Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹46.6 LAdmitted-Finance | L1 | Admitted-Finance | ||
| 2 | L2₹51.9 L+₹5.4 L (11.5%)Admitted-Finance | L2 | Admitted-Finance | ||
| 3 | L3₹52.3 L+₹5.8 L (12.4%)Admitted-Finance | L3 | Admitted-Finance | ||
| 4 | L4₹52.4 L+₹5.8 L (12.5%)Admitted-Finance V P O UTTAR KRISHNAPUR PT I PS SILCHAR SADAR CACHAR ASSAM 788006 | CACHAR | ASSAM | 788006 | L4 | Admitted-Finance | ||
| 5 | Rejected-Technical | - | Rejected-Technical Submitted Bankers Certificate does not fulfill the minimum criteria i.e. 40 percent of ECPT |
Tender Value
₹72.8 L
EMD Value
₹1.5 L
Closing Date
26 Sept 2026, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Registrar NIT Silchar
NIT Silchar
Painting and renovation work of New Guest House Block at NIT Silchar.
2026_NS_925745_1
NIT-E/Estate/2026-27/05 Sl. No. 01
Open Tender
Civil Works
Percentage
NIT Silchar
Please refer Tender documents.
4 documents required · 4 mandatory
₹2,000
National Institute of Technology Silchar
₹1.5 L
12 Oct 2026
11 Sept 2026
28 Sept 2026
11 Sept 2026
26 Sept 2026
11 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) | 1,184.29 | Sqm | 582.92 | ₹6,90,346.33 |
| 2 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | 14,132.74 | Sqm | 20.54 | ₹2,90,286.48 |
| 3 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 3,588.75 | Sqm | 162.29 | ₹5,82,418.24 |
| 4 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | 6,955.24 | Sqm | 76.91 | ₹5,34,927.51 |
| 5 | Wall painting with acrylic emulsion paint, having VOC (Volatile OrganicCompound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats | 4,743.01 | Sqm | 142.95 | ₹6,78,013.28 |
| 6 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Old work (one or more coats) | 2,212.22 | Sqm | 64.48 | ₹1,42,643.95 |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work | 2,498.68 | Sqm | 106.91 | ₹2,67,133.88 |
| 8 | Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 7,177.51 | Sqm | 167.02 | ₹11,98,787.72 |
| 9 | Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints. 300mm wide | 20 | metre | 1,256.37 | ₹25,127.4 |
| 10 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar | 20 | Sqm | 716.46 | ₹14,329.2 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 11.78 MB
TechnicalBidUpdated.pdf
Tender Documents • 0.93 MB
TermsconditionsUpdtd.pdf
Additional Documents • 1.15 MB
EMDandtenderfee.pdf
Additional Documents • 0.36 MB
BOQ_972826.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .