REPAIRS TO INTERNAL WIRING INCLUDING FITTING/FIXTURE TO OFFRS MD ACCN UNDER GE MISAMARI

Amount

Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) of any description on batten/conduit (Service-able Fittings such as Switches, Ceiling Roses, Pendants, Fan Regulators, Sockets, Light Fitting, etc. to be kept in safe custody for reuse) and making good disturbed surfaces of Ceiling, Walls, etc. so as to match the existing Finishes complete all as specified and as directed.

Taking out/down burnt/unserviceable Main Switches, DB's, Bus-bars Chambers including all Fittings & Fixtures, etc. from existing Main Board and making good disturbed surfaces of Walls, Ceiling, etc. so as to match the existing Finishes, complete all as specified and as directed. NOTE : Quoted Unit Rate against DB's will deemed to be included for taking out/ down of MCB SP/SPN/ TPN.

Taking down old unserviceable/burnt Submain Wiring with copper /aluminum conductor PVC insulated cable of any size drawn through PVC Casing Caping/Conduit including GI Wire Accessories etc. and making good disturbed surfaces of Walls, Ceiling, etc. so as to match the existing Finishes, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including Rigid PVC Conduit, medium grade, ISI marked of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLS) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

All as per item No. 4 here in before for One Ceiling Fan/Exhaust Fan Point controlled by One 1-Way Switch 5 Amp and Regulator, complete all as specified and as directed.

All as per item No. 4 here in before for One 3 Pin 5 Amps Switch Socket Outlet Point controlled by one switch on the Same Board, complete all as specified and as directed.

All as per item No. 4 here in before but for One 3 Pin 5 Amps Switch Socket Outlet Point controlled by one switch on Independent Board, complete all as specified and as directed.

All as per item No. 4 here in before but for One Bell Point controlled by One Bell Switch 5 Amp, complete all as specified and as directed.

All as per item No. 4 here in before but for One Light Point controlled by One 2-Way Switch 5 Amp, complete all as specified and as directed.

M&L Point Wiring with 2.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke(FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including Rigid PVC Conduit, medium grade, ISI marked of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLS) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for 5/15 Amps Switch Socket Combination Point, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including PVC Casing and Caping medium grade of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLS) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

All as per Item no. 11 here in before but for One Ceiling Fan/Exhaust Fan Point controlled by One 1-Way Switch 5 Amp and Regulator, complete all as specified and as directed.

All as per Item no. 11 here in before but for 3pin 5Amps switch socket outlet point controlled by One Switch on the Same Board, complete all as specified and as directed.

All as per Item no. 11 here in before but for 3pin 5Amps switch socket outlet point controlled by One Switch on Independent Board, complete all as specified and as directed.

All as per Item no. 11 here in before for One Bell Point controlled by One Bell Switch 5 Amp, complete all as specified and as directed.

All as per Item no. 11 here in beforeor One Light Point controlled by One 2-Way Switch 5Amp, complete all as specified and as directed.

M&L Point Wiring with 2.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke(FRLS) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including PVC Casing and Caping medium grade of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLS) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for 5/15 Amps Switch Socket Combination Point, complete all as specified and as directed.

M&L Sub-main Wiring with 2-Runs of Single Core 6.0 Sq mm PVC insulated unsheated multi-stranded 1100 Volts grade with Copper Conductor drawn through and including Non-metalic PVC Rigid Conduit heavy duty ISI marked and its Accessories including 1-Run of Single Core 6.0 Sq mm PVC insulated unsheated multi-stranded 1100 Volts grade with Copper Conductor Cable as Earth Continuty Conductor along with the Wiring and connected from DB to DB/Main Board, complete all as specified and as directed. NOTE :- (a) Cost of PVC Conduit with all Fittings/Accessories will deem to be included in the Quoted Unit Rate. (b) Cables as mentioned in Schedule ‘A’ Items and 1-Run of PVC Conduit with all Fittings/Accessories will be measured and paid as One Unit. (c) Sub-main Wiring will be measured PVC Conduit only. Wire required for looping, etc as ordered will deem to be included in the Quoted Unit Rate.

M & L Submain wiring with 4 runs of single core 10 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC concealled conduit ISI marked and its accessories including two run of single core 10 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and directed. NOTE :- (a) Cost of PVC Conduit with all Fittings/Accessories will deem to be included in the Quoted Unit Rate. (b) Cables as mentioned in Schedule ‘A’ Items and 1-Run of PVC Conduit with all Fittings/Accessories will be measured and paid as One Unit. (c) Sub-main Wiring will be measured PVC Conduit only. Wire required for looping, etc as ordered will deem to be included in the Quoted Unit Rate.

S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

Fixing only Switch Piano, Single Pole, Flush type, 5 Amps, 240 Volts (Serviceable Switch obtained from Sl Item No. 1 here-in-before), complete all as specified and as directed.

S&F Switch Piano, Flush type, Single Pole, 2-Way, 5Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Bell Push, Flush type, 5 Amps, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Socket Outlet, 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5 Amp, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

Fixing only Socket Outlet, Flush type, multi-purpose, 2/3 Pin, 5 Amps 2-in-1, 240 Volts (Serviceable Socket obtained from Sl Item No. 1 here-in-before), complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

Fixing only Switch Socket Combination, Flush type, multi-purpose, 2/3 Pin, 5 Amps, 2-in-1, 240 Volts (Serviceable Switch Socket obtained from Sl Item No. 1 here-in-before), complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 3/5 Pin, 5/15 Amp, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

Fixing only Switch Socket Combination, 2-in-1, multi-purpose, 3/5 Pin, 5/15 Amps, Flush type (Serviceable Switch Socket obtained from Sl Item No.1 here-in-before), complete all as specified and as directed.

S&F Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volts, conforming to IS and connecting up, complete all as specified and as directed.

Fixing only Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volts (Serviceable Ceiling Rose obtained from Sl Item No.1 here-in-before), complete all as specified and as directed.

S&F Ceiling Fan Regulator, Step type, Flush type, heavy duty, suitable to work on 230 Volt, AC supply and connecting up, complete all as specified and as directed.

Fixing only Ceiling Fan Regulator, Step type, Flush type, heavy duty, (Serviceable Regulator obtained from Sl Item No.1 here-in-before), and connecting up, complete all as specified and as directed.

S&F Lamp Holder Surface Bakelite with Back Plate insulated body suitable for Batten/Angle Fittings and fixed with PVC Block, conforming to IS and connecting up, complete all as specified and as directed.

Fixing only Lamp Holder Surface Bakelite with Back Plate insulated body suitable for Batten/Angle Fittings and fixed with PVC Block (Serviceable Holder obtained from Sl Item No.1 here-in-before), complete all as specified and as directed.

S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, including dismantling the existing unserviceable switch, complete all as specified and as directed.

S & F Modular Switch single pole, one way 6 amps, 230 volts, 1 module as per sample including removal old existing unserviceable one, complete all as specified and directed.

S & F Modular Switch single pole , one way 16 amps,, 1 module 230 volts as per sample including removal old existing unserviceable one, complete all as specified and directed.

S & F Modular Bell Push single pole, one module, 6 amps, 230 volts as per sample including removal old existing unserviceable one, complete all as specified and directed.

S & F Socket, 6A - 2/3 pin combined 2 module, 230 volts as per sample including removal old existing unserviceable one, complete all as specified and directed.

S & F Socket 6A/16A - 2/3 pin combined 2 module,, 230 volts as per sample including removal old existing unserviceable one, complete all as specified and directed.

S&F Switch Piano, Flush type, Single Pole, 2-Way, 5Amps, 240 Volt, conforming to IS and connecting up, including dismantling the existing unserviceable switch, complete all as specified and as directed.

S&F Socket Outlet, 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5 Amp, 230 Volt, conforming to IS and connecting up, including dismantling the existing unserviceable Socket,complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5 Amp, 240 Volt, conforming to IS and connecting up, including dismantling the existing unserviceable Socket complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 3/5 Pin, 5/15 Amp, 230 Volt, conforming to IS and connecting up, including dismantling the existing unserviceable Socket complete all as specified and as directed.

S&F Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volts, conforming to IS and connecting up, including dismantling the existing unserviceable Ceiling Rose complete all as specified and as directed.

S&F Ceiling Fan Regulator, Step type, Flush type, heavy duty, suitable to work on 230 Volt, AC supply and connecting up, including dismantling the existing unserviceable Regulator complete all as specified and as directed.

S&F Lamp Holder Surface Bakelite with Back Plate insulated body suitable for Batten/Angle Fittings and fixed with PVC Block, conforming to IS and connecting up, including dismantling the existing unserviceable Holder complete all as specified and as directed.

S&F Call Bell (as approved), suitable to work on 230 Volt, AC supply and connecting up, including dismantling the existing unserviceable Holder complete all as specified and as directed.

S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified.Make Havells, Cat No: LHLDEUEBML8Z010 or equivalent in CG or Polycab.

S&F in repair Sheet Metal Enclosure MCB DB, SPN, 4-way with 200 Amp rated Bus-bar, 240 Volt, Double Doors with Magnitic Locking System and connecting up, complete all as specified and as directed.

S&F in repair Sheet Metal Enclosure MCB DB, SPN, 8-way with 200 Amp rated Bus-bar, 240 Volt, Double Doors with Magnitic Locking System and connecting up, complete all as specified and as directed.

S&F in repair Sheet Metal Enclosure MCB DB, TPN, 4-way with 200 Amp rated Bus-bar, 415 Volt, Double Doors with Magnitic Locking System and connecting up, complete all as specified and as directed.

S & F sheet metal enclosure MCB VTPN 6 way Double door Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labels With provision for 4 Pole MCCB 100 A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed.

S&F MCB Triple Pole & Neutral, ,415 Volt for fixing on MCB DB’s of capacity 40/60 Amp and connecting up, complete all as specified and as directed.

S&F MCB SPN, 6 to 32 Amp, 240 Volt for fixing on MCB DB’s and connecting up, complete all as specified and as directed.

S&F MCB SP, 6 to 32 Amp, 240 Volt for fixing on MCB DB’s and connecting up, complete all as specified and as directed.

S&F MCCB 4 Pole, ,415 Volt,63 to 100 Amps with breaking capacity 16 KA including taking down of old unserviceable MCCB complete all as specified and as directed.

Supply and fix in repair SPN Enclosure with 2 Pin and Earth Plug and Socket with 230/240 Volts, 20 Amp SPN MCB, complete all as specified and as directed.

S&F Wall mounted LED 18 Watt, Box type, (decorative) 230 Volt with extruted alumunum heat sink provided for efficent heat dissipation and integrated electronic driver, Connector Block, etc. complete with all Accessories internally pre-wired and necessary mounting Arrangements including LED Tube 18 Watt (4 feet), fixed on 2 No. PVC Block and connecting up with and including Copper Conductor Cable of size 23/0.193 multi-stranded, 3 Core from Ceiling Rose to Light Fitting, including dismantling the existing unserviceable fitting, complete all as specified and as directed.

S&F Ultra Bright LED Tube Light 18 Watts (with Output of 1800 Lumens) (Single Side Connection) with Very High Efficacy suited for installation in existing Tube Light G13 Lamp Holders to give Glare Free Light with necessary Wiring including taking up/ down old unserviceable Tube, disconnecting Choke, Starter etc from the Light Fitting, complete all as specified and as directed.

S & F wall mounted LED 10 watts, box type (decorative) mirror light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements and connection from ceiling rose to fitting including LED tube 2' x 10 watts complete including dismantling the existing unserviceable fitting, complete all as specified and as directed.

S&F Wall mounting decorative luminaires made out polycarbonate globe/frame, suitable for LED bulb and provision of LED Bulb 09/10 watts including taking up/ down old unserviceable Light Fitting, complete all as specified and as directed.

S&F Energy Saving new generation environmental friendly long life versatile pressure die cast aluminum, 15 Watt Security light fitting IP 66 Luminiare with high power LEDs as light source and electronic driver, Connector Block, etc. complete with all Accessories internally pre-wired and necessary mounting arrangements including connecting up with and, including fixing arrangements on Bracket made out of GI Pipe 32mm bore (dia), light grade 1.50 Metre long, bent to shape and fixing on Walls with suitable size Mild Steel Flat Iron Clamps, Bolts, nuts, etc. and connecting up with and including Copper Conductor Cable of size 0.5 Sqmm multi-stranded, 2 Core complete all as specified and as directed.

S&F Energy Saving new generation 10 Watt LED Bulk Head fitting IP 65 Luminiare with opal diffuser complete with all Accessories internally pre-wired and necessary mounting Arrangements including LED Lamp 10 Watt, and connecting up with and including Copper Conductor Cable of size 23/0.193 multi-stranded, 3 Core from Ceiling Rose to Light Fitting, including dismantling the existing unserviceable fitting, complete all as specified and as directed.

S&F Ceiling fan Capacitor 2/2.5/3.15 mfd, 230 Volt, AC, (as approved) as per site requirement heavy dutty with metal body, including necessary dismantling/taking out the unserviceable capacitor, complete all as specified and as directed.

Taking down/out unserviceable UG Cables of any Cross Sectional Area and Connections and joints including Pipes, Bricks, etc of any description laying in trenches or fixing with Walls/Poles, segreating serviceable Bricks/Precast covers, Pipes, Cables etc, and keep in safe custody for reuse, complete all as specified and as directed. NOTE: Earthwork will be measured and paid under appropriate Items.

Laying only LT UG XLPE cable of size 3.5coreX35sqmm laid in trenches/floors/on wall/service connections PVC insulated,sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal/cable gland as per site requirement including connecting to the main switches/ cut outs MCB/MCCB with neccesary lugs after cutting to required length of cable, complete all as specified and as directed. Note :- UG cable will be issued as Schedule 'B' free for fixing

All as per Item No. 68 here in before but for cable size 25sqmm 4 core complete all as specified and as directed.

All as per Item No. 68 here in before but for cable size 16sqmm 4 core complete all as specified and as directed.

Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 35 Sqmm 4.0 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed. NOTE : Earthwork, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items.

Excavation in Trenches not exc 1.50 Metre wide and not exc 1.50 METRE depth for laying of UG Cable/Pole/Stays etc getting out in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Leveling, Watering and Well Ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

S&F Sub-Class ‘B’ Brick, well burnt, laid breadthwise along the length of Cable laid in trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

M&L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after lay-ing the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE: For the purpose of Payment, Punned thickness of Sand Cushioning only shall be measured and paid for.

S&F Galvanised Iron Pipe 40mm bore (dia), Light grade as in protection of UG Cable laid in Trenches/fixing with Poles with Mild Steel Flat Iron Clamps, complete all as specified and as directed. NOTE: Cost of Mild Steel Clamp, Nuts, Bolts and painting is deemed to be included in the QUOTED UNIT RATE.

S&F 1100 Volts grade heavy duty Cable PVC insulated Aluminium Stranded Conductor of 10 Sqmm, served with inner sheathing of PVC sheathed in Service Connections suspended by Insulating Hangers not more than 1.0 Metre apart including 4.0mm Supension Wire, Twin Core Cable Flat or Circular including taking down old unserviceable Service Connection Cable, complete all as specified and as directed.

S & F 1100 volts grade PVC insulated stranded FRLSH Copper conductor Single core of 1.5 Sqmm, including taking down old unserviceable Conductor complete all as specified and directed .

S & F 1100 volts grade PVC insulated stranded FRLSH Copper conductor Single core of 2.5 Sqmm, including taking down old unserviceable Conductor complete all as specified and directed .

S & F 1100 volts grade PVC insulated stranded Flexible Copper conductor twin core of 1.5 Sqmm, including taking down old unserviceable Conductor complete all as specified and directed .

S & F PVC Square Box of Size 7'' x 4'' including replacement of old unserviceable one complete all as specified and directed.

S & F PVC Square Box of Size 8'' x 6'' including replacement of old unserviceable one complete all as specified and directed.

Supply only PVC wide Insulation Tape, complete all as specified and directed.

S & F Recess mounted Environmental friendly ,asthetically designed ,ultra modern 2X2 luminaire 28W with high brightness SMD LED as Light source,suitable for Armstrong /Grid ceiling , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including suitable LED Driver , complete all as specified and directed.Model:- PLUTO NEO PANEL 2X2 PLUTONEO2X2PLR28WLED840S , Make:-Havells or equivalent in CG and Polycab

S&F Decorative wall mounted name plate luminaire made out of metal/synthetic ,colour warm white,with 7W LED having Driver,and frame Dimension355x180x95 complete as per sample incl removal of old unsv fitting, complete all as specified and directed. Make:- Philips or Equivalent in Bajaj/Havells.

S&F LED Driver 36/40W ,DC out,incl taking down unsv light fitting, complete all as specified and directed. Make:- Philips/ Bajaj/Havells.

M&L Earthing complete with Galvanised Steel Earth Plate Electrode 600x600x6mm, buried directly in ground vertically to a depth not less than 2.25 Metre below ground level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal ground level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) ‘light grade’ upto 1.0 Metre above the Floor Level of Building where Main Switch/ DB situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150 mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded aggre gate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded aggregate), reinforced with 8.0mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) ‘medium grade’ including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including removal old existing unserviceable Earthing, complete all as specified and as directed.

United Traders

M/S Singha Enterprise