PROVN OF KOTA STONE FLOORING AND ALLIED WORK AT JODHPUR SAINIK INSTITUTE (JSI) AND OTHER SANCTION WORK UNDER GE (ARMY) NO.1 JODHPUR

Amount

Surface dressing not exc. 15 cm deep getting out in any type of soil, complete all as specified and directed.

M&L Hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc., complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate), as in base course, to receive floor finishes, complete all as specified & directed.

M&L for machine cut kota stone slab 20 to 25mm thick in floor laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:4 including dismantling of stone slabs of any description complete all as specified and as directed.

All as per item No. 5.00 here-in-above, but as in skirting/dado with 10mm thick backing coat in CM 1:3

S&F rotational moulded polythene water storage tanks of 1000 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, complete all as specified and directed.

S&F 25 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete complete all as specified and directed.

S&F 20 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete complete all as specified and directed.

S&F 75mm bore PVC (SWR) single socketed in any length with rubber ring joints laid in trench or floor complete all as specified and directed

M&L for 20 mm thick (telephone black shade) granite stone, as in plateform, windown cill, WHB counter top, machine cut, (table rubbed and polished) best quality as per sample, including & over 20 mm thick screeding in CM1:3 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.

S & F vitreous china ware wash hand basin, white, flat back of size 300 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long complete all as specified and as directed.

M&L for Jodhpur stone roof slabs self faced 7.5cm to 10cm thick, 25cm to 35cm wide ,hoisted and set jointed and grouted in cm 1:3, complete all as specified and directed

S & F in replacement 15 mm bore pillar taps, brass, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F angular stop valves, chromium plated, brass (ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union, complete all as specified and as directed.

S&F of water GI tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid n floors, complete all as specified and as directed. (a) 25 mm bore,

All as per item No 16.00 here-in-above, but size of pipe 20 mm bore.

All as per item No 16.00 here-in-above, but size of pipe 15 mm bore including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.

M&L precast cement concrete block masonry using PCC 1:2:4, type B-1 solid blocks, 10 cm in width and setting in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed.

M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with water proofing compound as per manufacturer instructions and finished the surfaces even and smooth with out using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.

M&L preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash as primer, complete all as specified & directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

M&L for non-skid colour ceramic tiles joint less (400 × 400 mm) 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm over & including M&L 15mm thick CM 1:4 screed or bedding layer mortar , for laying floor finishes in floors complete all as specified and directed.

M&L for glazed colour ceramic tiles (premium quality) of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:3) complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls or ceiling surfaces, etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed.

M&L for 5 mm thick Rendering in CM 1:3 on fair faces of brick work or conc surfaces as in ceilings/chajja/facia & finished even & smooth w/o using extra cement, complete all as specified and as directed.

M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.

M&L for Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash on wall surfaces complete all as specified and as directed.

Racking out joints/ pointing to squared rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed.

M&L keyed pointing in cement mortar (1:3) to squared rubble masonry regular coursed or un coursed complete all as specified & directed.

S & F in replacement white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and PVC 'P' or 'S' trap, including M&L brackets, flush HDPE pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts & fixing arrangement of cistern, complete all as specified and as directed.

S & F as in repairs vitreous china wash down water closet European Type pedestal pattern with seat & cover as in repairs with jet spray complete incl fixing of flush pipe etc complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed.

S & F Vitreous China Urinal, Half stall type,white with Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) including PVC connection , bottle trap 32mm complete all as specified and directed by Engineer-in-charge.

S & F Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed by Engineer-in-charge.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.

S& F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

S/F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, all as specified.

S&F of solid PVC door frame of single side prelaminated size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F 15mm bore chromium plated bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union suitable for 15mm bore pipe etc; complete all as specified.

S&F CP towel rail 600 mm long fixed with and including CP brass screws and wooden/ plastic cleats complete all as specified.

S&F in repair Soap dish, cromium plated , any type, fixed to plugs with chromium plated brass screws all as specified and directed.

S &F Anodised Aluminium handles 150 mm size fabricated type complete all as spd & directed.

S & F for Aluminium anodised,barrel tower bolts of 150mm size & fixed complete all as specified

S&F stainless steel butt hinge of size 100mm, complete all as specified and as directed.

S&F 5 - 6 mm thick bevelled edges high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers etc complete all as specified and as directed

S&F in replacement two way angle bib cock cromium plated fancy type 15 mm bore /size, complete all as specified and as directed

Disconnecting existing tanks setting aside [or lowering if required] for repair,cleaning etc., and hoisting if required reconnecting and refixing in position of water tanks of capacity exceeding250 litres and not exceeding 500 litres complete all as specified and as directed.

Disconnecting existing tanks setting aside [or lowering if required] for repair,cleaning etc., and hoisting if required reconnecting and refixing in position of water tanks of capacity exceeding 500 litres and not exceeding 1000 litres complete all as specified and as directed.

Dismantling existing tanks of any description n exc 500 ltrs capacity and removing from site or credit to contractor, complete all as specified and as directed.

Dismantling existing tanks of any description n exc 1000 ltrs capacity and removing from site or credit to contractor, complete all as specified and as directed.

S&F rotational moulded polythene water storage tanks of 500 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, complete all as specified and directed.

M&L for carrying out water proofing treatment for sunken portion in the following stages - (i) Taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish of the pemises , cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00kg/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (ii) M&L for two coat of acrylic cementitious water proofing coating (Dr FIXITpidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer's instructions) on top surfaces of sunken slab after preprations as mentioned above. Method of application for acrylic cementitious water proofing coating achieved as per manufacturers instruction complete all as specified and directed.

Supply only water proofing compound, complete all as specified.

M&L for PCC (1:5:10) lean cement concrete type E2 using 40 mm graded stone aggregate in mass concrete after carrying out satisfactory testing of CI pipe/ PVC pipe joints and slab /wall by filling water for 72 hours, complete all as specified and directed. Note:- Nahani/ floor trap and pipe joints shall be embedded in PCC 1:3:6 type C1 complete.

Taking down steel windows/ vents & remove from site complete all as specified.

Taking up or down 25mm bore CPVC/steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

All as per item No. 61.00 here-in-above, but size 20 mm bore

All as per item No. 61.00 here-in-above, but size 15 mm bore

Refixing old GI water tubing of 25 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

All as per item No. 64.00 here-in-above, but size 20 mm bore

All as per item No. 64.00 here-in-above, but size 15 mm bore

S&F PVC connections 15mm size with PTMT nuts of length 450mm all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm all as specified and directed.

S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 110mm bore PVC (SWR) single socketed in any length with rubber ring joints laid in trench or floor complete all as specified and directed

S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F 110 mm bore PVC [SWR] branch piece, single [single "Y"] equal or unequal complete all as specified and as directed.

S&F 110 mm bore (SWR) PVC bends any radius complete all as specified and as directed.

S&F 75 mm bore (SWR) PVC bends with oval acess door, complete all as specified and as directed.

S&F PVC SWR vent cowl 110mm, complete all as specified and as directed.

S&F PVC SWR vent cowl 75mm, complete all as specified and as directed.

S& F in repairs 75mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and as directed..

M&L 75mm Cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with cp grainting complete all as specified and as directed

M&L 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including cp grating complete all as specified and as directed

S&F CP Brass health foucet with 1200 mm long flexible mild steel tube 80 mm dia with wall hook complete all as specified and directed.

M&L for fabrication of aluminium powder coated ventilators (with louvered) fabricated with anodized aluminium rectangular section in frame & with deco grill of approved design & stainless steel wire cloth on the outer side of frame & trade pattern louvers with suitable mechanism for tilting /opening closing etc all as per sample approved by GE & fixed in position complete all as directed. (Note : Glass pane in louvers & stainless steel wire cloth shall be measured & paid separately)

S & F 4 mm thick pin headed figured glass in small widths as in louvers of ventilators complete all as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to anodised aluminium frame work of windows / ventilators with stainless steel wire staples complete all as specified and directed.

M&L for precast RCC 1:2:4 Type B 1 using 20mm graded stone aggregate as in manhole/drain cover with hole/without hole hoisted & laying in position as directed.

M&L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for 150 mm dia pipe complete all as specified and directed.

Supply & laying jointing and testing 150mm bore reinfirced conctete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement complete all as specified and directed.

Cutting into existing manholes for connecting 150 mm new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required.

M&L for modular point wiring complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable (RYBN) 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FRLS cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of modular switches, sockets, fan regulators suitable for One light /fanpoint controlled by one, one way switch, complete all as per specified and directed.

All as per item No 88.00 here-in-above, but suitable for one socket outlet 3 pin 5 or 6 Amps socket outlet on independent board.

All as per item No 88.00 here-in-above, but suitable for one socket outlet 3 pin 5 or 6 Amps socket outlet on same board.

All as per item No 88.00 here-in-above, but with 4 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board

S&F modular switch 1 way 6 Amp, 1 module complete all as specified and directed.

S&F modular socket 6 Amp, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular switch 1 way 16 Amp, 1 module complete all as specified and directed.

S&F modular socket 6 Amp/16 Amp, 6 pin combined 2 module complete all as specified and directed.

S&F Ceiling rose, three terminals, bakelite body, 230 volts, complete all as specified and directed.

S&F electric storage water heater of capacity 25 litres BEE 5 star rated including proper installing arrangment on wall surface with suitable Anchor bolt fastener and Geyser connections for hot and cold water supply, including M&L stainless steel wire braided of size 15mm size with 450 mm length connector with chrome finish heavy duty nuts etc complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including AC decorative box type with driver, holder including,copper conductor cable of suitable size from ceiling rose complete complete, 4 ft long all as specified and directed.

S&F bldg security LED Light Luminaire of 35 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 40 mm bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable complete all as directed.

S&F Vertical Distribution Board, double Door, suitable for 'A' Frame FP MCCB 100A made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 6 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s and MCCB etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. Note : MCCB & MCB will be measured and paid separately under respective items

S&F MCCB, A Frame, thermal adjustable magnectic setting, Ics = 75% 16 kA, 415V, 100 Amp, 4 Pole MCCB with over load and short circuit protection, complete all as directed.

S&F MCB, B Curve type, 10 kA, 63Amp, SPN with over load and short circuit protection, complete all as directed.

S&F MCB, B Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed.

M&L for sub main wiring with 2 runs of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 25 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. Note:- Two run of 6 Sq.mm. and one run of 6 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces.

M&L for sub main wiring with 4 run of 10 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 25 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note:- Four run of 10 Sq.mm. and one run of 10 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces.

S&F of Heavy duty Exhaust fan 300 mm sweep, steel body, 900 RPM, including louvers with cutting chases on brick wall and grounting with nut bolts, complete all as specified and directed.

Supply and fix air cooled split unit air conditioner electric driven, single phase of capacity of 2 TR, BEE 3 star rated 2 ton, Split Air Conditioner Nominal Capacity : 2 ton Cooling capacity : 6.0 KW ± 2% Electricity input : 230V/50Hz/Single Phase Coefficient of performance : 3.5 (Minimum) Max. Ambient temperature : 480 C ± 5% Moisture removal rate : 2 ± 10% litre/ hour Air flow rate : 5.6 cmm (Minimum) Noise level Indoor unit : Less than 45 db Outdoor unit : Less than 55 db Function modes : Auto/Cool/Fan/Dry – shall have sleep and power saving modes Other features : - Automated vertical swing for horizontal louvers - Antifreeze thermostat Compressor : Rotary type Body surface finish : powder coated/high quality paint finish Air filtering unit : Activated carbon cartridge, dust proof and anti?bacteria filter Length of tubings : 05 m or as per the installation requirement Remote handset : LCD display with night glow

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 90 V to 300 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA, complete all as specified and directed.

Supply, installation, commis-sioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity of 40/80 Ltrs, complete all as specified and directed.

Supply install & testing OPEC DHC 90 BLK (IS) - Island / Elect Chimney, Matte Black Finish, Heavy duty Buffle Filterr, Auto Clean Technology, having BLDC Motor with powerful air flow, 8 mm thick light dark tempered curvrd Glass, heavy duty baffle filter, maximaum airflow (upto) 1200 Nm3/h, Noise level : 59 dBA(maximum), size 90 cm complete with suitable size of duct as per site requirement, complete all as specified and directed.

Supplying and fixing smart three phase four wire dual source prepaid energy meters BIS 15884 marked in existing meter board / florr panels with pre payment capacity touch keypad based digital having current range 10-60 Amp 415 Volt accuracy class 1.0 alongwith parallel home display split unit with inbuilt load control switch obntaining provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI, dual source registration wrt grid as well as DG supply and dynamic load allocation facility from grid and DG, capable to define for tariff slabs, happy hours and holiday definition, complete all as specified and directed.

M&l for Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, nnected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 5 connected to Earthing test point all as ecified or indicated including testing on completion( Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover & GI 15 mm dia protection pipe upto 7.5 mtr. lead etc. complete )

S&F single pole and neutral enclosure with two pin and earth plug socket complete with one single pole MCB 20 Amp ‘C’ curve type, 230 volts, 10 KA , complete all as specified and directed.

S&F Chromium plated brass bib tap fancy type of size 15 mm , ISI Marked, complete all as specified and directed.

Supply, installation, commis-sioning of Metal Top Deep Freezer single phase 240 volt, 50 Hz of Capacity - 405 to 425 Ltrs (Capacity must be more than 405 ltrs), complete all as specified and directed.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.

Taking down carefully UNSV submain wiring of any size and all as directed.

M & L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and make good the distrubed surfaces ) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, all as specified, directed and shown on drgs for The rates of chase cutting on wall done concealed conduit and steel terminal boxes are included in the unit rates, suitable for One light/fan/bell point controlled by one, one way switch complete all as specified and directed.

All as per item No 119.00 here-in-above, but suitable for one socket outlet 3 pin 5 or 6 Amps socket outlet on independent board.

All as per item No 119.00 here-in-above, but suitable for one socket outlet 3 pin 5 or 6 Amps socket outlet on same board.

All as per item No 119.00 here-in-above, but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F Socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed.

S&F Switch piano type, single pole, one way, 15/16 amps, 230 volts, complete all as specified and directed.

S&F Socket, 6 pin, 5/16 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed.

S&F switch piano flush type single pole one way 6 Amp ISI Marked.

S&F Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed.

S&F LED lamp 9 W complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing as MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall incl dismantling of old UNSV DB all as specified and directed by the Engr-in-Charge.

S&F replacement sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door IP-43 DB's suitable for one No 100 Amp 10 KA TPN MCCB as incoming complete incl dismentaling of unserviceable DB, complete all as specified and directed.

Supply and fixing in replacement MCB TPN C Curve 63 Amps Make incl dismantling of old unserviceable TPN MCB, complete all as specified and directed.

M&L for sub main wiring with five runs of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 25 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note:- Five runs of 6 Sq.mm. and one run of 6 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces.

Note:- (i)- Qty's have been clubbed from 2 Nos sanction Job's, whose details as per appx (ii)- Qty's of BOQ Item No. 23.00 to 87.00 and item No. 117.00 to 133.00 are only consider in Job No. 15 / SR (BLDG) / JODH/ 2024-25 NOTE:- (i)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

SNEH CORPORATION (BID ID -3148766)

M/S KARNINCONSTRUCTION COMPANY (BID ID -3147284)

RISING ELECTRICALS (BID ID -3148944)

Nikhat nirman (BID ID -3142938)