25/2022-23(EDCR) Shifting of 11 KV HT line and LT Line with 02 Nos 63 kva DP mounted S/S at Vill Temra, Rampur under Jurisdiction of EDD-Bilaspur, Rampur.

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

8.5 Mtr long PCC Pole.

11 Mtr Long ST pole

11 KV XLPE Cable 3*185sqmm

GI wire 6/8 Swg

other line material such as X-arm, Cable Jointing kit etc.

ACSR Rabbit conductor

TPMO Set

old & used ACSR weasel rusted as scrap form site to store

Old & used PCC pole broken form site to store

ST Ple old and used 9 mtr Scrap 4 nos form site to store

ST Ple old and used 11 mtr Scrap 4 nos form site to store

Rail pole old and used Scrap 2 nos form site to store

Pin, X arm angle, Tee of Channel etc, Iron Scrap form site to store

a) Single support Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

8.5 Mtr long PCC Pole

11 Mtr long ST pole

b) Double pole structure Excavation of foundation pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole)Erection of support(pole) complete with providing and fixing of all clamps made of MS flat of size 75x8 mm. an other accessories . The work includes fabrication work and fixing of cross bracing sets 3.5 Mtr from MS Angle 65x65x6 mm/50x50x6 mm. The work includes cutting holes and providing MS Bolts of 16x40 mm size in the middle of the cross bracing with 1 No. sparing washer of proper size.

8.5 Mtr long PCC Pole

11 Mtr long ST pole

b) Tri pole structure Excavation of foundation pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole)Erection of support(pole) complete with providing and fixing of all clamps made of MS flat of size 75x8 mm. an other accessories . The work includes fabrication work and fixing of cross bracing sets 3.5 Mtr from MS Angle 65x65x6 mm/50x50x6 mm. The work includes cutting holes and providing MS Bolts of 16x40 mm size in the middle of the cross bracing with 1 No. sparing washer of proper size.

8.5 Mtr long PCC Pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support

8.5 Mtr long PCC Pole

11 Mtr long ST pole

b) Double pole structure

8.5 Mtr long PCC Pole

11 Mtr long ST pole

c) Tri pole structure

8.5 Mtr long PCC Pole

Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs

Fixing of 11 KV Pin Insulator with Pin as per direction of Supervising Engineer.

Fixing of 11 KV Disc Insulator with fitting as per direction of Supervising Engineer.

Dismantaling of old LT/HT line with DP

Replacement and installation of Transformer 63 KVA from old DP to New DP

Digging and laying, sagging, 11 KV XLPE (underground)(Double ckt cable) cable 3*185sqmm with the help of cable jointing kit and brick & sand etc. as per RESPO Norms and as per direction of Supervising Engineer.

Road restroation charges for pucca road crossing

Road restroation charges for foothpath side

Laying, sagging, stringing and binding etc of ACSR Rabbit Conductor with jointing sleeves as per RESPO Norms and as per direction of Supervising Engineer.

Installation of 11 KV TPMO set including making connection etc.

Gaurding of 11 KV line Span as per direction of Supervising Engineer.

Providing and laying of HDPE pipe underground as per direction of Supervising Engineer.

Providing and fixing of Danger board with clampas per direction of Supervising Engineer.

Providing and fixing of number plate per direction of Supervising Engineer.

Providing Stone Pad 300*300*75 MM.

Providing Barbed wire

Providing AL Tape

Providing AL Binding wire

Providing PG Clamp

Providing X-Arm holding Clamp with nut & bolts

Providing F Brackets with nuts and Bolts

Providing Clamp with nuts and Bolts

M/S RAHAT & BROTHERS ELECTRICALS

M/s Charley Enterprises