CA NO. CWE BLY / GE(W) /47 OF 2022-2023 SPL REPAIR TO BLDG NO T-28 / F OLD FORT ROAD OF FD HOSP AND AUGMENTATION OF PARKING INFRA NEAR BLDG NO P-159 UNDER GE(W) BAREILLY

Amount

Dismantling of asbestos cement sheet (corrugated, semi corrugated etc) in roof covering complete all as specified and directed.

S & F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws/L-type or J-type or cranked hook bolts etc complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position framed sections (roof trusses) complete all as specified and directed

M&L for Dismantling framed trusses n exc 10m span complete all as specified and directed

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde E-250) Quality -B complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, channel or hollow rectangular/square sections) including distance pieces, cleats etc according to Fe-410-W(Gde E-250) Quality -A complete all as specified and directed.

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in CM 1:4 complete all as specified and directed.

S & F Steel windows or ventilators fixed type with glazing bars complete all as specified and directed.

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed.

S & F 125 mm X 60 x 2 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. Note : 10mm deformed bar shall be provided in bottom portion in each frame. The rate for the same is included in rate quoted against this item.

S&F105x60mmx2mm thick pressed steel, frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc, complete all as specified and directed.

S & F factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F for 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, bolt or clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

M&L for 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 140 mm floor door stopper of aluminium alloy body and tongue , anodised ,with hard drawn steel spring ,fixed in floor complete all as specified and directed

M & L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Stainless steel Curtain Rod 32 mm dia of approved quality with two number decorative design as approved brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod complete all as specified and directed

S&F of steel windows with pressed steel frame (size 95x45x1.25mm) side hung shutter including box type hinges with steel handle, and steel peg stay complete with glazed openable shutter with glazing bar(open out side) and wire gauged openable shutter without glazing bar(open inside), dovetailed or welded complete all as specified and directed and all as per Drg No TD/088 dt 07 Jan 2002 NOTE :- (i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling of PCC in frame deemed to be included in quoted rate. (iii) MS grill shall be measured and paid separatly under relevant item of schedule

S&F framed work such as grills, gratings, steel post and struts in fencing incl drilling holes, notching for wire etc, including straining bolts, holdfasts, wall ties, clamps, angle iron etc with end bars shouldered or riveted or forged into spikes, framed gaurd bars, railing frame work and similar confirming to Fe-410-O complete all as specified and directed.

M&L for painting to steel surfaces of any description exc 10 cm width or girth with two coats of synthetic enamel paint over a coat of red oxide including preparation of new or previously untreated surfaces complete all as specified and directed.

S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

S& F galvanised stainless steel wire clothes 0.36 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

M & L for Plain Cement Concrete 1:3:6 type C-1 as in bed blocks for hold fast and similar work etc complete all as specified and directed.

M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 including demolition of existing reinforced cover complete all as specified and directed.

Demolition of brickwork built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brickwork with flyash bricks, straight or curved on plan exc 6m mean radius built in 1:6 cement mortar complete all as specified and directed.

M&L for rendering 15mm thick on brick wall or concrete surfaces in cement mortar (1:4) finished the surface even and smooth without using extra cement complete including Taking down cement /new plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick on brick wall or concrete surfaces in cement mortar (1:6) finished the surface even and smooth without using extra cement complete including Taking down cement mortar plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed..

M&L for preparing newly plastered surfaces of walls and applying two coat of cement base paint on walls complete all as specified and directed.

M&L for preparing Old plastered surfaces of walls and applying one coat of cement base paint on walls including complete removing of existing treatement complete all as specified and directed.

M&L for preparing Old plastered surfaces of walls and applying one coat of OBD on walls including complete removing of existing treatement complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying one coat of OBD on walls complete all as specified and directed.

M&L for applying 2 mm thick layer of ( Birla / JK) wall care putty on wall/ceiling surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as specified and directed.

S & F in repairs 4mm thick E-Board tiles (Everest or equivalent) for insulation and acoustic purpose of size 600x 600mm fixed with and including GI snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 2mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed.

M&L, for 20-25 mm thick machine cut kota stone slab flooring with mirror polished set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed in cement mortar 1:4 ,rubbing , polishing complete inclu Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L machine cut Kota stone slab 18 to 20mm thick with mirror polished in riser of steps skirting, dado and pillar,landing in single piece with round nosing with three numbers of serration, laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed dismantling of wall tile including cement mortar bedding complete all as specified and directed.

Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed complete all as specified and directed.

S&F 20 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like etc complete all as specified and directed

Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C-2 ( using 40 mm graded stone agg) as in plinth protection finishing cement concrete even and smooth without using extra cement. Including 75 mm wide and 3 mm thick glass dividing strip inserted in position at every one meter and change of direction including Demolition of cement concrete (un reinforced) in ground floor or pavings of any description n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete ( reinforced) in roofs , floors (other than ground floors) beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M & L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified and directed.

M & L formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT Bars 6 to 8mm dia, cut to length, bent to shape, required including cranking bending spirally for hooking ends etc and binding with MS Wire( annealed) not less thn 0.90mm dia complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F mild steel deformed or twisted bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia.

M&L RCC 1:2:4 type B1 using 20 mm graded stone aggregate as as in chajjas and like all as specified and directed.

M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves and stair case etc complete all as specified and directed.

S&F in repair vitreous china wash down water closet (one piece EWC with soft close seat cover and twin flush fitting) size 650 x365x765mm including connection to drain pipe etc complete all as specified and directed. Make : Cera Cat No 51013105, S-TRAP-300mm, Hindware-Cat No 92551 (S-22) size 70x38x730mm, Jaquar-KUS-WHT-358515300UF.

S&F in repairs 10 ltrs PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed.

Cutting chases for GI consealed water tubing and making good with cement sand mortar 1:3 cutting n exc 10cm girth complete all as specified and directed.

S&F in repair bib taps 15mm bore CP fency long body Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed and fixed complete all as specified and directed.

S&F in repair 15mm bore Fency type CP brass Stop valves, cast copper alloy,screwed down, high pressure,with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixeds complete all as specified and directed.

S&F in repair 15mm bore Fency type CP brass angle valves, cast copper alloy,screwed down, high pressure,with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixeds complete all as specified and directed.

S&F in repair 15mm bore Fency type CP brass concealed Stop valves, cast copper alloy,screwed down, high pressure,with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.Model : WHB - Cat No 10072, Pedestal- Cat No. Ped 11029 Neptune of Hindware ,Parryware Cat No C0480 (SP) 181/CTH ,C 0375 pedestral, Cera Cat No 2090107Ped , Cat No S 2040112 WHB

S&F PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified and directed.

S&F 32mm bore Low density polyethylene (LDPE) (corrugated Waste pipe) pipes of pressure rating 6 kgf/sq. cm complete all as specified and directed.

S&F in repair 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified and directed.

M&L taking up or down 15mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed.

M&L taking up or down for 20mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed.

S&F 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and directed.

S&F 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and directed.

Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and directed.

Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and directed.

Taking up or down existing asbestos cement pressure pipe any class any dia ,(including all fitting ) including disconnecting pipes and fittings complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F75 mm bore. PVC(SWR) junction single (single T) equal or unequal with access door complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 75 mm bore. PVC (SWR) bends complete all as specified and directed.

S&F 75 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends with oval access door complete all as specified and directed.

S&F 110 mm PVC (SWR) bend any radius complete all as specified and directed.

S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door complete all as specified and directed.

S&F in repair grating doom 100 mm dia of PTMT (Min wt 25 gms) complete all as specified and directed.

S&F in repair towel rail 20mm dia D type cast copper alloy, chromium plated 600mm long with bracket in repair complete all as specified and directed..

S&F in repair Brass chromium plated shower rose 125mm size fixing with 15mm pipe fixed complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F 110 mm PVC (SWR) bend any radius complete all as specified and directed.

S&F 80 mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof complete all as specified and directed.

S&F Stack clamps out of 50 x 5 mm flat iron and 16 mm dia round iron stays for 100mm bore pipes, incl bolts and nuts and securing ends of stays to walls or roof complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone agg laid in panel finished even & smooth with using extra cement as in flooring complete all as specified and directed.

Surface excavation n exc 30 cm and averaging 15 cm and getting out in any type of soil complete all as specified and directed.

Removing excavated material n exc 50m and deposited where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L hard core of gauge exc 63mm but not exc 100 mm deposited ,spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface broken brick/ stone or boulders complete all as specified and directed.

M&L hard core of gauge exc 63mm but not exc 100 mm deposited ,spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface stone or boulders complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggragate as in plinth protection finishing cement concrete even amd smooth without ung extra cement complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 using 40 mm stone aggragate as in sub base as in foundation filling and mass concrete bed block complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D 2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and directed.

M&L80 mm thickness machine pressed precast interlocking paver block any shape and size conforming to IS - 15658-2006 of M-40 grade with grey cement and pigment over and including 25mm thick sand cushioning watering and consolidation complete all as specified and directed.Make NTC Tiles, LLP, Panchkula Haryana, NITCO Tiles, Najafgarh, New Delhi, Mehtab Tiles, Indore

M&L for Sand for plastering or pointing or laid for paver complete all as specified and directed.

S & F for 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and Dismantling water tanks and with float valve and Tank nipple complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as specified of drawing.

M&L in providing 30 mm thick factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2 nOs PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws etc complete as per direction of engineer-in-charge, manufacturers specification and drawing

S&F, 200 mm long aluminium anodised barrel barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100 mm stainless steel but hinges medium wt steel hinge pin, bright polished complete all as specified and directed.

S&F, 125 mm aluminium handles cast type, anodised complete all as specified and directed.

S&F Vitrified Ceramic tiles dark Shade/Double charged/ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to including match incl dismantling of tiles and demolition of concrete base n. exc 40mm thick shade of the tile and including M&L 20mm thick cement screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per Item No 102 above but in skirting including dismanting of tiles over and including 10mm thick rendering in cement mortar in 1:4 complete all as specified and directed.

S&F for 0.71mm thick Aluminium plain sheeting Alloy 31000 H4, in stepped flashing STUCCO Embossed finish with fixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart incl dismantled also complete all as specified and directed.

S & F stainless steel plate rack not less than 5 Kg of size in repair complete all as specified and dirrected (Model : KPR -315 of M/S Blue Star or equivalent make- of M/S Jain Brothers sanitation Pvt Ltd Brand -Jayna)

S & F in repair chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union size 125 mm complete all as specified and directed. Model No: F 7010305 of Cera , Hindware Model No F160006 , Parryware Model No T9985 A1 all as specified or as directed.

S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.

S&F in repairs PVC toilet cabinet with mirror of size 20"X16" of selecred quality complete as specified and directed .

S&F in repairs 75 mm x 32 mm dia chromium plated waste fitting special size suitable for stainless steel sinks including PVC flexible waste pipe of approved quality complete all as specified and directed.

S&F in repair of PVC corner set of three of size (12'X12" ,9"X9" and 6" X6" ) with railling and complete all as specified and directed.

S&F Anodised aluminium frame for doors windows, ventilators and kitchen cupboards frame with one or more rebates including joining cleat for fixing etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F in ALCO panel 3 mm sheet/board of any colour or shade complete all as specified and directed.

M&L Peg set of six Aluminium alloy body complete all as specifed and directed.

M&L for 12 mm thick decorative plywood, grade 1 (with BWP resin) with decorative face one side veneers on the faces fixed with screws to timber frame work complete all as specified and directed.

M & L for French polishing two or more coats on new wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old work complete all as specified and directed.

M&L for 3mm thick Veneered decorative ply wood, grade I (with BWR resin) decorative veneers on one faces complete all as specified and directed.

S&F for 1mm thick sunmica coloured fixed with adhesive and nails complete all as specified and directed.

S&F for toughend and Glass 10mm thick single piece with 1mm thick coloured or plain lamination, moulding fixed with all necessary items with fency type handles and double action hinge autoclosed after Push and Pull, finished for doors complete all as specified and directed.

M&L in reapir for POP false ceiling including GI framing, main member C shaped spacing not exc 1m c/c having weight 300 to 350 gm per RM and cross member U shaped spacing n. exc 500 mm c/c having weight 250 to 300 gm/ RM and C section fixed on parameter wall with screws and rawl plug including hanging arrangements to RCC slab with L shape member exc 1.5 m (weight not less than 120 gm/RM) and wire mesh of dia 0.50 to 0.56 mm weight not less than 350 gm/sqm fixed with steel screws of GI framing and applying two coat of luxury emulsion (Royal) including dismantling of old false ceiling complete all as specified and directed.

Excavation in post holes or similar holes each n.exc. 0.50. cum, getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc 50m and making good surfaces complete all as specified and directed.

S&F for compound girders and stanchions, lattice girders, areial mast, staging for water tank and incl caps, base slices etc, builtup from two or more beam or channel section/100mm dia steel tube medium class (FE-410W Gde E-250) using as column complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) for strone courses, facing courses, parapets and rolling upto 60 cm height, coping, kneelers and the like including weathering, slighty roundered or chamfered angles and throating all as specified and directed.

M&L for PCC kerb stone outer coloured surface machine pressed factory made of size 300m long, 150 mm thick and 350 mm in deep as in PCC 1:2:4 type B-1 (using 20mm graded aggregate) including form work weathering, slightly roounded or chamfered angles and throating complete all as specified and directed.

M&L for adequate nos of coats of painting lines on intrerlocking paver block, dashes, arrows etc on roads, pavements and like exc 10 cm wide road marking paint , white or golden yellow complete all as specified and directed.

E&M Part: Taking down carefully copper/aluminium point wiring light, fan, socket or power point complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings, bell push, bell buzzer etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M & L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes , its accessorie & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sctional area) single core PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valid CML number as continuity earth wire terminating with new sunken concealed terminal boxs complete all as specified and as directed for one light/fan/bell/exhaust fan point controlled by one switch/bell push

All as per item No. 129 above but one 3 Pin, 5 Amps, switch socket outlet point controlled by one switch on independent board

All as per item No 129 here-in-before but 5 Amps socket outlet point controlled by one switch on same board.

S&F Switch, Piano, flush type, polycarbonate, multipin 5 Amps, Single Pole, One way complete all as specified and directed.

S&F socket outlet 5 Amps, complete all as specified and directed.

M&L or ceiling fan regultors, electronic step type AC 230 Volts complete all as specified and directed.

S&F of ceiling rose PVC polycarbonate, isolated body, 3 terminals AC 230 volt complete all as specified and directed.

Supply and fix flush sheet metal enclosure SPN DB 2 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar, earth bar and neutral links complete including taking down old unsv all as specified and directed.

S&F MCB, SPN, 20 Ampstype curve 'C' 10 KA , 240V complete all as specified and directed.

S&F in repair LED Tube light fittings high lumens batten type, housed in extruded from powder coated aluminium 20 Watt with and including lamp and connecting up complete with PVC insulated and PVC sheathed round flexible three core copper conductor cable of ssuitable size complete all as specified and directed.

S&F in repair LED Tube light fittings high lumens batten type, housed in extruded from powder coated aluminium 10 Watt with and including lamp and connecting up complete with PVC insulated and PVC sheathed round flexible three core copper conductor cable of ssuitable size complete all as specified and directed.

S&F LED Lamp 7 Watt 230 V AC integrated circuit complete all as specified and directed.

S&F Lamp Holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Taking down Ceiling fan of any size any capacity such as replacement complete all as specified and as directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed, multistranded copper conductor of nominal cross sectional area 4.0 Sqmm alongwith one run of FRLS, PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 Sqmm as earth continuity conductor drawn through & including PVC conduit of suitable dia.complete all as specified & as directed. NOTE:- Tenderers may note that amount of credit Rs 1,52,308.00 will be deducted from the amount arrived, at the time of Acceptance of contract.

Harsha Consultant and Builders

Goel Enterprises

M/S ARORA ENTERPRISES