Loading…
Loading…
Tender Value
₹67.2 L
EMD Value
₹67,250
Closing Date
24 Feb 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
The Chief Officer, Khambhat Nagarpalika, Khambhat
BID DOCUMENT FOR PROVIDING, SUPPLYING AND FIXING OF STREET LIGHT WITH LED AT VARIOUS AREA OF KHAMBHAT NAGARPALIKA UNDER: SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKAS YOJANA( OUT GROUTH) GRANT. YEAR: 2025-26.
270936
2025-26
Open
Street Lighting
Anand
14 documents required · 14 mandatory
₹2,832
The Chief Officer, Khambhat Nagarpalika, Khambhat
₹67,250
29 Jan 2026
29 Jan 2026
29 Jan 2026
24 Feb 2026
29 Jan 2026
Total Amount Rs.
Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017
Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as
per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at
the rate of input rate mentioned in all the tender.
Signature of Contractor President Chief Officer
Khambhat Nagarpalika Khambhat Nagarpalika
Khambhat Khambhat
SECTION-7 BILL OF QUANTITIES-174
KHAMBHAT NAGARPALIKA KHAMBHAT
ESTIMATE FOR SUPPLYING, ERECTING & COMMISSIONING OF STREET LIGHT WITH LED
AT GAYATRI NAGAR CIRCLE TO SOKHADA ROAD AT KHAMBHAT
ROAD LENGTH 700 RMT.00 (18 Rmt C/C)
Quantity Unit Discription Unit Amount
1 546.00 Mtr. Supplying and erecting Flexible PVC insulated multi strand
multi core 1.1 kv grade ISI marked copper wires of following
size to be erected as directed.
(e) 1.50 Sq.mm 3 core round PVC sheathed 44.44 Mtr.
2 2.00 Nos. providing and erecting Approved make Four pole moulded
case circuit breaker having breaking capacity ICU of 25 KA. at
415 V,having normal current rating up to 25 A to 100A. with
Fixed thermal & magnetic release suitable to work on A.C.
supply 50 c/s. with all internal connections & complete erected
in existing 16 G.M.S. housing. Cat.III
3 2.00 Nos. Approved make ELCBs / RCCBs conforming to IS: 12640 and
having sensitivity of 30 mA and Short Circuit withstand
capacity of 6 KA and suitable for operation on 3 phase and
neutral 415V. having characteristic of quick action & tripping
with all advance feature & do not incorporate any electronic
component for following Max. rating erected as directed.
(ii) 40Amps. FP Cat.III 2637.11 Ea.
4 39.00 Nos. providing and erecting Miniature circuit breaker single pole
0.5A to 2A system and having breaking capacity 10 KA to be
erected in existing box. confirming to IS 8828/1996 with ISI
Cat.III 270.68 Ea.
5 50.00 Kgs. Providing and erecting HOT deep Galvanised iron strip wire
to 16 SWG. 77.77 Kg.
6 39.00 Nos. Pipe type earthing having 150 cms.long and 2.5 cms. dia.
galvanised iron pipe with coupling and buch burried in
specially prepared earth pit complete with necessary 8 SWG
earth wire. 368.65 Ea.
SBD SECTION-7 BILL OF QUANTITIES-175
7 2.00 Nos. Supplying & erecting funnel type earthing having earth plate of
following size burred in specifically prepared earth pit 3 mtr.
below ground with 40 kg. charcoal and salt with alternate
layers of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with
a wire mesh for watering & bricks masonry block, C.I. Cover
complete as per para 7.3 of IS 3043 with necessary length of
double Galvanised Iron / copper earth wire No 6 SWG bolted
with lug to the plate and covered in 12 mm dia. G.I. pipe
mtr long complete connected to the nearest switch gear with
end socket as per direction & duly tested by earth tester
confirming to IS (As per drawing) with following specification.
(C) with 60 x 60 x 0.315 cms. Copper earth Plate 7874.97 Ea.
8 39.00 Nos. For using salt and charcoal/coke as required for pipe type 171.70 Ea.
9 Providing and erecting XLPE (IS:7098)(I)-88 ISI marked
armoured cable multistrand Aluminium conductor for 1.1 KV.
to be laid on wall with necessary clamps or in existing cable
trench / pipe at road crossing or floor of following size of
1365.00 Mtr. (C) 4 core 10 Sq. mm 138.37 Mtr.
10 975.00 Mtr. Providing & laying approved make Double Walled Corugated
pipe (DWC) of polythylene (Confirming to IS-14930-II) with
necessary connecting accessories of same materials at
required depth for laying of cable. Below ground / road surface
for enclosing cable and back filling the same to make ground
as per original. (A) 50 mm Dia
11 39.00 Nos. Supplying and erecting approved make Octagonal pole made
from HR sheet steel. The pole should be made as per IS. and
shall be coated with hot dip galvanizing as per IS
2629/2633/4759, suitable suspend local wind speed with
integral Junction box consist of terminal plate of min 6mm
Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB
Mounting, stud type terminal and arrangement for cable
termination to be erected With Suitable foundation (Included)
as per details given by manufacturer considering site
(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm
thickness with 225mmX225mmX16mm base plate, 4-M20
Bolts and 600mm long J-Bolt.Approx Pole weight 67 kg
SBD SECTION-7 BILL OF QUANTITIES-176
12 Supplying and erecting street light pole bracket comprising
main B Class MS pipe of 4.2 cm/require outside dia. complete
with suitable B Class M.S. sleeve tubing of approx.
45cms.length and suitable for 76.5mm/80mm or require size
pole top having sufficient fastners for fixing the brackets and
having suitable rise as per site condition as directed and
spread of 2 mtr.with suitable welded stiffener reducer and
with lock nut complete painted with one coat of Red oxide /
PU base primer and two coats of Aluminium / PU paint.
Suitable for side entry fitting brackets of following nos of arms.
37.00 Nos. (B) Double Arm Bracket 1.5 Mtr. 916.07 Ea.
2.00 Nos. [C] Triple Arm Bracket 1.5 Mtr. 1216.04 Ea.
13 Supplying and erecting LED street light / Flood light fittings
with High power White LEDs wattage of 3 Watt and above
assembled on single MCPCB, efficiency more than 130 lm/w
and corrosion free High pressure die cast aluminum housing
with smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/ lenses, with
toughened glass with company mark/name engraved or
embossed 160 to 270 V,Power Factor more than 0.95, THD <
10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(
fittings required LM-79 & LM-80 certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.) (A) Street Light (IP-65), Surge
protection -4KV integral and ,Light must have 440VAC line
supply with over-voltage protection.
80.00 Nos. (iii) Above 60 to 90 watts Cat-lll 5976.17 Ea.
14 2.00 Nos. Supplying & erecting approved make Digital time switch having
lithium cell 6 years operative and operate battery backup
channel day clock with 14 memory programme, suitable to
operate on 240V + 5%, 16A with, floating contacts Minimum
switching setup time 1 minimum & LCD display. Also
comprised permanent ON/OFF switching. Programming
switches & housed in fire proof thermoplastic enclosure &
transparent cover erected as required with necessary
connection erected as directed.
15 2.00 Nos. Supplying & Erecting Power Contactor for time switch
complete erected as per directions Cat-III.
(D) 4 pole 440V 40 Amp. 2782.55 Ea.
SBD SECTION-7 BILL OF QUANTITIES-177
16 2.00 Smt Providing & erecting weather proof, dust & vermin proof, floor
mounted front operated outdoor type double door cubical
panel board necessary IP-54 and above protection as per
approval from engineer incharge made from 14 SWG thick CRC
M.S. sheet for outer body & doors, 16 SWG thick CRC
M.S.sheet for internal partitions with necessary accesories
supporting angles/ flats channel including cutting, bending,
drilling, welding, riveting with internal partitions & cable alley
as per requirements & instruction of engineer-in-charge with
erection of supplied switch gears, BUSBARS, suitable size of
inter connecting PVC copper wire / copper-aluminium strips,
rubber grommets, rib, bakelite control fuses/MCB for
measuring instruments, earth bus & earth bolts, foundation
flange - bolts-base Plates, sufficient nos. of hinged doors,
handles with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice board,necessary
ventilation,earthing strip complete. The Panel shall be painted
with epoxy powder coating. (The rates excludes the cost of
switchgears, bus bars, inter connecting mains & Copper
Aluminium strips, meters, Fuses etc. The dimension shall be
measured excluding base beams) The panel shall be supplied
with following approved manufacturers with following size.(A)
locally fabricated panel board
17 50.00 Mtr Drilling the road without breaking the road surface (Asphalt)
for laying of cable for feeding power supply by making up to
following size of holes at both ends complete. (A) Up to
mm bore dia 411.07 Mtr
18 50.00 Mtr. Supplying following size of Light duty “A” Class G.I . Pipe &
erecting as directed by Engineer-in-charge. (C) 80 mm dia.
Add 1 % Quality Control Rs.
Add 2 % Contengancy Charge Rs.
SBD SECTION-7 BILL OF QUANTITIES-178
KHAMBHAT NAGARPALIKA KHAMBHAT
ESTIMATE FOR SUPPLYING, ERECTING & COMMISSIONING OF STREET LIGHT WITH LED
AT GAYATRI NAGAR CIRCLE TO TARAPUR HIGHWAY AT KHAMBHAT
ROAD LENGTH 700 RMT.00 (18 Rmt C/C)
Quantity Unit Discription Unit Amount
1 546.00 Mtr. Supplying and erecting Flexible PVC insulated
multi strand multi core 1.1 kv grade ISI marked
copper wires of following size to be erected as
(e) 1.50 Sq.mm 3 core round PVC sheathed 44.44 Mtr.
2 2.00 Nos. providing and erecting Approved make Four pole
moulded case circuit breaker having breaking
capacity ICU of 25 KA. at 415 V,having normal
current rating up to 25 A to 100A. with Fixed
thermal & magnetic release suitable to work on
A.C. supply 50 c/s. with all internal connections &
complete erected in existing 16 G.M.S. housing.
Cat.III 6173.12 Ea.
3 2.00 Nos. Approved make ELCBs / RCCBs conforming to IS:
12640 and having sensitivity of 30 mA and Short
Circuit withstand capacity of 6 KA and suitable for
operation on 3 phase and neutral 415V. having
characteristic of quick action & tripping with all
advance feature & do not incorporate any
electronic component for following Max. rating
erected as directed.
(ii) 40Amps. FP Cat.III 2637.11 Ea.
4 39.00 Nos. providing and erecting Miniature circuit breaker
single pole 0.5A to 2A system and having breaking
capacity 10 KA to be erected in existing box.
confirming to IS 8828/1996 with ISI Mark
Cat.III 270.68 Ea.
5 50.00 Kgs. Providing and erecting HOT deep Galvanised iron
strip wire 8 to 16 SWG. 77.77 Kg.
SBD SECTION-7 BILL OF QUANTITIES--179
6 39.00 Nos. Pipe type earthing having 150 cms.long and
cms. dia. galvanised iron pipe with coupling and
buch burried in specially prepared earth pit
complete with necessary 8 SWG earth wire. 368.65 Ea.
7 2.00 Nos. Supplying & erecting funnel type earthing having
earth plate of following size burred in specifically
prepared earth pit 3 mtr. below ground with
kg. charcoal and salt with alternate layers of
charcoal & salt, 20mm.dia. G.I. pipe with Funnel
with a wire mesh for watering & bricks masonry
block, C.I. Cover complete as per para 7.3 of IS
3043 with necessary length of double Galvanised
Iron / copper earth wire No 6 SWG bolted with lug
to the plate and covered in 12 mm dia. G.I. pipe
2.5 mtr long complete connected to the nearest
switch gear with end socket as per direction &
duly tested by earth tester confirming to IS (As
per drawing) with following specification.
(C) with 60 x 60 x 0.315 cms. Copper earth Plate
8 39.00 Nos. For using salt and charcoal/coke as required for 171.70 Ea.
pipe type earthing.
9 Providing and erecting XLPE (IS:7098)(I)-88 ISI
marked armoured cable multistrand Aluminium
conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing cable trench /
pipe at road crossing or floor of following size of
1365.00 Mtr. (C) 4 core 10 Sq. mm 138.37 Mtr.
10 975.00 Mtr. Providing & laying approved make Double Walled
Corugated pipe (DWC) of polythylene (Confirming
to IS-14930-II) with necessary connecting
accessories of same materials at required depth
for laying of cable. Below ground / road surface
for enclosing cable and back filling the same to
make ground as per original. (A) 50 mm Dia
SBD SECTION-7 BILL OF QUANTITIES--180
11 39.00 Nos. Supplying and erecting approved make Octagonal
pole made from HR sheet steel. The pole should
be made as per IS. and shall be coated with hot
dip galvanizing as per IS 2629/2633/4759, suitable
suspend local wind speed with integral Junction
box consist of terminal plate of min 6mm Hylam
sheet, standard profile 35mmX7.5mm Din-Rail for
MCB Mounting, stud type terminal and
arrangement for cable termination to be erected
With Suitable foundation (Included) as per details
given by manufacturer considering site
(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia,
3 mm thickness with 225mmX225mmX16mm
base plate, 4-M20 Bolts and 600mm long J-
Bolt.Approx Pole weight 67 kg
12 Supplying and erecting street light pole bracket
comprising main B Class MS pipe of
cm/require outside dia. complete with suitable B
Class M.S. sleeve tubing of approx. 45cms.length
and suitable for 76.5mm/80mm or require size
pole top having sufficient fastners for fixing the
brackets and having suitable rise as per site
condition as directed and spread of 2 mtr.with
suitable welded stiffener reducer and with lock
nut complete painted with one coat of Red oxide /
PU base primer and two coats of Aluminium / PU
paint. Suitable for side entry fitting brackets of
following nos of arms.
37.00 Nos. (B) Double Arm Bracket 1.5 Mtr. 916.07 Ea.
2.00 Nos. [C] Triple Arm Bracket 1.5 Mtr. 1216.04 Ea.
SBD SECTION-7 BILL OF QUANTITIES--181
13 Supplying and erecting LED street light / Flood
light fittings with High power White LEDs wattage
of 3 Watt and above assembled on single MCPCB,
efficiency more than 130 lm/w and corrosion free
High pressure die cast aluminum housing with
smooth finish powder coated and heat sink
extruded aluminium with diffuser and
Polycarbonate optics/ lenses, with toughened
glass with company mark/name engraved or
embossed 160 to 270 V,Power Factor more than
5700K,Uniformity ratio >0.45, Luminaire efficacy>
100 lumens/watt . LED driver efficiency > 85 %.(
fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage
capacity between the ranges shown.) (A) Street
Light (IP-65), Surge protection -4KV integral and
,Light must have 440VAC line supply with over-
voltage protection.
80.00 Nos. (iii) Above 60 to 90 watts Cat-lll 5976.17 Ea.
14 2.00 Nos. Supplying & erecting approved make Digital time
switch having lithium cell 6 years operative and
operate battery backup 1 channel day clock with
14 memory programme, suitable to operate on
240V + 5%, 16A with, floating contacts Minimum
switching setup time 1 minimum & LCD display.
Also comprised permanent ON/OFF switching.
Programming switches & housed in fire proof
thermoplastic enclosure & transparent cover
erected as required with necessary connection
erected as directed.
15 2.00 Nos. Supplying & Erecting Power Contactor for time
switch complete erected as per directions Cat-III.
(D) 4 pole 440V 40 Amp. 2782.55 Ea.
SBD SECTION-7 BILL OF QUANTITIES--182
16 2.00 Smt Providing & erecting weather proof, dust &
vermin proof, floor mounted front operated
outdoor type double door cubical panel board
necessary IP-54 and above protection as per
approval from engineer incharge made from
SWG thick CRC M.S. sheet for outer body & doors,
16 SWG thick CRC M.S.sheet for internal partitions
with necessary accesories , supporting angles/
flats channel including cutting, bending, drilling,
welding, riveting with internal partitions & cable
alley as per requirements & instruction of
engineer-in-charge with erection of supplied
switch gears, BUSBARS, suitable size of inter
connecting PVC copper wire / copper-aluminium
strips, rubber grommets, rib, bakelite control
fuses/MCB for measuring instruments, earth bus
& earth bolts, foundation flange - bolts-base
Plates, sufficient nos. of hinged doors, handles
with locking arrangement and rubber
gasket,heavy duty end terminal
connection,danger notice board,necessary
ventilation,earthing strip complete. The Panel
shall be painted with epoxy powder coating. (The
rates excludes the cost of switchgears, bus bars,
inter connecting mains & Copper Aluminium
strips, meters, Fuses etc. The dimension shall be
measured excluding base beams) The panel shall
be supplied with following approved
manufacturers with following size.(A) locally
fabricated panel board
17 50.00 Mtr Drilling the road without breaking the road
surface (Asphalt) for laying of cable for feeding
power supply by making up to following size of
holes at both ends complete. (A) Up to 100 mm
bore dia 411.07 Mtr
SBD SECTION-7 BILL OF QUANTITIES--183
18 50.00 Mtr. Supplying following size of Light duty “A” Class
G.I . Pipe & erecting as directed by Engineer-in-
charge. (C) 80 mm dia. 471.67 Mtr
Add 1 % Quality Control Rs.
Add 2 % Contengancy Charge Rs.
SBD SECTION-7 BILL OF QUANTITIES--184
KHAMBHAT NAGARPALIKA , KHAMBHAT
ESTIMATE FOR PROVIDING & FIXING LIGHTS AND FIXTURES AT RAILWAY FATAK TO RABARI VAS
GARNADA TO GSPC JUNI OFFICE SUDHI, AT KHAMBHAT.
Quantity Unit Discription Unit Amount
1 1400.00 Rmt. Supplying & erecting XLPE(IS:7098)(I)-88 ISI
unarmoured copper cable 1.1 KV grade to be
erected as directed of following size.
(A) 2 Core 2.5 sq. mm 99.99 Rmt.
2 6.00 Ea. Approved make Four pole moulded case circuit
breaker having breaking capacity ICU of 25 KA. at
415 V,having normal current rating up to 25 A to
100A. with Fixed thermal & magnetic release
suitable to work on A.C. supply 50 c/s. with all
internal connections & complete erected in existing
16 G.M.S. housing. Cat-llI 6173.12 Ea.
3 6.00 Each Approved make ELCBs / RCCBs conforming to IS:
12640 and having sensitivity of 30 mA and Short
Circuit withstand capacity of 6 KA and suitable for
operation on 3 phase and neutral 415V. having
characteristic of quick action & tripping with all
advance feature & do not incorporate any electronic
component for following Max. rating erected as
(iii) 63 Amps. FP Cat. III 3040.10 Each
4 78.00 Ea. providing and erecting Miniature circuit breaker
single pole 0.5A to 2A system and having breaking
capacity 10 KA to be erected in existing box.
confirming to IS 8828/1996 with ISI Mark
Cat.III 270.68 Ea.
5 30.00 Kg Providing and erecting Annealed bare Copper wire
to 16 SWG. 794.87 Kg
[3-14-4]Add.1% Labour Cess.
6 78.00 Ea. Providing and erecting Pipe type earthing having
cms.long and 2.5 cms. dia. galvanised iron pipe with
coupling and buch buried in specially prepared earth
pit complete with necessary 8 SWG earth wire.
SBD SECTION-7 BILL OF QUANTITIES-185
7 6.00 Ea. Supplying & erecting funnel type earthing having
earth plate of following size burred in specifically
prepared earth pit 3 mtr. below ground with 40 kg.
charcoal and salt with alternate layers of charcoal &
salt, 20mm.dia. G.I. pipe with Funnel with a wire
mesh for watering & bricks masonry block, C.I. Cover
complete as per para 7.3 of IS 3043 with necessary
length of double Galvanised Iron / copper earth wire
No 6 SWG bolted with lug to the plate and covered
in 12 mm dia. G.I. pipe 2.5 mtr long complete
connected to the nearest switch gear with end
socket as per direction & duly tested by earth tester
confirming to IS (As per drawing) with following
(C) with 60 x 60x 0.315 cms. Copper earth Plate
8 78.00 Ea. For using salt and charcoal / coke as required for
pipe type earthing.
9 1400.00 Mtr Providing and erecting XLPE (IS:7098)(I)-88 ISI
armoured cable multistrand / Solid Aluminium
conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of
following size of cables (C) 4 core 10 Sq. mm 138.37 Mtr.
10 1400.00 Mtr. Providing & laying approved make Double walled
corrugated pipes (DWC) of polyethylene(conforming
to IS 14930 II )with necessary connecting
accessories of same material at required depth in
existing trench for laying of cable. below ground /
road surface for enclosing cable (A)50 mm outer dia
11 156.00 Ea. Providing and, fixing heavy duty flange type brass
cable gland with rubber ring for PVC insulated
armoured cable complete with out going tails,
insulating tape etc for following size of cables. 47.47 Ea.
(D) 2 to 4 core 16 Sq. mm
12 78.00 Ea. Supplying & erecting Galvanized M.S pipe post “B”
class 88.9 mm O.D 6 mtr. Long duly painted with
two coats of aluminium paint complete with metallic
base- plate of 300 mm x 300 mm x 4mm thick for
using as a compound light pole with approx. weight
SBD SECTION-7 BILL OF QUANTITIES-186
13 78.00 Ea. Providing 1:2:4 cement concrete foundation & 70 %
PCC from bottom including excavation for the pole
of size 45 x 45 x 100 cm. Deep in below ground level
with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm)
high upper ground level with necessary curing and
finishing in approved manner. ( for 4 & 6 mtr pole)
14 78.00 Each Supplying and erecting LED street light / Flood light
fittings with High power White LEDs wattage of
1Watt and above assembled on single MCPCB,
efficiency more than 130 lm/w and corrosion free
High pressure die cast aluminum housing with
smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/
lenses with company mark/name engraved or
embossed 120 to 300 V,Power Factor more than
0.95, THD < 10 %, CCT 3000 K to 5700K, Uniformity
ratio >0.45, Luminaire efficacy> 100 lumens/watt .
LED driver efficiency > 85 %.CREE / OSRAM / PHILIPS
Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make
LED used for luminaire. ( fittings required LM-79 &
LM-80 certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.)
(C) Post Top Lantern LED fitting comprises of finish
cast aluminum spigot and spun aluminum canopy
fixed with opal polycarbonate, pipe arrangement for
vertical mounting driver and accessories wired upto
terminal block.IP 65 4092.52 Ea.
15 3.00 Ea Supplying & erecting power contactor ,AC3 duty for
time switch complete erected as per direction Cat III
(B)2 pole 250 V 32 Amp
SBD SECTION-7 BILL OF QUANTITIES-187
16 6.00 No. Supplying & erecting IP 55 grade following size
section pillar fabricated from joint less M.S. Sheet
with angle iron legs made from jointless M.S. Angle
with cable clamps to be buried in ground to have
appropriate erection to work uniform until erected
with cement concrete foundation and 45 cm high
bricks work finishing with plaster etc. hinged double
door internally supported on both side, with
internal and outside looking arrangement with look
and keys in duplicate 35 x 35 x 5 mm M.S. Angle of
Two Nos. one is welded and other with nut and bolt
for erecting Bakelite sheet. Painting the Section
Pillar inside and out side with three tank powder
coated paint. section pillar roof should be without
joint with water leakage proof & tested as per IP
test & followed by IS 2147 of 1962 (B) 75 X 60 X
cm section pillar fabricated from 16 Gauge MS Sheet
with angle iron legs 45 cm long made from 35 X 35 X
5 mm thick MS angle.
Add 18% GST Rs.
Add 1 % Quality Control Rs.
Add 2 % Contengancy Charge Rs.
SBD SECTION-7 BILL OF QUANTITIES-188
KHAMBHAT NAGARPALIKA , KHAMBHAT
ESTIMATE FOR PROVIDING & FIXING LIGHTS AND FIXTURES FROM BAITHAK MANDIR TO B.P.L
GODOWN SUDHI, AT KHAMBHAT.
Quantity Unit Discription Unit Amount
1 350.00 Rmt. Supplying & erecting XLPE(IS:7098)(I)-88 ISI
unarmoured copper cable 1.1 KV grade to be
erected as directed of following size.
(A) 2 Core 2.5 sq. mm 99.99 Rmt.
2 2.00 Ea. Approved make Four pole moulded case circuit
breaker having breaking capacity ICU of 25 KA. at
415 V,having normal current rating up to 25 A to
100A. with Fixed thermal & magnetic release
suitable to work on A.C. supply 50 c/s. with all
internal connections & complete erected in existing
16 G.M.S. housing. Cat-llI 6173.12 Ea.
3 2.00 Each Approved make ELCBs / RCCBs conforming to IS:
12640 and having sensitivity of 30 mA and Short
Circuit withstand capacity of 6 KA and suitable for
operation on 3 phase and neutral 415V. having
characteristic of quick action & tripping with all
advance feature & do not incorporate any electronic
component for following Max. rating erected as
(iii) 63 Amps. FP Cat. III 3040.10 Each
4 20.00 Ea. providing and erecting Miniature circuit breaker
single pole 0.5A to 2A system and having breaking
capacity 10 KA to be erected in existing box.
confirming to IS 8828/1996 with ISI Mark
Cat.III 270.68 Ea.
5 10.00 Kg Providing and erecting Annealed bare Copper wire
to 16 SWG. 794.87 Kg
6 20.00 Ea. Providing and erecting Pipe type earthing having
cms.long and 2.5 cms. dia. galvanised iron pipe with
coupling and buch buried in specially prepared earth
pit complete with necessary 8 SWG earth wire.
SBD SECTION-7 BILL OF QUANTITIES-189
7 2.00 Ea. Supplying & erecting funnel type earthing having
earth plate of following size burred in specifically
prepared earth pit 3 mtr. below ground with 40 kg.
charcoal and salt with alternate layers of charcoal &
salt, 20mm.dia. G.I. pipe with Funnel with a wire
mesh for watering & bricks masonry block, C.I. Cover
complete as per para 7.3 of IS 3043 with necessary
length of double Galvanised Iron / copper earth wire
No 6 SWG bolted with lug to the plate and covered
in 12 mm dia. G.I. pipe 2.5 mtr long complete
connected to the nearest switch gear with end
socket as per direction & duly tested by earth tester
confirming to IS (As per drawing) with following
(C) with 60 x 60x 0.315 cms. Copper earth Plate
8 20.00 Ea. For using salt and charcoal / coke as required for
pipe type earthing.
9 350.00 Mtr Providing and erecting XLPE (IS:7098)(I)-88 ISI
armoured cable multistrand / Solid Aluminium
conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of
following size of cables (C) 4 core 10 Sq. mm 138.37 Mtr.
10 350.00 Mtr. Providing & laying approved make Double walled
corrugated pipes (DWC) of polyethylene(conforming
to IS 14930 II )with necessary connecting
accessories of same material at required depth in
existing trench for laying of cable. below ground /
road surface for enclosing cable (A)50 mm outer dia
11 20.00 Ea. Providing and, fixing heavy duty flange type brass
cable gland with rubber ring for PVC insulated
armoured cable complete with out going tails,
insulating tape etc for following size of cables. 47.47 Ea.
(D) 2 to 4 core 16 Sq. mm
12 20.00 Ea. Supplying & erecting Galvanized M.S pipe post “B”
class 88.9 mm O.D 6 mtr. Long duly painted with
two coats of aluminium paint complete with metallic
base- plate of 300 mm x 300 mm x 4mm thick for
using as a compound light pole with approx. weight
SBD SECTION-7 BILL OF QUANTITIES-190
13 20.00 Ea. Providing 1:2:4 cement concrete foundation & 70 %
PCC from bottom including excavation for the pole
of size 45 x 45 x 100 cm. Deep in below ground level
with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm)
high upper ground level with necessary curing and
finishing in approved manner. ( for 4 & 6 mtr pole)
14 20.00 Each Supplying and erecting LED street light / Flood light
fittings with High power White LEDs wattage of
1Watt and above assembled on single MCPCB,
efficiency more than 130 lm/w and corrosion free
High pressure die cast aluminum housing with
smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/
lenses with company mark/name engraved or
embossed 120 to 300 V,Power Factor more than
0.95, THD < 10 %, CCT 3000 K to 5700K, Uniformity
ratio >0.45, Luminaire efficacy> 100 lumens/watt .
LED driver efficiency > 85 %.CREE / OSRAM / PHILIPS
Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make
LED used for luminaire. ( fittings required LM-79 &
LM-80 certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.)
(C) Post Top Lantern LED fitting comprises of finish
cast aluminum spigot and spun aluminum canopy
fixed with opal polycarbonate, pipe arrangement for
vertical mounting driver and accessories wired upto
terminal block.IP 65 4092.52 Ea.
15 3.00 Ea Supplying & erecting power contactor ,AC3 duty for
time switch complete erected as per direction Cat III
(B)2 pole 250 V 32 Amp
SBD SECTION-7 BILL OF QUANTITIES-191
16 2.00 No. Supplying & erecting IP 55 grade following size
section pillar fabricated from joint less M.S. Sheet
with angle iron legs made from jointless M.S. Angle
with cable clamps to be buried in ground to have
appropriate erection to work uniform until erected
with cement concrete foundation and 45 cm high
bricks work finishing with plaster etc. hinged double
door internally supported on both side, with
internal and outside looking arrangement with look
and keys in duplicate 35 x 35 x 5 mm M.S. Angle of
Two Nos. one is welded and other with nut and bolt
for erecting Bakelite sheet. Painting the Section
Pillar inside and out side with three tank powder
coated paint. section pillar roof should be without
joint with water leakage proof & tested as per IP
test & followed by IS 2147 of 1962 (B) 75 X 60 X
cm section pillar fabricated from 16 Gauge MS Sheet
with angle iron legs 45 cm long made from 35 X 35 X
5 mm thick MS angle.
Add 1 % Quality Control Rs.
Add 2 % Contengancy Charge Rs.
SBD SECTION-7 BILL OF QUANTITIES-192
KHAMBHAT NAGARPALIKA KHAMBHAT
ESTIMATE FOR SUPPLYING, ERECTING & COMMISSIONING OF STREET LIGHT WITH LED
AT SWAMINARAYAN PARK TO SHIVAM PUMPING STATION AT KHAMBHAT
ROAD LENGTH 500 RMT.00 (18 Rmt C/C)
Quantity Unit Discription Unit Amount
1 392.00 Mtr. Supplying and erecting Flexible PVC insulated
multi strand multi core 1.1 kv grade ISI marked
copper wires of following size to be erected as
(e) 1.50 Sq.mm 3 core round PVC sheathed 44.44 Mtr.
2 2.00 Nos. providing and erecting Approved make Four pole
moulded case circuit breaker having breaking
capacity ICU of 25 KA. at 415 V,having normal
current rating up to 25 A to 100A. with Fixed
thermal & magnetic release suitable to work on
A.C. supply 50 c/s. with all internal connections &
complete erected in existing 16 G.M.S. housing.
Cat.III 6173.12 Ea.
3 2.00 Nos. Approved make ELCBs / RCCBs conforming to IS:
12640 and having sensitivity of 30 mA and Short
Circuit withstand capacity of 6 KA and suitable for
operation on 3 phase and neutral 415V. having
characteristic of quick action & tripping with all
advance feature & do not incorporate any
electronic component for following Max. rating
erected as directed.
(ii) 40Amps. FP Cat.III 2637.11 Ea.
4 28.00 Nos. providing and erecting Miniature circuit breaker
single pole 0.5A to 2A system and having breaking
capacity 10 KA to be erected in existing box.
confirming to IS 8828/1996 with ISI Mark
Cat.III 270.68 Ea.
5 50.00 Kgs. Providing and erecting HOT deep Galvanised iron
strip wire 8 to 16 SWG. 77.77 Kg.
SBD SECTION-7 BILL OF QUANTITIES-193
6 28.00 Nos. Pipe type earthing having 150 cms.long and
cms. dia. galvanised iron pipe with coupling and
buch burried in specially prepared earth pit
complete with necessary 8 SWG earth wire. 368.65 Ea.
7 2.00 Nos. Supplying & erecting funnel type earthing having
earth plate of following size burred in specifically
prepared earth pit 3 mtr. below ground with
kg. charcoal and salt with alternate layers of
charcoal & salt, 20mm.dia. G.I. pipe with Funnel
with a wire mesh for watering & bricks masonry
block, C.I. Cover complete as per para 7.3 of IS
3043 with necessary length of double Galvanised
Iron / copper earth wire No 6 SWG bolted with lug
to the plate and covered in 12 mm dia. G.I. pipe
2.5 mtr long complete connected to the nearest
switch gear with end socket as per direction &
duly tested by earth tester confirming to IS (As
per drawing) with following specification.
(C) with 60 x 60 x 0.315 cms. Copper earth Plate
8 28.00 Nos. For using salt and charcoal/coke as required for 171.70 Ea.
pipe type earthing.
9 Providing and erecting XLPE (IS:7098)(I)-88 ISI
marked armoured cable multistrand Aluminium
conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing cable trench /
pipe at road crossing or floor of following size of
980.00 Mtr. (C) 4 core 10 Sq. mm 138.37 Mtr.
10 700.00 Mtr. Providing & laying approved make Double Walled
Corugated pipe (DWC) of polythylene (Confirming
to IS-14930-II) with necessary connecting
accessories of same materials at required depth
for laying of cable. Below ground / road surface
for enclosing cable and back filling the same to
make ground as per original. (A) 50 mm Dia
SBD SECTION-7 BILL OF QUANTITIES-194
11 28.00 Nos. Supplying and erecting approved make Octagonal
pole made from HR sheet steel. The pole should
be made as per IS. and shall be coated with hot
dip galvanizing as per IS 2629/2633/4759, suitable
suspend local wind speed with integral Junction
box consist of terminal plate of min 6mm Hylam
sheet, standard profile 35mmX7.5mm Din-Rail for
MCB Mounting, stud type terminal and
arrangement for cable termination to be erected
With Suitable foundation (Included) as per details
given by manufacturer considering site
(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia,
3 mm thickness with 225mmX225mmX16mm
base plate, 4-M20 Bolts and 600mm long J-
Bolt.Approx Pole weight 67 kg
12 Supplying and erecting street light pole bracket
comprising main B Class MS pipe of
cm/require outside dia. complete with suitable B
Class M.S. sleeve tubing of approx. 45cms.length
and suitable for 76.5mm/80mm or require size
pole top having sufficient fastners for fixing the
brackets and having suitable rise as per site
condition as directed and spread of 2 mtr.with
suitable welded stiffener reducer and with lock
nut complete painted with one coat of Red oxide /
PU base primer and two coats of Aluminium / PU
paint. Suitable for side entry fitting brackets of
following nos of arms.
26.00 Nos. (B) Double Arm Bracket 1.5 Mtr. 916.07 Ea.
2.00 Nos. [C] Triple Arm Bracket 1.5 Mtr. 1216.04 Ea.
SBD SECTION-7 BILL OF QUANTITIES-195
13 Supplying and erecting LED street light / Flood
light fittings with High power White LEDs wattage
of 3 Watt and above assembled on single MCPCB,
efficiency more than 130 lm/w and corrosion free
High pressure die cast aluminum housing with
smooth finish powder coated and heat sink
extruded aluminium with diffuser and
Polycarbonate optics/ lenses, with toughened
glass with company mark/name engraved or
embossed 160 to 270 V,Power Factor more than
5700K,Uniformity ratio >0.45, Luminaire efficacy>
100 lumens/watt . LED driver efficiency > 85 %.(
fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage
capacity between the ranges shown.) (A) Street
Light (IP-65), Surge protection -4KV integral and
,Light must have 440VAC line supply with over-
voltage protection.
58.00 Nos. (iii) Above 60 to 90 watts Cat-lll 5976.17 Ea.
14 2.00 Nos. Supplying & erecting approved make Digital time
switch having lithium cell 6 years operative and
operate battery backup 1 channel day clock with
14 memory programme, suitable to operate on
240V + 5%, 16A with, floating contacts Minimum
switching setup time 1 minimum & LCD display.
Also comprised permanent ON/OFF switching.
Programming switches & housed in fire proof
thermoplastic enclosure & transparent cover
erected as required with necessary connection
erected as directed.
15 2.00 Nos. Supplying & Erecting Power Contactor for time
switch complete erected as per directions Cat-III.
(D) 4 pole 440V 40 Amp. 2782.55 Ea.
SBD SECTION-7 BILL OF QUANTITIES-196
16 2.00 Smt Providing & erecting weather proof, dust &
vermin proof, floor mounted front operated
outdoor type double door cubical panel board
necessary IP-54 and above protection as per
approval from engineer incharge made from
SWG thick CRC M.S. sheet for outer body & doors,
16 SWG thick CRC M.S.sheet for internal partitions
with necessary accesories , supporting angles/
flats channel including cutting, bending, drilling,
welding, riveting with internal partitions & cable
alley as per requirements & instruction of
engineer-in-charge with erection of supplied
switch gears, BUSBARS, suitable size of inter
connecting PVC copper wire / copper-aluminium
strips, rubber grommets, rib, bakelite control
fuses/MCB for measuring instruments, earth bus
& earth bolts, foundation flange - bolts-base
Plates, sufficient nos. of hinged doors, handles
with locking arrangement and rubber
gasket,heavy duty end terminal
connection,danger notice board,necessary
ventilation,earthing strip complete. The Panel
shall be painted with epoxy powder coating. (The
rates excludes the cost of switchgears, bus bars,
inter connecting mains & Copper Aluminium
strips, meters, Fuses etc. The dimension shall be
measured excluding base beams) The panel shall
be supplied with following approved
manufacturers with following size.(A) locally
fabricated panel board
17 50.00 Mtr Drilling the road without breaking the road
surface (Asphalt) for laying of cable for feeding
power supply by making up to following size of
holes at both ends complete. (A) Up to 100 mm
bore dia 411.07 Mtr
SBD SECTION-7 BILL OF QUANTITIES-197
18 50.00 Mtr. Supplying following size of Light duty “A” Class
G.I . Pipe & erecting as directed by Engineer-in-
charge. (C) 80 mm dia. 471.67 Mtr
Add 1 % Quality Control Rs.
Add 2 % Contengancy Charge Rs.
SBD SECTION-7 BILL OF QUANTITIES-198
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ STRRET LIGHT.pdf
Notes.pdf
OTHER IMPORTANT-1.pdf
Document
Document
Document
Download all tender documents and submit your bid