General- Rest house Kundara finishing works furniture supply and allied to rest house - General civil work

Amount

Kitchen Essentials

OD15760/2023-2024:Supply and fixing Water purifier (KENT Supreme Lite 2020 (11110) or Eureka forbes, Wall Mountable, RO + UF + TDS Control, 8 L Tank, White, 20 LPH Water Purifier)

OD15712/2023-2024:Providing good quality Jumper spin mop (with Bucket )

OD15744/2023-2024:Providing silicone Toilet brush with slim holder

OD186954/2022-2023:Providing Prestige / Equivalent Quality Induction Cooker..

OD187003/2022-2023: Supplying Samsung/ Equivalent Quality 230 L 3 Star Inverter Direct Cool Single Door Refrigerator(RR24T285YCR/NL, Camellia Purple, Base Stand with Drawer)

OD187136/2022-2023:Supplying dinner set including all charges..

OD11378/2023-2024:Supplying Plastic Bucket including all cost of conveyance etc complete.

OD11385/2023-2024:Supplying Plastic Mug including all cost of conveyance etc

OD11389/2023-2024:Providing Bombay Dyeing or equivalent quality single coat sheet (White) including all charges

OD14334/2023-2024:Supplying good quality cotton pillow cover including all cost conveyance and labour charges etc completed

OD11789/2023-2024:Supplying Anti-Slip Microfibre Bathmat - 60cm x 40cm

OD14571/2023-2024:Providing and fixing Poly carbonate crystal sheet 2mm thick as approved by the Engineer in charge and should be supplied in a single length of 12m or as decide by Engineer in charge. The sheets shall be fixed using self tapping screw of size with EDPM seal complete upto any pitch in horizontal/vertical/curved surfaces, but excluding the cost of purlins, rafters, trusses and including cutting to size and shapes where ever required, including labour, conveyance etc. complete.

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD15766/2023-2024:Engaging man coolies

Beautification

26.26.2:Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles.

OD188117/2022-2023:Providing and fixing office table with HDWR Pre-laminated with decorative lamination confirming to IS:14587 board framing with 18mm thick Pre-laminated board to shutter panels, 11mm thick HDWR pre-laminated panels to drawers with standard fittings including materials, labour, conveyance etc. complete (OD), size 1500x600x800mm with drawers( 3no) and one storage

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

OD187993/2022-2023:Providing, supplying and fixing 4mm ACP sheet to Aluminium frame including screws, labour etc. ( Aluminium frame to be paid separately)

OD240628/2022-2023:Supplying and placing flower plant in various types including all cost of conveyance and labour etc complete-organic

OD240629/2022-2023:Supply, spreading and laying of premium quality korean grass including korean grass, pesticide, fertilizer, conveyance, labour charges (cleaning, spreading and watering of grass) etc

OD240630/2022-2023:Well plastering for 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

OD240631/2022-2023:Supply and placing flower base (Chadi chatty) including all cost of conveyance and labour etc completed

FIROSKHAN H

Bidder Name

A JAYAKUMAR

FIROSKHAN H