General

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of Machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters - 1 Rmt.

Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of Machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters - 1 Bulb

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Providing High Yield Strength Deformed (HYSD) Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supply and placing of the Design Mix Concrete for M-20 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm H.B.G Metal including cost and conveyance of all Material like cement, Sand, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No.402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete (BLD-CSTN-2-14)

PLINTH BEAM CONCRETE M20

intermediate beams

NGL TO ROOF BEAM

for short beams

ROOF BEAM CONCRETE

ROOF BEAM CONCRETE

G.F SLAB UPTO 150MM THICK

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Brick Masonary in C.M (1:6) using 2nd Class well burnt ground moulded traditional size bricks of locally available having a crushing strength of not less than 35 Kg./Sq.Cm & size of 23x11x7 Cm including cost & conveyance of Material to site, mixing of Cement Mortar & laying of bricks & mortar to specified thickness, watering, curing, including all scaffolding, hire & operational charges of Machinery, all Labour charges & all water lead charges etc. complete for finished item of work. (BLD-CSTN-3-1)

Supply and fixing of 25mm outer dia heavy duty (1.50mm thickness) grade with IS 9537. part-3 regid PVC pipe of VIP/Besto plast/Goldmedal/Million plast/Sudhakar/Plyline of ISI mark for CONCEALES IN ROOF SLAB with all required accessories including chisiling the wall where ever necessary including masonry work for Light/Fan points and separate plug point with junction boxes including all lobour charges etc. complete

Plastering in C.M (1:4) 12 mm thick including cost and conveyance of all Material, Labour for mixing Material, laying and curing etc., complete - 10 Sq.M. (BLD-CSTN-6.2)

Providing impervious coat to exposed R.C.C Roof Slab surface with C.M (1:3), 20mm thick with 1 kg of water proof compound per bag of cement laid over roof when it is green including cost of all Material, excluding conveyance charges of Material and including all operational, incidental and Labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work - 10 Sq.M.

Supplying and fixing of Sal Wood Door Frame of section 125 mm x 75 mm (2 Vertical & 2 Horizontal) to accommodate 30mm thick Door Shutter. The Frame of section suitable to Double Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 35mm thick conforming to IS.2202 including painting to frame with primary coat and including cost of fixtures such as (i) 2 Nos.-250mm long M.S.powder coated Aldrops, (ii) 1 No.-250mm long 10mm M.S.Powder Coated Tower Bolt, (iii) 2 Nos.-150mm long M.S.poder coated Door Handles and (iv) 1 No. M.S.Powder Coated Door Stopper (v) 3 Nos. of butt hinges (vi) Anchor Fastings and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with teak ply on both faces of 35mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos.-250mm long M.S.powder coated Aldrops, (ii) 1 No.-250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos.-125mm long M.S.powder coated Door Handles and (iv) 1 No. Aluminium Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department. (with sill)

main door (1.82*2.43)

providing and fixing made UPVC white colour sliding glazed window upto 1.50m height dimention comprising of UPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60+0.2mm thick galvanized mild steel section made from rollforming process of required length ( shape & size according to UPVC profiles ). appropriate dimensions of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy )white according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy. BMT- P.80.B ( three trak)

Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes: As per list of recommended brands .

Supply, installation, testing and commissioning of 25mm dia Ball valve. Makes: As per list of recommended brands.

Supply of 32mm PPR Socket conforming to DIN Standards 8077/8086

Supply of 32mm PPR Elbow conforming to DIN Standards 8077/8086

Supply of 32mm PPR Tee conforming to DIN Standards 8077/8086

Supply of 32mm PPR End Cap conforming to DIN Standards 8077/8086

Supply of 32mm x 20mm PPR Reducer conforming to DIN Standards 8077/8092

Supply of 32mm x ½” PPR Female Threaded Adaptor conforming to DIN Standards 8077/8092

Supply of 32mm x ¾” PPR Male Threaded Adaptor conforming to DIN Standards 8077/8092

Supplying and fixing of 25mm Outer Dia. heavy duty (2.00 to 2.20 mm thickness) grade with IS.9537, Part-3 regid PVC Pipe of VIP/Besto plast/Goldmedal/Million plast/GM/Sudhakar/Polyline of ISI mark for CONCEALED IN ROOF SLAB with all required accessories including chisiling the wall where ever necessary including masonry work for Light/Fan Points and seperate plug point with MS deep junction boxes including all labour chartges etc. complete.

Supplying and fixing of 25mm Outer Dia. heavy duty (1.60 to 1.80 mm thickness) grade with IS.9537, Part-3 regid PVC Pipe of VIP/Besto plast/Goldmedal/Million plast/GM/Sudhakar/Polyline of ISI mark for CONCEALED IN WALLS with all required accessories including chisiling the wall where ever necessary including masonry work for Light/Fan Points and seperate plug point with junction boxes and bends of makes Gold medal/Million plast/GM/Sudhakar/Polyline /Bestoplast.Including all labour chartges etc. complete.

Provision for Seignorage charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item