply & Fixing of 180 mm dia Bore Cap with 12mm guage M.S Sheet etc. complete as directed by the Engineer in charge of the work.

Supply and Transportation of 5.00HP, 12-16 Stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well.

Installation charges of pupmpsets, including erection charges, earthing and testing etc. Complete as Directed by the Engineer in charge of work.

Fabrication, Transportation and Supply of Wall Mounted Control Panel Board of Upto 7.5 HP with DOL Starter of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable Capacitor With Reputed Make.

Supplying & fixing of 3 Core 2.5 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. With Reputed Make.

Supply of 16 Sq mm ISI Marked WPSC (Weatherproof Single Core) ISI Aluminum Wire. With Reputed Make.

Supply and fixing of 50mm GI ‘B’ Class Pipe of Various Sizes and Transportation anywhere in Andhra Pradesh, Excluding GST.

Supply, delivery and fixing Gunmetal (GM) Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 50 mm NB Size 2" including cost and conveyance of all materials charges and labour charges etc complete and as directedcted by the Engineer in charge of the work.

Supply and fixing of 32mm GI ‘B’ Class Pipe of Various Sizes and Transportation anywhere in Andhra Pradesh, Excluding GST.

Supply and fixing of 15mm GI ‘B’ Class Pipe of Various Sizes and Transportation anywhere in Andhra Pradesh, Excluding GST.