Repair replacement of floor plaster plumbing sanitary repair replacement of joinery false ceiling wire gauge glass panes cupboard shutter shelves rolling shutter and misc repair etc in zone II under AGE BR II under GE W Bareilly

Amount

Demolition of brick or stone / boulder work built in cement mortar as in quoins, arches,pillars etc

M&L for Brickwork with fly ash brick in CM 1: 6 straight or curved on plan exc 6 m mean radius .

M&L rendering 15mm thick in CM 1:6 on fair faces of brick or concrete, internal surfaces of walls finished the surface fair and smooth and then prepare the newly plastered surface and applying chalk whitening primer on plastered surface and the apply Two coats of acrylic distemper/distemper oil emulsion (OBD) over a coat of birla putty on new plastered wall surfaces of any description including aking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified.

M&L 15mm thick rendering on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extra. Cement and then applying three coat white wash after preperation of newly plastered surface including aking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified

M&L 15mm thick rendering on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extra. Cement and then applying Two coats of cement base paint on new plastered wall surfaces over a coat of primer of any description including preparation of surfaces, including aking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified

Supply only integral waterproofing compound

M&L 5 mm thick cement plaster on fair faces of bricks or concrete in ceiling using CM 1:4 finished even and smooth without using extra cement and then applying three coat of white wash after preparing the surface including Taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water completely

Demolition of PCC of any description n.exc. 15cm thickness (Un re-inforced).

Demolition stone slabs and tiles of any description or thickness in floors,walls, aprons etc laid bedded and pointing in any mortar

M&L for Machine cut kota stone slab 20-25 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete, over and including 20mm thick screed bed or bedding layer in cement mortar 1: 6, for laying floor finishes all as specified

M&L for Machine cut kota stone slab 15 to 18 mm thick in riser of steps, skirting , dado and pillar laid over cement screed and jointed over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) over and including rendering 10 mm thick in cement mortar 1:4, as in backing layer all as specified

M&L for vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles exec 0.16 sqm and not exceeding 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and witn 15mm thick screed bed 1:6 cement motar including dismantling of tiles of any description or thickness in floors,walls, aprons etc laid bedded and pointing in any mortar complete all as specified and directed

All as per serial item as above but as in vertical surfacesincluding rendering 10 mm thick in cement mortar 1:4, as in backing layer

M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square/rectingular)area of each tiles exceeding 0.11 Sqm (400 x 400mm) but not exceeding 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed 1:6 cement motar including dismantling of tiles of any description or thickness in floors,walls, aprons etc laid bedded and pointing in any mortar complete all as specified and directed.

M&L Glazed ceramic tiles 250 x 375mmx 7 to 8mm/ 450 X 350 X 7 to 8 mm thick on vertical surfaces such as skirting/dado's etc, set and jointed in neat cement slurry and pointed in coloured cement to match colored tiles over 10mm thick in CM (1:4) on brick or concrete surfaces of finished rough to receive the glazed tiles . including demolition of exixting tiles of any description or thickness in walls all as specified and directed by engg-in-charge

M&L for glazed coloured ceramic tiles 300 x 200mm x 7mm thick in vertical wall surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles including rendering 10 mm thick in cement mortar 1:4, as in backing layer including dismantling of existing tiles including mortar complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off single shutter/ double shutter from the frame)exc 1.5 sqm and n exc 4.00 swm incl removing from the premises complete all as spd and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n. exc 1.5 sqm incl removing from the premises complete all as spd and directed

Taking down shutter of any description exc 1 sqm and n/exc 2 sqm each incl removing from the premises complete all as spd and directed

M&L providing FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm ) made out of extruded 5 mm (+- 0.25 mm ) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos Heat bent PVC sheet sections. the inside section of size 90x30 mm shall be made from plain colour PVC sheet of 5 mm (+-0.25 mm ) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS square tube The two vertical door frames are to be reinforced with 40 mm x 20 mm MS tubes of 19 guage through out the farme The door frame shall be fixed to the wall using 8/100 mm long screw through the frame by using anchor fastners. A minimum of 4 nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc complete as per manufacturers specifications and directions of engineers-in-charge

M&L in providing 30 mm thick factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2 nOs PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws etc complete as per direction of engineer-in-charge, manufacturers specification and drawing

S&F 2nd class hard wood chowkhat or frames, plain solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified & directed by Engr-in-Charge

S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165 all as spd and directed .

S& F for Flush shutters, 32 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F 2nd class hardwood glazed and Skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (a) supplied and fitted to chowkhats

S&F 2nd class hardwood glazed and Skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (b)

S&F steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wie gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002 Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (II) rate for filling PCC in frame deemed to be included in quoted rates (iii) MS grill shall be measured and paid seperatly under relevant item of schedule

S&F steel ventilator with top hang shutters with pressed steel frames including hinges, steel peg stay in repairs

S&F in repairs 3.0 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 square metre in each pane, all as specified.

S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 square metre in each pane, all as specified.

S&F 3.0mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5sqm in each pane.

S&F, Galvanised mild steel wire cloth 0.48mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire stapples complete all as specified as directed.

S&F in repairs Galvanised mild steel wire cloth 0.48mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire stapples complete all as specified as directed.

S&F Butt hinges, medium weight, Stainless steel and fixed of size 100mm.

S&F aluminum anosided barrel tower bolts 150mm long, of extruded section and fixed.

S&F aluminum anosided handle 150mm long of extruded section and fixed.

M& L for 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

S&F in repair mild steel 150 mm long ordinary rat rail rod pattern helical door springs, incl roller and roller plate complete

S&F in repair 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed.

M&L preparation of new wooden surfaces and applying two coats of synthetic enamel paint over one coat of pink primer over 10 cm width or girth complete .

M& L for Preparation of new iron surface and two coat of synthetic enamel paint ovar a coat of red oxide primer

M&L 75 mm thick PCC 1:3:6 type C1 using 20mm graded stone agg in plinth protection, finished even and smooth and filling the joint after every 3 m with bitumen and sand w/o using extra cement.

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrs including dismantling of existing unserviceable water tank capacity exceeding 250 ltr and not exceeding 500 ltr complete all as specified in SSR Part I and directed

S&F Rotational moulded polyethylene water storage tanks of 1000 Litre capacity (cylinderical vertical with closed top) hoisted and fixed in position including dismantling of existing tank all as specified in SSR Part-I

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe and fixed of bore of dia of pipe 15 mm (minimum wt 210gm)

S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed

S&F in repairs plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed

S&F 15mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F 20 mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S & F Vitreous China squatting pan,'Orissa' pattern ‘long pan’, size 580x440 mm white withintgrel foot rests ‘ (excluding flushing cistern and flush pipe)fixed in repairs .

S & F Vitreous China wash basin white , flat back, size 580x450 including , waste cupling brass,waste pipe, chain and plug and porcelain stopper brackets fixed in repairs .

S&F low level PVC flushing cistern 10 ltr capacity and fixed in repairs

S&F 15 mm dia Stop valves/angle cock/two way angle valve , cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union fixed in repairs.

S&F PVC connection 15mm dia, 45 Cms long with brass ferrules on both endsfixed in repairs.

S&F PVC waste pipe with complete fitting etc 32 mm dia.

S&F stainless steel grating fixed in repairs

M&L Machine pressed precast concrete interlocking paver block any colour, shape and size conforming to IS_15658-2006 of 60mm thick, M-35 Grade with grey cement and pigment over a layer 100 mm thick PCC 1:4:8, type D-2 with using 40mm graded stone aggregate as in sub base of floors is laid over 25 mm thick sand cushioning of newly laid PCC surface all as specified and as directed by Engr-in-charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed

S&F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed.

S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed.

S&F in repairs 100 mm dia shower rose of Chromium plated brass for fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed.

S&F in repairs chromium plated wall mixture with connection for shower arragement complete all as specified and directed.

S&F in repairs water jet for ETWC chromium plated with PVC connection complete all as specified and directed.

S&F in repairs chromium plated hand shower (health faucet) 1 mtr tube with wall hook complete for ETWC complete all as specified and directed.

S&F in repairs kitchen sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste pipe and coupling including bedding in cement mortar on dwarf walls including brackets and connecting union to pipe overall size of sink 915 x460 mm and bowl size 410x330x160 mm complete all as specified and directed.

S&F in repair of glass corner set of three of size (12'X12" ,9"X9" and 6" X6" ) with railling and complete all as specified and directed.

Dismantling of cast iron /PVC/AC/SGSW pipes 100mm dia jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F PVC(SWR) 110mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed

S&F PVC (SWR) 110mm dia bends complete all as specified and directed.

S&F 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like etc over a 15 mm screed bed 1:4 complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation bed of manhole etc all as specified and directed.

Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed

S&F in repairs 20 mm dia SS fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

S&F in repairs factory made PVC cupboards frame of the size 75 mm x 40 mm with a wall thicknesss of 5 mm made out of extruded 5mm thick plain/prelam PVC sheet of density 600kg/cbm, having bottom width of 50mm and thickness of 10 mm. All four frame lengths reinforced with 15 mm x 15mm M.S.square tubes of 19 quage thickness throughout the frame and mitre cut at two corners adjointed with 2 nos of 15mm long brackets of 10 mm x 10 mm M.S. square tubes. the door frame shall be fixed to the wall using 8/100 long MS screw through the frame by using PVC fastners. A minimum of 4 nos of screws to be provided for each vertical members and minimum of 2 nos of screw to be provided horizontal members etc. complete as per direction of Engr-in-charge, manufacturer's specification and drawing.

S&F factory made PVC cupboards flush type shutter of 30 mm thick consisting of frame made out M S tubes of 19 guage thickness and size 19mm x 19 mm for stiles and rails. The inside panels shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both sides of inside panels including necessary item to fix the shutters to frame such as 100 mm stainless steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutters. all four edges of the panels to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2nos PVC foam sheet of 5mm thickness using PVC solvent cement adhesive) complete as per direction of Engr-in- charge

S&F in repairs PVC boards 19/20 mm thick any colour as in cabinets incl shelves and shutters, fixed with screws and adhesives as per direction of engr-in-charge and manufacturers instructions including piano hinges , magnet catcher, handles etc

Cleaning of roof/ walls of buildings ( area n exec 100 sqm) including complete removal plants grown with roots and treated with lime and filling the hole properly by cement mortar 1:3.

M& L for providing precast cement concrete rubber moulded chequered coloured tiles 20 to 25 mm thick even finished on top of approved design over a screed bed of 1:6 cement : sand and pattern complete all as specified and directed

Cutting holes into bricks walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1as required, depth of hold fast exceeding half brick and not exceeding one brick all as spd and directed

Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets.

M&L for 4mm thick E-Board classic (everest or equivalent) tiles for insulation and accoustic purpose 60cm x 60cm with and including powder coated galvanised iron snap grid with 32x25x1.5mm thick Tee section and 32x25x1.5mm thick algle section with all hanging/supporting arrangements as in false ceiling and making good disturbed surface complete all as specified and directed.complete all as specified and directed.

Taking down hood covers of rolling shutters of area not exceeding 6 sqm loose brackets plates or guide properly greasing helical spring,shafts, and guide, channel for proper functioning of rolling shutter of any size and refixing covers in position after repairs complete all as specified and directed.

Notes :

Goel Enterprises

SHRI BALA JI STORE

novell engineers

JAI SRI RAM ASSOCIATE

REHAN CONSTRUCTION

M/S Harshri Nath Enterprises

M/S Quality Constructions

M/S Alam Construction Co