Provn of certain sanction work at Phase 4 of various units under GE S Tezpur

Amount

Surface dressing not exc. 150mm deep and getting out in Soft/Loose Soil, complete all as specified and as directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for sewage pipe line etc. and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading levelling watering and well ramming in layers n,exc 25 cm thick in soft /loose soil for sewage pipe line /manhole and cleaning the site complete all as specified and as directed.

Removing excavated materials n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for RCC type B1 1:1.5 :3 (20mm graded aggregate)as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, underremead piles and mass concrete complete all as specified and as directed.

M&L for RCC 1:1.5 :3 type B-1 using 20mm graded aggregate as columns pillars, piers posts and struts complete all as specified and as directed.

M&L Reinforced cement concrete 1:1.5 :3 type B-1 (20 mm graded stone aggregate) as in lintel, band etc complete all as specified and as directed.

M&L Reinforced cement concrete 1:1.5:3 type B-1 as in slab supported on wall, beam and column in floors, roofs landing, balconies, canopies, deck slab and in shelves and similar works complete all as specified and as directed.

M & L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair complete all as specified and as directed.

M&L Formwork to Soffits of suspend slab such as Roof slab, Floor slab, landings and similar works horizontal or sloping etc., not exceding 200mm thick ,flat rough finished surfaces of concrete, complete all as specified and as directed.

M&L Formwork to Sides of Concrete Founda-tions, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Beam Haunchings, Girders, Bres-Summers, Lintels, Cantilevers, Shelves including supports, overhangs, etc. also splays between floors and beams, etc., flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L Formwork to sides of Pillars, Posts, Struts, Piers, Columns and stanchions, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm complete all as specified and as directed.

M&L for brickwork with sub-class 'B' bricks straight or curved on plan exc. 6m mean radius in half brick work built in cement mortar (1:4) complete all as specified and as directed.

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of bed blocks for hold fast complete all as specified and as directed.

Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc.complete all as specified and as directed.

Refixing of shutters of any description n. exc 1.00 Sqm each in same opening including of taking down, easing, adjusting and refixing/renewal of builders hardware as required including renewal of unserviceable screws, etc.complete all as specified and as directed.

S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification complete all as specified and as directed.

S&F for facrory made Solid PVC door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

Supply and fix, 30 mm thick factory made solid panel PVC shutters (conforming to IS : 4020) consisting of frame made out of mild steel tubes of 19 gauge and size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails. Mild steel frame shall have a coat of steel primer and covered with PVC channel size 30 mm x 50 mm forming stiles and 5 mm thick 75 mm wide PVC sheets for top rail, lock rails, bottom rail on either side and 10 mm thick 20 mm wide cross PVC sheets as gap insert for top rail and bottom rail, panneling of 5 mm thick PVC sheet to be fitted in mild steel frame welded/sealed to the stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading in either side and joint together with solvenet cement adhesive etc an additional 5 mm thick PVC strip of 20 mm width to struck on the interior side of the ‘C’ channel using PVC solvent adhesive including and fitted to PVC door frame complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on both face, supplying & fixing in frame at site With Wood free EPS as per specification & drawing complete all as specified and as directed.

S&F 100mm size type C-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised complete all as specified and as directed.

S&F 150mm long aluminium handle, cast type, anodised complete all as specified and as directed.

S&F extruded aluminium alloy handels fabricated type, anodised, 100mm long complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws complete all as specified and as directed.

S&F Aluminium anodised sliding door bolts of size 200 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F Anodised aluminium frame (Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc.complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane including hacking out old broken glass any, size, quality or description from wooden / metal frame complete all as specified and directed.

S&F 4 mm thick heat absorbing glass clear/tinted of any size of approved quality complete all as specified and directed.

S&F 4 mm thick figured glass, pin head type in square or rectangle not exc 0.50 sqm in each pane complete all as specified and directed.

M&L 12mm thick clear frame less toughened glass including fixing stainless steel brackets, cleats and fixing accessories as per manufacture's instructions complete all as specified and directed.

S&F 12mm thick frosted glass partition including all fittings and accessories complete all as specified and directed by Engr-in-Charge.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) complete and removing rubbish off the premises and depositing good tiles to MES store complete all as specified and directed.

M&L Virified Ceramic tiles of any shade 9 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and and pointed in epoxy joint filler to match the shade of tiles over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Virified Ceramic tiles of any shade 9 to10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm on vertical surfaces such as skirting,Dados,Risers to steps,etc, set and jointed in neat cement slurry and pointed iny and pointed in epoxy joint filler to match shade of tiles over 10mm thick backing layer in cement mortar(1:4) complete all as specified and as directed.

M&L Vitrified Ceramic tiles 9 to 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and y and pointed in epoxy joint filler to match the shade of tiles over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L Vitrified Ceramic tiles 9 to 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in skirting/ Dado etc. set and jointed in neat cement slurry and y and pointed in epoxy joint filler to match the shade of tiles over 10 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L Non skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm screed in Cement mortar 1:3 complete all as specified and as directed.

M/L Granite (of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 over cooking platform complete all as specified and as directed.

M&L 18-20 mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick screed bed in CM 1:4. complete all as specified and as directed.

S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inlet including fixing Bolts with and (excluding 10 litre capacity low level Flushing Cistern) including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed complete all as specified and as directed.

S&F Cascade type (coloured) floor mounted water closet with low level flushing cistern coloured with floor trap, PVC coloured seat cover and connecting pipe etc and making all necessary connections etc complete all as specified and as directed.

Supply and fix, as in repair, vitreous china wash basin, white, oval type size 550 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, with anchor bolts 2 Nos cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

M&L for Vitreous China Half stall type urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all complete all as specified and directed.

M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and fair without using extra cement complete all as specified and directed.

M & L 10mm thick rendering in C.M. (1:6) on brick work finished even and fair without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

M & L 10 mm thick rendering in cement mortar (1:4) on roof surface true to level after applying cement slurry @3Kg/Sqm complete all as specified and directed.

M&L Preparing new Surfaces of Walls and applying Two Coats of Acrylic Emulsion Distemper over a coat of primer and applied over 1mm thick water proof wall care putty by smart painting method including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L Applying one coat of acrylic Acrylic Emulsion Distemper by smart painting method to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by filling the cracks with putty and make smooth surface complete all as specified and directed.

M&L Three coats of white wash including preparation of new plaster surfaces as in ceiling complete all as specefied and directed.

M&L Preparing new plastered surfaces of Walls and applying Two Coats of Exterior Emulsion over a coat of damp shield Primer (as per Manufacturer’s instructions), and applied over 1mm thick water proof wall care putty by smart painting method including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

Supply and fix, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nut of length 450mm complete all as specified and directed.

Supply and fix 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle with 32 mm dia flush pipe including brackets complete all as specified and directed.

Taking up or down Steel Water Tubing 15mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, or removing to store, complete all as specified and as directed.

Taking up or down Steel Water Tubing 20mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use or removing to store, complete all as specified and as directed.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and as directed.

S&F of 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and as directed.

S&F of 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and laid in trenches complete all as specified and as directed.

S&F of 25 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and laid in trenches complete all as specified and as directed.

Supplying and laying of 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or concealed including plain or brass fittings complete all as specified and as directed.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or concealed including plain or brass fittings complete all as specified and as directed.

S&F Pillar Tap 15mm bore, cast copper alloy, Fancy type, chromium plated, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed.

Supply and fix, as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix, 15 mm bore two way bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F 2 in 1 bib tap of 15mm bore cast copper alloy,chromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and Fix Stop Valves, Cast copper alloy, screwed down , high pressure with crutch or butterfly handle , screwed both ends 15 mm bore dia for iron pipe or for unions and fixed complete all as specified and as directed.

S&F Angular Stop Cock 15 mm dia (bore), cast copper alloy, fancy type, chromium plated, screwed down, high pressure,with wall flange screwed for Iron Pipes or Brass Ferrule and fixed, complete all as specified and directed.

S&F in repair 15mm bore dia brass choromium plated single lever 4-in-1 wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs center hole basin mixer without pop-up waste system Single lever complete all as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.20 to 1.50 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F Hand shower 95mm dia round shape multi flow (ABS body chrome plated with gray face plate) with rubit cleaning system including Easy flex tube in chrome finish 1.5Mtr long with nuts complete all as specified and directed.

S&F 150mm dia Stainless steel position with white cement as in repair complete all as specified and directed.

Supply and fix, as in repair, Overhead Shower with arm 200 x 200mm squar Shape Single Flow (Brass Chromium Plated) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

S&F in repair towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws complete all as specified and directed.

S&F in repair Soap dish any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and fix, as in repair, tempered glass corner shelf and wall mounted storage accessories with fitted brackets(10x10 inch) complete all as specified and directed.

S&F in repair brass choromium plated towel rail 600 mm long complete all as specified and directed.

S&F in repair brass choromium plated towel rack with hanger long complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed.

S&F PVC (SWR) Soil, Waste and Ventilating Pipe 75mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed.

S&F PVC (SWR) Bend 110mm bore (dia), any type, equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Bend 75mm bore (dia), any type, equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Junction 100mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Junction 75mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed.

S & F for 100 mm bore of pipe stack clamp out of 50mm x 5 mm flat iron and 16 mm dia round iron stay including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S & F for 75 mm bore of pipe stack clamp out of 50mm x 5 mm flat iron and 16 mm dia round iron stay including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

Dismantling wrought iron or mild steel work or any description as in door, gates, etc and similar works complete all as specified and as directed.

Material & Labour in repair for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels,plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specifed and as directed.

M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

M&L TMT Bars 8 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

M&L TMT Bars 8 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, as in stirrups spacers and binders complete all as specified and as directed.

M&L Hardcore of gauge not exc. 63 mm, broken stone aggregate deposited, spread andlevelled in layers n exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath etc and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.5 mtr and every corner and filled with bituminous filler complete all as specified and as directed.

M&L Sand filling under floors or in founda-tions including watering and consolidation, complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

Material and labour for 75/110 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement complete all as specified and directed.

M&L18-19mm Block board, grade 1 quality, exterior grade, commercial type (Termite treated / water proof) as in cupboard, drawer, kitchen cabinet etc.) complete all as specified and directed.

M & L for Decorative 0.9mm laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive (water resistance) as per manufacturer's instructions complete all as specified and directed. Rate inclusive for pvc taping along edges of block board

M & L for 1mm pvc decorative type laminate of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F Stainless steel zero crank hinges (auto) fancy typewith Mounting Plates & Cover Caps fixed to shutters in cupboards of standard size and shape for modular kitchen complete all as directed by Engr-in-charge. Make:Hettich or equivalent.

S&F 500 mm deep Black Finish Drawer Channel incl of rooler for moving drawer ,precision full extension runner with pull-out stop and roll-out guard,Powder-coated steel, Black complete all as directed by Engr-in-charge. Make:Hettich or equivalent.

S&F Brass handles, cast type,polished bright fancy type,handles fixed with screw,of 125mm size complete all as directed by Engr-in-charge.

Dismantling of water tanks of storage capacity exc 500 ltrs but n exc 1000 ltrs from existing location and removal to store complete all as specified and as directed.

Dismantling of water tanks of storage capacity exc 1000 ltrs but n exc 2000 ltrs from existing location and removal to store complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 2000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 1000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 500 Litre Capacity (Cylin -drical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe complete all as specified and as directed.

S&F Nipple suitable for HDPE water tank. Suitable for 20 mm dia complete all as specified and directed.

S&F Nipple suitable for HDPE water tank. Suitable for 15 mm dia complete all as specified and directed.

Supply & Fixing Gun-metal, Globe or gate Valves, with iron wheel head, screwed both ends for iron pipe and fixed for suitable 20 mm bore complete all as specified and directed.

Supply & Fixing Gun-metal, Globe or gate Valves, with iron wheel head, screwed both ends for iron pipe and fixed for suitable 25 mm bore complete all as specified and directed.

S&F PTMT Ball Valve 20mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed as in repair, complete all as specified and as directed.

Supply and fix for Recessed mounting high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 36 watt LED CDL light, complete all as specified and as directed.

S & F in repair 18 Watt LED fitting Recess/Surface mounted downlighter (Round/Square) with independent electronic LED driver ensuring glare free light with all its surface module accessories downlighter including taking down unsv light fittings comlpete all as specified and directed. make-Havells and Equivalent CG/Bajaj/Usha/Jaquar/Philips.

S&F 12 Watt LED fitting Recessed mounted downlighter (Round/Square) with independent electronic LED driver ensuring glare free light with all its surface module accessories including taking down unsv light fittings comlpete all as specified and directed.

Taking down old burnt/unserviceable submain wiring with aluminum/copper conductor PVC insulated cable of any size drawn through PVC casing caping/ PVC Conduit pipe including GI wire accessories etc. and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 10.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 10.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 20 mm dia including all fittings including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required (as per the existing condition), complete all as specified and as directed. Note:- Two runs of 10 Sqmm conductor as main wire and one run of 10 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.

M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 4.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 20 mm dia including all fittings including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required (as per the existing condition), complete all as specified and as directed. Note:- Two runs of 4 Sqmm conductor as main wire and one run of 4 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.

S & F in replacement 8W LED outdoor new generation landscape lighting fitting Bamboo type with 1mtr length IP 65/66 protection including base to stand alone complete all as specified and directed. Make :- Havells Cat Part : BAMBOOBLS8WLED830PSYMTOPC /Crompton/ Wipro/Philips

S & F 35 W LED outdoor New generation, LED post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminum landscape luminaries with high power LEDs as light source with IP 65/66 , IK-07 protection complete all as specified and directed. Make-Havells, Cat No-ENDURASPRING6PT35WLED757PSYMTOTG / Phillips/Crompton/Wipro

Supply and fix in replacement of waterproof adjustable LED fountain light 9 W, 12 V, aluminium body complete with all accessories internally pre-wired and including connecting up with copper conductor cable with suitable size complete all as specified and directed.

Supply and fix in replacement of LED Driver/adopter suitable for fountain light min 12V-200 W rainproof supply AC-DC complete with all accessories internally pre-wired and including connecting with copper conductor cable with suitable size complete all as specified and directed.

Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 4 core complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable of 10 sqmm dia PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular complete all as specified and directed.

S & F in repair PVC Conduit pipe of 25 mm complete all as specified and directed.

M&L for 80 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

M&L Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan /call bell point/ Switch socket outlet 5 amps complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board..

S&F Switch piano flush button single pole 5 Amps 230 volt one way complete all as specified and directed.

S&F ceiling Rose, surface bakelite 65X35mm, three terminals complete all as specified and directed.

Supply and fixing of Single pole and neutral enclosure with a two pin and earth plug and socket complete with double pole MCB of 20-32 amps complete all as specified and directed.

M&L for pvc exhaust fan of size 200 mm sweep, single phase,230volts Ac with louver shutter /grill and connection complete incl cutting hole and making good disturbed surface and necessary fixing arrangements complete all as specified and directed by Engr-in Charge.

M&L for pvc exhaust fan of size 250 mm sweep, single phase,230volts Ac with louver shutter /grill and connection complete incl cutting hole and making good disturbed surface and necessary fixing arrangements complete all as specified and directed by Engr-in Charge.

S & F Exhaust Fan of Size 300 mm sweep, 230Volts AC, Metal Body with louver shutter /grill connection from existing ceiling rose incl cutting hole and making good disturbed surface and necessary fixing arrangements complete all as specified and directed by Engr-in Charge.

S & F Heavy duty Exhaust Fan of Size 450 mm sweep, 1400 RPM, 230Volts AC, Metal Body with connection from existing ceiling rose incl cutting hole and making good disturbed surface and necessary fixing arrangements complete all as specified and directed by Engr-in Charge.

Supply & Fix electric storage heater of 25 Ltr capacity, 5 Star in replacement with heating element 2000 W, thermostat, inlet, outlet connection pipe and air vent connections including all fixing arrangement for mounting on wall and necessary water inlet and outlet connections complete all as specified and directed.

S&F sheet metal enclosure with socket plug top and MCB's SPN enclosure with 2 pin and earth plug and socket complete with one single pole MCB 20 Amps , 240 Volt complete all as specified and directed.

Taking down carefully unserviceable point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulatos, socket etc and making good disturbed surface of wall/floor etc complete all as specified and directed.

Taking down DB/main switch including MCB SP/DP/TPN of any size and making good disturbed surface of wall/floor complete all as specified and directed.

M&L for concealed point wiring for one Light/ Fan/ Bell point complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20 mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, with and including modular metal flush box and Modular white Cover Plate with Frame for fixing modular switches, sockets fan regulators etc duly earthed. Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles complete all as specified and as directed. Note- (i)The cost of Blanking plate if required shall deemed to be included in the unit price. (ii) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (iii) Cutting pinning and chases shall deemed to be included in the quoted rate.

All as per Ser item No. 154 above but for 5 amps socket on same board with other switches

All as per Ser item No.154 above but for 5 amps socket on independent board.

All as per Ser item No.154 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

S&F Modular type switch 6 Amps 230V AC single module one way complete all as specified and as directed.

S & F of Modular Socket, 6A - 5 pin combined 230V AC 2 module one way complete all as specified and as directed.

S & F of Modular switch 1 way 16A, 230V AC single module one way complete all as specified and as directed.

S & F of Modular Socket 6A/16A - 5 pin combined 230V AC 2 module one way complete all as specified and as directed.

S&F wall mounted LED batten 20W 4ft with polycarbonate housing & integrated electronic driverwith LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length complete all as specified and as directed.

S&F wall mounted LED batten 9W 2ft with polycarbonate housing & integrated electronic driverwith LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length complete all as specified and as directed.

S&F Sheet metal double door enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete including connection complete all as specified and as directed.

S&F Sheet metal double door enclosure for DB's when MCBs to be used 12 way single pole and neutral double door with 200 amps rated bus bar complete including connection complete all as specified and as directed.

Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral and current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioning.complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing of LED Bldg Security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with GI Pipe 40 mm dia bracket made out 120 degree in shape with 2 Nos GI strip clamps, nut bolts and washers complete all as specified and as directed.

S&F wall mounted fan AC single phase 240 V of size 400 mm sweep(SSTORM 2), metal body and blade, powder coated metalic finishes heavy duty motor, complete all as directed and specifed. Make cat no. TORPEDO (HS) 2100RPM

M & L Earthing complete with GI earth plate electrode 60cmX60cmX6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth wire 4mm dia as earthing conductor by means of bolts, nuts, check nuts and washers of GI and all as shown in Electrical plate No.3 of SSR Part I and including testing on completion all as specified locations and as directed by the Engineer-in-Charge. Note: 1.The above quoted rate shall include cost of main earthing wire 4mm dia charcoal, salt, excavation and earth work in any type of soil CI cover, funnel with 20mm dia light grade GI water pipe including GI protection pipe 15mm dia light grade for earth strip etc. 2. The cost of earth pit is deemed to be included in the unit rate. 3. The cost of taking down old unsv earthing with all its accessories is deemed to be included in the unit price.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

Supply, lay and fix in replacement of 40 mm bore galvanized iron water tubing low grade including all fittings and fixed/ laid in trenches or on poles complete all as specified and directed.

S&F 16 Sqmm Twin core 1100 Volts grade heavy duty cable PVC insulated multi stranded aluminium conductor served with inner seathing of PVC tape and over all PVC seathed for service conection complete all as specified and directed.

Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

M/S SINGH FURNITURE MART (BID ID -3258317)

AVASANA SOLUTIONS PRIVATE LIMITED (BID ID -3267225)

M/S MOHANPASARI (BID ID -3261953)

Chinmay Traders (BID ID -3262499)