NIT No. 02 Item No. 17 EE (T)/ACE( M)-4 (2

Horizontal 30 H.P. monobloc water pump set of discharge flow rate-210 to 1710 LPM at 30 to 40 meter head range with C.I. impeller gland packing, sealing C-40 shaft TEFC motor, IP-55 “F”-class insulation Sleeve coupled with 30 HP, 3000 rpm, 3 phase, 415 volt TEFC motor, size of suction & delivery-100x100 mm, mounted on MS base frame with coupling, coupling guard. Make of Pump set: KBL,Lubi,ABB and any approved make of DJB

Casting of RCC foundation of size 0.5 mtr x 1 mtr. x 0.5 mtrs. with the help of Iron Bars & C:C in the ratio 1:1.5:3. The work i/c fixing /grouting of MS foundation nut bolts of suitable size including welding of foundation bolts with the Iron Bars.

Supply of MS pipe of 100 mm dia. 08 mm thickness MAKE: Any approved make of DJB

Supply & fifing of M.S. taper with flanged of one side 250 mm dia and other side of 100 mm (reducer-250x100 mm) size the thickness of pipe will be 8 mm and flange thickness minimum 8mm.

Supply of M.S. flange 100 mm dia. 08 mm thickness

Supply of rubber packing for flange joint as per site requirement.

Supply of good quality nut, bolts with washer of different size.

Supply of PVC insulated Flexible Copper Conductor 35 sq.mm three core cable for above pump set to connect motor to starter. Make: Havells, Polycab, Grandley and any approve make of DJB

Supply of PVC insulated Aluminum armored 70 sq.mm three core cable for Main to panel Make: Havells, Polycab, Grandley and any approve make of DJB

Supply of chain pulley block having size capacity 1 ton. Make:- Indef, Wester and any approved make of DJB

Supply of chain for 1 ton pulley block Make:- Indef, Wester and any approved make of DJB

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut,bolt, spring, washer excavation and re-filling etc. as required. Approve rate by DJB

Packing and transportation charges of the Pump set .This includes shifting of the complete pump set from shop to site and transportation and loading unloading cost done with the help of manual labor.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp). For 70 sq.mm

Making the required incoming power supply connections between main supply and new incomer panel by connecting the cable after relaying of cable and re -thimbling of cable ends as per requirement.

Fixing the pump set over the base frame with the help of tools & tackles with the help of heavy labour as per site. MS pipe including fixing of Suction & delivery Mains with the help of the gas cutter, ,welding m/c including welding rods and other tools & tackles etc. complete in all respect as per site requirement

Testing and commissioning of Pumpset as per required parameters with relevant IS testing of the panel prior to switching on as follows. Continuity and earth testing. Meggaring of all equipments for phase to phase, neutral to body, neutral to earth and phase to earth. Checking for all tightness of nut and bolts. Alignment of doors etc. Interlocking tests. All function tests

SHRI SHIV ENTERPRISE