RENOVATION OF COOK HOUSE AND DINING HALLS IN SINGLE LIVING ACCOMODATION (TSU), REPLACEMENT OF EXISTING INTERLOCKING TILES WITH HEAVY DUTY TILES IN FRONT OF CEPTAM BLDG WET CANTEEN AND OLD DTRL BLDG (NOW CEPTAM) AND SPECIAL REPAIR TO ROOF AUDITORIUM

Amount

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4, type B-1 (20mm graded crushed stone aggregate) as in sub base of floors complete all as specified and directed.

M&L for Ist quality Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and laid over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for Ist quality glazed coloured ceramic tiles 300mm X 450 mm X 7 mm thick as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Ist quality non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and laid over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18 to 20 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing over and including 20mm thick cement screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 15 to 18 mm thick as in riser of steps, skirting, dado and pillar etc laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubing down with water etc complete all as specified and directed

M&L for 15 mm thick cement plaster on brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick cement plaster in CM 1:3 as in soffits of slabs/Chajja/Sunshade finishing the plastered surface even & smooth without using extra cement complete all as specified and as directed .

M&L for Preparation of new plastered wall surfaces and applying two coats of oil bound distemper over 2mm thick wall care putty ( each coat 1mm thick) complete all as specified and directed.

M&L for complete removal of existing treatment from ceiling (internal), fins, chajja etc, brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots and applying two coats of white wash complete all as specified and directed.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame ) exc 1.50 sqm but not exc 4.00 sqm each complete all as specified and directed.

All as per ser item No 15 above but n.exc 1.50 Sqm each

M&L for granite stone slabs or tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Moulding or rounding, cutting and smooth finishing on edges of Granite tiles etc complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing shown in SSR complete all as specified and directed.

S&F Factory made solid panel PVCdoor shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown in SSR complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted wifth cut and mitred beads for securing glass, gauge etc, sizes of members of shutters as specified in SSR Part I, Sec-8, clause 24(a), complete all as specified and directed.

S&F 30mm thick flush shutters solid core construction, with block board core and both sides covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F stainless steel butt hinges 100mm medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F aluminium anodised barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt 250mm ( bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F aluminium handles, 150mm cast type anodised complete all as specified and directed.

S&F floor door stoppers 140mm of aluminium alloy body and tounge, anodised with hard drawn steel springs, fixed in floors complete all as specified and directed.

M&L for Preparation of new wood or wood based surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Factory fabricated steel windows with side hung shutters incl projecting type hinges with steel handle and steel peg stay with glazing bars complete all as specified and directed.

S&F Mild steel framed work such as grills, gratings,etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing; frame work for water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F steel ventilator with top hung shutter, including hinges, steel peg stay complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for Preparation of new iron or steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking up or down steel tubing of 15mm internal bore and connections incl cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing of 20mm internal bore and connections incl cleaning for refixing or removal to store complete all as specified and directed.

Dismantling water tanks of capacity exc 500 but n exc 1000 ltrs complete all as sepcified and directed.

S&F rotational moulded polyethylene water storage tank 1000 ltrs capacity, cylindrical vertical with closed top, triple layered, hoisted and fixed in position complete all as specified and directed.

S&F Gun-metal gate valves, with iron wheel head, screwed both ends for GI pipe 20 mm bore and fixed complete all as specified and directed.

S&F in repairs vitreous China wash basin, white flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan(pedestal patten), coloured (excluding fixing bolts flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including mild steel brackets complete all as specified and directed.

S&F 75 mm bore Cast iron floor trap, with grating including jointing to waste pipe fixed in PCC 1:2:4, type B1 complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm long etc. complete all as specified and directed.

S&F in repair fancy type chromium plated bib taps cast copper alloy with capstan head, screwed down for iron pipe and fixed 15mm dia of pipe complete all as specified and directed.

S&F 15 mm dia brass chromium plated pillar tap, with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specified and directed.

S&F in repair fancy type chromium plated angle valves cast copper alloy, screwed for iron pipe or for unions and fixed 15mm dia of pipe complete all as specified and directed.

Dismantling cast iron pipes, jointed in cement mortar of upto 100mm/75mm dia of pipe complete all as specified and as directed.

S&F 100mm bore cast iron spun pipes, soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and directed.

All as per item ser No 50 but 75 mm.

S&F CI 75 mm bore bends (any radius), diminishing pieces or tapers (layers bore measured) complete all as specified and directed.

S&F CI 100mm bore bends (any radius), diminishing pieces or tapers (layers bore measured) complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mmx330mmx160mm complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. complete all as specified and directed.

M&L brick work with sub class' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L TMT bars 10mm dia and over cut to length bent to shape required incl cranking, bending, spirally for columns hooking ends binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (nominal mix) using 20 mm graded crushed store aggregate as in slab, shelves etc.complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed.

M&L for treatment at points of contact of wood work by chemical emulsion ( in oil or kerosene based solution ) @ 0.5 litr hole by drilling 6mm dia hole at a down ward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugatee, etc) sheet in roof coverings complete all as specified and directed.

Dismantlng wrought iron or mild steel work of any description not otherwise provide for complete all as specified and directed.

M&L for mild steel work roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) including distance pices, cleats etc confirming Fe-290 grade E-165 complete all as specified and directed.

S&F Mild steel, plain black sheet 1.60mm thickness in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F MS Plates (plain or chequered), channels, Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Removing building material etc. (other than spoil) to a distance exc 1.50 KM and n.exc 5.0 KM beyond the lead including loading, unloading, stacking at destination complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

S&F 20mm bore GI pipe medium grade including all fittings laid in trenches or in floors/connection to existing pipe complete including all GI fitting etc complete all as specified and directed.

S&F 15mm bore GI pipe medium grade including all fittings laid in trenches or in floors/connection to existing pipe complete all as specified and dirtected.

S&F gun metal gate valve 15 mm dia with iron wheel screwed both ends for iron pipe complete all as specified and directed.

Supply and fix 15mm dia stop valve chromium plated with long shank and cup concealed type complete all as specified and directed.

Supply and fixing of PVC connection pipe of length 600 mm long with both side screw type complete all as specified and directed.

Demolition of stone slabs and tiles laid dry pointed of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm grade crushed store aggregate) as in subbase of floors complete all as specified and directed.

M&L for 10mm thick anti skid pavement tiles (heavy duty) of area n.exc 0.18 sqm each of approved colour & shade & antiskid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match the shade of tile laid over & including 20mm thick screed bed in CM 1:4 complete all as specified & directed

M&L for machine pressed pre-polished coloured chequered cement concrete tiles 30cm X 30cm X 25mm thick set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed or bedding layer in CM 1:6 including demolition of old tiles complete all as specified and directed.

S&F of Stainless steel (Grade 304) hollow tubes sections, channels, plates, angles etc of any size and sections min 16 gauge as approved by GE in railings, balusters,post, newel posts running rails ,middle rails etc including necessary welding, reveting, bolting, grinding, buffing, polishing and making curvature (wherever required) including necessary accessories, framework etc complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coated GI based pllain steel sheet 0.50mm of an coluor having tensile strength of 550 Mpa as in roof covering/cladding/ridges to, fixed with self tapping screws complete all as specified and directed.

Dismatling wall and ceiling boards (fiber pulp, inslation etc) or insulation boards/slabs/blankets/acoustical any thickness including cover fillets complete all as specified and directed.

M&L for false ceiling with 12 mm thick Gypsum board self designed as per manufactures instructions complete all as specified and directed.

M&L for Complete removal of existing roof treatment in upto depth of original roof slab and removing entire rubbish off the premises, and applying Water proofing treatment and testing after completion of treatment are as under:- (a) Rendering 10mm thick in CM(1:4) mixed with water proofing compound @3% by weight of cement or as per manufacturer's instruction. (b) Applying a coat of approved bituminous primer @0.25 ltr/Sqm and allow to dry. ( c) Applying one coat of hot blown bitumen grade 85/[email protected]/Sqm. (d) Supplying and laying polymeric water proofing membrane of weight not less than 3Kg/Sqm . (e) Applying a coats of solor reflective bituminious aluminium paint @0.15 kg/sqm over the memberane complete all as specified and directed by Engr in Charge. Note: WPC shall be measured and paid seperately.

Supply only integral water proofing compound.

M&L for cement concrete 1:2:4 type B0 (using 12.50mm graded crushed stone aggregate) as in roof for levelling/coping complete all as specified and directed.

M&L for preperation of old steel surface of any description over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L preperation of old ceiling surface and applying two coats of oil bound distemper complete all as specified and directed.

S&F acoustic wall panels comprising cortex tiles made of Wood Fibre 1mm width cement composites 25 mm thick and covered with Acoustically Transparent Woven Fabric on the front side, with an option of colours of size 1200X600/ 600X600mm. having excellent noise absorption of 1 NRC as per ISO:354-1985, STC of 49 meets the stringent fire ratings BS:476, weather resistant as per IS 3308 ,Thermal Insulation as per IS:3346-1980, confirming to EN 131682001 to be installed on fire resistant Engineered Wooden studs on which the panels are mechanically screwed on size 47x47mm fire and termite resistant hardwood studs spaced at 600x600mm centre to centre with infill of 50mmx1000 GSM thick absorbwool tested as per Fire Retardant IS 15061-2002 for excellent results complete all as specified and directed.

S&F Sound Dampner to cover glass windows 1218x1218 mm x 12mm made of 10 mm compressed wood cement composites 1250Kg/m3 and 2mm dampner sheet. to be installed on fire resistant Engineered Wooden studs on which the panels are mechanically screwed on size 47x47mm fire and termite resistant hardwood studs spaced at 600x600mm centre to centre with infill of 50mmx1000 GSM thick absorbwool tested as per Fire Retardant IS 15061-2002 for excellent results. All the joints needs to be properly sealed with special Acoustic sealant thus giving an STC of 45 and above complete all as specified and directed.

S&F Cement Fibre Tile 595x595x5mm with square edge density 1050kg/m3 covered with absorbtive microfiber coating on the front side and Acoustics fibre on the back side, thus making it acoustically absorbtive, water resistance, fire resistant as per IS1734 of absorption coefficient 0.89 at 160 Hz tested as per ISO 354. The tiles are anti sag and are to be installed on T24 grid system of 0.6mm thick ,Main ‘T’ length minimum 3000mm, web minimum 35mm to be placed at 600mm centre to centre and secondary cross ‘T’ of length 600mm, web minimum 27 mm, inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, Specially designed for Acoustic Vibration management and long life with a backing of 50mm thick,1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 for excellent results complete all as specified and directed.

S&F of Sound Dampner 22mm on wooden grid with infill at 1000 GSM Absorb wood filled with carpet with foam 1218x1218 mm made of 20 mm compressed wood fibre cement composites 1250Kg/m3 and 2mm dampner sheet to be installed on fire resistant Engineered Wooden studs on which the panels are mechanically screwed on size 47x47mm fire and termite resistant hardwood studs spaced at 600x600mm centre to centre with infill of 50mmx1000 GSM thick absorbwool tested as per Fire Retardant ASTMD 635-1991 and IS 15061-2002 for excellent results. All the joints needs to be properly sealed with special Acoustic sealant 4 mm thick thus giving minimum STC of 45, Color Fastners tested as per.IS 5641 Wash ( IS 11969) Light ( IS 0686) Flammability Test ( IS 5641) on foam to be glue complete all as specified and directed.

S&F Acoustic Door of 56 mm having an STC rating upto 50. The Door is fire resistant as per IS 3614 (PART-II) and will be filled with high acoustic materials of 2 layers of 8 mm Water Proof Acoustic Ply with Dampner Sheet, 2 Layers of 10mm thick Absorb Wool 300 GSM, Sound Dampner 1218mm x 1218 mm x 1218 mm made of 10 mm compressed wood cement composites 1250Kg/m3 and 2mm dampner sheet as per ISO 140 ( PartIII) - 1995. Final Finish with Teak Ply 4mm thick interior and Exterior Side. Door frame will be made of teak wood (Sudan Teak). Frame on all four sides or three sides frame and drop seal below will be provided along with the door. High load bearing hinges will be provided along including Door Accessories Door Closer, Door H-Type Pull Handle & Outdoor Liver ( Trim Lock) etc complete all as specified and directed

M&L for complete removal of existing treatment from old plastered surface and applying two coats of oil bound distemper over and including 2 mm thick wall care putty (min 1 mm thick each coat) complete all as specified and directed.

All as per item ser No 94.00 above but as in ceiling.

S&F 4.80 mm to 5.00mm thick tinted glass with glazing clips, rubber beading and aluminium frame beading for aluminium door /window area exc 0.5 sqm complete all as specified and directed.

Taking down carefully copper/Aluminium point wiring for light,Fan,Socket or power point complete including fittings and fixures such as switches, ceiling rose, pendents, regulators, sockets etc. and making good disturbed surface of wall, floor etc. complet all as specified and directed.

M&L Point wiring with multistranded copper conductor PVC Insulated and unsheathed cable in 20 mm dia medium grade PVC concealed conduit with 1.5 Sqmm FRLSH cable with all fittings /accessories and including 1.5 Sqmm PVC insulated copper earth wire connected common earth with 2 mm thick GI terminal box for Moduler fittings including accessories as moduler surface cover plate including accessories light/Fan/Exhaust Fan point complete and making good the existing disturbed surface complete all as specified and directed.

All as per item ser No 98.00 but 5 Amp socket point independent.

All as per item ser No 98.00 but 5 Amp socket on same board.

All as per item ser No 98.00 but 5 Amp socket point indipendent but below the switch board of the light point in the same verticle plane.

M&L for point wiring with PVC insulated FRLSH unsheathed copper conductor cable of size 2.5 sqmm including earth wire of size 2.5 Sqmm in 20 mm dia medium grade including concealed PVC conduit and 2 mm thick GI sunken suitable of modular fittings ,inner and outer modular top sheet top cover, for one 3/5 pin socket outlet 15 Amps independent complete all as specified and directed.

All as per item No 102.00 above but for one socket point out let 3 pin 15 Amp with 4.00 sqmm PVC copper conductor FRLSH and 4.00 sqmm PVC insulated copper conductor as earth continuity conductor

S&F modular socket 6 amp-2/3 pin combined 2 module 240 V complete all as specified and directed.

S&F Modular switch 1 way 6 Amp 1 Module 240 V complete all as specified and directed.

S&F Modular socket 1 way 16 Amp 2 Module 240 V complete all as specified and directed.

S&F Modular switch 1 way 16 Amp 1 Module 240 Vcomplete all as specified and directed.

M&L in replacement distribution board double door 8 way SPN having 200 Amps ,230Vrated Bus Bar complete all as specified and directed.

M&L in replacement distribution board double door 12 way SPN having 200 Amps , 230V rated Bus Bar complete all as specified and directed.

M&L in replacement distribution board double door 4 way TPN having 200 Amps , 415V rated Bus Bar complete all as specified and directed.

S&F in replacement MCB SP upto 40 Amps having breaking capacity 10KA complete all as specified and directed.

S&F in replacement MCB SPN 63 Amps having breaking capacity 10KA complete all as specified and directed.

S&F in replacement MCB TPN 100Amps having breaking capacity 10KA complete all as specified and directed.

S&F Ceiling Fan Regulator ,120 W of 2 module complete all as specified and directed.

S&F Ceiling Rose 3 terminal of PVC /polycarbonate complete all as specified and directed.

S&F in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth wire 4.00 mm dia by means of Copper nuts, bolts and washers. GI wire shall be laid in 20 mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a) GI wire of 4 mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel TMT bar 75mm centre to centre with 2 Nos MS handles of 12mm dia mild steel TMT bars suitable for carrying of pit cover.

S&F in replacement GI bracket made of 40 mm medium grade GI pipe bend to shape approx 0.9 mtr length incl Clamp etc complete for fixing of street light on wall/building complete all as specified and directed.

M&L submain wiring with FRLSH copper conductor cable in 25 mm dia medium grade non rigid PVC concealed conduit with 2x4 Sqmm size +1x4 Sqmm earth wire complete including taking down old unserviceable/burnt wiring complete all as specified and directed. Note:- 3 run of 4 sqmm cable and one run of PVC conduit shall be measured one unit

M&L submain wiring with FRLSH copper condutor cable in 25 mm dia medium grade non rigid PVC concealed conduit with 2x10 Sqmm size +1x10Sqmm earth wire complete including taking down old unserviceable/burnt wiring complete all as specified and directed. Note:- 3 run of 10 sqmm cable and one run of PVC conduit shall be measured one unit

M&L submain wiring with FRLSH copper conductor cable in 20 mm dia medium grade non rigid PVC concealed conduit with 4x10 Sqmm size +1x10Sqmm earth wire complete including taking down old unserviceable /burnt wiring complete all as specified and directed. Note:- 5 run of 10 sqmm cable and one run of PVC conduit shall be measured one unit

S&F desert cooler electric driven ( single phase) having nominal air flow capacity of 5000 cum per hour and water storage capacity 70 ltrs ( with wool wood pad,pump,connection pipe etc) plastic/ PVC body with accessories complete all as specified and directed

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Supply, installation and testing wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5TR complete all as specified and as directed.

M&L for circuit/submain wiring along with earth wire with the 2x4.OO sqmm+ 1X 4 sq mm earth wire of FRLSH PVC insulated multistranded copper conductor single core cable in and including conduit pipe 25 mm external dia medium grade non rigid including all accessories complete all as specified and directed. Note: 3 run of 4 Sqmm cable and one run of PVC conduit shall be measured as one unit (RM)

S&F single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps single pole and neutral with a two pin and earth plug and socket. complete all as specified and as directed.

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.00 KVA complete all as specified and as directed.

S&F in replacement of electrolyte grade copper tubing of size 1/2" suitable for any type of split type AC including synthetic rubber foam complete all as specified and directed. Note : - The quoted rate is inclusive of necessary T&P, Rope, Ladder etc with safety equipment for execution the work upto five stories building.

All as per ser item No. 130.00 here-in-before but size 1/4"

S&F socket modular type 2 in 1,6/16 Amps flush type 240 V complete all as specified and directed.

S&F for replacement of old fluroscent light to 12 W LED 6500 K LED Cob light fitting recessed mounted Crysta chip on board (COB) swivel downlight with crisp light throw and high CRI. The swivel feature allows you to direct light as per requirement. existing tube light taking out complete with all connected accessories complete all as specified and directed.

S&F telephone socket jack RJ 11 With shutter complete all as specified and directed.

S&F telephone socket jack RJ 45 With shutter complete all as specified and directed.

Taking down of ceiling fan 1200/1400 mm sweep size, metal body type, single phase, 240 volts AC keeping in safe custody, painting and refixing the same connecting and testing complete all as specified and directed.

S&F in replacement of MCB distribution board double door 08 Way SPN DB made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, SPN 08 way. 230 volts with bus bar rating 100 Amps, dust and vermin proof and IP 43 - IK 09 protection suitable for incorporation of MCB, including grouting in the wall, cutting & chasing etc complete all as specified and directed.

S&F 240V, 10KA 'C' curve SP 5 To 32 AMP miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and complete all as specified and directed.

BLANK

S&F Network cable for RJ 45 Data Outlet cat 6 including necessary electric connection complete all as specified and directed.

V.V CONSTRUCTIONS

m/s Kailash Chander

R.K ENGINEERS & CONTRACTORS

V M CONSTRUCTION