Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹7.5 L
Closing Date
27 Jun 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Neeravari Nigam Limited
GIRISH C METI
RENOVATION TO QUALITY CONTROL SUB -DIVISION OFFICE,MUNIRABAD (SC CATEGORY)
KNNL/2023-24/IW/WORK_INDENT1062/CALL-2
KNNL/2023-24/IW/WORK_INDENT1062/CALL-2
Reserved
Irrigation and Other Works
Two Tender Document System(Two Cover)
KNNL Division TR Div No 1 Munirabad
20 documents required · 20 mandatory
Participation as a contractor, in at least one contract that has been satisfactorily and substantially completed within the last 5 (five)years and that is similar to the proposed works, where the value of the Bidders participation exceeds INR 37.49 Lakhs The similarity of the Bidders participation shall be based
1.For the above or other contracts executed during the period stipulated in 2.4.1, a minimum construction experience in the following key activities 1.3-track x 2-panel sliding windows 27.83 Sqm 2. Mathi/Nandi Wood frames of Doors and Windows 2.512 Sqm 3. G S Sheet Roofing 388.35 Sqm in any one financial year during the last 5 financial years i.e., from FY 2018-19 onwards
Minimum average annual construction turnover of INR 112.47 Lakhs, calculated as total certified payments received for contracts in progress or completed, within the last three 3 years
The Bidder must demonstrate that its financial resources defined in FIN - 3, less its financial obligations for its current contract commitments defined in FIN - 4, meet or exceed the total requirement for the Subject Contract of INR 37.49 Lakhs
BID CAPACITY Assessed liable tender capacity (AxNx2.5 - B)
Bidders from India should, however, be registered with the Government of India or other State Governments or Government of India, or State or Central Government Undertaking
SC Category Contractors should upload a scan copy of Caste Certificate Issued from competent Authority
SC Category Contractors should be Domicile of State of Karnataka for more than 10 years and should upload a copy of Domicile certificate issued by compete tent Authority
GST Registration
Nationality in accordance with ITB 4.2
No conflicts of interest in accordance with ITB 4.3
Not having been declared ineligible by the Bank, as described in ITB 4.4
Bidder required to meet conditions of ITB 4.5
Not having been excluded as a result of prohibition in the Borrowers country laws or official regulations against commercial relations with the Bidders country, or by an act of compliance with UN Security Council resolution, both in accordance with ITB 4.8 and Section V
Non performance of a contract did not occur as a result of contractor default since 1st JANUARY 2018
Not under suspension based on execution of a Bid-Securing Declaration pursuant to ITB 4.6
All pending litigation, arbitration, or other material events impacting the net worth and/or liquidity of the bidder, if any, shall be treated as resolved against the Bidder and so shall in total not represent more than. 50 percent of the Bidders net worth calculated as the difference between total assets and total liabilities
Declare any contracts that have been suspended or terminated and/or performance security called by an employer for reasons related to the non-compliance of any environmental, health and safety contractual obligations in the past five years
Submission of audited financial statements or, if not required by the law of the Bidders country, other financial statements acceptable to the Employer, for the last Five years to demonstrate the current soundness of the Bidders financial position. As a minimum, the Bidders net worth for the last year, calculated as the difference between total assets and total liabilities should be positive
For the contracts in 2.4.1 and 2.4.2 above and/or any other contracts substantially completed and under implementation as prime contractor, Joint Venture partner, or Subcontractor between 1st January 2018 and Bid submission deadline, experience in managing EHS risks and impacts in the following aspects 1) Working at height in execution of plastering & Painting works. 2) Must have experience in managing works with EHS and Safety aspects as mentioned in Section 6 of General Specification sand additional Specifications of this document
₹1,880
₹7.5 L
28 May 2024
28 May 2024
29 Jun 2024
11 Jun 2024
11 Jun 2024
RENOVATION TO QUALITY CONTROL SUB -DIVISION OFFICE,MUNIRABAD
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area Complete with all lead and lifts and as directed by the engineer incharge of ...
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area Complete with all lead and lift...
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area Complete with all lead and lifts and as ...
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area Complete with all lead...
Dismantling roofing including ridges,hips,valleys and gutters etc.,and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.Asbestos cement sheet
Dismantling roofing including ridges,hips,valleys and gutters etc.,and stacking the material to the appropriate disposal area Complete with all lead and lifts and as directed by the engineer incharge...
Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches, cost of labour, Complete with all lead and lifts...
Removing the old paint from steel and / or other metal surface with paint remover of approved brand / manufacturer cleaning and making surface even including cost of material, labour, Complete with a...
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall includi...
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth Complete with all ...
Providing and laying vetrified Tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and comforming to IS: 15622, of approved brand & manufact...
Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished with a floating coat of neat...
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Complete with all lead and lifts and as directed by the engineer incharge of the ...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,incl...
Providing & fixing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G....
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Providing and fixing flush door shutter made out of solid core block board type,well seasoned ,chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door ...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete ...
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. Complete with all lead and lifts and as directed by the engineer incharge of the work.
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g. Complete with all lead and lifts and as directed by the engineer in...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments .32mm dia PVC Elbow Complete with all ...
Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.32mm dia PVC Tee Complete with all lead ...
Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.32mm dia PVC Bend Complete with all lead ...
Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.32 mm dia PVC REDUCER Complete with ...
KSRB 13-11 : Providing and placing on terrace, polyethylene water storage tanks as per IS 12701:1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, ou...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved Complete with all lead and lifts a...
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan Complete with all lead and lifts and as directed by the engineer incharge of the work
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia Flexible pipe Complete with all lead and lifts and as directed by the engineer incharg...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers Complet...
Providing and fixing toilet paper holder.C.P. bras Complete with all lead and lifts and as directed by the engineer incharge of the work
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with t...
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 Complete with all lead and lifts and as directed by the engineer incharge of the work
Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.25 mm diameter Complete with all le...
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc.125x65x2.12mm Complete with all lead and lifts and as directed by the engineer incharge of the work
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjace...
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make Complete with all lead and lifts and as directed by the engineer incharge of the work
Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,this includes jointing of p...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...
Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws et...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all Complete with ...
Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Ty...
Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Ty...
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with...
Providing and fixing chromium plated brass butt hinges with 100x70x4 mm (ordinary type)necessary chromium plated brass screws etc. Complete with all lead and lifts and as directed by the engineer inc...
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :100x10mm Complete with all lead and lifts and as directed by the engineer incharge of the wor...
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws. Complete with all lead and lifts and as directed by the engineer incharge of the...
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.Double strip (horizontal type) Complete with all lead ...
Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc Complete with all lead and lifts and as directed by the engineer incharge of the work
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 65mm Complete with all lead and l...
Providing and fixing bright finished brass handles with screws etc. complete:Brass handles 100 mm with plate 150x32 mm Complete with all lead and lifts and as directed by the engineer incharge of the...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring,strutting, barricading, caution l...
Providing and laying in position plain cement concrete for levelling course for all works in foundation.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machin...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building ,Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building ,Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building ,Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building ,Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building ,Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The ...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Complete with all lead and lifts and as directed by the engineer incharge of the ...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjace...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned ,chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Door Fixtures-Providing and fixing bright finished brass handles with screws etc. completeBrass handles 125 mm with plate 175x32 mm Complete with all lead and lifts and as directed by the engineer in...
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. Complete with all lead and lifts and as directed by the engineer incharge of the work
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc.125x65x2.12mm Complete with all lead and lifts and as directed by the engineer incharge of the work
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete with all lead and lifts and ...
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of...
Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of nea...
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) inc...
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved Complete with all lead and lifts a...
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan Complete with all lead and lifts and as directed by the engineer incharge of the work
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia Flexible pipe Complete with all lead and lifts and as directed by the engineer incharg...
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 Complete with all lead and lifts and as directed by the engineer incharge of the work
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g. Complete with all lead and lifts and as directed by the engineer in...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring confirming to IS : 5383, leaving 10mm gap for termal expan...
Providing and fixing Chlorinated poly venyl cloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,thi...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
KSRB 13-11 : Providing and placing on terrace, polyethylene water storage tanks as per IS 12701:1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, ou...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gr...
Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the...
Medium point above 3 mts upto 6mts from tapping point to outlet via switch
Long point above 6 mts upto 10 mts from tapping point to outlet via switch
Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall...
Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...
Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate
6 amps one way switch
Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate
6 amps two way switch
Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate
stepped fan Regulator's
Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate
Supply and fixing one metal Fan box with round h...
Supply and fixing of Metal Socket set of 20A,230V, 2pole & Earth Plug & Socket on a suitable MS box for incorporating SP/TP MCB( without MCB) ,complete with internal connections with all accessories ...
Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the ...
Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the ...
Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the ...
WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specif...
WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specif...
WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specif...
WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specif...
WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specif...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing 63A DP MCB miniature circuit breaker on the existing MCB distribution board ( Main / EMGPNL)using necessary fixing materials and wiring complete as required
Supplying and fixing 32A DP MCB miniature circuit breaker on the existing MCB distribution board (EMG PNL) using necessary fixing materials and wiring complete as required
Supply of box type suitable for 28W T5 single/twin lamp and suspension mounted luminaire & optical reflector. Prewired with HF electronic ballast, push fit type lamp holders and main contactors. Chann...
Supply of box type suitable for 28W T5 single/twin lamp and suspension mounted luminaire & optical reflector. Prewired with HF electronic ballast, push fit type lamp holders and main contactors. Chann...
Supplying capacitor type 48" sweep ceiling fan complete with down rod blades , shackle canopies etc suitable for operation on 230V 50 cycles single phase AC supply conforming to ISS - 374 - 1979 an...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
2. QC SUB DIV Office_OCB.zip
Tender Document • 0.90 MB
2. Tender Notification_QC Sub Dvn.docx
Others - TENDER NOTIFICATION • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .