SPL REPAIR TO CERTAIN BLDGS AND PROVN OF LBCW WORK AT BONIYAR AND URI UNDER GE 969 EWS

Amount

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.

(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board

(c) One 3 pin 5 Amp switch socket outlet on same board with accessories

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.

S&F Modular socket 6A - 2/3 pin combined 2 module, 2 in 1, 3 pin, complete all as specified and as directed.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

S&F switch piano Flush type, single pole, 16 amp 240 volts, complete all as specified and as directed.

S&F Modular socket 6A/16A - 2/3 pin combined 2 module, 2 in 1, 3 pin, 16 Amps complete all as specified and as directed.

S&F in repairs Bell electric, Ding Dong AC 230 Volts, single pole complete all as specified and as directed.

S&F in repairs Modular Bell Push 6 Amp, One module complete all as specified and as directed.

Supply and fixing round/square shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F LED fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified and as directed.

S&F in repairs lamp Holder, PVC/Polycarbonate type with black plate suitable for batten fitting complete all as specified and as directed.

S&F ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and as directed.

S&F 1100 V grade heavy duty U/G cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed one twin core cable flat or circular of size 16 sqmm X 2 Core complete all as specified and as directed.

S&F wall mounted fan complete with voltage 230V, 50 Hz, RPM 1200, Copper winding of swing 400mm, 3 speed control complete all as specified and as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 150/200/250mm complete all as specified and as directed.

S&F in replacement LED Mirror Light 10W, Decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, suitable for surface mounting on a ceiling or wall complete all as specified and as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F in repairs MCB, SPN 40 to 63 Amps rating 240 Volts 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed.

S&F in repairs MCB, SP 6-32 Amps 240 Volts B curve, complete all as specified and as directed.

S&F LED inverter Bulb 12 Watt.

S&F Bulkhead luminaire comprising of high brightness LEDs 9/10W LED, IP-65/66 complete all as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc

Dismantling of plain or corrugated steel sheeting any guage , thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed.

S&F for Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.

M&L in repair Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangle) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat grey cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick screed bed in CM 1:4 and dismantling old floor hearth or wall tile complete all as specified and as directed.

S&F glazed ceramic tiles in vertical surface 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4) complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc incl screed bed 15mm thick in CM (1:6),complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc complete all as specified and as directed.

M&L for 18 to 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, cooking plat forms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

M&L for 12mm Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12 mmt thick in CM (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick Cement Concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 25mm thick (20mm graded aggregate) as in floors etc complete all as specified and as directed.

M&L for cement concrete 1:3:6 Type C-2 (using 40 mm graded stone aggregate) as in foundation filling or mass concrete complete all as specified and as directed.

S&F for Steel work in tubular trusses, as in gate, post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work of size (605 x 605)mm for false ceiling, complete all as specified and as directed.

S&F Non asbestos fibre cement building boards fixed or laid/inserted to timber/Gl/Aluminium framework with screws fixed in ceiling flat or sloping etc complete all as specified and directed.

S&F wooden wall panelling / ceiling with tongued & grooved joint laminated over high quality DHF 8 to 10mm thick fixed to timber frame work of soft wood 75mm x 50mm @ 600 mm c/c on both sides, complete all as specified and as directed. Note : The rate quoted shall be included timber frame work & biding as per required all as directed by Engr-in-Charge.

M&L in 4mm thick pinewood veneers, fixed with nails to timber frame work on wall or ceiling of soft wood 75mm x 50mm @ 600 mm c/c on both sides, complete all as specified and as directed. Note : The rate quoted shall be included timber frame work & biding as per required all as directed by Engr-in-Charge.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed.

M&L for 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type,fixed with screws to timber frame work, complete all as specified and as directed.

M&L for 0.9mm thick Decorative laminate type 1 of surface finish colour and pattern as approved, fixed with approved adhesive as per manufacturer instructions.

S&F 40mm dia cup board knobs fixed with nut and washers of mild steel bright finish complete all as specified and as directed.

S&F Mortice lock vertical type mild steel 4 lever 100mm fixed in repair, complete all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and as directed.

Dismantling structural steel as in gate door but excluding framed work etc, complete all as specified and as directed.

Dismantling of timber scantlings 40 sqcm and over in section in any position framed work, complete all as specified and as directed.

M&L for second class soft wood (kail) clean swan timber fixed in scantling, complete all as specified and as directed.

Dismantling of timber fillets rails posts, rafters,purlins, etc. under 40 sq. cm in section in any position framed work complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm and not exc 13 Sqcm complete all as specified and as directed.

Dismantling of boarding any description fixed in any position with nails.

M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and as directed.

All as per above item No. 61 but except boarding complete all as specified and as directed. (Note : Serviceable boarding obtained from ser item No. 60 Here in before to be used).

Taking down chowkats with shutters (without taking off shutters from the frame) n exc 1.5 Sqm but exc 4 Sqm Each complete all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm Each complete all as specified and as directed.

S&F for Pressed steel frames for doors size of frame 105x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

S&F 2nd class hard wood plain soild, straight chowkats and frame wrought, framed rebated on soild, rounded or chamfered, put together with pinned at joints complete all as specified and directed.

S&F 35mm thick,2nd class hardwood,Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkhats, complete all as specified and directed.

M&L Single side prelam 1.5mm thick PVC sheet fixed or laid on to flush doors by using rubber based adhesive, supplying and fixing at site as per specification.

S&F 35 mm thick, 2nd class hardwood, plain, framed, pannelled shutters (any number of pannel) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face venner; supplied and fitted to chowkats, complete all as specified and as directed.

S&F 35mm thick 2nd class hardwood glazed & skeleton shutter open rebated and prepared to receive gauge etc (without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc and fitted to chowkhats, complete all as specified and as directed.

S&F Powder coated aluminium sliding windows frame with movable shutters (sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50mm thick glass & stainless steel wire mesh fixed with neoprane rubber gasket with aluminium beading clips, frame made with aluminium section as appended below :- (a) Window Frame - 65mmx35mmx1.48mm thick for two tracks. (b) Top/Bottom rail and style/rail of shutter - 19mmx38mmx1.48mm thick and over (c) Aluminium beading /clips - 0.7mm thick (d) Stainless Steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (e) Aluminium fittings such aluminium suitable handle with auto interlocking closing. (f) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

MS Cold rolled butt hinges medium weight 100mm long complete all as specified.

MS Cold rolled butt hinges medium weight 75mm long complete all as specified.

S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all specified and as directed.

S&F 200mm long Anodised Aluminium tower bolt all as specified and as directed.

S&F 150mm long extruded aluminium alloy handle

S&F Galvanised mild steel wire cloth 0.46mm nominal dia of wire and width of aperture 1.18mm and fixed with tinned tacks ro galvanised wire stapple, complete all as specified and as directed.

S&F Sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5sqm in each pane 3mm thick complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins arches, pillars, complete all as specified and as directed.

Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) as in manholes and repairs, complete all as specified and as directed.

M&L for walling or random rubble, uncoursed well bounded bedded and solidly hearted, built in cement mortar (1.6) Complete all as specified and as directed.

M&L Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete all as specified and directed.

M&L Rendering 15 mm thick on stone walling surfaces finished even and smooth with using extra cement in cement mortar (1:4) complete all as specified and as directed.

M&L rendering 15 mm thick plaster in CM (1:6) on brick/concrete surface of walls, finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for 20 mm thick cement plaster in cement mortar (1:4) with WPC @ 2% by weight of cement or as per manufacturer instruction on fair faces of brick work finished even and fair without using extra cement (WPC will be measured and paid separately)

Supply only integral water proofing compound (ISI marked) of approved brand, complete all as specified and as directed.

Dismantling of CI or reinforced concrete/PVC/drain pipe internal dia 100/75mm, jointed in CM and taking out of trenches if required complete all as specified and as directed.

S&F PVC (SWR) pipe 110mm bore single in any type with rubber ring joint laid in wall/trenches/ floor.

S & F PVC (SWR) pipe 75 mm bore single in any type with rubber ring joint laid in wall/trenches/ floor.

S & F PVC (SWR) bend any radius 110mm bore

S & F PVC (SWR) bend any radius 75 mm bore

S & F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement as fixed in repairs complete all as specified and as directed.

S & F PVC (SWR) reducers 75/110mm bore

S&F 100mm Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F PVC (SWR) 110mm Junction single (single T) equal or unequal.

S&F 75mm bore Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F PVC (SWR) 75mm dia vent cowl complete all as specified.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm plate with integral foot rests (excluding flushing cistern and flush pipe) including 'S' or 'P' trap and cement concrete bedding complete all as specified and as directed.

S&F PVC valveless, syphonic action type, flushing cistern 10 ltrs, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and as directed.

S&F Vitreous China, semi-pedestal pattern (Anglo-Indian type) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc complete including making good to floor including concrete, seat and cover for pedestal pan 2 Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cister, complete all as specified and as directed.

S&F in repairs vitreous china one piece wash down water closet pan ( Pedestal pattern) including flushing cistern, seat cover and all necessary fittings, white complete all as specified and as directed.

S&F in repairs Vanity wash hand basin with modular cabinet (floor mounted), white/coloured, flat black size 66x45x83 cm complete all as specified and as directed.

S&F in repairs table mounted China Ware Wash hand basin complete all as specified and as directed. Make : Jaguar Cat Part No JDS-WHT-540 or equivalent in Cera, Hindware complete all as specified and as directed.

S&F in repair 32 mm Waste coupling of PTMT (half or full threaded) complete all as specified and as directed. (Minimum weight 32mm 45gms/40mm-60 gms)

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repair 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed.

S&F for chromium plated bib taps, cast copper alloy, fancy type with capstan head, crutch and butterfly handle chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15/20mm dia bore, fixed as in repair, complete all as specified and as directed.

S&F angular stop valves , cast copper alloy, screwed down high pressure, fancy type with crunch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions, or for 15mm dia bore, fixed as in repairs, complete all as specified and directed.

S&F in repairs pillar taps, cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe and fixed, complete all as specified and as directed.

S&F chromium plated shower rose 125mm dia with swivel joints, fixed in repairs, complete all as specified and as directed.

S&F towel rail 600 mm long (between flanges), 20mm dia, ‘D’ type, chromium plated brass, fixed to walls with screws and plastic cleats, fixed as in repairs, complete all as specified and directed.

S&F in repair looking mirror of size 1500 x 600mm, 5.5mm thick duly surrounded by terak wood beading and 6mm thick back ply fixed with suitable arrangement etc, complete all as specified and as directed.

S&F PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long, suitable for 15mm dia bore pipe, fixed as in repairs, complete all as specified and directed.

S&F grating square (SLIT) 150mm size, of PTMT (Openable), fixed as in repairs, complete all as specified and as directed.

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe (min wt 40gms) complete all as specified.

S&Fin repair Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs With chromium plated brass screws complete all as specified and as directed.

Taking up or down 15mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

M&L galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 15 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and as directed.

M&L galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 20 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and as directed.

S&F in repair, Stainless Steel curtain rails 25mm dia including brackets etc, complete all as specified and as directed.

Dismantling water tanks exc 500 and n. exc 1000 ltr and removing to store, complete all as specified and as directed.

M&L for rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position of 1000 ltrs capacity, complete all as specified and as directed.

Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer, complete all as specified and as directed.

Preparation of Old painted surface wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint), complete all as specified and as directed.

M&L for preparation of new painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic varnish all as specified. Complete all as specified and station policy or directed by engr-in-charge.

Preparation of old painted steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and as directed.

Preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and as directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of cement based paint and removal of rubbish off the premises upto a distance not exceeding 50 metres, complete all as specified and as directed.

M&L preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint, and removal of rubbish off the premises upto a distance not exceeding 50 metres, complete all as specified and as directed.

Repair to portion of pressed steel frame chowkhat near to floor of approx 0.4 Mtr in length with provn of angle iron and prested steel frame as per shape, all as specified and as directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.50 m in depth & getting out in Hard/ Dense soil, complete all as specified and as directed.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4) complete all as specified and as directed.

Providing, cement concrete Type B-0 1:2:4 (12.5mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Extra over stone walling for hammer dressing to face of stones and dressing of face beds and joints, as specified of random rubble walling uncoursed or brought upto courses with maximum depression on face from stragith edge held against the dressed surface n exc 20 mm on lime or sand stone, complete all as specified and as directed.

M&L for bore of pipe in 450mm Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and as directed.

M&L for 150mm Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and as directed.

Removal of excavated material (soil) n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

Note:- Schedule of credit Rs 47,750.95 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/s ABDUL QAYOOM LONE & BROS (BID ID -3155415)

M/S GHULAM RASOOL LONE (BID ID -3155651)

M/S SUMJI BROTHERS (BID ID -3155474)

M/S KULBIR SINGH SODHI AND CO (BID ID -3155826)

M/s Mohammad Shafi Malik (BID ID -3155748)

M/S ESS EMM ENTERPRISES (BID ID -3155585)

M/S MANZOOR AHMAD YATOO (BID ID -3155761)