REPAIRS TO STEEL OR WOODEN FURNITURE INCLUDING POLISHING AND PAINTING AT PANGODE MILITARY STATION UNDER GE ARMY TRIVANDRUM

Amount

Almirah Large Steel (FD-1031 & FD-1033)

M/L for removing UNSV leg from almirah large steel and S&F leg made of 1mm thick MS sheet as per drg and specification.

M/L for removing UNSV shelf from almirah large steel and S&F shelf made of 1mm thick MS sheet as per drg and specification.

M/L for removing UNSV 3 way locking device from almirah large steel and S&F 3 way locking device as per existing pattern of drg and specification.

M/L for removing UNSV cleates from almirah large steel and S&F new cleates as per drg and specification.

M/L for removing UNSV locks from almirah large steel and S&F new locks of approved make as per drg and specification.

M/L for removing UNSV CP handle from almirah large steel and S&F new CP handle and appropriate bush as per drg and specification.

M & L for preparation of inner and outer surface of Almirah large steel and filling welded joint gap with putty, removing minor bends & dents and applying one coat of synthetic enamel paint Olive Green colour complete all as specified and directed.

Almirah Medium steel (FD-1032)

M/L for removing UNSV leg from almirah medium steel and S&F leg made of 1mm thick MS sheet as per drg and specification.

M/L for removing UNSV shelf from almirah medium steel and S&F shelf made of 1mm thick MS sheet as per drg and specification.

M/L for removing UNSV 3 way locking device from almirah medium steel and S&F 3 way locking device as per existing pattern of drg and specification.

M/L for removing UNSV locks from almirah medium steel and S&F new locks of approved make as per drg and specification.

M/L for removing UNSV CP handle from almirah medium steel and S&F new CP handle and appropriate bush as per drg and specification.

M & L for preparation of inner and outer surface of Almirah med steel and filling welded joint gap with putty, removing minor bends & dents and applying one coat of synthetic enamel paint Olive Green colour complete all as specified and directed.

Charpoy GI Pipe 32mm with plywood top (FD-220)

M/L for removing UNSV plywood and MS flat iron from charpoy GI pipe and tightening the frame and S&F MS flat iron 40mmx3mm each 2 Nos welded as per existing pattern and S&F new plywood 12mm BWR of approved make with appropriate 6mm screw headless as directed by Engineer-in-charge.

M/L for removing UNSV long rail from charpoy GI 32mm and S&F new long rail as per drg and specification.

M/L for removing UNSV short rail and made short rail from UNSV long rail removed from existing charpoy and fix as per drg and specification.

M/L for removing UNSV leg and made leg from UNSV short rail removed from existing charpoy and fix arrangement for musquito frame holder as per drg and specification.

M/L for removing UNSV elbow from charpoy GI and S&F new elbow 32mm of approved make as per drg and specification.

M/L for removing UNSV check nut from charpoy GI and S&F new check nut 8mm as per drg and specification.

Chair Verandah (FD-256 & FD-259)

M/L for for removing UNSV cane from chair verandah and clean the surface with steel brush and apply one coat of paint enamel white with entire satisfation and caning with 4mm wide cane of approved make in mate pattern and S&F rubber shoe of best quality as per drg and specification.

Spot welding shall be done as required as directed by Engr-in-charge. (spot size not less than 10mm).

Locker Bedside Steel (FD-1029)

M/L for removing UNSV leg from locker bed side steel and S&F leg made of 1mm thick MS sheet as per drg and specification.

M/L for removing UNSV hanging rod and S&F new CP hanging rod 18mm as per drg and specification.

M/L for removing UNSV hasp and stapple and S&F new hasp and stapple 100mm of best quality be fixed with appropriate nut and bolt as per drg and specification.

M/L for removing UNSV handle 100mm and S&F new CP handle 100mm of best quality be fixed with appropriate screw as per drg and specification.

M & L for preparation of interior and exterior surfaces of locker bed side steel and filling with metal putty and denting and applying one coat of synthetic enamel paint OG colour complete all as specified and directed.

Spot welding shall be done as required as directed by Engr-in-charge. (spot size not less than 10mm).

Table 3'x3'x760mm Steel (FD-1009)

M/L for removing UNSV top from table 3'x3' steel and S&F new top made out of 18mm thick prelamintaed particle board beaded with 4mm thick teak wood beading and apply french polish as per drg and specification.

M/L for preparation the suface and apply one coat of synthetic enamel OG in entire satisfaction as directed.

Spot welding shall be done as required as directed by Engr-in-charge. (spot size not less than 10mm).

Chair CBA steel (FD-75M )

M/L for removing UNSV seat and back from chair CBA steel with arms and clean the surface and apply one coat of paint synthetic enamel OG as per drg and specification.

S&F seat with appropriate screw to chair CBA steel made out of Ist class teak wood and apply black synthetic enamel paint and wooven with 2mm cane plastic with perimeter wooven with 3mm cane as per drg and specification.

All as per item No 7.02 but back.

M/L for removing UNSV arm rest and S&F new arm rest as per drg and specification.

Chair CBB steel (FD-75M )

M/L for removing UNSV seat and back from chair CBB steel with out arms and clean the surface and apply one coat of paint synthetic enamel OG as per drg and specification.

S&F seat with appropriate screw to chair CBB steel made out of Ist class teak wood and apply black synthetic enamel paint and wooven with 2mm cane plastic with perimeter wooven with 3mm cane as per drg and specification.

All as per item No 8.02 but back.

Charpoy T/S for OR with ply top (CECZ-FD 77/ FD/E6/MAP-II/01)

M/L for removing UNSV plywood from Charpoy T/S for ORS and S&F new plywood 12mm commercial BWR with appropriate nut and bolt as per drg and specification.

M/L for clean the surfaces and apply one coat of synthetic enamel paint black as directed.

M/L for S&F shoes rubber of superior quality.

Table Office Clerk Steel (FD-1004)

M/L for clean the surfaces, dents and bends and apply one coat of synthetic enamel paint OG as directed.

M/L for removing UNSV top from table clk steel and S&F new top made out of 18mm thick prelamintaed particle board beaded with 4mm thick teak wood beading and apply french polish as per drg and specification.

Spot welding (spot size not less than 10mm)

Table Office Officer Steel (FD-1003)

M/L for clean the surfaces, dents and bends and apply one coat of synthetic enamel paint OG as directed.

M/L for removing UNSV top from table office offr steel and S&F new top made out of 18mm thick prelamintaed particle board beaded with 4mm thick teak wood beading and apply french polish as per drg and specification.

Spot welding shall be done as required as directed by Engr-in-charge. (spot size not less than 10mm).

Table 3x2 with dr steel

M/L for removing UNSV top from table 3x2 with drawer steel and S/F new top made of prelaminated particle board 18/19mm and 4mm teak wood beading around the top as per drg and specification.

M/L for clean the surfaces, dents and bends and apply one coat of synthetic enamel paint OG as directed.

Teapoy verandah

M/L for removing UNSV top from Teapoy verandah and apply one coat of paint enamel white and S/F new top made of prelaminated particle board 18/19mm and 4mm teak wood beading around the top as per drg and specification.

Spot welding shall be done as required as directed by Engr-in-charge. (spot size not less than 10mm).

Table Dining 6/8 Persons (FD-239, 273 & 376)

M/L for removing UNSV top from table dining 6 pers and apply french polish in high glossy finish and S&F new top made out of 18mm thick prelamintaed particle board beaded with 4mm thick teak wood beading and apply french polish as per drg and specification.

M/L for replacement of long rail made of Ist class teak wood as per drg and specification.

All as per item No 14.02 above but short rail.

All as per item No 14.02 above but corner.

M/L for removing UNSV top from table dining 8pers and apply french polish in high glossy finish and S&F new top made out of 18mm thick prelamintaed particle board beaded with 4mm thick teak wood beading and apply french polish as per drg and specification.

M/L for replacement of long rail made of Ist class teak wood as per drg and specification.

All as per item No 14.06 above but short rail.

All as per item No 14.06 above but corner.

Chair Dining (FD - 228, 270 & 279)

M/L for removing UNSV front leg from chair dining and S&F new front leg made out of Ist class teak wood free from creaks and knots as per drg and specification.

All as per item No 15.01 above but back leg.

All as per item No 15.01 above but front rail.

All as per item No 15.01 above but back rail.

All as per item No 15.01 above but side rail.

All as per item No 15.01 above but stiffener complete.

M & L for removing UNSV cane from chair dining and re-caning with 2 mm wide plastic cane, half round and perimeter wooven with 3 mm wide cane plastic and clean the surface and apply french polish in high glossy finish complete all as specified and directed.

Chair Easy (FD-17(M) & 229)

M/L for removing UNSV front leg from chair easy and S&F new front leg made out of Ist class teak wood free from creaks and knots as per drg and specification.

All as per item No 16.01 above but back leg.

All as per item No 16.01 above but front rail.

All as per item No 16.01 above but back rail.

All as per item No 16.01 above but side rail.

All as per item No 16.01 above but cane patti.

M & L for removing UNSV cane from chair easy seat and back and re-caning with 2 mm wide plastic cane, half round and perimeter wooven with 3 mm wide cane plastic and clean the surface and apply french polish in high glossy finish complete as per drawing all as specified and directed.

Chair Writing (FD-280)

M/L for removing UNSV front leg from chair writing and S&F new front leg made out of Ist class teak wood free from creaks and knots as per drg and specification.

All as per item No 17.01 above but back leg.

All as per item No 17.01 above but front rail.

All as per item No 17.01 above but back rail.

All as per item No 17.01 above but side rail.

All as per item No 17.01 above but stiffener complete.

All as per item No 17.01 above but arm rest.

M & L for removing UNSV cane from chair writing and re-caning with 2 mm wide plastic cane, half round and perimeter wooven with 3 mm wide cane plastic and clean the surface and apply french polish in high glossy finish complete as per drawing all as specified and directed.

Bed Plywood Top (FD-246 & 247)

M/L for removing UNSV plywood from bed hard and S&F new new plywood 12mm commercial BWR with appropriate wooden screw and clean the surface and apply french polish in high glossy finish as per specification.

M/L for removing UNSV long rail from bed hard and S&F new long rail made of Ist class teak wood as per drg and specification.

M/L for removing UNSV head board from bed hard and S&F new head board as per drg and specification.

M/L for removing UNSV foot board from bed hard and S&F new foot board as per drg and specification.

Peg Table (FD-277)

M/L for removing UNSV leg from peg table and S&F new leg made of Ist class teak wood and tightening the frame as per drg and specification.

All as per item No 19.01 above but for long rail.

All as per item No 19.01 above but for short rail.

M/L for removing UNSV top from peg table and S&F new top made out of 18mm thick prelamintaed particle board beaded with 4mm thick teak wood beading and apply french polish as per drg and specification.

Side Board (FD-241)

M/L for removing existing UNSV side board and S & F new teak wood legs of 125 mm height and 45 mm x 45 mm in section up to 45 mm from top, new drawers with 19 mm x 19 mm teak wood bearers and 6 mm thick plywood bottom, new doors with 18 mm pre-laminated particle board, new top with 18 mm prelaminated particle board, back side with 6 mm thick commercial ply wood and clean the surface and apply french polish in high glossy finish as per specification.

Table Dressing Gents with Mirror (FD-379)

M/L for removing UNSV mirror from table dressing gents and repairs the frame and S&F new mirror 5mm of approved make and clean the surface and apply french polish in high glossy finish as per specification.

M/L for removing UNSV knob from table dressing gents and S&F new knob 40mm of best quality and as directed.

Table Dressing Ladies with Mirror (FD-378)

M/L for removing UNSV mirror from table dressing ladies and repairs the frame and S&F new mirror 5mm of approved make and clean the surface and apply french polish in high glossy finish as per specification.

M/L for removing UNSV channel and sliding shutter and S&F new aluminium channel and glass shutter 3mm as per drg and specification.

M/L for removing UNSV knob from table dressing ladies and S&F new knob 40mm of best quality and as directed.

Sofa Sets 5 Seater (FD-281,373)

M/L for removing UNSV foam cushion from sofa set 5 seater and S&F foam cushion 530x500x100mm and 40 density of approved Make: Kurlon/Sleepwell duly upholsterised with tapestry cloth rate not less than Rs 300/- and provide Zip for easy usage and as directed.

M/L for removing UNSV foam cushion from sofa set 4 seater and S&F foam cushion 530x500x100mm and 40 density of approved Make: Kurlon/Sleepwell duly upholsterised with tapestry cloth rate not less than Rs 300/- and provide Zip for easy usage and as directed.

Sofa Sets 5 Seater (FD-373),Removing existing unserviceable/ damaged cushioned seat and back and providing new foam cushion 75mm thick, 530mm x 500mm size and 32 density duly upholterised with best quality tapestry (Rate of tapestry cloth rate not less than Rs 300/- Per mtr) as per drawings and specification and directed by Engr-in-charge.

Chair Dining Long Back (FD-357)

M/L for removing UNSV damged seat of chair dining long back and tightening the frame and repairs the perished seat and back with foam cushion 50mm and upholsterised with cloth tapestry rate not less than Rs 300/- of approved cloth with entire satisfaction and as directed.

Chair dining cushioned seat:-

M/L for remoiving UNSV seat complete and tightening the frame and replace the seat frame, S/F foam cushion 50mm of 32 density duly upholtersied with cloth tapestry of approved quality Note: (Rate of tapestry not less than Rs 300/-) and clean the entire surface and apply french polish in high glossy finish as per specification.

Chair school with writing board:-

M/L for remoiving UNSV seat and witing board and apply one coat of paint black enamel & S/F new seat PVC of approved make and writing board made out of prelamintaed particle board 18/19mm as per drg and specification.

Hat stand with mirror

M/L for remoiving UNSV hooks and S/F new hooks aluminium as drg and specification.

M/L for removing UNSV mirror from hat stand and S/F new mirror 5mm thick of approved make as per existing pattern and clean the surface and apply french polish in high glossy finish as per specification.

Table writing

M/L for removing UNSV top from table writing and S/F new top made of prelaminated particle board 18/19mm and 4mm teak wood beading around the top and clean the entire table surface and apply french polish in high glossy finish as per specification.

M/L for removing UNSV leg from table and S&F new leg made of Ist class teak wood and tightening the frame as per drg and specification.

All as per item No 28.02 above but for long rail.

All as per item No 28.02 above but for short rail.

Table 3x2

M/L for removing UNSV top from table 3x2 and S/F new top made of prelaminated particle board 18/19mm and 4mm teak wood beading around the top as per drg and clean the entire surface and apply french polish in high glossy finish as per specification.

M/L for removing UNSV leg from table and S&F new leg made of Ist class teak wood and tightening the frame as per drg and specification.

All as per item No 29.02 above but for long rail.

All as per item No 29.02 above but for short rail.

Teapoy (W)

M/L for removing UNSV top from Teapoy and S/F new top made of prelaminated particle board 18/19mm and 4mm teak wood beading around the top as per drg and clean the entire surface and apply french polish in high glossy finish as per specification.

M/L for removing UNSV leg from peg table and S&F new leg made of Ist class teak wood and tightening the frame as per drg and specification.

All as per item No 30.02 above but for long rail.

All as per item No 30.02 above but for short rail.

Table centre

M/L for removing UNSV top from Table centre and tightening the frame and S/F new top made of prelaminated particle board 18/19mm and 4mm teak wood beading around the top as per drg and clean the entire surface and apply french polish in high glossy finish as per specification.

M/L for removing UNSV leg from peg table and S&F new leg made of Ist class teak wood and tightening the frame as per drg and specification.

All as per item No 31.02 above but for long rail.

All as per item No 31.02 above but for short rail.

Table dining 1200x900mm

M/L for removing UNSV top from table dining and tightening the frame with necessary corner and S/F new top made of prelaminated particle board 18/19mm and 4mm teak wood beading around the top as per drg and clean the entire surface and apply french polish in high glossy finish as per specification.

Chair dining MAP (FD/MAP-II/05)

M/L for removing UNSV seat PVC from chair dining and tightening the frame and S&F new seat PVC of approved make and clean the entire surface and apply french polish in high glossy finish as per specification.

M & L for clean the surface with emery paper and filling the creaks and bores with putty and apply fench polish in high glossy finish all as specified and directed.

Sofa set 4 Seater

Sofa set 5 Seater

Bed plywood top

Chair Dining

Chair Dining MAP

Chair Writing

Teapoy (W)

Peg Table

Table Dinning 6 Persons

Table Dinning 8 Persons

Table Writing

Table Dressing Gents with Mirror

Table Dressing Ladies with Mirror

Table Centre

Table Bed Side

Chair Easy

Chair dining long back

Chair dining cushioned seat

Side Board

Stool dressing CB

M/s National Traders

SARGAM ENTERPRISES

Yash enterprises

KASTURILAL HARICHAND OHRI AND SONS

SHANMUGA TRADERS