REPAIR REPLACEMENT OF FLOORING ROOFING CEILING JOINERY PLASTERING PLUMBING AND OTHER ALLIED WORKS TO OTM AND MD ACCN AT NARENDER NAGAR AND MUNI KI RETI UNDER AGE I RAIWALA

Amount

Demolition of brick work built in cement mortar in any description and position and removing debries out side of MOD land complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) ,complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specified and directed.

Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex (MOD land) complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, approns, kitchen plateform / shelves etc.Complete all as specified and directed

Removal of existing roof treatment i.e APP membrane, brick tiling incl mud mortar and open up RCC roof slab including picking, sweeping cleaning with wire brush and washing down with water to remove dust, dirt to get surface free of laitance , scales, oil or any other loose material complete all as specified and directed. Note :- The work is required to be carried out at non-accessible roof for Single/double storey . The contractor shall make arrangement of scoffolding, safety & security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items .

M&L 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) mixed with liquid water proofing compound (as per manufacture direction and paid separately) over and incl one coat of cement slurry admixed with & including acrylic bonding compound SBR Latex liquid polymer as to be used for bonding of new concrete/ mortar to old surface as per manufacturer direction and finishing the surface even and smooth(without using extra cement) as in roof padding /sunken floor to receive water proofing treatment complete all as specified and directed. Note :- The work is required to be carried out at non-accessible roof for Single/double storey . The contractor shall make arrangement of scoffolding, safety & security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items .

M&L of water proofing treatment to non-accessible roof slab with APP based modified polymeric membrane as per manufacturer’s instructions with following course of description below :- (a) Applying a priming coat of bituminious primer @ 0.30 Kg /Sqm, till the surface is properly impregnated. (b) Providing APP based 5 layer polymeric membrane minimum weighing 3.6Kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) centre core, laid on primed surface by forced applications as per the manufacturer's instructions with side over lap of 75 mm and end overlap of 100 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch ) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer (c) Apply two coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membrance Note:- 1. The work of water proofing treatment shall be got executed through authorised applicator of the manufacturer only and 10 year company back warranty to be submitted by contractor 2. The work is required to be carried out at non-accessible roof slab for Single/double storeyed. The contractor shall make arrangement of scaffolding, safety and security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items.)

M&L for Concrete angle-fillets provided with a radiaus of 75mm at junctions between roofs/chhajja and vertical faces of walls (parapet and other walls) to ease up about corners.with cement concrete 1:2:4 type B0(Using 12.5mm stone aggregate) mixed with liquid polymer as per manufacturer instruction including using form work (straight or curved) as required complete as per direction by Engr-in-Charge. (Note :- The work is required to be carried out upto double storeyed. The contractor shall make arrangement of scaffolding, safety and security of workers. The rates quoted shall deemed to be included for these items.)

M&L cement concrete 1:2:4 Type B0 (using 12.5 mm graded stone aggregate) as in lintels up to 1.5 m clear span , cills, steps, seismic and other similar bends / plingth course, copings, kneelers, bed plates, for foxing hold fast , top layer of RCC chhajja and similar work complete as per direction by Engr-in-Charge. Note: 1. The work is required to be carried out upto double storeyed. The contractor shall make arrangement of scaffolding, safety and security of workers. The rates quoted shall deemed to be included for these items.)

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each & removing from site complete all as specified & directed.

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each & removing from site complete all as specified & directed.

Refixing of shutters in same opening of any descrption after easing and adjusting , n exc 1.50 Sqm complete all as specified & directed.

Refixing of shutters in same opening of any descrption after easing and adjusting , exc 1.00 Sqm but n exc 2.00 Sqm complete all as specified & directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each & removing from site complete all as specified & directed.

S&F 125mm X 65mm double Rebate Factory made 100 % Solid WPC door Frame made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification. The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity complete all as specified & directed. Make:- ENCHON (Kumar Arch Tech Pvt Ltd)/FLORESTA/ARCHIDPLY

S&F 100mm X 65mm single Rebate Factory made 100 % Solid WPC door Frame made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification. The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity. Make:- ENCHON (Kumar Arch Tech Pvt Ltd)/FLORESTA/ARCHIDPLY

S&F Factory made single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flameof Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed. Note:- stainless steel butt hinges shall be measured & paid separately under relivent item of Sch A. Make:- ENCHON (Kumar Arch Tech Pvt Ltd)/FLORESTA/ARCHIDPLY

S&F 30 mm Thick factory made wire mesh solid PVC door shutters Consisting of frame made out of M.S tube of 19 guage thickness and size of 19 mm x 19 mm for stiles and 15 mm x 15 mm for top, lock & bottom rail. M.S frame shall have a coat of metal primer of approved make and manufacture. 19 mm x 19 mm M.S square tubes shall be covered with 5 mm thick pvc heat molded (100% lead free) plain sheet 'c' channel 75 x 30 x 60 out of 10 mm shall be heat at 90 deg. towards inner site of both site of both face of the door forming stiles for top, bottom, lock rails shall be fitting of 10 m site. all rails (T,B lock) shall be in covered with 100mm wide PVC sheet including S.S wire mesh shall be fixed with 15 x 15 square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove of fix again after changing of wire mesh when needed complete all as specified & directed. Note- (i) Rate of stainless steel wire mesh is included in the item & the wire gauge shall be streched to tighten firmly complete all as per specification and drawing. Make:- ENCHON (Kumar Arch Tech Pvt Ltd)/FLORESTA/ARCHIDPLY

S&F factory made solid panel PVC window shutter 30 mm thick (style) but fully glazed ie glass pane used instead of 5 mm single side prelam PVC sheet panels, shutter frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side solvent cement for stiles and single side prelame PVC sheet for top and bottom rail on either side and as gap insert for top rail and bottom rail glass pane to be fittted with suitable PVC sheet beading complete all as specified & directed. Note:-(i) The cost of Glazing is included in this item. Make:- ENCHON (Kumar Arch Tech Pvt Ltd)/FLORESTA/ARCHIDPLY

S&F factory made solid panel PVC window shutter 30 mm single side (style) but wire gauzed ie wire gauzed will be used instead of 5 mm single side prelam pvc sheet panel shutter frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side solvent cement for stiles and single side prelame PVC sheet for top and bottom rail on either side and as gap insert for top rail and bottom rail the tube and this tube shall be welded to ms tubes including S.S wire mesh shall be fixed with 15 x 15 square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove of fix again after changing of wire mesh when needed complete all as specified & directed. Note- Rate of stainless steel wire mesh is included in the item.The wire gauge shall be streched to tighten firmly complete all as per specification and drawing. Make:- ENCHON (Kumar Arch Tech Pvt Ltd)/FLORESTA/ARCHIDPLY

Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 3 Sq.cm and not exceeding 6 Sq.cm, square, bull nosed,splayed, champhered, moulded or rounded one eadge or face, wrought secured with nails complete all as specified & directed.

S&F Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified & directed.

S & F for Aluminium anodized barrel tower bolt of 12 mm dia and 125 mm length of extruded section (ISI Marked) complete all as specified and directed

S & F in repair for Aluminium anodized barrel tower bolt of 12 mm dia and 125 mm length of extruded section (ISI Marked) complete all as specified and directed

S & F for Aluminium anodized barrel tower bolt of 12 mm dia and 200 mm length of extruded section (ISI Marked) complete all as specified and directed

S & F in repair for Aluminium anodized barrel tower bolt of 12 mm dia and 200 mm length of extruded section (ISI Marked) complete all as specified and directed

S&F Aluminium alloy anodised sliding door bolt, of size 16 mm dia and 300mm long , with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections (ISI Marked) and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy complete all as specified and directed.

S&F in repair Aluminium alloy anodised sliding door bolt, of size 16 mm dia and 300mm long , with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections (ISI Marked) and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy complete all as specified and directed.

S&F Stainless steel butt hinges of size 100mm (ISI Marked) complete all as specified and directed.

S&F in repair 100 mm mild steel butt hinges , medium weight, cold rolled mild steel complete all as specified and directed.

S&F for Extruded Aluminium alloy handles, fabricated type, anodised 125 mm long, (ISI Marked) complete all as specified and directed.

S&F in repair for Extruded Aluminium alloy handles, fabricated type, anodised 125 mm long, (ISI Marked) complete all as specified and directed.

S&F for Extruded Aluminium alloy handles, fabricated type, anodised 150 mm long, (ISI Marked) complete all as specified and directed.

S&F in repair for Extruded Aluminium alloy handles, fabricated type, anodised 150 mm long, (ISI Marked) complete all as specified and directed.

S & F of aluminium door seal upto 1000 mm long on bottom of door fixed with nails complete all as specified and directed.

S&F 300 mm , MS ordinary rat tail rod pattern springs including roller and plate , door spring fixed to door shutter complete

S&F aluminium peg set of 6 pegs, 300 mm long, complete all as specified & directed.

S&F Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified & directed.

S&F Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads or from metal frames including punching or drilling out old glazing pins /spring clips and providing and fixing new one complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises from MoD all as specified and directed.

M&L for coloured vitrified tiles of any design and pattern, 600x600x9 to 10mm thick, as in floor & skirting etc Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B1b with average water absorption between 0.08% to 3%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 4.0% (Max deviation). Centre & Edge curvature and warpage + 0.20% (Max Deviation). Breaking strength 1200 N (Minimum) and minimum 95% tiles shall be free from visible defects. Note: Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I)

M&L cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) 75 mm thick as in plinth protection surface finished even and smooth without using extra cement including 12 mm thick joint up to full thickness and filled with pre-formed bitiuminous fillar complete all as specified and directed.

M & L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing /footpath complete all as specified and directed.

M&L Chequered cement concrete tiles(ISI MARKED) of size 30cmx30cm x25mm thick with rubberised polish , set jointed and pointed in neat cement slurry with grey cement and pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

S & F in repairs 15 mm bore fancy type Stop valves, chromimum plated with long shank and cup (concealed type) (ISI Marked) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified & directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site.

S & F in repairs 15 mm bore chromium plated bib taps long body ,cast copper alloy, with crutch or butterfly handle,(ISI Marked) screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site.

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, (ISI Marked) screwed for iron pipe complete all as specified & directed.Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site.

S&F brass chromium plated towel Rail 20 mm dia, D-type, 600 mm long fixed with and including Chromimum plated brass screws and wooden plastic cleats complete all as specified & directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site.

S&F in repairs (ISI Marked) Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified & directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site.

S&F for PVC Connections 15mm size with PTMT nuts of length 600 mm (ISI Marked) complete all as specified & directed.

S&F in repair Wash basin of size 550x400mm vitreous china (flat back type) any size (ISI Marked) incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings complete all as specified & directed.

S&F in repairs 10 liter capacity PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and flush pipe suitable for indian Type WC of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified & directed.

S&F in repairs Vitreous china Squatting pan , 'Orissa pattern, (ISI Marked) of size 580x440 mm white, with integral foot rest excluding flushing cistern and flush pipe including connection to trap, to flushing pipe and anti-syphonage pipe, etc complete including making good to floor complete all as specified & directed.

S&F 32 mm dia low density polyethylene pipe (LDPE) of pressure rating @ 6Kgf per Cm Square fixed to walls, ceilings or in floors etc complete all as specified & directed.

M&L rendering 5 mm thick in CM 1:3 in ceiling / Chhajja's finished even and smooth (without using extra cement)

M&L Rendering 15 mm thick on fair faces of brick work or concrete walls internal surfaces in CM 1:6 finished to even & smooth without using extra cement complete all as specified & directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete walls external surfaces in CM 1:4 mixed with integral water proofing compound finished to even & smooth without using extra cement complete all as specified & directed. Note :- Integral water proofing liquid will be measured and paid seperately.

Supply only water proofing compound complete all as specified & directed.

M&L for preparation of new surface plastered or unplastered and applying three coat of white wash on ceiling complete all as specified and as directed.

M&L for new surface plastered or unplastered and applying two coat of distemper acrylic emulsion white or tinted over and incl of one coat of alkali resistance priming paint on wall surface complete all as specified and directed

M&L for preparation of new surface plastered or unplastered and applying two coat of cement base paint white or tinted over and incl of one coat of alkali resistance priming paint on wall surface complete all as specified and directed

ACE BUILDERS AND CONTRACTORS