Construction of New I.T.I. (Industrial Training Institute) Building at Fatepura Dist. Dahod

Construction of New I.T.I.(Industrial Training Institute) Building at Fatepura Dist. Dahod

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Excavation for foundation upto 1.5 m depth including 2826.00 Cumt 284.79

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(D) Soft rock not requiring Blasting

2 Excavation for foundation for depth from 1.5 m to 3.0 1351.00 Cumt 568.72

m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead. (D) Soft rock not requiring Blasting

3 Filling in foundation and plinth with sand in layers of 379.90 Cumt 419.82

20 cm. Thickness including watering ramming and

consolidating etc. comp.

4 Filling available excavated Earth (Excluding Rock) in 1264.00 Cumt 137.47

trench plinth side of foundation . in layer not

excluding 20 cm in depth consolidation each

deposited layer by ramming and watering etc.

5 Filling foundation and plinth with murrum or 1204.00 Cumt 273.07

selected soil in layer of 20 cm in thickness including

ramming watering and consolidating etc. complete

6 Anti Termite System 1834.00 Sqmt 134.33

P/L of Permenent piping technology Anti Termite

treatment before flooring work by installing LLDP

(Low linear density Polyethylene) tube of 8 mm

O.D.& 6.4 mm I.D.With in Built Pressure

Compenstaion chif every 30 cm interval in the tube,

having working pressure of 2 kg/cm 2 and realese

rate of 1.9 ltr/Hour fixed by P-Clip and nails . The

LLDP pipe shall be installed at the entire periphery of

the building and at internal network of building

depth of 20 to 200 mm under floor every 2 to

mtr.c/c distance (adjustble as per building layout ) &

Ends of loop pass through a PVC Elbow of minmum

32 mm ID at junction box of wall and floor level,

entring into a steel reinforcmed grooved flexible pipe

mini.22 mm LD leading into junction box and during

injecting chemicls for termite control tretment. The

anti-termite chemical Lmidcloprid 30.5% SC Mix as

per IS 6313(part-III) shall be injected by the

pressure pump diluted with water @ 10.5 ml/5ltr of

water at the rate of 2 kg/sq,cm.@ 5 ltr /Smt .the

contractor shall submit approved line plan for piping

system and junction boxes dully approved By

Engineer -in-charge with bond of 5 Years warnty .

Item Description of Item Quantity Unit Rate In Amount

7 Providing and laying controlled cement concrete 465.00 Cumt 3861.37

M.150 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in (A) Foundations and

8 Providing and laying controlled cement concrete 910.00 Cumt 4601.56

M.250 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in (A) Foundations,

footings, and Mass concrete. footing

9 Providing and laying controlled cement concrete M- 88.00 Cumt 7886.08

250 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in (d) columns Up to Plinth

10 Providing and laying cement concrete 1:3:6 (1- 133.00 Cumt 3005.48

Cement : 3- coarse sand : 6- machine cut stone

aggregates 40 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

11 Providing and laying controlled cement concrete M- 179.80 Cumt 7846.69

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts

and struts G.FLOOR & F.FLOOR

12 Providing and laying controlled cement concrete M- 23.00 Cumt 7887.09

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts

and struts S.FLOOR

13 Providing and laying controlled cement concrete M- 689.00 Cumt 6404.41

250 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Ground & Plinth BEAMS

14 Providing and laying controlled cement concrete 308.00 Cumt 5239.88

M.150 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in (C) Plinth Slabs

15 Providing and laying controlled cement concrete 548.00 Cumt 6252.91

M.200 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in (C) Ground floor Beams,

& First floor Beams,

16 Providing and laying controlled cement concrete 3.00 Cumt 6292.30

M.200 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in (C) S floor Beams,

Item Description of Item Quantity Unit Rate In Amount

17 Providing and laying controlled cement concrete M- 41.00 Cumt 6781.14

200 and curing etc. complete including the cost of

form work and reinforcement for reinforced

concrete work in (c) Chhajja for Ground floor

&Chhajja for First floor

18 Providing and laying controlled cement concrete M- 1.00 Cumt 6821.54

200 and curing etc. complete including the cost of

form work and reinforcement for reinforced

concrete work in (c) Chhajja for second floor

19 Providing and laying controlled cement concrete M- 23.00 Cumt 6924.56

200 and curing etc. complete including the cost of

form work and reinforcement for reinforced

concrete work in (c) Lintal for Ground floor & Lintal

for First floor

20 Providing and laying controlled cement concrete M- 1.00 Cumt 6964.96

200 and curing etc. complete including the cost of

form work and reinforcement for reinforced

concrete work in (c) Lintal for Second floor

21 Providing and laying controlled cement concrete 522.00 Cumt 6674.08

M.200 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in (C) Ground floor Slab &

First floor Slab

22 Providing and laying controlled cement concrete 7.00 Cumt 6714.48

M.200 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in Second Floor slab

23 Providing and laying controlled cement concrete M- 12.00 Cumt 7206.35

200 and curing etc. complete including the cost of

form work and excluding the cost of reinforcement

etc. complete in (E) Stair case for Ground Floor to

first floor to Second Floor

24 Providing and laying controlled cement concrete M- 24.00 Cumt 10916.95

200 and curing etc. complete including the cost of

form work and excluding the cost of reinforcement

etc. complete in RCC Vertical and horizontal wall for

Item Description of Item Quantity Unit Rate In Amount

25 Providing and laying 8" thick Ironite flooring in C:C 795.00 Sqmt 1412.99

(M-200) laid in 1st layer of 188 mm thick & 2nd

layer of Ironite material 2 kg/m² of 12mm thick

mixing with ratio of 1:4 with dry cement finished

with 3 phase Trimax floater disc incl. material, labour

and as per following method incl. expansion joint at

30 mt. c/c as per instruction Method of Ironite

mixing : Mix well Ironite & cement in dry condition &

take one part by volume of the above mixed material

and two volume of grit 6mm to 2mm size & mix well

in dry condition the grit should be of hard stone

clean & without dust. Add water 80 liter to 90 liter

(Ration 0.4 to 0.45) water should be clean portable &

non Acidic. Method of before laying : Surface of the

graynplythic layer must be rough and without water

on the surface. At the time of laying : Initial setting i.e.

if ceases the thumb impression control of quantity of

water take care to see the Ironite is mixed properly

and evenly in the mix. After laying : See that it is

properly leveled after formal setting of flooring keep

the are of the flooring under water for 8 to 10 days

before use and necessary instruction by Architect.

Machine mixed and floater Dish finished Ironite (200

mm. thick concrete mixture machine and vibrator is

26 Providing and fixing 90 cm high Stainless steel 50.00 Rmt 3603.68

railing made from anticorrocive 304 grade S S pipe of

50 mm dia (16Gauge) as hand rail with S S 304 grade

Baluster of 38 mm dia (16Gauge) as a vertical

support fixed in RCC slab at 1.2m c/c including

three horizontal S S pipes of 25 mm dia (16Gauge) at

eqal distance fixed by 18.75 mm dia (16Gauge) S S

pipe with baluster including accessories as per

detailed drawing as directed etc. complete.

27 Providing IS Mark TMT FE 500D bar reinforcement 462054.00 Kg 77.37

for RCC work including bending & placing in position

complete up to All floor Level

Item Description of Item Quantity Unit Rate In Amount

28 Providing and fixing eco-friendly light weight 477.00 Sqmt 1674.15

calcium silicate false ceiling tiles having Tegular edge

& 15 mm Thick Densified edges on the Tile Periphery

for Extra Strength The Light weight calcium silicate

ceiling tiles shall have, light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity

resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal

Insulation. The Light weight calcium Silicate tile shall

be of approved texture Fine fissured/ Spintone/

Cosmos having NRC value of 0.5 & Globe having NRC

value of 0.75 NRC or equivalent of size 595 X

mm to be laid on true horizontal level suspended

inter locking metal grid of hot dipped galvanized

steel sections (galvanizing @120 grams per sqm

including both side) consisting of main ‘T’ runner

suitably spaced at joints to get required length and

size of 24 X 38mm made from 0.30 mm thick

(minimum) sheet, 1200mm centre to centre, and

cross ‘T’ of size 24 X 28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along spaced

between main 'T' at 600mm centre to centre to form

agrid of 1200x600mm and size 24x48mm made of

0.30mm thick (Minimum) sheet to be interlocked at

middle of the 1200x600mm panel to form grid of

size 600x600mm resting on periphery

walls/partitions on a perimeter wall angle pre-

coated steel of size (24x24x3000mm made of

29 0.40mm thick

Brick work (minimum)

using commonsheetburntwith

claythe help ofbricks

building rawl 223.00 Cumt 3853.23

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(B) Conventional (more than

10 ton) below plinth

30 Brick work using common burnt clay building bricks 868.00 Cumt 4141.66

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(B) Conventional (more than

10 ton) {Ground FLoor} and {First FLoor}

31 Brick work using common burnt clay building bricks 93.00 Cumt 4180.47

having crushing strength not less than 35 kg./Sq.Cm.

in super structure in Cement Mortar 1:5. (1- Cement :

5 -fine sand)(B) Conventional (more than 10 ton)

32 Half brick masonry in common brunt clay building 1355.00 Sqmt 645.73

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -

coarse sand ) in foundation and plinth (B)

Conventional (more than 10 ton) in super structure.

for ground floor. and First froor

Item Description of Item Quantity Unit Rate In Amount

33 Providing and laying Precast Regular concrete 222.00 Sqmt 883.75

hollow core wall with hollow core concrete unit of

approved make & size of 120 mm thick, 600 mm

wide and 2400 mm / 2600 mm / 2850 mm /

mm / 3300 mm in legth made from of controlled

cement concrete M35 having cube compressive

strength not less than 35 MPa jointing with high

strength & tensile adhesion non-shrink cementitious

joint compound / P.U. Foam. (Plaster not required)

34 Providing and fixing 75x25 M.S. Box grill with Rat 219.00 Sqmt 1559.44

Mesh for all ventilator including necessary nails or

fixing material etc. complete.

35 Providing 15mm thick cement plaster in Single coat 9185.00 Sqmt 209.86

on Rough (Similar) side of single or half birck walls /

concrete wall for interior plastering and finished

even in C M 1:4 (1 cement : 4 coarse sand) including

Mala troweled finish etc. comp. For Ground floor and

36 Providing 15mm thick cement plaster in Single coat 509.00 Sqmt 234.32

on Rough (Similar) side of single or half birck walls /

concrete wall for interior plastering and finished

even in C M 1:4 (1 cement : 4 coarse sand) including

Mala troweled finish etc. comp. For Second floor

37 Providing 10 mm. Thick cement plaster in Single coat 3702.00 Sqmt 192.42

for plastering on ceiling and soffits of stairs and

finished even and smooth in : (I) Cement mortar 1:4

(1 cement : 4 sand) including Mala troveled finish

etc. complete.Ground Floor And First Floor

38 Providing 10 mm. Thick cement plaster in Single coat 48.00 Sqmt 216.88

for plastering on ceiling and soffits of stairs and

finished even and smooth in : (I) Cement mortar 1:4

(1 cement : 4 sand) including Mala troveled finish

etc. complete. Second Floor

39 20 mm Thick sand faced Double coat Gutka plaster 6679.00 Sqmt 353.98

on walls with 1x1cm grooves consisting of 12 mm

Thick backing coat of c.m. 1:3 (1 cement : 3 sand) and

8 mm Thick finishing coat of c.m. 1:1 (1 cement :

sand) etc. complete. For all height and as per pattern

sample aprroved by the architect or directed

engineer in-charge

40 Providing throating or plaster drip and moulding to 592.00 Rmt 44.07

R.C.C. Chhajja.

Item Description of Item Quantity Unit Rate In Amount

41 Applying two coats of Birla or Asian acrylic lapy 13157.00 Sqmt 40.59

(putty) & two coats of primer of approved brand and

manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and

sand papered smooth.

42 Wall painting (two coats) with plastic emulsion paint 9412.00 Sqmt 84.82

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

43 Wall painting (two coats) with plastic emulsion paint 3745.00 Sqmt 90.48

of approved brand and manufacture on undecorated

ceiling surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

44 Wall Painting (Two coats) with weather proof 100 % 6657.00 Sqmt 122.14

acraylic emulsion (Apex or equivalent type) paint of

approved brand and manufacture and of required

shade on exterior wall surface to give an even shade

over and including primery coat with Alkaly

resistance primer of approved brand after

thoroughly brushing surface to remove all dust and

remains of loose powdered material etc. copm. for all

45 Providing And filling with good quality cinder(steam 89.00 Cumt 509.04

coal) as directed by engineer in charge in sunks in

layers of 15 cm thick,including watering,placing

,ramming well etc as directed, for all floor.

46 Providing and laying controlled cement concrete M- 19.90 Cumt 5627.72

200 for RCC work and curing complete including the

cost of form work but excluding the cost of

reinforced concrete work in coping on Ground Floor

and first Floor

47 Providing and laying controlled cement concrete M- 10.00 Cumt 5668.12

200 for RCC work and curing complete including the

cost of form work but excluding the cost of

reinforced concrete work in coping on Second Floor

Item Description of Item Quantity Unit Rate In Amount

48 Providing and fixing window having extruded 301.00 Sqmt 1583.95

aluminum Colouranodized section frame main outer

size 95mm x 24mm x1.17mm @ wt.of 0.738 Kg/mt

horizontal Three track membersize 92mm x

verticalmember of size 92mm x 31.75mm x 1.50mm

@ Wt. 1.06Kg/mt with sliding shutters of horizontal

member size 40mmx18mm x1.29mm @ wt.of

Kg/mt, vertical memberof size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5mm thick

transparent bronze colour tinted float glass

withpowder coated aluminum fittings and fixtures

and transparentsilicon sealant glass fixing to frame

as per details etc

49 Providing and fixing window having extruded 16.00 Sqmt 1713.70

aluminum Colouranodized section frame main outer

size 63.50 x 38.10 x 1.95mm,@ Wt 1.094 Kg / Rmt,

horizontal two track member size61.85 mm x

mm x 1.20mm @ wt.of 0.695 Kg/mt,vertical member

of size 61.85 mm x 31.75mm x 1.30 mm @wt.of

0.659 Kg/mt with sliding shutters of horizontal

membersize 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, verticalmember of size 40mm x 18mm

with 5 mm thick transparentbronze colour tinted

float glass with powder coated aluminumfittings and

fixtures and transparent silicon sealant glass fixingto

frame as per details etc complete for window.

50 Providing and fixing standared extruded of 19.00 Sqmt 2955.97

alluminium section of size 63mm x 38.10mm x

1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 3 mm thick

frosted glass as details etc complete for Ventilation

51 Providing and fixing M.S. Collapsible steel shutters 11.30 Sqmt 3273.41

with vertical channels 20 x 10 x 2 mm braced with

flat iron diagonals 20 x 5 mm size with top and

bottom rails of T_rin 40x 40 x 6 mm with 38mm dia,

steel pulleys complete with bolts, nuts, locking

arrangements, stoppers handles including applying a

priming coat of red lead paint with Fixed Ventilation,

3mm glass design of which is to be approved by the

architect or directed by engineer in charge.

Item Description of Item Quantity Unit Rate In Amount

52 Providing and fixing 35 mm thick flush double door 44.00 Sqmt 4262.20

shutter, solid core with Anodized Aluminium section

frame size 63.5mm x 38mm inserted Non teak wood

frame inside the aluminium section for durable grip

of hinges & Double shutter with required teakwood

batten having 1mm thick lamination on both side,

Durable Grip shall be providing with both side 15cm

long stainless steel handle and necessary Locking

system of Godrej, ,fixtures & fastenings etc. directed

by engineer in charge. D1

53 Providing and fixing 35 mm thick single flush door 60.00 Sqmt 4016.77

shutter, solid core with Anodized Aluminium section

frame size 63.5mm x 38mm inserted Non teak wood

frame inside the aluminium section for durable grip

of hinges & single shutter with required teakwood

batten having 1mm thick lamination on both side,

Durable Grip shall be providing with both side 15cm

long stainless steel handle and necessary Locking

system of Godrej, ,fixtures & fastenings etc. directed

by engineer in charge.

54 Providing and fixing FRP frame size 100 x 50 mm 54.00 Sqmt 2362.39

and 35 mm thick FRP depress panel single or Double

shutter having extra reinforcement on sides & edges

in Gel coat finish.The core of the both shutter &

frame is to be filed up with injected fire retradat

grade polyurethene foam done in situ along with

embeded wooden pieces for stiffening & also taking

hinges & fintures.The whole FRP frame & single or

double shutter is to be waterproof, weatherproof

,termite proof & resistance to mild acid/alkali.Rates

are to be inclusive of S.S hinges with necessary

screws & alluminum fixtures & fastenings & fartener

sleeve.Colour and Shade approved by Engineer-In-

55 Providing and fixing rolling shutters of approved 132.00 Sqmt 3554.40

make made of 80 mm wide M.S. laths inter-locked

together through their entire length and jointed

together at the ends by end locks mounted on

specially designed pipe shaft with bracket plates,

guide channels and arragements for inside and

outside locking with push-pull operation including

the cost of hood cover and spring etc. complete.(A)

Shutters having width below 3.5 M.

Item Description of Item Quantity Unit Rate In Amount

56 P & L 41x57 cm Machine polished Machine cut Blue 576.00 Sqmt 1121.80

Kota Stone slab flooring over 20 mm (average)thick

base of cement mortar 1:6 (1-cement 6-coarse sand)

or L.M 1:1.5 (1 Lime putty : 1.5 coarse sand laid over

and jointed with grey cement slurry mixed with

pigment to match the shade of slab including rubbing

and polishing etc.complete (A) 30mm thick

57 P & L 41x57 cm Machine polished Blue Kota Stone 30.00 Sqmt 1205.60

slab 30 mm thick in riser of steps,skirting dedo and

pillars laid on 10 mm thick cement mortar 1:3 (1-

cement 3-coarse sand) and jointed with grey cement

slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc.complete (30

58 Providing & Laying 60x60 cm GVT vitrified 8 mm 798.00 Sqmt 1472.91

thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring

and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete shade approved by directed engineer in-

59 Providing & Laying 60x60 cm Polished vitrified 8 711.00 Sqmt 1472.91

mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring

and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete shade approved by directed engineer in-

60 P & L 60x60 cm' GVT vitrified 8 mm thick tile risers 107.00 Sqmt 1421.07

of steps,skirting Dedo of cement mortar 1:3

(1cement : 3 coarse sand)and jointed with by

adhesive materials including colour cement slurry

including finished with flush pointing & cleaning the

surface etc. complete for including colour approved

61 P & L 24" x 24" GVT matt finish vitrified 8 mm thick 452.00 Sqmt 1472.91

tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and

jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc.

complete for antiskit

Item Description of Item Quantity Unit Rate In Amount

62 P & L antiskid ceramic tiles 30 x 30 cm size 6 mm 146.50 Sqmt 1017.30

thick in flooring treads of steps and landing laid on a

bed of 12 mm thick cement mortar 1:3(1-cement:3-

coarse sand)finishing with flush pointing in white

63 P & L glazed tiles tiles size 30 x 60 cm 6 mm thick in 470.00 Sqmt 1523.67

skirting risers of steps and dedo on 10 mm thick

cement plaster 1:3 (1-cement:3coarse sand) and

jointed with colour cement slurry

64 Providing and laying machine cut free edge machine 61.00 Sqmt 2457.33

polished granite stone 18mm thick finished treads

and risers in with 1cm projecting, nozing rounded

moulding in tread laid over 12 mm (av.) thick bases

of cement mortar 1:6 (1-cement : 6-coarse sand)

jointed with grey or colour cement slurry including

rubbing and polishing incl. making Three No.s of

grooves of size 3mm X 3mm along the length of

treads etc. complete

65 Providing and fixing pre-cast Rubber Dye / steel Dye 1355.00 Sqmt 936.71

inter locking concrete block 60mm thick with grade

of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming

to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc.

66 Providing and laying water proofing treatment with 1773.00 Sqmt 779.70

broken chine mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be

laid over cement mortar 1:3 to plain or slope and to

be tempered to bring mortar creme out upto surface

using white cement including rounding off junctions

and extending them upto 15 cm along the wall,

clearing with water and oxalic acid etc. as directed.

67 Providing and laying cement concrete flooring 1:2:4 1773.00 Sqmt 355.69

(1-cement : 2-coarse sand : 4-graded stone aggregate

20mm nominal size) laid in one layer and finished

with a floating coat of neat cement. (B) 50mm thick.

Item Description of Item Quantity Unit Rate In Amount

68 Providing Plinth Protection to Building including 400.00 Sqmt 1447.33

excavation in ordinary soil and laying cement

concrete 1:3:6 using stone aggregates of 40mm

nominal size in foundation layer 100 mm thick below

pre-cast Rubber Dye inter locking concrete block

60mm thick with grade of concrete M200 pneumatic

compressed by mechanically pressed and as per

approved design including 75mm Sand layer for

levelling and filling the joint with sand in proper line

and level etc. complete, Including Providing and

fixing pre-cast concrete kerb stone of grey cement

based concrete block 30cm length, 30cm height and

15cm thick of M250 grade concrete as per approved

design and including excavation for fixing in proper

line and level, filling the joint with C:M 1:3

(1cement:3 fine sand) etc. complete.

69 Providing and fixing mirror polished 18 mm thick 513.00 Sqmt 1923.04

Green Marble stone with full round edge and

polished of approved quality in clading on sill and

around the doors/ windows/ ventilation with 12 mm

thick cement mortor CM (1:4) and fixing with cement

slurry & adhesive including moulding of exposed

edges as directed by engineering in charge etc.

70 Providinfg and fixing Safty grills of required pattern 13159.00 Kg 113.73

for windows/ Door using necessary M.S angle/ M.S

pipe, M.S flats and other structural steel at required

spacing including cutting, welding and fabriction etc.

including one coat of primer of approved quality and

two coats of oil painting as per detail drawing etc

71 Providing erecting and fixing Single coated Syntex 20000.00 Kg 3.95

PVC. (ISI) water tank of required capacity each with

all necessary fittings and connection etc. complete on

72 Providing laying and jointing in true line and level 190.00 Rmt 195.67

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

Item Description of Item Quantity Unit Rate In Amount

73 Providing laying and jointing in true line and level 200.00 Rmt 148.12

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

74 Providing laying and jointing in true line and level 240.00 Rmt 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

75 Providing laying and jointing in true line and level 180.00 Rmt 72.65

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

76 Providing, laying and jointing in true line and level 240.00 Rmt 834.38

160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 160 mm diametre

x 210 mm length x 196 mm heigh at every 2000 mm

center to center or shall be concealed in walls as

directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost

of all materials.

Item Description of Item Quantity Unit Rate In Amount

77 Providing laying (to level or slopes) and jointing 605.00 Rmt 677.93

reinforced concrete Light duty non-pressure pipes

I.S. class NP2 of the following internal diameter with

collars and butt ends prepared for collar joints

including testing of joints complete.(D)

78 Providing, laying and jointing in true line and level 536.00 Rmt 897.79

110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm diametre

x 149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as

directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost

of all materials.

79 Providing, laying and jointing in true line and level 90.00 Rmt 292.90

75 mm dia. UPVC SWRType B pipe conforming to IS

13592-1992 with one end plain and other end

socketed with rubbering and fitting conforming to ISI

14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of

PVC clamp at every 2000 mm c/c or shall be

conceled in walss as directed including necessary

fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

80 Providing and fixing in PVC SWR cowel went 75mm 6.00 No 15.66

dia to pipes.(B) 75mm dia.

81 Providing and fixing in PVC SWR cowel went 14.00 No 28.79

110mm dia to pipes.(B) 110mm dia.

82 Providing and fixing PVC SWR Nahni trap IS 14735 34.00 No 600.23

for drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

Item Description of Item Quantity Unit Rate In Amount

83 Providing and fixing wash down water closet 18.00 No 3003.74

(European type W C pan) with integral P and S trap

including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement five sand) including providing

and fixing plastic seat cover for wash down WC with

CP brass hinges and rubber buffers back plastic seat

and including providing and fixing PVC flushing tank

with a pair of C I or MS bracket with complete fitting

such as lead valve siphon 15 mm dia brass ball valve

with polythene float CP brass handle unions and

couplings for connection with inlet out let and over

flow pipes 40 mm dia porcelain enameled flush bend

including cutting holes in walls and making good the

same connection the flush bend with cistern and

closet vitreous china.

{Hindustan, Cera, Parryware or equivalent }

84 Providing and fixing stainless steel grab 22 cm x 60 8.00 No 1492.78

cm for handicapped toilet

85 Providing and fixing brass screw down stop tap.(A) 15.00 No 205.83

86 Providing and fixing ball cock of approved. quality as 4.00 No 189.84

directed.(A) Copper Metal (ii) 50mm dia.

87 Providing and fixing washbasin with single hole for 14.00 No 1649.86

pillar tap with C.I. or M.S. brackets painted white

including Rubber plug, sutting holes and making

good the same but excluding fittings and also

including rate of C.P. brass waste for washbasin or

sink (A) 32mm dia. and M.I. fisher union for

washbasin or sink. (A) 32mm dia.; (A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

88 Providing and fixing 600mm x 450mm bevelled edge 14.00 No 859.41

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers.

89 Providing and fixing C.P. brass towel rail comlete 12.00 No 616.42

with C.P. brass brackets fixed to wooden plugs with

C.P. brass scews (B) 600mm x 20mm size.

90 Providing and fixing screw down bib taps of 35.00 No 214.81

following size.(A) Brass screw down bib tap polished

bright. (i) 20mm dia.

91 Providing and fixing pillar tap, capstan head, screw 14.00 No 360.57

down high pressure with screws, shanks and back

nuts. (i) 15mm dia.

92 Providing and fixing in position 300 mm high, 150 60.00 No 308.73

mm wide English letters made from 1.0 mm thick

stainless steel sheet as directed by Engineer in

charge with all necessary tools & plants etc. complete.

Item Description of Item Quantity Unit Rate In Amount

93 Providing and fixing Urinal of approved quality 6.00 No 1674.15

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

94 Providing and fixing chromium plated brass half trun 30.00 No 263.77

flush cock of approved quality including fixing in

pipe line etc. complete (ii) 25mm dia.

95 Providing and fixing S.W. gully trap with C.I. grating 12.00 No 1246.92

brick masonry chamber and water tight C.I. cover

with frame of 300mm x 300mm size (inside) with

standard weight (i) Square mouth traps (B) 150mm x

100mm size P or R type

96 Constructing brick masonry chamber for 20.00 No 2288.66

underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 precast RCC cover 455mm x 610mm

intenal dimensions with frame (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement

on walls and bed concrete etc. complete (i) Inside

dimensions 455mmx 610mm and 450mm deep for

single pipe line.

97 Constructing brick masonry chamber for 20.00 No 2872.44

underground C.I. Inspection C.I. Inspection chamber

and bends with briocks having croshing strength not

less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover

500mmx 700mm intenal dimensions with frame

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete (i) Inside dimensions

500mmx 700mm and 450mm deep for single pipe

98 Extra over items for every additional depth of 0.1M. 10.00 No 242.39

of part thereof beyond 450mm depth for Brick

masonry chamber.(i) for 455mm x 610mm size.

99 Extra over items for every additional depth of 0.1M. 10.00 Each 264.86

of part thereof beyond 450mm depth for Brick

masonry chamber.(i) for 500mm x 700mm size.

100 Providing cement vata (10cm x 10cm size) quarter 302.00 Each 24.28

round in cement mortar 1:1 including neat cement

finishing watering etc. Complete

Item Description of Item Quantity Unit Rate In Amount

101 Providing and fixing MS Ladder of required pattern 300.00 Kg 121.20

with MS flats(30x3mm) or round or square bars

(12mm) at required spacing & with round headed

bolts and nuts or screws or welding including primer

coat of approved quality and two coats of oil paintas

as directed by engineer in charge

102 Providing and fixing in position 150 mm high, 50.00 No 404.00

English letters made from 1.0 mm thick stainless

steel sheet as directed by Engineer in charge with all

necessary tools & plants etc. complete.

103 Providing and fixing polished 18 mm thick black 9.00 Sqmt 4107.67

granite with full round edge and double side polished

of approved quality in between urinal and fixing

with cement slurry & adhesive including moulding of

both exposed edges as directed by engineering in

charge etc. complete.

104 Constructing kitchen Platform of 18 mm thick 8.00 Sqmt 4192.51

Polished Black Granite at top and 25 mm thick Kota

stone slab one side polished at bottom with

cementing Materials / adhsives including makeing

necessary grooves in walls with Vertical sandwich

two Kotastone 25 mm support every 60 cm centre

to centre or as required including all labour material

of approved quality incl. full moulded round front

edge granite strip of one side polished and jointed

with grey cement slurry including rubbing and

polishing etc. complete for all floors

105 Providing and fixing 25 mm thick polished kota 12.00 Sqmt 725.18

stone Shalve with full round edge and double side

polished of any required and fixing with cement

slurry & adhesive including both exposed edges cut

and Smooth Finished as directed by engineering in

charge etc. complete.

106 Providing & fixing in position glass partition with 42.00 Sqmt 2739.12

standard extruded colored anodized aluminum

frame size 63mm x 38mm x 2mm thick make

vertical and horizontal grid distance as shown in

drawing with 12mm thick toughen glass directed

with glass film, fixed with transparent silicon rubber

gasket in panel with glazing clips 19 mm x

17.3mmx1.2mm in size including fixtures and

fastening with required all labour and equipment

and including rebar up to slab level in half partition

and as per detailed drawing as directed with all lead

Item Description of Item Quantity Unit Rate In Amount

107 Providing and fixing Kitchen sink with C.I. or M.S. 2.00 No 3640.04

brackets, painted white including cutting holes in

walls and making good the same but excluding

fittings. (C) Vitreous China Sink.(i) 600mm x 450mm

108 Providing and fixing kitchen platform trolley having 8.00 Sqmt 12442.19

three drawers of SS (IS 304) of required size like

thali, katleri, perforated, partition, cupsosar type in

kitchen platform having drawer front side and

backside by using 19mm thick all proof plywood of

ISI quality all side laminated etc. as directed. The size

of SS (IS 304) basket of size 4" to 18" for thali, dish,

katleri, perforated, partition, cupsosar type as

directed including necessary S.S. fittings, handles,

nobs, telescopic channels, etc. as directed

109 Providing and fixing 0.75 meter wide sand which 7.00 Sqmt 7197.26

type counter platform including supplying and fixing

granite stone of Z black or equivalant quality 18 mm

thick mirror polished on top and side posiition and

vertical strip at front with cement slurry & adhesive

including moulding of both exposed edges over

mm thick kotah stone platform fixing in top and

sides and itermediates supports fixing with cement

mortar and adhesive and finishing all material and

labour and assessories and 3 no flat back wash with

necessary fitting complete etc.

110 Providing & Fixing 114mm wide G.I. Sheets having 372.00 Sqmt 4548.03

weight not less than 490 Gm/m roll formed to create

84mm wide louver snap fixed on special shaped GI

channel. Fix louvers & channels shall finished with

powder coating of 55 micron (1) 0.55mm thick

sheet.etc. complet as per detail drawing as directed.

111 Providing and laying and fixing 50 mm thick 73.00 Sqmt 1491.03

expansion joint by hydro cell semi rigid UV

resistance with high performance laminated closed

cell polythene foam joint filler in sheet foam as

directed, etc. complete.

112 Applying and providing Expansion joint sealing 73.00 Sqmt 4772.00

System on 100 mm vide joint including cleaning of

exansion joint by mechanical means provision of

adhesive and flexible membrane with required bond

length as per menufracturer specification and 4mm

thick alluminium strip covering with one side sloted

and bolted with suitable system, inclusive of all

manpower, machinery and material as per

specification and as directed.

Item Description of Item Quantity Unit Rate In Amount

113 Providing and filling the expansion joint by Thioflex 73.00 Sqmt 515.39

600 polymer or equivalent confirm to BS 4254-1983

as per required shade and manufactured specifi-

cation by making groove of 50 mm x 12.5 mm lather

by cutting or by repairing groove and removing

mortar drop or any other foreign materials including

applying primer and filling required size (oversize of

joint PU foam etc. complete.

114 Providing and fixing 25 cm Wide & 3mm thick 58.00 Sqmt 1054.34

exterior composite panel on existing expansion joint

horizontally & vertically with all material, hardware,

acessories & fittings etc completed.

115 Extra for additional height of propping and centering 1663.00 Sqmt 407.75

where the height of propping and centering exceeds

4 .O M between supporting floor to ceiling including

temporary brick or stone pillars for supporting as

required. (i)Height more than 4.0 M.and upto 5.0 M.

116 Providing and Fixing Size: L 75mm x W 75mm x H 25.00 Nos 616.81

1200 ; 15 mm thick U shape corner Rubber Reflective

Guards with yellow reflective Patti fixing on

RCC/brick surface Including all fitting and material

charges & it shall be Chemical Resistant, Fade Proof,

Frost - Heat & Weather Proof, High Flexural Strength,

Highly Durable, Stain Resistance as per detailed

drawing etc. complete as directed by Architect or

Engineer in charge.

117 Supply and Installation of Corner Guard protection 40.00 Nos 1723.67

system fixed to brick wall/or tile/dado at the corner

from finished floor level. It should be adjustable end

cap. S.S.plate of 304 grade “100mm wide x1.54mm

thickness x 1200mm length “. Corner guard system

consist of following: PVC cover, base, top and bottom

end cap in different color etc complete.

Item Description of Item Quantity Unit Rate In Amount

118 Providing and Fixing 15 mm thick 300 mm x 300 mm 24.00 Sqmt 1209.07

Tactile Warning Tiles (Attention Tiles i.e. Tactile

Warning Surface Indicator {TWSI}) of Johnsan

Endura Tac Button Yellow Plus or equvqlent make in

flooring laid on 20 mm thick cement mortar 1:6 (1

cement : 6 coarse sand) on new surface and jointed

with cement slurry including finished with flush

pointing & cleaning the surface for all floors as per

detailed drawing etc. complete as directed by

Architect or Engineer in charge. Thse tiles shall be

Anti Skid, Chemical Resistant, Fade Proof, Frost -

Heat & Weather Proof, High Flexural Strength, Highly

Durable, Stain Resistance . All Tactile Warning Tiles

meet the specific size and dimension standards as

required by ISO/FDIS

119 Providing and Fixing a set of wall mounted 2.00 Set 2671.45

horizontal stainless steel collapsible grab bar and

vertical stainless steel fixed grab rail of grade SS

from round pipe supported with 75 mm dia 8 mm

thick SS 304 base flange on wall including anchor

fasteners, nuts, accessories as per detailed drawing

etc. complete as directed by Architect or Engineer in

120 Providing and fixing acrylic multilingual Braille 1.00 Nos 1765.08

(raised dots) DIRECTIONAL SIGNBOARDS of size

x 150mm designed as per accessibility standards

and having 3.5mm thick acrylic base plate with

Upper Case San Serif words made of white acrylic

non glare cut out letters of height 15mm raised not

less than 0.8mm above base plate and the equivalent

word written in Hindi with Devanagari non glare

acrylic letters of height 15mm raised not less than

0.8mm above base plate and having a non-glare

acrylic cut arrow pointing in the required direction.

Each signboard to be fixed as per manufacturers

specifications on the wall at the approved location

and at a height of 1200mm from FFL complete as per

design / specifications and guidelines as per the

entire satisfaction of the Engineer-in-charge

121 Providing & Fixing Braile Indicator Of Size 170 Mm X 35.00 Rmt 945.76

35mm For Handrails Of The Approved Design And

Make Have Braile Dots Raised 0.5 Mm Above Base

Plate To Be Installed At Specific Locations As Per

Direction Of Engineer In Charge

Item Description of Item Quantity Unit Rate In Amount

122 Providing and fixing of conspectus tape 50mm width 20.00 Rmt 2199.88

on of treads in staircase including cutting pasting etc.

As per harmonised guidelines complete in all respect

to the entire satisfaction of engineer in charge.

123 Providing and fixing C.I. Manhole cover 0.60 M. x 2.00 Nos 958.17

0.45M. size having weight not less than 35Kg.

124 Providing & erecting open well horizontal mono 2.00 Nos 36107.50

block pump set with cast iron body, complete for

three phase submersible motor having [H]For

H.P,3 phase open well horizontal mono block pump

set suitable for 1600 LPM to 1025 LPM @ 33 to

MTR head suitable for 65/80 mm dia delivery pipe

125 Supplying & erecting approvedmake 3 phase motor 2.00 Nos 19695.00

control cubicalpanel (Star-Delta) made from

16G.CRCA sheet duty painted with epoxy powder

painted inside and outside with hinged doors and

locking arrangement, consisting suitable size of ON-

OFF isolator (AC- 3/23duty) main fuses,single

phasing preventer cum water level, Guard(Compe

unit), Toggle switch to by pass Single phase

preventercum WLG,indicating lamps forR-Y-Bphases,

over load relay.Automatic water level controller,

Ammeter &Voltmeter each with two way selector

switch incoming wires duty socket Crimped,Panel to

be erected on angle iron frame grouted on wall as

overload relay,thermal/Electronics star delta cutoff

timer,start-stop push buttons.The isolator overload

relay &cntractors ofL&T,Siemens or Cuttler Hamer

make only.Panel to be erected on angle iron frame

ground on wall (e)S/D upto 2.5 H.P.

126 Drilling pilot borehole of size 250/300 mm at above 250.00 Rmt 853.25

site by mud flush direct rotery rig.

127 Reaming of 250/300 mm dia.Pilot borehole to size 15.00 Rmt 527.95

550 mm dia. Incliding assembling ,lowering housing

,casing strainerpipers with gravel packing and

clayball packing etc.

128 Development of cach water bearingzone coming 1.00 Job 13212.90

across the full depth of tubewell by lowering 100 mm

dia.Droplineand 32 mm dia airline for each water

bearing Zone with suitabale capacity air compressar

up to avilability of sand free discharge.

129 900 CFM /200 PSI capacity air compressar upto the 1.00 Job 27206.17

availability of sand free discharge for upto 250 mtrs

Item Description of Item Quantity Unit Rate In Amount

130 Supply of M.S. E.R.W. plain end medium duty pipe 250.00 Rmt 2440.64

confirming to IS 4270/2001 with latest amendments

Of size 250 mm dia (minmum thicknes of 7.1 mm)

131 Screen Slotting of MS ERW balnce pipe with size of 733749.00 slots 0.22

slot 6.75 cm X 6.35 cm X 3.12 mm for 250 mm dia

132 Supply of miscellenious bore material suitable to 250 1.00 Pair 1912.70

mm dia pipes as following (A) MS Bore clamps made

from M.S. plate with 3 holes on either side with nuts

& bolts of std make of size 900X100X16 mm flat

suitable for 250 mm dia pipe.

133 Supply of miscellenious bore material suitable to 250 1.00 No 1385.64

mm dia pipes as following (B) MS Bore Plug having

100mm height made from M.S. plate with 3 holes at

equal distance on circumferrence for nut-bolts type,

locking arrrangement with nuts-bolts & lock nuts of

std make complete from 5 mm thick M.S. plate

suitable for 250mm dia pipe.

134 Supply of miscellenious bore material suitable to 250 1.00 No 999.90

mm dia pipes as following (C) MS Bail Plug having

length 0.45 mtr from medium class pipe as per I.S.

suitable for 250 mm dia pipe.

135 Supply of miscellenious bore material suitable to 250 125.00 NO 86.21

mm dia pipes as following (D) Steel bent plate

suitable for ERW pipe for 250mm dia (size:200 X

136 Supply of GRAVEL OF selected size 4 mm to 6mm 40.00 Cum 2020.24

137 Electrologging of Pilot bore hole with carting. 1.00 Job 10665.60

138 Geohydrological ground water investigation 1.00 No 14220.80

including vehicle charges for three phase DTH

bore/DR tube well including water sample testing &

chemical analysis

139 Providing, supplying and commissioning ISI mark CI 1.00 No 4753.30

D/F Reflux Valves of following class and diameter

including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores

stacking etc. complete. Reflux valves PN 1 IS

with ISI mark size: 100 mm

140 Providing and laying in trenches galvanised mild 250.00 Rmt 921.68

steel tubes (Midium grade) of the following nominal

bore, and tube fitting (Earthwork in trenches to be

measured and paid for separately (H) 80mm

Item Description of Item Quantity Unit Rate In Amount

141 Providing and fixing to wall ceiling and floor 10.0 Kg. 60.00 Rmt 339.05

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)110 mm

142 Providing and fixing to wall ceiling and floor 10.0 Kg. 100.00 Rmt 696.90

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

floor.(G)160 mm

143 Providing junction for rain water juncton chamber of 4.00 Nos. 8755.69

size 0.60x0.60x0.75m with excavation of size

1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete

including brick masonary wall in CM 1:6 of 0.75m

height & 0.23m thick with 15mm thick cement

plaster inside & outside & 1.06x1.06 RCC (1:2:4)

slab of thickness 0.15m with CRS steel and

0.60mx0.45m cast iron manhole cover with frame

weight not less than 35 kg as per directed by

Engineer-in-charge

144 Providing Filter chamber of Brick work in C:M 1:6 of 4.00 Nos. 14827.81

size 2.06mx1.20m x1.20m & excavation dimension of

2.66mx 1.81x1.35m including C.C 1:2:4 bed concrete

of 0.15m thick including brick work in c.m 1:6 for

23cm thick wall including 15mm thick cement

plaster inside & outside with cement slurry & 10cm

thick RCC 1:2:4 top cover with frame of minimum

weight of 35 kg & filling filter material kapchi in

layers (25-40mm & 10-20mm) & BT metal 40mm &

sand as per directed by Engineer-in-charge.

145 Providing Recharging pit of size 2.0m Dia.& 2.0m 2.00 Nos. 8097.17

depth of water logging with excavation filling the pit

with gravel & sand in layers including making

300mm dia bore depth of 4.5mt & above concrete

with kapchi in layers (25-40mm & 10-20mm) & BT

metal 40mm & filling brick as directed by Engineer-

146 Excavation for foundation for depth from 3.0 m to 5.0 33.00 Cumt 613.67

m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(D) Soft rock not requiring Blasting

Item Description of Item Quantity Unit Rate In Amount

147 Providing and laying cement concrete 1:2:4 (1- 7.00 Cumt 3457.88

Cement : 2- Coarse sand : 4- graded stone aggregates

20 mm nominal size) and curing complete excluding

cost of formwork in (A) Foundation and Plinth

148 Constructing brick masonry chamber for 15.00 No. 7180.44

underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions, total weight of

cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm

and 450mm deep for pipe lines with three or more

149 Providing and laying (two level or slopes) and 40.00 Rmt. 803.06

jointing with stiff mixture of Cement Mortar in

proportion 1:1, Salt glazed stone ware pipes of pipes

150mm laying lime concrete 1:2:4 (1-Lime putty :2-

Fine samd : 4-Graded brick aggregates 40mm

nominal size) bedding for stoneware pipes of

following internal diameters with necessary

formwork and curing complete.

150 Construction of granular sub-base 150 mm thick by 60.00 Cum 1212.00

providing coarse graded machine crushed B.T.

material satisfying MOST specification of grading I

(B.T. stone aggregate 53 mm to 26.5 mm 35 %,

to 4.75 mm - 45 % and 2.36 mm below - 20 %

)including spreading in uniform layer with motor

grader on prepared surface, mixing by mix in place

method with rotavator at OMC and compacting with

vibratory roller to achieve the desired density etc.

151 Steel work, welded in built up sections framed work 9000.00 kg 91.08

including cutting, hoisting, fixing in position and

applying a priming coat of read lead paint & two coat

oil paint. (A)In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as

in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like..

Item Description of Item Quantity Unit Rate In Amount

152 Providing and fixing of Ridge flashing for roof panel 300.00 Sqmt 867.39

shall be made out of 0.5 mm thick pre coated GI sheet

. The Precoated sheet shall be of minimum 240 mpa

steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per

IS:277:1992 , 5-7 microns epoxy primer on both side

of the sheet and polyester top coat 15-18 micron.

The PPGI Sheet shall have plastic protective guard

film of minimum 25 microns to avoid scratches

during transportation. The ridge shall be fixed to the

steel members by pop rivet or self drilling/self

stitching fastners @ maximum 450 mm c/c along

length of capping/flashing etc complete .

153 Providing and fixing pre-cast concrete kerb stone of 644.00 Rmt 374.92

gray cement based concrete block 30cm ength,30cm

height and 15cm thick of M250 grade concret as per

approved design and including excavation for fixing

in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

154 Box cutting the road surface to proper slope and 708.00 Cum. 112.01

camber for making a base for road work including

removing the excavated stuff and depositing on the

road side slope as directed upto 50Mt.lead.

155 Filling in plinth with sand under floors including 284.00 Cum. 683.77

watering ramming, consolidating and dressing

156 Construction of granular sub-base 100 mm thick by 409.00 Cum. 1197.86

providing coarse graded machine crushed B.T.

material satisfying MOST specification of grading I

(B.T. stone aggregate 53 mm to 26.5 mm 35 %,

to 4.75 mm - 45 % and 2.36 mm below - 20 %

)including spreading in uniform layer with motor

grader on prepared surface, mixing by mix in place

method with rotavator at OMC and compacting with

vibratory roller to achieve the desired density etc.

157 Providing and laying wet mix macadam base course 149.00 Cum. 1189.78

100 mm thick using machine crushed B.T. chips as

per required gradation mixing with required

optimum quantity of water, conveying the mix to site

of work, spreading in to grade and camber with

mechanical paver and consolidation each layer with

vibratory roller including cost of material labour

plant and equipment etc. complete.

Item Description of Item Quantity Unit Rate In Amount

158 Compaction and finishing of cement concrete road 1416.00 Sqm. 63.63

by trimix M.250 process providing extra Labour

charges for the trimix vacume dewatering service

process on cement concrete road sutface by using

vacuum dewatering pump floater surface vibrator

including making groves and rough finish to surface

including leveling etc complete.

159 Earthwork in cuting in all sorts of soil and soft 11683.00 Cum 137.33

murrum including conveying and spreading the stuff,

embankment as and where directed within

200meters from the end of the cutting with all

required lead and lift. upto 500 Meters.

160 Rolling of earthwork in layers with power roller 11684.00 Cum 23.18

including filling in depressions which occur during

the process and Watering of earth work as directed.

161 Supply. installation, testing & commissioning of ISI 1.00 No. 325000.00

approved Horizontal Split-Case type electrical motor

driven main fire pump set having 97 m3/hr. @ 70 m

head. Kirloskar make, Horizontal end suction, back

pullout, top discharge centrifugal pump with gland

packed, with all standard accessories base frame,

coupling & coupling guard and foundation bolts.The

pump unit shall be a horizontal direct mounted

motor. Motor speed shall be 3000 rpm. Unit shall

comprise the following minimum requirements:

a) Pump, b) Electric motor IE 2 type, c) Foundation

bolts, d) Air release valve, e) Mating flanges with

gasket and fasteners, f) Discharge gauges, etc.

complete in all respect. Model DB 80/26. R Motor

40H.P. / 2900 rpm. with labour, with GST.

Item Description of Item Quantity Unit Rate In Amount

162 Supply. installation, testing & commissioning of ISI 1.00 No. 525000.00

approved Horizontal Split-case type diesel engine

driven stand-by fire pump set having 97 m3/hr. @

70 m head. The pump unit shall be a horizontallly

mounted, coupled with diesel engine. Unit shall

comprise the following minimum requirements:

a) Pump, b) Diesel Engine, c) Coupling, d) Air release

valve, i) Mating flanges with gasket and fasteners, k)

Discharge gauges, etc. complete in all respect.

Pump shall be coupled with suitable diesel engine

with heat exchanger cooled/water cooled (radiator

type) complete with base frame, anti-vibration

rubber pad, coupling with coupling guard and

foundation bolts, etc. engine shall have have a speed

of 1800-2000 rpm. Engine shall be complete with

flywheel, spider coupling, air cleaners, corrosion

resistor, oil sump with lube at pump, governor, fuel

filter, starting motor, battery charging alternator &

instrument panel suitable for 24 volt DC including

starting switches, lead acid batteries of 24V &

amp-harrating with termination, diesel engine

controller with supply cable from main panel to DEC,

suitable capacity of diesel oil tank (including first fill)

with all accessories, lube oil temperature gauge, lube

oil pressure, level gauge & high water temperature,

flexible exhaust connection & exhaust pipe with

silencer (insulated with asbestos rope), etc., with all

complete. with labour, with GST.

163 Supply. installation, testing & commissioning of ISI 1.00 No. 94660.00

approved Vertical In-line type electrical motor

driven jockey pump set having 10.8 m3/hr. @ 70m

head. The pump unit shall be a vertically direct

mounted motor. Unit shall comprise the following

minimum requirements:

a) Pump, b) Electric motor IE2, c) Foundation bolts,

d) Mating flanges with gasket and fasteners, e)

Discharge gauges, etc. complete in all respect, with

labour, with GST.

164 Suppy, Installing, Testing and Commissioning of 2.00 No. 13936.00

Normax make C.I. Heavy duty foot valve with flangs,

Nut bolts, Gaskets etc. with necessary complete

accessories. 150 mm

165 Suppy, Installing, Testing and Commissioning of 1.00 No. 4500.00

Normax make C.I. Heavy duty foot valve with flangs,

Nut bolts, Gaskets etc. with necessary complete

accessories. 80 mm

Item Description of Item Quantity Unit Rate In Amount

166 Supply, installation, testing & commissioning of 1.00 No. 235000.00

common control panel suitable for for main electrical

motor driven fire pump (1no.), Auto start of diesel

engine driven standby fire pump, & jockey electrical

motor (1 no.) Auto start of Main and jockey pump,

fire red powder coated Motor Control Center with

Aluminium busbar and weather proof enclosure (IP

54) motor control center (MCC). MCC enclosure shall

be facbricated from CRCA sheet, door & partition

shall be 14 SWG complete with incomer, Star

Delta/DOL starter bus bar, protective fuses,

indicating lamps with interlock facility with

bottom/top entry with foot mounting (on channel

frame) type complete with all accessories.(all

componenets of L&T & Schneider/siemens make).

With battery charger tricle/booster arrangement for

diesel battery charging.

FRLS Power & control cable for main electric pump

including earthing from motor control centre (MCC

panel) to pump & all instruments (pressure switchs)

with all complete. Power cabling & control cabling

including earthing from MCC panel to all pumps & all

instruments (pressure switches) inside pump house.

167 Providing and erecting XLPE (IS:7098)(I)88 ISI 50.00 No. 336.00

marked armoured cable multistrand Aluminium

conductor for 1.1 KV to be laid with necessary

clamps or in existing cable trench / trays from Fire

panel to the motors.

168 Supply, installation, testing & commissioning of 1.00 No 55000.00

Priming tank,HDPE type, min. 1000 litres, necessary

piping for priming the pumps of 100 mm size,

butterfly valves for isolation, NRV 100 mm to

prevent back flow, Water Filling piping min. 50 mm

size, to priming tank ,with all complete.

169 Supply, installation, testing & commissioning of 1.00 set 70000.00

Manifold( surge vessel,)for fire hydrant system, min.

300 mm diameter, made from M.S plate, hydro tested

to 15 kg./cm2. with ball valves, header with

couplings for fitting pressure switches, pressure

gauges etc.with necessary isolation valves with all

170 Supply, installation, testing & commissioning of 1.00 Job 20000.00

instrumentation for automatic operation of all pump

sets including 3 nos. pressure switches and 4 nos.

150 mm dia. dial Burdon Type Glycerine Filled

pressure gauges with SS syphon & isolation ball valve

arrangements with necessary isolation valves with

Item Description of Item Quantity Unit Rate In Amount

171 Supply, fabrication & erection of aboveground G.I. 20.00 Mtr. 3258.00

ERW piping, conforming to IS:1239, part-I, Heavy C

class up to 150 mm dia. and IS:3589, for size 200 mm

dia. & above, thickness. G.I. pipe fitting's as per IS:

1239, part-II, Heavy C class for size 150 mm dia. &

below & IS: 3589, min. 6.35 mm, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick

gasket, pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 200 mm dia.

172 Supply, fabrication & erection of aboveground G.I. 20.00 Mtr. 2431.00

ERW piping, conforming to IS:1239, part-I, Heavy C

class up to 150 mm dia. and IS:3589, for size 200 mm

dia. & above, thickness. G.I. pipe fitting's as per IS:

1239, part-II, Heavy C class for size 150 mm dia. &

below & IS: 3589, min. 6.35 mm, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick

gasket, pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 150 mm dia.

173 Supply, fabrication & erection of aboveground G.I. 10.00 Mtr. 1567.00

ERW piping, conforming to IS:1239, part-I, Heavy C

class up to 150 mm dia. and IS:3589, for size 200 mm

dia. & above, thickness. G.I. pipe fitting's as per IS:

1239, part-II, Heavy C class for size 150 mm dia. &

below & IS: 3589, min. 6.35 mm, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick

gasket, pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 100 mm dia.

Item Description of Item Quantity Unit Rate In Amount

174 Supply, fabrication & erection of aboveground G.I. 10.00 Mtr. 1131.00

ERW piping, conforming to IS:1239, part-I, Heavy C

class up to 150 mm dia. and IS:3589, for size 200 mm

dia. & above, thickness. G.I. pipe fitting's as per IS:

1239, part-II, Heavy C class for size 150 mm dia. &

below & IS: 3589, min. 6.35 mm, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick

gasket, pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 80 mm dia.

175 Supply, fabrication & erection of aboveground G.I. 10.00 Mtr. 575.00

ERW piping, conforming to IS:1239, part-I, Heavy C

class up to 150 mm dia. and IS:3589, for size 200 mm

dia. & above, thickness. G.I. pipe fitting's as per IS:

1239, part-II, Heavy C class for size 150 mm dia. &

below & IS: 3589, min. 6.35 mm, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick

gasket, pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 50 mm dia.

176 Supply, fabrication & erection of aboveground G.I. 100.00 Mtr. 365.00

ERW piping, conforming to IS:1239, part-I, Heavy C

class up to 150 mm dia. and IS:3589, for size 200 mm

dia. & above, thickness. G.I. pipe fitting's as per IS:

1239, part-II, Heavy C class for size 150 mm dia. &

below & IS: 3589, min. 6.35 mm, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick

gasket, pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 25 mm dia.

Item Description of Item Quantity Unit Rate In Amount

177 Supply, installtion, testing & commissioing of 20.00 Mtr 3065.00

Underground GI (ERW) piping conforming to

IS:1239, part-I, Medium class ('B' class) up to

mm dia. and IS:3589 heavy class ('C' class), for

mm dia. & above, min. 6.35mm thickness including

Medium class fittings, anti-corrosive tape of size

mm wide x 4 mm thick, wrapping & coating with

13KV holiday testing . Rates shall include sand

bedding of 75mm dia all around, backfilling of the

excavated including installation of heavy pipe

fitting's, flanges, etc.

10 % of all the welded joints shall be done

radiographically tested and 50% of the joints

radiographed shall be the "Field Joints".

testing for 2 hours at 150% of the system pressure,

hook-up etc., complete with all accessories as per

approved drawings, specicification and direction of

the Engineer-in-Charge, with all complete. (Road

Crossing) 150 mm dia.

178 Supply, installtion, testing & commissioing of 10.00 Mtr 1995.00

Underground GI (ERW) piping conforming to

IS:1239, part-I, Medium class ('B' class) up to

mm dia. and IS:3589 heavy class ('C' class), for

mm dia. & above, min. 6.35mm thickness including

Medium class fittings, anti-corrosive tape of size

mm wide x 4 mm thick, wrapping & coating with

13KV holiday testing . Rates shall include sand

bedding of 75mm dia all around, backfilling of the

excavated including installation of heavy pipe

fitting's, flanges, etc.

10 % of all the welded joints shall be done

radiographically tested and 50% of the joints

radiographed shall be the "Field Joints".

testing for 2 hours at 150% of the system pressure,

hook-up etc., complete with all accessories as per

approved drawings, specicification and direction of

the Engineer-in-Charge, with all complete. (Road

Crossing) 100 mm dia

179 Supply, installation, testing & commissioning of Cast 2.00 No. 18750.00

iron body double flanged gate valve conf. to IS:

14846, PN-1.6 with mating flanges, drilling as per

IS/ANSI 150# with mating flanges, galvanized nut,

bolts & washers, gasket 3 mm thick, etc., with all

complete. 150 mm dia.

Item Description of Item Quantity Unit Rate In Amount

180 Supply, installation, testing & commissioning of Cast 2.00 No. 10750.00

iron body double flanged gate valve conf. to IS:

14846, PN-1.6 with mating flanges, drilling as per

IS/ANSI 150# with mating flanges, galvanized nut,

bolts & washers, gasket 3 mm thick, etc., with all

complete. 100 mm dia.

181 Supply, installation, testing & commissioning of Cast 1.00 No. 7000.00

iron body double flanged gate valve conf. to IS:

14846, PN-1.6 with mating flanges, drilling as per

IS/ANSI 150# with mating flanges, galvanized nut,

bolts & washers, gasket 3 mm thick, etc., with all

complete. 50 mm dia.

182 Supply, Installation, Testing & Commissioning of 2.00 No. 6750.00

Cast iron body Butterfly valve according to IS:

PN-1.6, ISI mark, below Lever operated and above

150 mm dia. Gear operated complete with mating

flanges /ANSI class # 150 with bolts & nuts washers,

rubber gaskets 3 mm thick, etc., with all complete.

183 Supply, Installation, Testing & Commissioning of 2.00 No. 5500.00

Cast iron body Butterfly valve according to IS:

PN-1.6, ISI mark, below Lever operated and above

150 mm dia. Gear operated complete with mating

flanges /ANSI class # 150 with bolts & nuts washers,

rubber gaskets 3 mm thick, etc., with all complete.

184 Supply, Installation, Testing & Commissioning of 1.00 No. 4550.00

Cast iron body Butterfly valve according to IS:

PN-1.6, ISI mark, below Lever operated and above

150 mm dia. Gear operated complete with mating

flanges /ANSI class # 150 with bolts & nuts washers,

rubber gaskets 3 mm thick, etc., with all complete.

185 Supply, installation, testing & commissioning of Cast 2.00 No. 5517.00

iron body NRV conf. to IS: 5312, PN-1.6, Dual Plate

type with S.S flap, IS mark, complete with mating

Flanges/IS/ ANSI class # 150 with bolts & nuts,

washers, gaskets 3 mm thick, etc., with all complete.

186 Supply, installation, testing & commissioning of Cast 2.00 No. 3700.00

iron body NRV conf. to IS: 5312, PN-1.6, Dual Plate

type with S.S flap, IS mark, complete with mating

Flanges/IS/ ANSI class # 150 with bolts & nuts,

washers, gaskets 3 mm thick, etc., with all complete.

Item Description of Item Quantity Unit Rate In Amount

187 Supply, installation, testing & commissioning of Cast 1.00 No. 2500.00

iron body NRV conf. to IS: 5312, PN-1.6, Dual Plate

type with S.S flap, IS mark, complete with mating

Flanges/IS/ ANSI class # 150 with bolts & nuts,

washers, gaskets 3 mm thick, etc., with all complete.

188 Supply, installation, testing & commissioning of Four 1.00 No. 8000.00

way fire brigade Inlet connection with 63 mm dia.

stainless steel (SS304) instantaneous male inlets

with built in non return valve in each inlet with

mm dia. header pipe, suitable rubber cap and GI

chain including nuts, bolts, washers, gasket 3 mm

thick, etc. with all complete.As per IS 903. ISI mark.

189 Supply, installation, testing & commissioning of 12.00 No. 4345.00

Oblique pattern type stainless steel (SS 304) single

headed External Fire Hydrant Valve , ISI, with 63 mm

dia. female instantaneous outlet conf. to IS:

type - A, including mating flanges, galvanised nuts,

galvanised bolts/studs, washers & gaskets 3 mm

thick with all complete.

190 Supply, installation, testing & commissioning of 63 12.00 No. 1409.00

mm dia., ISI , stainless steel (SS 304) Universal

Branch Pipe conf. to IS:

191 Supply & installation, testing & commissioing of Fire 12.00 No. 4759.00

Fighting Hose - conf. to IS : 636, type - A, ISI, The fire

hose shall be 15 m long with 63 mm dia. stainless

steel (SS 304) couplings conf. to IS: 903, at both the

ends for connection with the hydrant valve and the

192 Supply, installation, testing & commissioning of 12.00 No. 2809.00

fabricated from 3 mm CRC sheet, hose boxe of size-

750 mm x 600 mm x 250 mm - painted with Fire

Redas per IS: 5, shade no. 536 color from outside &

white enamel from inside , front 3 mm thick

transparent glass with key, handle and brass hinges -

to accommodate 2 nos. of 15 mtr long hose and 1 no.

universal branch pipe, including supporting

arrangement with civil work.

193 Supply, Installation, testing & commissioing of 12.00 No. 5809.00

Swinging type mild steel hose reel drum with 20 mm

dia. x 30 mtr. rubber hose as per IS:

stand shall be of mild steel and the hose shall be

fitted with a SS shut-off nozzle & SS ball valve of

mm dia. including supporting arrangement with all

194 Supply & Installation, Testing & Commissioing of 25 4.00 No. 1100.00

mm dia gun metal Air Release valve with 25 mm dia.

stainless steel ball valve.

Item Description of Item Quantity Unit Rate In Amount

195 Supply, Installation, Testing & Commissioning of 1.00 No. 27500.00

Fixed Stand Post Type Water Monitor as per IS:

, monitor having 100 mm inlet connection with flow

of 1750 lpm with all complete and 100 mm dia. gate

valve, IS: 13095, PN-1.6, with mating flanges drilling

as per IS: 6392/IS: 1538/B 16.5/ASA 150#,

galvanised nuts, bolts/studs & washers, neoprene

rubber gasket 3mm thick., etc. with all complete.

196 Provide complete demonstration of whole fire 1.00 Job 85000.00

system for three years and obtaining fire NOC from

SMC/ Nagar palika for three years as per Govt. rules

& Regulations. Fees for SMC/ Nagar palika for Fire

NOC will be paid by department and other services

included in this items except Annual maintenance

197 Design , Supply and installation of Safety signage 12.00 sq.m 2992.00

made of Zinc Sulphilde based glow in dark , Rigid

sheet with High Luminous property enclosed in a

transperent weather proof UV stabilized plastic

pasted on 3 mm thick clear acrylic sheet such as

EXITS, EMERGENCY EXIT, DO NOT USE LIFT DURING

FIRE, FLOOR MARKINGS, FIRE LIFT, STAIRCASE

EXIT, FIRE ALARM CALL POINT, FIRE HOSE REEL,

FIRE HYDRANT POINT etc.

198 Supply, installation, testing & commissioning of 2.00 No. 35000.00

Basket Type Strainer complete with mating

Flanges/IS/ ANSI class # 150 with bolts & nuts,

washers, gaskets 3 mm thick, etc., with all complete.

199 Supply, installation, testing & commissioning of 1.00 No. 13475.00

Basket Type Strainer complete with mating

Flanges/IS/ ANSI class # 150 with bolts & nuts,

washers, gaskets 3 mm thick, etc., with all complete.

200 Supply, Installtion, Testing & Commissioing of 30.00 No. 600.00

Standard Response Sprinkler, Pendent Brass

Sprinkler, Quartzoid Bulb type with crome finish,

nickel crome platde, K factor K-80, Temp.- 680C,

1/2" end connection including resessed escutcheon.

201 Supplying of 25 mm dia UL Listed SS braided 30.00 No. 750.00

Sprinkler Flexible Hose of having 15mm end

connection outlet with supporting arrangement from

false ceiling frame and having max. test pressure of

60 bar and max. working pressure of 12 bar at

deg.c. maximum temperature. (UL Listed)

Item Description of Item Quantity Unit Rate In Amount

202 Supply, Installation, Testing & Commissioing of UL 1.00 No. 48000.00

Listed Ductile Iron Wet Alarm Control valve,

internally and externally painted, pre-trimmed with

bi-pass connection, test and drain connection, tested

to 1.5 times the working pressure, with pressure

gauge, water motor gong, including matching flanges,

galvanised bolts/studs, nuts, washers & gaskets, with

all complete.100 mm dia.

203 Supply, Installation, Testing & Commissioning of UL 1.00 No. 5500.00

Listed Water Flow Switch, with NO & NC Contacts

with all complete. 100 mm dia.

204 Supply, Installation, Testing, & Commissioning of 8.00 No. 1950.00

Stainless Steel Ball Valve for drain, with all complete.

205 Supply, Installation and commissioning of ABC type 12.00 No. 2140.00

fire extinguisher, capacity 5 kg. as per IS 14609 /

15683. With necessary fittings.

206 Supply, Installation and commissioning of CO2 type 12.00 No 6150.00

fire extinguisher, capacity 4.5 kg. as per IS

15222/15683. With necessary fittings.

207 Supply, Installation, and commissioning of Fire 1.00 No. 225000.00

Alarm panel , Addressible type, 8 loops, with

complete accessories, Make Honeywell.

208 Supply, Installation, and commissioning of optical 12.00 No. 2300.00

smoke detectors with complete accessories, Make

209 Supply, Installation, and commissioning of Intelligent 12.00 No. 5025.00

Wall Mounted Sounder, Red with Pure White skirt

with complete accessories, Make Honeywell.

210 Supply, Installation, and commissioning of Red Add 12.00 No 4030.00

Call Point, Flush Mounting, Glass with base with

complete accessories, Make Honeywell.

211 Armour Cable for Fire Alarm system, two core, 1.5 500.00 Mtr 120.00

mm2, FRLS type,

212 Supplying FIRE bucket round bottom of 9 litres 8.00 No. 1480.00

capacity made out of 24 gauge G.I Sheet with extra

handle at bottom duly painted white inside and Red

out side with FIRE mark. Filled with dry-sand and

kept on existing stand provided or hung on wall hook.

213 Supplying and erecting floor mounting Stand for 2.00 No. 4000.00

keeping four nos. of FIRE buckets comprising

mm in length, 900 mm height frame made out of

30mm x 30 mm x 4 mm angle iron with cross suports

legs, welded with 4 hooks and duly painted with one

coat of red lead and two coats of approved enamelled

Item Description of Item Quantity Unit Rate In Amount

214 Providing and laying controlled cement concrete M- 300.80 Cumt 6095.35

250 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Retaning wall

215 Providing and filter media 600mm thick as directed 192.00 Sqmt 1268.86

at the back of Protection Wall as per detailed

216 Constructing providing and fabricating cattle guard 9.00 Sqmt 5125.75

using channel section frame of size ISMC series

mm x 50 mm (Weight 9.20 kg/Rmt) and ISMC

section 100 mm x 75mm (weight 11.50 kg/Rmt)

intermediate support for welding G.I.pipe at 12 Cm

C/C of size 50 mm in a frame made of Channel

section size 100 mm x 50 mm all round including

fixing the unit on prepared chamber of masonary

wall using MS hold fast embeded in masonary wall

top as directed by Engineer in charge and as per

drawing and necessary required arrangement etc

217 Providing and fixing decorative entrance gate made 1500.00 Kg 176.75

out of cast iron and various mild steel tabular section

combination , the Ornamental entrance gate should

be fixed at compound wall including pattern and die

making , cutting , welding , grinding, fabrication

fixing in position at compound wall with necessary

pedestal, bearing block and other locking

arrangement. The entrance gate should be painted

with two coats of priming coat of paint, and two coat

of oil paint etc complete. As per detail design and

instruction of architect.

218 Providing and fixing concertina coil fencing with 320.00 Rmt 834.26

punched tape concertina coil 600 mm dia 10 mt

openable length having 50 no rounds per 6 mt

length, upto 3mt height of wall with existing angle

iron (50mm x50mm x5mm )requird shaped As per

Directed Engeenier in charge. placed 2.4mt or 3.00mt

apart and with 4 horizontal R.B.T. reinforced barbed

wire(3 mm) , stud tied with G.I. staples and G.I. clips

to retain horizontal, including necessary bolts or

G.I.barbed wire tied to angle iron, all complete as per

direction of Engineer-in-charge, with reinforced

barbed tape (R.B.T.)/Spring core (2.5 mm thick) and

weight 43.478 gm/meter at compound wall for ESR

M4/ intakewell.

Item Description of Item Quantity Unit Rate In Amount

219 Point wiring for Light/ Bell with 2-1.5 sq.mm & 367.00 Pt. 485.81

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch/

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/ Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose/ H.D.Connector

as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete, Cat-III [Accessories:- Havells (Crabtree),

MK, L&T, Legrand, Achor (Roma); Wire:- Finolex,

Havells, RR Cable, Polycab, KEI; Pipe:- Precision,

Nihir, Anchor, Polycab, Vraj]

220 Point wiring for FAN with 2-1.5 sq.mm & earth wire 197.00 Pt. 674.68

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC/ Metallic/ Wooden box, single

mounting base frame covered with textured/

metallic/ white front plate modules erected on / in

wall/ ceiling as per pipe erected with necessary

ceiling rose/ H.D. Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete, Cat-III

[Accessories:- Havells (Crabtree), MK, L&T, Legrand,

Achor (Roma); Wire:- Finolex, Havells, RR Cable,

Polycab, KEI; Pipe:- Precision, Nihir, Anchor, Polycab,

Item Description of Item Quantity Unit Rate In Amount

221 Point wiring for Individual Plug with & earth wire of 10.00 Pt. 745.38

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug

erected on PVC/ Metallic/ Wooden box covered with

appropriate front plate modules erected on/ in wall /

ceiling as per pipe erected with following type of

accessories. [II] For 16A Plug and 16A switch with 2-

2.5 sq.mm Cu. Wire from mcb db board., (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ ceiling complete, Cat-III

[Accessories:- Havells (Crabtree), MK, L&T, Legrand,

Achor (Roma); Wire:- Finolex, Havells, RR Cable,

Polycab, KEI; Pipe:- Precision, Nihir, Anchor, Polycab,

222 [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. 25.00 Pt. 510.05

Wire from nearby switchboard/ mcb db board (f)

with medium class Rigid PVC pipe and accessories

erected concealed in wall/ ceiling complete, Cat-III

[Accessories:- Havells (Crabtree), MK, L&T, Legrand,

Achor (Roma); Wire:- Finolex, Havells, RR Cable,

Polycab, KEI; Pipe:- Precision, Nihir, Anchor, Polycab,

223 Point wiring for on board Looped Plug with 6A 105.00 Pt. 257.55

Modular type switch & 5 pin socket erected on PVC/

Metallic/Wooden box, single mounting base frame

covered with textured/ metallic/ white front plate

modules erected on/ in wall / ceiling with following

type accessories Cat-III [Accessories:- Havells

(Crabtree), MK, L&T, Legrand, Achor (Roma)]

224 Providing following type of Modular Type 11.00 Nos. 160.59

Accessories mounted with PVC / metallic/ Wooden

box, single mounting base frame covered with

textured / metallic/ white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (3) Two

Pin/RJ-11 Telephone Socket [A] For One Gang, Cat-III

[Accessories:- Havells (Crabtree), MK, L&T, Legrand,

225 Providing following type of Modular Type 125.00 Nos. 25.25

Accessories mounted with PVC / metallic/ Wooden

box, single mounting base frame covered with

textured / metallic/ white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (7) Blank

Plate Single , Cat-III [Accessories:- Havells

(Crabtree), MK, L&T, Legrand, Achor (Roma)]

Item Description of Item Quantity Unit Rate In Amount

226 Providing following type of Modular Type 68.00 Nos. 160.59

Accessories mounted with PVC / metallic/ Wooden

box, single mounting base frame covered with

textured / metallic/ white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (8) Modem

Jack for Computer Open RJ-45, Cat-III [Accessories:-

Havells (Crabtree), MK, L&T, Legrand, Achor (Roma)]

227 Providing following type of Modular Type 5.00 Nos. 310.07

Accessories mounted with PVC / metallic/ Wooden

box, single mounting base frame covered with

textured / metallic/ white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (13)

6A/10A/16A/20A/25A/32A Single pole Modular

MCB Switch, Cat-III [Accessories:- Havells

(Crabtree), MK, L&T, Legrand, Achor (Roma)]

228 Providing following type of Modular Type 5.00 Nos. 199.98

Accessories mounted with PVC / metallic/ Wooden

box, single mounting base frame covered with

textured / metallic/ white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (10)

6/16Amp. Universal socket, Cat-III [Accessories:-

Havells (Crabtree), MK, L&T, Legrand, Achor (Roma)]

229 Providing and erecting ISI mark Medium class RIGID 1510.00 Mtr. 33.33

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved

manner as directed, (b) 25 mm [Pipe:- Precision,

Nihir, Anchor, Polycab, Vraj]

230 Mains with 1.1 KV grade FRLS PVC insulated ISI 4430.00 Mtr. 82.82

marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for

earth continuity of following size(a)with medium

class Rigid PVC pipe and accessories (b)2 wire 2.5 sq.

mm [Wire:- Finolex, Havells, RR Cable, Polycab, KEI;

Pipe:- Precision, Nihir, Anchor, Polycab, Vraj]

Item Description of Item Quantity Unit Rate In Amount

231 Mains with 1.1 KV grade FRLS PVC insulated ISI 620.00 Mtr. 260.58

marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size(a) with medium class Rigid PVC pipe

and accessories (h) 4 wire 6 sq. mmm [Wire:-

Finolex, Havells, RR Cable, Polycab, KEI; Pipe:-

Precision, Nihir, Anchor, Polycab, Vraj]

232 Mains with 1.1 KV grade FRLS PVC insulated ISI 2800.00 Mtr. 112.11

marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size(a) with medium class Rigid PVC pipe

and accessories (a) 2 wire 4 sq. mm [Wire:- Finolex,

Havells, RR Cable, Polycab, KEI; Pipe:- Precision,

Nihir, Anchor, Polycab, Vraj]

233 Mains with 1.1 KV grade FRLS PVC insulated ISI 2800.00 Mtr. 180.79

marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size(a) with medium class Rigid PVC pipe

and accessories (g) 4 wire 4 sq. mm [Wire:- Finolex,

Havells, RR Cable, Polycab, KEI; Pipe:- Precision,

Nihir, Anchor, Polycab, Vraj]

234 Supplying and erecting Flexible PVC insulated 177.00 Mtr. 46.46

multistrand multicore 1.1 kv grade ISI marked

copper wires of following size to be erected as

directed. (e) 1.50 Sq.mm 3 core round PVC sheathed

[Wire:- Finolex, Havells, RR Cable, Polycab, KEI]

235 Supplying & erecting Delton or approved make 720.00 Mtr. 20.20

Telephone Cable electrolytic copper conductor PE

insulation twisted in two pairs, & wrapped with

FRLS PVC tape & sheathed with FRLS PVC or HFFR

outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With

necessary connections. [A] Conductor Size 0.5 mm,

(a) Unarmoured, 2) Two Pairs [Wire:- Finolex,

Havells, RR Cable, Polycab, KEI]

Item Description of Item Quantity Unit Rate In Amount

236 Supplying & erecting approved make LAN cable of 2030.00 Mtr. 47.47

following size in existing pipe as per direction, [C]

CAT - 6 [Cable :- D-link, Havells, RR Cable, KEI,

237 Decorative call bell Ting-tong box type 250 volts 2.00 Nos. 71.71

complete erected.

238 Providing & erecting Switch board for Computer or 68.00 Nos. 1133.22

electric apparatus consisting of following modular

type accessories mounted with PVC/ Metallic

concealed/ open box with single mounting base

frame covered with textured/ metallic / white front

plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories, Cat-III [Accessories:-

Havells (Crabtree), MK, L&T, Legrand, Achor (Roma)]

239 Supplying & erecting approved make Four Pole 415V 1.00 Nos. 12241.20

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS

for (D)200A, Cat-III [Make: -L&T, Havells, ABB,

Siemens, Schneider, Hager]

240 Approved make Four pole moulded case circuit 1.00 Nos. 16221.61

breaker having breaking capacity ICU of 35 KA. at

415 V. having Normal current rating up to 200A with

variable Thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal

connections & complete erected in existing

G.M.S.housing, ICS=100% of ICU only,Cat III [Make:-

L&T, Havells, ABB, Siemens, Schneider, Hager]

241 Approved make Four pole moulded case circuit 1.00 Nos. 17843.77

breaker having breaking capacity ICU of 35 KA. at

415 V. having Normal current rating up to 200A with

variable Thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal

connections & complete erected in existing

G.M.S.housing, ICS=100% of ICU only,Cat III [Added

Rs. 10% extra for housing/Encloser of MCCB] [Make:-

L&T, Havells, ABB, Siemens, Schneider, Hager]

Item Description of Item Quantity Unit Rate In Amount

242 Approved make Four pole moulded case circuit 4.00 Nos. 7755.79

breaker having breaking capacity ICU of 35 KA. at

415 V. having normal current rating up to 125A.

with Fixed thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal

connections & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III [Make:- L&T,

Havells, ABB, Siemens, Schneider, Hager]

243 Approved make Four pole moulded case circuit 23.00 Nos. 6173.12

breaker having breaking capacity ICU of 25 KA. at

415 V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release suitable

to work on A.C. supply 50 c/s. with all internal

connections & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only, Cat III [Make:- L&T,

Havells, ABB, Siemens, Schneider, Hager]

244 Approved make Earth fault Relay suitable to mount 2.00 Nos. 4983.34

with inter connection to moulded case circuit

breaker having CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all internal

connections & complete erected in existing

M.S.housing, (2) 125 A -200 A , CT Ratio 1/200

[Make:- L&T, Havells, ABB, Siemens, Schneider,

245 Approved make Earth fault Relay suitable to mount 11.00 Nos. 4687.41

with inter connection to moulded case circuit

breaker having CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all internal

connections & complete erected in existing

M.S.housing, (1) 15 A -100 A , CT Ratio 1/100 [Make:-

L&T, Havells, ABB, Siemens, Schneider, Hager]

246 Supplying and erecting triple pole & neutral 440V / 6.20 Rn. 1961.42

500V panel mounting Copper Busbars with four Mtr.

equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour

insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus

bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

Item Description of Item Quantity Unit Rate In Amount

247 Supplying and erecting triple pole & neutral 440V / 3.20 Rn. 3202.71

500V panel mounting Copper Busbars with four Mtr.

equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour

insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus

bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. (B) Suitable for 200 Amp. capacity

248 providing and erecting Miniature circuit breaker 120.00 Nos. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat-III [Make:- L&T,

Havells, ABB, Siemens, Schneider, Hager]

249 providing and erecting Miniature circuit breaker 45.00 Nos. 270.68

single pole 0.5A to 2A system and having breaking

capacity 10 KA to be erected in existing box.

confirming to IS 8828/ 1996 with ISI Mark, Cat-III

[Make:- L&T, Havells, ABB, Siemens, Schneider,

250 Providing & erecting 240 V MCB double pole switch 56.00 Nos. 299.97

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity, (A) 6 to 32 Amp., Cat-

III [Make:- L&T, Havells, ABB, Siemens, Schneider,

251 Providing & erecting 415 V MCB Four Pole for Motor 57.00 Nos. 595.90

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box

having capacity, (a) 6 to 32 Amp. Cat-III [Make:- L&T,

Havells, ABB, Siemens, Schneider, Hager]

252 Providing & erecting 415 V MCB Four Pole for Motor 27.00 Nos. 668.62

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box

having capacity, (b)40 Amp., Cat-III [Make:- L&T,

Havells, ABB, Siemens, Schneider, Hager]

Item Description of Item Quantity Unit Rate In Amount

253 Providing and erecting Sheet Steel powder coated 10.00 Nos. 2339.16

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be

used) suitable for,(B) three phase incoming and

single phase horizontal type outgoing Per phase

isolation type (PPI), (b) sheet steel double door)

Three phase 6 way SS Double door for single phase

outgoing, (b) sheet steel double door, (i)4 way

[Make:- L&T, Havells, ABB, Siemens, Schneider,

254 Sheets steel powder coated enclosure suitable for 53.00 Nos. 176.75

incorporating One/Two nos. MCB. [Make:- L&T,

Havells, ABB, Siemens, Schneider, Hager]

255 Approved make ELCBs / RCCBs conforming to IS: 83.00 Nos. 2235.13

12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 6 KA and suitable for

operation on single phase 240 V. having

characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component. for following Max. rating erected as

directed (ii) 40Amps. DP, Cat-III [Make:- L&T,

Havells, ABB, Siemens, Schneider, Hager]

256 Approved make ELCBs / RCCBs conforming to IS: 53.00 Nos. 2637.11

12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 6 KA and suitable for

operation on 3 phase and neutral 415V. having

characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component for following Max. rating erected as

directed. (ii) 40Amps. FP , Cat-III [Make:- L&T,

Havells, ABB, Siemens, Schneider, Hager]

257 Providing & erecting insulated socket 3P+N+E with 53.00 Nos. 2190.69

Plug 32A rating which is comprised of Four pole MCB

slot and insulated socket IP40 [1-6-17]

Item Description of Item Quantity Unit Rate In Amount

258 Supplying & erecting earth pit of minimum bore 13.00 Nos. 4591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge

dissipation suitable for following type of applications

with chamber and heavy duty cover. (A)(approved

make OEM has to submit test certificate including

value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:-

0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for

long time Necessary test report must be submitted

by Agency. (a) For Electrical Installation up to 440V

in normal soil, Length of pipe - 1 Mtr, Back filling

compound - 1 Nos Bag of 15 Kg

259 Providing and erecting Annealed bare Copper wire 8 31.00 Kg. 794.87

Item Description of Item Quantity Unit Rate In Amount

260 Providing & erecting weather proof, dust & vermin 15.00 Sq. 10468.65

proof, floor mounted front operated indoor type mtr.

cubical panel board necessary IP-42 protection &

above as per requirement made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with necessary

supporting angles, flats including cutting, bending,

drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch

gears, BUSBARS, with suitable size of inter

connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, Bakelite control fuses

for measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos.

of hinged doors, handles with locking arrangement

and rubber gasket, heavy duty end terminal

connection complete. The Panel shall be painted with

epoxy powder coating. (The rates excludes the cost

of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams)

The panel shall be supplied with following approved

manufacturers with following size. (B) locally

fabricated panel board, (i) with 350 mm depth

261 Providing & erecting High Voltage Danger Notice 11.00 Nos. 35.35

Board sticker of standard size

262 Providing , erecting , fabricating the M.S. structure as 80.00 kg. 77.77

per requirement on site incorporating proper size of

M.S. angles, flats, bars, channels, sections complete

with cutting, welding, grinding & finishing duly

painted with one coat of red oxide with erection on

site as per direction of engineer in charge with

necessary grouting, cementing, plastering & finishing

263 Providing and erecting XLPE(IS:7098)(I)-88 ISI 150.00 Mtr. 731.24

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables

(F) 3 1/2 core 150 Sq. mm (70 Sq. mm 1/2 core)

[Make:- Havells, KEI, Finolex, RR Cable, Polycab]

264 Providing and erecting XLPE(IS:7098)(I)-88 ISI 180.00 Mtr. 540.35

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables

(E) 3 1/2 core 120 Sq. mm (70 Sq. mm 1/2 core)

[Make:- Havells, KEI, Finolex, RR Cable, Polycab]

Item Description of Item Quantity Unit Rate In Amount

265 Providing and erecting XLPE(IS:7098)(I)-88 ISI 90.00 Mtr. 378.75

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables

(C) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

[Make:- Havells, KEI, Finolex, RR Cable, Polycab]

266 Providing and erecting XLPE(IS:7098)(I)-88 ISI 270.00 Mtr. 220.18

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables

(A-1) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

[Make:- Havells, KEI, Finolex, RR Cable, Polycab]

267 Providing and erecting XLPE (IS:7098)(I)-88 ISI 985.00 Mtr. 126.25

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (B) 4 core 6 Sq. mm [Make:-

Havells, KEI, Finolex, RR Cable, Polycab]

268 Providing and erecting XLPE (IS:7098)(I)-88 ISI 90.00 Mtr. 140.39

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (c) 4 core 10 Sq. mm [Make:-

Havells, KEI, Finolex, RR Cable, Polycab]

269 Providing & laying approved make Double walled 810.00 Mtr. 62.62

corrugated pipes (DWC) of polyethylene (conforming

to IS 14930 II )with necessary connecting

accessories of same material at required depth for

laying of cable. below ground / road surface for

enclosing cable, (A)50 mm inner dia

270 Providing & laying. R.C.C. Hume pipe for cable to be 300.00 Mtr. 295.93

laid 90 cms. below ground across the road crossing

or on floor with necessary material in an approved

manner and making the ground as per original. (D)

271 Providing and, fixing heavy duty flange type brass 2.00 Nos. 190.89

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables. (F) 3 &

1/2 core 150 Sq. mm

272 Providing and, fixing heavy duty flange type brass 2.00 Nos. 140.39

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables. (E)

& 1/2 core 120 Sq. mm

273 Providing and, fixing heavy duty flange type brass 6.00 Nos. 103.02

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables. (C) 3 &

1/2 core 70 Sq. mm

Item Description of Item Quantity Unit Rate In Amount

274 Providing and, fixing heavy duty flange type brass 14.00 Nos. 75.75

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables. (B)

& 1/2 core 35 Sq. mm

275 Solderless crimping type Aluminium lugs conforming 6.00 Nos. 61.61

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (H) 150 Sq.mm.

276 Solderless crimping type Aluminium lugs conforming 12.00 Nos. 45.45

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (G) 120 Sq.mm.

277 Solderless crimping type Aluminium lugs conforming 16.00 Nos. 25.25

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (E) 70 Sq.mm.

278 Solderless crimping type Aluminium lugs conforming 44.00 Nos. 20.20

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (D) 35 Sq.mm.

279 Solderless crimping type Aluminium lugs conforming 14.00 Nos. 15.15

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (C) 16/25 Sq.mm.

280 Solderless crimping type Aluminium lugs conforming 280.00 Nos. 6.06

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

Item Description of Item Quantity Unit Rate In Amount

281 Supply, Installation, Testing and Commissioning of 197.00 Nos. 2629.03

suitable sweep, BEE 5 Star rated, Ceiling fan with

Brush Less Direct Current (BLDC) permanent ferrite

magnet Motor, class of insulation: B, Rust free 3 nos.

Aluminium blades, 2 nos. canopies, shackle kit with

earthing provision, copper winding, Power factor

not < 0.9, Service Value (CMM/W) minimum 6.85, Air

delivery minimum 215 CMM, 350 RPM, 230V

(tolerance as per IS : 374-2019), THD < 10%,

compitible with electronic regulator unit for Speed

Control and all remaining accessories including

safety pin, nut bolts, washers, temperature rise =

degree C (Max.), suitable for 140 to 285 Voltage and

rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing

etc. Complete as required.[ Make shall be approved

by Engineer in Charge] (A) 1200 mm Sweep (48")

[Make:- Crompton, Bajaj, Usha, Havells, Orient]

282 Supplying and erecting 19 / 20 mm. nominal bore 70.00 Mtr. 108.07

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leckage and earthing.

283 Supplying & erecting fan hook box of 10 mm M.S. 197.00 Nos. 108.07

round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge

M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

284 Supplying & erecting approved make low noise 18.00 Nos. 1703.87

decorative exhaust fan having square frame ABS

body with inbuilt lowers & square frame. 200mm

with 1350RPM Cat.II [Make:- Crompton, Bajaj, Usha,

Havells, Orient]

285 Supplying & erecting single phase approved make 4.00 Nos. 2054.34

industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium

duty having following dia size and maximum speed

in RPM, [A] 305 mm dia 900 RPM, Cat-III [Make:-

Crompton, Bajaj, Usha, Havells, Orient]

286 Providing recess in wall or window frame suitable 18.00 Nos. 189.88

for erection of Exhaust fan complete with plastering

and color washing to match the colour of the wall or

window complete with expanded metal in order to

render the fitting in accessible and the room water-

Item Description of Item Quantity Unit Rate In Amount

287 Supplying and erecting approved make Octagonal 23.00 Nos. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box

consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable

foundation (Included) as per details given by

manufacturer considering site requirement. (C)

Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm base plate,

4-M16 Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 46 kg, [Make:- Valmont,

Bajaj, Transrail, Jindal, Utkarsh, Ambika]

288 Supplying and erecting Street light pole bracket 13.00 Nos. 491.87

comprising main B Class GI pipe of 4.2 cm/ require

outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms. length and suitable for

76.5mm/ 80mm /require size of pole top having nuts

and bolts for fixing the brackets and having spread of

0.5 mtr. Length with 110 deg .with vertical plane and

suitable welded stiffener reducer and nipple with

check nut complete painted with one coat.of Red

oxide/ PU base primer and two coats of Aluminium/

PU paint. paint with following nos of arms. [A] Single

Arm bracket 0.5 Mtr

289 Supplying and erecting Street light pole bracket 10.00 Nos. 622.16

comprising main B Class GI pipe of 4.2 cm/ require

outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms. length and suitable for

76.5mm/ 80mm /require size of pole top having nuts

and bolts for fixing the brackets and having spread of

0.5 mtr. Length with 110 deg .with vertical plane and

suitable welded stiffener reducer and nipple with

check nut complete painted with one coat.of Red

oxide/ PU base primer and two coats of Aluminium/

PU paint. paint with following nos of arms. [B]

Double Arm Bracket 0.5 Mtr

290 Pipe type earthing having 150 cms.long and 2.5 cms. 23.00 Nos. 368.65

dia. galvanised iron pipe with coupling and buch

buried in specially prepared earth pit complete with

necessary 8 SWG earth wire.

291 For using salt and charcoal / coke as required for 23.00 Nos. 171.70

pipe type earthing.

Item Description of Item Quantity Unit Rate In Amount

292 Making trench in soft soil of suitable width of 90 cms 860.00 Mtr. 55.55

deep for laying cable or locating the fault all over the

run and backfilling the same and making the surface

as normal ground.

293 Supplying & erecting approved make IP 55 grade 1.00 Nos. 13350.18

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with hinged

doors and locking arrangement consisting of suitable

size of 4 Pole MCB and 4 pole contactor (cat-III)with

analog time switch, auto manual switch of same

make and suitable input and output Bakelite

terminals and with door earthing approved by

Engineer in charge. (B) 40 Amp

294 Supplying microphones stands with sturdy 3.00 Nos. 445.41

mechanism, treble free movement & positioning of

microphones, free from rust with superior quality of

chrome plating with following size. [[Approved by

Competent Authority i.e. not Below the rank of

Executive Engineer ] (c)Fixed height 91 cms. &

extendable up to 62 cms. with round base of dia.

295 Supplying , installing & testing approved make 3.00 Nos. 2654.28

Microphone for Speech, Music, & Close to lip singing

with inbuilt protection against breath & wind noise

with capability to capture sound from long distance

& wide area with frequency response 50 - 16000 Hz,

having sensitivity 1.8mv / Pa & impedance

ohms(Lo -Z) supplied with quick detachable holder,

Mtr long. Twin core cable & 3 pin XLR connector.

[[Approved by Competent Authority i.e. not Below

the rank of Executive Engineer ]

296 Supplying & erecting dual channel amplifier ,power 1.00 Nos. 11128.18

handling capacity of 180 watt ,four micro phone

inputs with independent level control ,built in FM

tuner,with preset memories,USB drive & SD card for

MP3 playback ,100v /telephone input with priority

and VOX,frequency response-80 Hz to 18k Hz

Philips / /distortion less than 1% @ rated power up

to 50 units [[Approved by Competent Authority i.e.

not Below the rank of Executive Engineer ]

297 Supplying and erecting wall mount speaker with 4.00 Nos. 2569.44

rated power of 30 watt/power tapping 30/15/7.5

watt available,opening angle 180 degree H *

degree V ,sound pressure level 88 dB ,frequency

response of 70Hz to 20KHz [[Approved by

Competent Authority i.e. not Below the rank of

Executive Engineer ]

Item Description of Item Quantity Unit Rate In Amount

298 SITC of 3LCD Lamp based projector having wxga 1.00 Nos. 33895.60

(1280x800) or better resolution with minimum

white brightness of 3800 lumens and color

brightness of 3800 lumens. The projector should

have minimum 1HDMI,1VGA input. Having contrast

ratio of 15000:1 or more. the projector should have

auto vertical key stone correction of +/- 30 degree

and Manual Horizontal of +/-30 degree. the projector

should have optical lens, throw ratio 1.30-1.56:1.

Zoom Factor of 1.2. Lens focus Manual having focal

length 16.9mm to 20.28mm. projector should have

features like AV mute slide, quick corner and split

function and should support wireless functionality

with inbuilt wifi or wifi dongle. [Approved by

Competent Authority i.e. not Below the rank of

Executive Engineer ] [Make - BenQ, Epson, Boss, LG,

299 SITC of 84 inch Self Lock MW (6 x 4) Instalock Slow 1.00 Nos. 3379.46

Retraction Screen, Aspect Ratio-4:3 [Approved by

Competent Authority i.e. not Below the rank of

Executive Engineer]

300 SITC of universal Projector mounting kit, with 1.00 Nos. 6848.81

necessary grouting, fasteners etc. with adjustable

height and suitable for all types of projectors.

[Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

301 Providing and erecting Inverter based approved 5.00 Nos. 51666.55

make split air-conditioning unit consisting of

condensing unit with variable speed fan motor,

inverter type hermetically sealed rotary compressor

with accessories etc. duly connected separately

erected evaporating unit and blower motor with its

accessories by means of extra supplied proper

insulated copper tubing,drain PVC pipes suitable for

(cost includes Eco Friendly green gas charging and

15A plug top & Remote Control & MS Stand) with

necessary core cutting. (1)For ISEER Range (KWH/

KWH) (3.1 to 3.99), (C) for 1.7 to 2 ton capacity

[Make:- Daikin, Hitachi, Voltas, Panasonic]

302 Supplying and erecting insulated pair of soft copper 20.00 Rn. 965.56

tubing open or concealed including power and Mtr.

control cable,necessary PVC drain pipes for Split AC

machine up to 4 TR capacity

Item Description of Item Quantity Unit Rate In Amount

303 Supply and Erecting of Static Stabilizer suitable for 5.00 Nos. 4029.90

following capacity of A.C Machine the Stabilizer Must

have Minimum Technical Specification are Input

working Single Phase Voltage Range Up to 150V-

280V 50Hz, Output Voltage Range Up to 200V-

240V,50Hz, Autoreset Facility,LED Display for

Indicating Voltage, Spike/ Surge Protection, Time

Delay Facility, Proper Wall Mount Facility with

Required Accessries & on site 3 year Replacement/

Repairing Warranty. (2) For 2 Ton Thermal Overload

Protection 15 Amp. [Make:- Gelco, V-guard,

304 Providing & erecting water cooler having storage 4.00 Nos. 55893.40

capacity 150 Ltr. & cooling capacity 150 Ltr.per hour

@ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚C within a hour, The water

cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank

surrounded by evaporating, coil, thermostats, relay

etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made

from Stainless Steel. [Make:- Voltas, Bluestar, Usha]

305 Supplying & erecting 5 stage single reverse osmosis 4.00 Nos. 55749.68

water purification system with M.S. powder coated

frame, prefilter housing with 'O' ring presediment

filter GAC filter, carbon filter suitable buster DC

pump capacity 80 psi, mention with 40 psi inline

type post carbon filter auto low & high pressure

switches with following size of storage tank & LPH

capacity & erected as directed, [C] 50 Ltr / Hr with

150 psi 2 nos booster pump

306 Supplying and erecting approved make panel 12.00 Nos. 1275.63

mounting type Digital Voltmeter having 3 digits

LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring etc

.with manufacturers calibration certificate.

307 Supplying and erecting approved make panel 12.00 Nos. 1558.43

mounting type Digital Ammeter having 3 digits LED

display, external CT operated, calibrated for 0 to

1000 Amps suitable to operate on 500 Volt AC

erected on existing panel board with all connection,

wiring etc. with manufacturers calibration certificate.

308 Supplying and erecting approved make set of 14.00 Nos. 43.43

indicator lamps of LED type lamp, lens cover,

Bakelite holder complete erected with necessary

Item Description of Item Quantity Unit Rate In Amount

309 Supplying and erecting Ammeter / Voltmeter 24.00 Nos. 317.14

selector switch for 3 phase AC Supply 500 V on

existing panel board with necessary connections.

310 Supplying and erecting LED indoor fittings with LEDs 253.00 Nos. 535.30

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/ watt, LED driver

efficiency > 85 % (fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings. The

Engineer incharge may select any wattage capacity

between the ranges shown.), (A) Tube Light with

integral driver (v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet, Cat-III [Make: -Phillips,

Crompton, Havells, Wipro, Jaquar, Osram]

311 Supplying and erecting led lamps with following 10.00 Nos. 112.11

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection, Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >= 0.5, (A) LED

Lamps integral type, with PC diffuser suitable LAMP

holder, (ii) 5 to 8 watts, Cat-III [Make: -Phillips,

Crompton, Havells, Wipro, Jaquar, Osram]

312 Supplying and erecting LED indoor fittings with LEDs 60.00 Nos. 758.51

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/

CRCA/ aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company

mark/ name 160V to 270V, Power Factor more than

0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/ watt , LED driver efficiency >

85% (fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings. The Engineer

incharge may select any wattage capacity between

the ranges shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20 (iv)

22-24 watts, Surge-2 KV, Cat-III [Make: -Phillips,

Crompton, Havells, Wipro, Jaquar, Osram]

Item Description of Item Quantity Unit Rate In Amount

313 Supplying and erecting LED street light / Flood light 33.00 Nos. 4997.48

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (ii)

above 48 to 60 Watts, Cat-III [Make: -Phillips,

Crompton, Havells, Wipro, Jaquar, Osram]

314 (C) Post Top Lantern LED fitting comprises of finish 4.00 Nos. 4819.72

cast aluminum spigot and spun aluminum canopy

fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired upto

terminal block.IP 65 (a) 40W, Cat-III [Make: -Phillips,

Crompton, Havells, Wipro, Jaquar, Osram]

315 (C) Post Top Lantern LED fitting comprises of finish 8.00 Nos. 9647.52

cast aluminum spigot and spun aluminum canopy

fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired upto

terminal block.IP 65 (B) Flood Light (IP-65), Surge

protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

(vi) above 160 to 200 watts, Cat-III [Make: -Phillips,

Crompton, Havells, Wipro, Jaquar, Osram]

316 Mains with ISI marked, 1.5KV grade electrolyte multi 16.00 Mtr. 300.98

stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically

for control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (i) One wire

35.00 sq. mm [Make:- Finolex, Havells, RR Cable,

Item Description of Item Quantity Unit Rate In Amount

317 Mains with ISI marked, 1.5KV grade electrolyte multi 84.00 Mtr. 236.34

stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically

for control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (h) One wire

25.00 sq. mm [Make:- Finolex, Havells, RR Cable,

318 Mains with ISI marked, 1.5KV grade electrolyte multi 294.00 Mtr. 56.56

stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically

for control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (e) One wire

6.00 sq. mm [Make:- Finolex, Havells, RR Cable,

319 Supply of Fibreglass Platform Step (A Type) Ladder - 1.00 Nos. 31636.23

15 FT having following specifications : It should have

large fully serrated platform 15” wide 20” deep

which locks ladder, Aluminium feet with thick rubber

tread, top rail guard to serve as a railing, two pairs of

gusset support at the bottom step and All gussets are

heavy duty steel. Capacity : 300 lbs

320 Providing and fixing approved make Perforated C 240.00 rmt. 496.92

type cable tray. Made from sheet steel. The cable

tray should be single or double bended as per

required and as per IS 2062/ 1079 and shall be

coated with hot dip galvanizing as per IS 2629/

4759. with max 17.5% perforation with coupler

plate / Fish plate and GI hardware like nut - bolt and

washers etc. erection with necessary support

(included) as per Specification and as per instruction

of engineer in charge. (4) 200 X 50 X 1.6 mm Thick

321 Providing and fixing approved make 'T' Junction for 6.00 Nos. 214.12

Perforated C type cable tray. Made from sheet steel.

The Junction should be bended as per IS 2062/1079

and shall be coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like nut -

bolt and washers etc. erected on existing support as

per Specification and as per instruction of engineer

in charge of following size

Item Description of Item Quantity Unit Rate In Amount

322 Providing and fixing approved make '90° Elbow' for 16.00 Nos. 171.70

Perforated C type cable tray. Made from sheet steel.

The Junction should be bended as per IS 2062/1079

and shall be coated with hot dip galvanizing as per IS

2629/4759. with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erected on

existing support as per Specification and as per

instruction of engineer in charge. (4)200 X 50 X

mm Thick 90° Elbow

323 Providing and fixing approved make Ladder type 48.00 Mtr. 287.85

cable tray. Made from M.S sheet. The cable tray

should be bended as per IS 2062/1079 shall be

fabricated of double bended channel section

longitudinal members with single bended Channel

section. Rungs of members welded to the base of the

longitudinal members at 250 mm c/c spacing . as

per IS and shall be coated with hot dip galvanizing as

per IS 2629/4759. with coupler plate / Fish plate

and GI hardware like nut - bolt and washers etc.

erected on existing support as per Specification and

as per instruction of engineer in charge. (2) 200 X

324 Supplying & erecting IP 55 grade following size 1.00 Nos. 3595.60

section pillar fabricated from joint less M.S. Sheet

with angle iron legs made from jointless M.S. Angle

with cable clamps to be buried in ground to have

appropriate erection to work uniform until erected

with cement concrete foundation and 45 cms high

bricks work finishing with plaster etc. hinged double

door internally supported on both side, with internal

and outside looking arrangement with look and keys

in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos.

one is welded and other with nut and bolt for

erecting bakelite sheet. Painting the Section Pillar

inside and out side with three tank powder coated

paint. section pillar roof should be without joint with

water leakage proof & tested as per IP 55 test &

followed by IS 2147 of 1962, (B) 75 X 60 X 45 cm

section pillar fabricated from 16 Guage MS Sheet

with angle iron legs 45 cms long made from 35 X

X 5 mm thick MS angle.

Item Description of Item Quantity Unit Rate In Amount

325 Supplying & erecting approved make SMC press 12.00 Nos. 524.19

moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with bakelite connector

strip 4way & hinged doors having locking

arrangements with mounting clamp with nuts, bolts

& washers suitable for erection on pole with cable

clamps& earth bolt of following size of box. (E)

200mm x 140mm x 125mm [deep]

326 Supply, Installation, Testing & Commissioning of 35.00 KW 42156.39

following size of Grid Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material :

Anodized Aluminum alloy Frame With Twin Wall

Profile, Front Cover : High Transmission Low-Iron

Tempered Glass (AR Coated), High efficency and

positive power tolerance Pmax: 0/+5, Module

Efficiency should be approx. 19.5%-22%, Normal

operating temperature 45'C, Junction Box with

Waterproof IP67 & MC4 Compatible and Enclosed

with Bypass diodes, 100% Electroluminescence test

to ensure error free Modules, Thep. temp. co-efficient

of the PV module shall equal or better than -

0.45%/degree C. Solar PV modules of minimum fill

factor 75% to be used. Unit Production:- More than

4.5 Unit /kw /day (Actual)(1Year Avg) With 10 year

Product warranty and 25 year Linear Power

Warranty includes all mechanical and electrical

parameters of the Solar panel. Modules must be

complied to the DCR(Domestic content

requirements). The Ration of AC to DC is 5:6 for the

Installation capacity which are given in AC KW. Solar

Inverter: MPPT Range: MPPT Range: 80-1000 V

Max efficiency: 97.5% - 98.9%, O/p Frequency:

50/60Hz, Operating Altitude (m) ≤4000, O/p Power

Factor: ~1, O/P THDi: <3%, Operating Tempreture

Range: -25~60°C, Integrated protection of Inverter

are Anti-islanding Protection, Ground fault

protection, PV array string fault Protection

Item Description of Item Quantity Unit Rate In Amount

Input Reverse Polarity Protection Integrated,

Insulation Resistor Detection Integrated, Residual

Current Monitoring Unit Integrated, Output Over

Current Protection Integrated, Output Short Circuit

Protection Integrated, Output Over Voltage

Protection Integrated, Protection Degree: IP65, User

Interface LCD & APP, Datalogger & Communication:

GPRS / Wi-Fi, Module Mounting Structure: The

mounting (Rectangular pipe / square pipe / circular

pipe) with requisite cross bars, nuts and bolts, etc.

shall be Hot deep galvanized with minimum

80micron coating. The Rectangular / square

/circular hollow pipe section used for the structure

should have a minimum thickness of 2.0 mm. other

than above, the material thickness should be

minimum 2.5 mm. A certificate of a structural

engineer certifying the strength and stability of the

mounting structure to withstand the weight and

wind speed of 150 km/hour throughout the life span

of 25 years of the system, shall be submitted by the

Hot Dipped Galvanized steel coils. suitable

arrangement for base plate for foundation , solar

panel mounting, the structure should be suitable for

carry the load of solar panel,wiring, sprinkler system

etc. with necessary foundation work/wall mount, j

bolt, anchor fastner etc. the nut bolt used for

installtion of stucture should be (SS 304) quality.

The ground clearance of the bottom most edge of

solar panel shall not be less than 300 mm to

mm or as per site’s technical/feasibility requirement.

a. Column –The minimum section (thickness) should

b. Rafter - The minimum section (thickness) should

c. Purlin - The minimum section (thickness) should

be 40MM * 40MM Balane of System with necessary

Swichgears (Suitabel size and protection of ACDB &

DCDB), inter connecting wiring, earthing system as

per the CEIG drawing approval, lightining arrester

system as per the CEIG drawing approval, all

liasoning work with various gov. dipartment like

state nodal agency,DISCOM & CEIG is included in

Item Description of Item Quantity Unit Rate In Amount

(Excluding All charges namely GEDA Application