C/o Farmer Facilitation center Gorda

Amount

Earth work in excavation all types of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form work for : Lintels, beams, plinth beams, girders, bressumers and cantilevers within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form work for : Suspended floors roofs slabs landings etc. within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form work for : edges of slabs and breaks in floor and walls within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying in position cement concrete of 1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering reinforcement concrete in retaining walls, breast walls as per drawing and HPPWD technical specifications within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - in suspended floors : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, with reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, with 1:1.5:3 (1cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying cement concrete 1:2:4(one cement:two sand :four graded stone aggregate 20mm (forty milimeter)nominal size)mechanical mixed and vibrated and curing complete excluding cost of form work in foundation and plinth in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing mild steel/Tor Steel reinforcement for R.C.C. work including bending, binding also cost of Binding wire and placing in position complete upto all floor level including carriage of material in all lead and lift complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Second class brick masonary in common burnt clay building bricks in superstructure in Cement Mortar 1:4 (1cement: 4 sand) including carriage of materials in all lead, lift and upto all heights complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Second class brick masonary in common burnt clay building bricks in foundation and plinth cement mortar 1:6 (one cement: six Sand) . including carriage of materials in all lead, lift and upto all heights complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Half brick masonry (2nd class ) in cement mortar 1:4( 1Cement:4 Sand ) including carriage of materials in all lead, lift and upto all heights complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying hand packed kharuanja stone soling including carriage of material upto all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying Kota stone slab flooring 20mm ( average) thick base of cement mortor 1:4 ( 1 cement : 4 sand) and jointed with cement slurry mixed with pigment to match the shade of the slab i/c rubbing and polishing complete in all respect and to the entire satisfaction of the Engineer-in-Charge (for Flooring)

Providing and laying Kota stone slab flooring 20mm ( average) thick base of cement mortor 1:4 ( 1 cement : 4 sand) and jointed with cement slurry mixed with pigment to match the shade of the slab i/c rubbing and polishing complete in all respect and to the entire satisfaction of the Engineer-in-Charge (for Marble skirting/dado).

15 mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and /or rounded angles not exeeding 80mm in grith and finished even and smooth in cement mortar 1:6 complete in all respect and to the entire satisfaction of the Engineer-in-Charge (for Flooring)

20 mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and /or rounded angles not exeeding 80mm in grith and finished even and smooth in cement mortar 1:4 complete in all respect and to the entire satisfaction of the Engineer-in-Charge (for Flooring)

Supplying and filling bricks bats in soak pit complete in all respect and to the entire satisfaction of the Engineer-in-Charge

Filling in plinth with course sand under floor including, watering, ramming, consolidating and dressing complete in all respect and to the entire satisfaction of the Engineer-in-Charge

Providing & fixing cast iron cover for frame of internal size 500x500mm with frame(midium duty) complete in all respect and to the entire satisfaction of the Engineer-in-Charge

40mm(fifty milimeter) thick cement concrete flooring 1:2:4(one cement:two sand:four graded stone aggregate 20mm(twenty milimeter) nominal size) laid in one layer finished with a floating coat of neat cement as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing on wall face P.V.C. (D-Plast) or equivalent Rain water pipes including fillings the joints with approved adhesive 100mm(one hundred millimeter) in all heights and all floor level complete in all respect and to the entire satisfaction of the Engineer-in-Charge

Providing and fixing PVC cowl ISI marked including fixing with approved adhesive etc. complete. as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. complete in all respect and to the entire satisfaction of the Engineer-in-Charge

Providing and fixing anodised aluminium work for door, window ,ventilators and partitions with extruded built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC15) fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fastenrs i/c necessary filling up of gaps at junctions, at top , bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleast angle, aluminium, snap beading for glazing/ panelling C.P. brass / stainless steel screws complete as per Architectural Drawings and the direction of the Engineer -in Charge. Including carriage of material in all lead and lifts (JINDAL Make) For door window and ventilator and glazed partition frames including carriage of material in all lead and lifts complete with all accessories as required as per the direction of Engineer in Charges.

Providing and fixing anodised aluminium work for door, window ,ventilators and partitions with extruded built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC15) fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fastenrs i/c necessary filling up of gaps at junctions, at top , bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleast angle, aluminium, snap beading for glazing/ panelling C.P. brass / stainless steel screws complete as per Architectural Drawings and the direction of the Engineer -in Charge. Including carriage of material in all lead and lifts (JINDAL Make) For shutter of doors windows and ventilators including providing and fixing hinges/piovts and making provisions for fixing of fitting where ever required including the cost of PVC/neoprene gaskets as required (fitting and glazing/panelling shall be paid for separately) Including carriage of material in all lead and lifts complete with all accessories as required as per the direction of Engineer in Charges.

Providing & fixing glazing in aluminium door, window, ventilator shutters & partition etc with PVC/ neoprene gaskets etc complete as per the architectural drawing & the direction of the Engineer-in -Charge (cost of aliminnium snape beading shail be paid in basic item) Including carriage of material in all lead and lifts. (JINDAL make) Glazing with glass panes of 5.5mm thickness (Make - Saint Gobain or Modi guard) (weight not less than 13.75 kg/sqm.) including carriage of materials in all lead and lifts complete with all accessories as required as per the direction of Engineer in Charges.

Pre-laminated with decorative lamination on both side exterior Grade-I MDF Board 12 mm thick confirming to IS:14587 complete with all accessories as required as per the direction of Engineer in Charges.

Providing & fixing fly proof galvanized MS wire gauge of IS gauge designated 85G with wire of dia 0.56mm to window and clear story window including beeding of anodized aluminiumincluding carriage of material in all lead, lifts upto all heights complete with all accessories as required as per the direction of Engineer in Charges.

Providing and fixing anodized aluminium sliding door bolts (JINDAL make or equivalent) anodized colour and transparent or dyed to required colour shade with bolts and nuts screws etc. Complete. Including carriage of material in all lead and lifts 300x16mm complete with all accessories as required as per the direction of Engineer in Charges.

Providing and fixing aluminium tower bolts (berrel type) (JINDAL makeor equivalent) anodized trans parent or dyed to required shade and colour with screws etc. Complete. Including carriage of material in all lead and lifts complete with all accessories as required as per the direction of Engineer in Charges. (200 x 10 mm)

Providing and fixing aluminium tower bolts (berrel type) (JINDAL makeor equivalent) anodized trans parent or dyed to required shade and colour with screws etc. Complete. Including carriage of material in all lead and lifts complete with all accessories as required as per the direction of Engineer in Charges. (150 x 10mm)

Providing and fixing aluminium handles 125 mm (JINDAL make or equivalent) anodized transparent or dyed to required colour & shade with necessary screws etc. Complete including carriage of material in all lead and lifts complete with all accessories as required as per the direction of Engineer in Charges.

Providing and fixing 100mm bright finished brass floor door stopper (KICH or ACME make) with rubber cushion screws etcetra to suit shutter thickness complete including carriage of material in all lead and lifts complete with all accessories as required as per the directions of Engineer-in-Charge.

Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. Including carriage of material in all lead and lifts (KICH or ACME make) including carriage of material in all lead and lifts complete with all accessories as required as per the direction of Engineer in Charges.

Applying Birla wall care putty over plaster surface after throughly brushing the surface free from mortar drops , dust, loose materials and other foreign matters and papered smooth to give final matter finish to the surface complete including carriage of material in all lead, lifts upto all heights complete in all respects as per direction of Engineer in Charges.

Distempering two coats with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer.including carriage of material in all leads, lifts and height complete in all respects as per direction of Engineer in Charges.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed of dry brick/stone aggregate 40mm nominal size) with rammed and consolidated and grouted with fine sand including preparetion of ground. including carriage of material in all leads and lifts complete in all respects as per direction of Engineer in Charges.

Providing plinth protection 50mm thick with cement concrete 1:3:6 (1Cement : 3 Sand : 6 graded stone aggregate 20mm nominal size) including carriage of material in all leads and lifts complete in all respects as per direction of Engineer in Charges.

Constructing course rubble hammer dressed 'U' Shape open surface drain with side wall. 15x22 cm. in cement mortar 1:6 (1 cement : 6 sand) and inside plastering with cement plaster 1:3 (1 cement : 3 sand) including earthwork and laying 10cm cement concrete in 1:5:10 (1cement : 5 sand : 10 aggregate of 40mm nominal size) and 7.5cement concrete 1:2:4 (1cement :2sand: 4 aggregate of 20mm nominal size) and finished with a floating coat of neat cement complete as per standard design. including carriage of material in all leads and lifts complete in all respects as per direction of Engineer in Charges.

Providing and fixing MS fan clamp type - I pf 16 mm dia MS bar bent to shape witjh hooked ends in RCC slab during laying including painting the exposed portion of loop, all as per standard design complete in all respects as per direction of Engineer in Charges.

Providing & fixing of wall tiles (Brick Type) in Cement Mortar 1:3 complete in all respect including carriage of material in all leads and lifts complete in all respects as per direction of Engineer in Charges.

Providing & Laying in trenches HDPE pipesof following diameters & classes as per IS 4984 , PE-80 and jointing the pipes through push type compression joints by hydraulically operated machines upto 90 mm diameter and butt fussion ( heat fusion process) above 90 mm diameter i/c necessary fittings,bends,tees & reducers fabricated in accoradance with IS 8360 & IS 8008 with latest ammendments & shall be provided as per site conditions.Flanging of the pipes shall be made as& where required confirming to code IS 8008 & IS 7634, stub ends will be welded on pipes & MS flange shall be provided with slip on covered by epoxy coating/plastic powder. The flange should be confirm to ANSI B 16.5 with necessary nuts & Bolts. Jointing shall be complete in all respects i/c testing at site upto entire satisfaction of engineer-in charge. Weep Holes in Retaining Wall 90 mm Dia HDPE Pipe

Providing & Laying precast cement concrete inter locking paver blocks vibro compacted upto M-25 grade i/c border or kurb block approved colored over sub base with 25mm thick average thickness with sand leveling (subbase concretefloor to be paid for 60 mm thick inter locking block complete in all respects as per direction of Engineer in Charges.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group C

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and fixing bakelite batten/angle holder including connections etc. as required.

Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps. Cat-B.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-Single door-12 way

Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps. Cat-A.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-Armoured cable 6 sq. mm (twin core)

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- Ceiling Fan 1400 mm sweep, Category-A

Providing and fixing shock proof slim decorative extruded fixture with domestic electronic ballast, suitable for 36 watt FTL (T8), complete with all accessories (including the T-8 Tube), connections, testing and commissioning etc. as required 1 x36 watt-FTL(T8) (Category-A).

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Providing and fixing to wall ceiling and floors galvanized mild steel tubes (Medium grade) tube fittings and clamps including making good the wall, ceiling and floors, including carriage of material in all leads and lifts, confirming to BIS specification:- 15 mm nominal bore

Providing and fixing to wall ceiling and floors galvanized mild steel tubes (Medium grade) tube fittings and clamps including making good the wall, ceiling and floors, including carriage of material in all leads and lifts, confirming to BIS specification:- 20mm nominal bore

Providing and fixing polythene water storage tank for storage of water up to all heights keeping water hygienic and safe for drinking etc. moulded to seemless perfection for FDA approved grade of polythene (LDPE/HDPE/CLDPE) to BIS 12701-1989 with 40mm nominal bore galvanized steel scour tube with fittings 25mm nominal bore galvanized mild steel overflow tubes with fittings and mosquito proof coupling of approved municipal design 15mm nominal bore- ball valve and mosquito proof galvanized coupling including providing pads of sizes as required and complete with inlet and outlet tubes as per direction of the Engineer-in-charge including carriage of material in all leads and lifts(ISI mark) 1st quality. 1000 litres net capacity.

Providing and fixing high pressure PVC spigot and socket soil waste and ventilating pipes ISI marked including fixing with approved Adhesive etc.complete:- 75 mm nominal bore

Providing and fixing high pressure PVC spigot and socket soil waste and ventilating pipes ISI marked including fixing with approved Adhesive etc.complete:- 110 mm nominal bore

Providing and fixing PVC Door bend with oval acess door insertion rubber washer 3mm thick bolts and nuts 75 mm nominal borecomplete including fixing with approved adhesive complete etc.

Providing and fixing PVC Door bend with oval acess door insertion rubber washer 3mm thick bolts and nuts 110 mm nominal bore complete including fixing with approved adhesive complete etc.

Providing and fixing PVC plain bend with collars Door bend with oval acess door insertion rubber washer 3mm thick bolts and nuts 75 mm nominal bore complete including fixing with approved adhesive complete etc.

Providing and fixing PVC plain bend with collars Door bend with oval acess door insertion rubber washer 3mm thick bolts and nuts 110 mm nominal bore complete including fixing with approved adhesive complete etc.

Providing and fixing PVC Single Tee equal branh plain ISI Mark including fixing with approved adhesive etc. 75 mm nominal bore complete including fixing with approved adhesive complete etc.

Providing and fixing PVC Single Tee equal branh plain ISI Mark including fixing with approved adhesive etc. 110 mm nominal bore complete including fixing with approved adhesive complete etc.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive etc. complete cost of cutting and making good the walls and floors etc. complete. 75mm nominal size

Providing and fixing vitreous china wash down water closet (European type W.C. pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1(1cement:1sand) (seat and cover to be measured and paid for separately including carriage of material in all leads and lifts:- Ordinary closed.

Providing and fixing 9.00 litres capacity low level PVC flushing cistern with a pair of C.I. or mild steel brackets, complete with fittings and derlin valve for connection with inlet and outlet and overflow pipes etc. including cutting holes in walls and making good the same including carriage of material in all leads and lifts, Confirming to BIS specification.

Providing and fixing G.I. inlet connection for flush pipe with W.C. pan including carriage of material in all leads and lifts.(confirming to BIS specification).

Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers:- Solid type white plastic seat and cover including carriage of material in all leads and lifts.

Providing and fixing vitreous china wash basin with single/double holes for pillar tap with C.I. or M.S. brackets painted white including holes and making good the same but excluding fittings confirming to BIS specification including carriage of material in all leads and lifts:- Flat back 550mmx400mm

Providing and fixing C.P. brass waste for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing M.I. union for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifs.

Providing and fixing P.V.C. plastic waste pipe for wash basin or sink of following size BIS specification including carriage of material in all leads and lifts.32mm mm dia.

Providing and fixing stainless steel grating 100mm confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of material in all leads and lifts confirming to BIS specification.

Providing & Fixing CP brass soap dish with CP brackets fixed to wodden plugs with CP brass screw

Providing and fixing C.P. brass bib tap with capastan head including carriage of material in all leads and lifts confirming to BIS specification:- 15mm dia.

Providing and fixing C.P. brass angle valve 15mm dia confirming to BIS specification including carriage of material in all leds and lifts.

Providing and fixing C.P. stop cocks confirming to BIS specification including carriage of material in all leads and lifts:- 15mm dia.

Providing and fixing C.P. Brass concealed stop cock 15mm dia (confirming to BIS specification) including carriage of material in all leads and lifts.

Providing and fixing PVC connection pipe with brass union 45 cm length 15mm nominal bore including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing brass full way valve with wheel confirming to BIS specification including carriage of material in all leads and lifts:-15 mm nominal bore.

Providing and fixing brass full way valve with wheel confirming to BIS specification including carriage of material in all leads and lifts:-20 mm nominal bore.

Constructing manhole with RCC top slab in 1:2:4mix(1cement:2sand:4graded stone aggregate 20mm nominal size) foundation concrete 1:4:8(1cement:4sand:8graded stone aggregate40mm nominal size) inside plastering 15mm thick with cement mortar 1:3(1cement:3sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4mix (1cement:2sand:4graded stone aggregate 20mm nominal size)finished smooth complete including curing and testing including carriage of material in all leads and lifts:-Inside size 800mmx800mmx 500mm deep including C.I. cover with frame (light duty single seal pattern-I) 455mmx610mm internal diamension total weight of cover and frame to be not less than 38 kg.(weight of cover 23 kg and weight of frame- -15kg) with 200 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(1cement:3sand).

Cutting holes through existing brick/stone walls including making good the same in cement mortar 1:6(1cement:6sand) per cm depth of cutting: Holes up to and including 400 mm square centimeter in area including carriage of material in all leads and lifts.

Providing and fixing GI fittings:- GI union 15 mm dia

Providing and fixing GI fittings:- GIS union 20 mm dia.

Providing and fixing P.V.C. IS marked fitting including fixing with approved adhesive extra complete P.V.C socket Bend 110 mm dia.

Providing and fixing P.V.C. IS marked fitting including fixing with approved adhesive extra complete P.V.C socket Bend 75 mm dia.

Providing and fixing P.V.C. IS marked fitting including fixing with approved adhesive extra complete P.V.C clamps 110 mm dia.

Providing and fixing P.V.C. IS marked fitting including fixing with approved adhesive extra complete P.V.C clamps 75 mm dia.

Sushil Sharma (BID ID -508171)

ONAM SHARMA (BID ID -508234)