Addition & Alteration Of Block Paving And Parking Shade At Ayurvedic Dispensary At Maroli.Tal.Jalalpore. Dist. Navsari

Name of work :- Addition & Alteration Of Block Paving And Parking Shade At Ayurvedic

Memorandum showing items of works to be carried out

It. Quantities Item of work Estimated Unit Total

No. estimated but In figures Amount

may be more Rs. Ps. according to

1 66.00 Cmt Box cutting the road surface to proper slope and 106.81 Cmt

camber for making a base for road work

including removing the excavated stuff and

depositing on the road side slope as directed

upto 50Mt.lead.

2 40.00 Cmt Construction of granular sub-base Grading-I by 736.29 Cmt

providing coarse graded B.T. machine crushed

material satisfying MOST specification of

grading I including spreading in uniform layers

with motor grader on prepared surface, mixing

by mix in place method with rotavator at OMC,

and compacting with vibratory roller to achieve

the desired density, etc complete.

3 28.00 Cmt Providing and laying cement concrete 1:2:4 ( 1 3713.67 Cmt

Cement : 2 coarse sand : 4 BT.M.C aggregates

40mm nominal size) and curring complete

excluding cost of form work in. ( A ) Foudation

4 263.00 Cmt and plinth and fixing pre-cast Rubber Dye inter

Providing 704.07 Cmt

locking concrete block 60mm thick with grade of

concrete M250 pnumatic compressed by

30.00 Cmt Providing pressed

& fixing and asshed

parking per approved

using M.S. Pipe 2045.25 Cmt

of 75 mm diameter in required shape and design

including bending of pipe and fixing it in CC M-

150 foundation of required size with 6 mm thick

Lexan Polycarbonate Multi Wall Roofing sheet

including one coat of primer and two coats of oil

painting complete as directed.

6 45.00 Cmt Providing 20 mm thick sand faced cement 375.52 Cmt

plaster with Gutkha Finish on wall upto all Full

hight above ground level consisting of 12mm

thick backing coat of c.m. 1:3 (1 cement :

sand) and 8 mm thick finishing coat of c.m. 1:1

(1 cement : 1 sand) etc. complete For All Full

7 107.00 Cmt Finishing wall with weather proof exterior 167.90 Cmt

emulsion paint on wall surface (two coats) to

give an required shape even shade after

thoroughly brushing the surface to remove all

dirt, and remains of loose powdered

materials.etc complete

8 36.00 Cmt Providing & fixing M.S. grill / M.S. door of 159.58 Cmt

required pattern to wooden frames of windows/

brick masonry with necessary M.S. angle, M.S.

pipe, M.S. flats and other structural steel at

9 1.00 Cmt required

Providingspacing and frameafalround

and Supplying square couch

Examlnatlon or 42319.00 Cmt

with full storage of Examination couch with full

storage-Overall dimension 1975 mm (L) x

mm (W) x 805 mm (HJ Examination couch with

three drawers with thick ERW tube The cabinets

should made of 1 mm thick CRCA sheet with

recessed plastic handles and three cabinets,

Inbuilt step stool and BP tray holder.the base

frame should made of 30 mm x 30mmX 1.6 with

lock and plastic door latch, the hindges of the

cabinet should be made of sheet metal and pin

arrangement The Internal dimension of the two

sldecablnets should be 422 mm (W) x 455 mm

(D) x 540 mm (H). the internal dimension of the

centarl cabinet should be 422 mm (W) x 455 mm

(D) x 358 mm (H). The storage cabinet unit

should be mount tubular base frame, The head

rest should be adjustable on gas spring which

should be actuated with C shaped handle lever.

The drawers should made of 1 mm thick CRCA

sheet with recessed plastic handles and work on

double extension ball slides for smooth glide. the

internal dimension of the drawer should be

mm.(W) x 427 mm (DJ x 92 mm (H). The

mattress platform should be 65 mm thick which

is made of 12 mm thick ply and PU foam and

covered with leatherite cover the cover should

10 2.00 Cmt Providing & Supplying Public Seating Seat Shell 20705.00 Cmt

:- The Seat is made from high density Self Skin

Polyurethane From Reinforced With 1.2 MM

M.S perforated Sheet Insert.The Polyurethane

Foam Having density of min 350 kg/m3 with a

shore "A" hardness of 60 +- 10 Seat Size :-

52.00 cm x 50.5 cm (D) Back Shell :- The Back

Is made from high Density Self-skin

Polyurethane Form Reinforced With 1.2 mm

M.S perforated sheet insert. The Polyurethane

Foam having Density of 350kg/m3 with a Shore

'A' hardness of 60 +- 10 Seat Size :- 52.00 cm x

53.50 cm (H)CROSS BEAM : Cross Beam made

up of diamoubd Shaped double wall extrusion of

Aluminum 6063·T A Joy with Coated of

micron epoxy polyester coating and fitted with

polyropylene copolymer engineering plastic end

caps. Cross Beam Size : 11.30 cm x 9.4 cm x

cm. LEGS :- Legs are made up of High pressure

Aluminum ADC12 Die cast coated with

micron Epoxy polyester coating,Leg Are fitted

with soft grip grip PVC level adjusting

shoes.ARMREST :- Armrest are made up of

High pressure Aluminum ADC12 die cast coated

with 50 micron el)oxy polyester coating

11 6.00 Cmt Providing and Supplying of round stool should 1565.50 Cmt

have of'round stool. Overall dimension should

be Diagonal Leg Dia. 538 mm H4 70 tnin-

655max. Top plate made of SS 304 made sheet

with spin section of thickness lmm and non

12 corrosive. Itand

2.00 Cmt Providing hasSupplying

a diameter storwel

Storwel 14544.00 Cmt

plain with Gordian Lock shall have an overall

size of 916mm(W)x486mm(D)xl 981mm(H)

with welded construction. It should.have the

shelf thickness of 0.7 mm, Back thickness of

1.00 Cmt Providing thickness

and Placingof inquiry

O.Bmm (high yieldwith

counter 61812.00 Cmt

Worksurface of size w. 3665 X D 1060 X H

Worksurface and 1350 counter made of-

Decorative LaminateParticle board 25mm thick.

lnside radius 700.0 mm outside radius·

mm Depth-650 mm. Rubberized cork· 18mm

thick. should have Glass Frosted of10mm thick

Diamond cut finishing on edges. Inside Radius·

1202.Sinm Outside radius· 140t5mm Depth-

Zullrnm *Note: Angle sustained within arc

surface is 60 deg. Understructure should have

Modesty Panel MS Perforated sheet Below

Worksurface: 0.8 mm (thick) x 665.0mm

(height) x 1345.0 mm (flat length) Above

Worksurface: O.Bmm (Thick) x 260 mm

(height) x 1345.0 mm (flat length). Legs MS

tube 1.6 mm thick Diameter 50.8 mm Height

14 2.00 Cmt Supplying And Placing Of Folding Wheel Chair 16452.90 Cmt

With Overall Dimension: (L) 790 X (W) 600X

(H) 870Mm Frame Structure Foldable Frame

Structure Is Made Of Section 22X1.2Mm A3

Carbon Steel With Chrome Finish. Cross Bar

Are Made Of A3 Carbon Steel With Section

25.4 X l.2Mm. Rear Wheel 24 Inch Solid Mag

Wheels With:Alloy In The Rim Hand Rim

Integrated Hand Rim Provide To Drive The

Wheel Chair Of Section 16X1.2Mm A3 Carbon

Steel With Chrome Finish Front Wheel 8 Inch

Hub Made bf Pa Polymer And Outer With Solid

Rubber Arm Rest Pu Molded Arm Rest & Base

Is Made Of Abs For Better Arm Support Calf

Rest & Seat Leatherette Strap For Calf Rest &

Leatherette Cushion For Seat Footrest

Adjustable Alluminimurri Die Cast Foot Rest

Swivel Type Mechanism Push Handle Handles

Are Made Of Moulded Rubber Grip To Push

The Wheelchair Brakes Hand Brakes Are

Provided To Lock The Wheelchair At Desired

Location. Foot Press Extended Base With

Molded Plastic For Better Grip Finish Anti Rust

Chrome Finish Safe Working Load 100Kg

Rs. Six Lack Fourty Four Thousand Five Hundred Fourty Eight and Paise Eleven Only.

I/We am/are willing to carry out the work at ________________ % above/below ( percent

should be written in figures and in words ) of the estimated rates mentioned above. Amount of my/our tender

works out as under.

*Estimated amount *Estimated amount

put to tender Rs. _____________ put to tender Rs. _______________

Deduct ____ % below Rs. _________ Add ____ % above Rs. _________

Net Rs. _________ Total Rs. _________

*( Please strike out which ever is not applicable )

Note 1:- All Works shall be carried out as per Public Work Department Handbook and other

specification of Division or as Directed.

Note 2 :- All the columns Is Schedule Should be filled in ink and the total of the entries in the last

column should be struck by the contractor under his signature.

Note 3:- Rates Quated include clearance of site (prior commencement of work and at its close) in all

respect and hold good for work under all conditions, site, moisture, weather etc.

Note 4:- to be continued on additional sheets , if found necessary.

Note 5:- The above Schedule Rates are Excluded GST.

Signature of Bidder Executive Engineer

Panchayat (R&B) Division