Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹62.8 LAccepted-AOC HIMACHAL PRADESH HP | HAMIRPUR | HIMACHAL PRADESH | 174304 | L1 | Accepted-AOC qualified | |
| 2 | L2₹65.7 L+₹2.9 L (4.57%)Rejected-AOC | L2 | Rejected-AOC qualified | |
| 3 | L3₹69.7 L+₹6.9 L (10.9%)Rejected-AOC | L3 | Rejected-AOC qualified | |
| 4 | L4₹70.5 L+₹7.8 L (12.4%)Rejected-AOC | L4 | Rejected-AOC qualified |
Tender Value
₹52.0 L
EMD Value
₹84,500
Closing Date
2 Mar 2022, 4:00 pmClosed
Executive Engineer
Nurpur Division, HP PWD., Nurpur
Const.of Toilet block
2022_PWD_57077_2
No.PWN/GA/E-27/21-22-6008-12 dt.24/2/22
Open Tender
Civil Works - Buildings
Item Rate
365 days
Nurpur
Please refer Tender documents.
5 documents required · 5 mandatory
₹2,000
₹84,500
2 Aug 2022
22 Feb 2022
3 Mar 2022
22 Feb 2022
2 Mar 2022
22 Feb 2022
22 Feb 2022 - 2 Mar 2022
Amount
Excavation in foundation, trenches etcetera in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work . jumper blasting work , soft and hard blasting and doing work in saturated soil including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering and pumping or bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including slush which may arise during dewatering removal of slush and stacking the serviceable and unserviceable material clear from the edges of excavation as directed by the Engineer-in-charge and then returning the stacked soil in 15 cm ( fifteen centimeters ) layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed by Engineer in charge within all leads and lifts disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts and other incidental charges
Excavation in drains and channels etcetera in all kinds of classification of soil such as pick work, pick jumper work, blasting work , hard blasting or any other mixed classification of soil including chiseling or wedging out rock where blasting is prohibited or any other mixed variety of soil including shoring, strutting dewatering and pumping or bailing out water(surface and sub soil water) upto any depth or any quantum of water including removal of slush which may arise during dewatering, including dressing of sides and bed and disposing of all excavated earth in all leads and lifts. Disposed earth to be leveled and neatly dressed as directed by the Engineer-in-charge including carriage of materials within all leads and lifts and other incidental charges.
Filling in plinth with sand under floors including watering, ramming ,consolidating and dressing complete as directed by the Engineer-in Charge including carriage of materials within all leads , lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etc. and mass concrete etcetera including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetera upto any thickness upto all floor level including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels sides and soffits of beams, beam haunching, cantilevers, girders, bressumers and lintels in any heights / thickness/depths etcetera upto all floor level including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in columns, pillars, posts and struts ( square rectangular or polygonal in plan ) in any heights / thickness/depths etcetera upto all floor level including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls of any width etcetera upto all floor level including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and laying cement concrete 1:6:12 (one cement; six sand twelve graded /crushed stone aggregate 40mm(forty millimeters) nominal size mixed and vibrated mechanically and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads ,lifts and other incidentals charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and laying cement concrete 1:4:8 (one cement; four sand : eight graded /crushed stone aggregate 40mm(forty millimeters) nominal size mixed and vibrated mechanically and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads, lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Boulder filling dry hand packed tightly under floor including watering, ramming ,consolidating and dressing complete as directed by the Engineer-in Charge including carriage of materials within all leads , lifts and other incidental charges.. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6(one cement: six sand) and curing complete including carriage of materials within all leads , lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and laying cement concrete 1:2: 4 (one cement; two sand :four graded /crushed stone aggregate 20mm (twenty millimeter) nominal size) mixed and vibrated mechanically so as to give a compressive strength corresponding to grade M-20(M-twenty) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation , footings, basis of colums etcetera . and the like and mass concrete including carriage of materials within all leads and lifts other incidental charges . The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and laying cement concrete 1:2: 4 (one cement; two sand four graded /crushed stone aggregate 20mm (twenty millimeter) nominal size) mixed and vibrated mechanically so as to give a compressive strength corresponding to grade M-20(M-twenty) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landing and shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depths/ thickness etc. up to all floor level including carriage of materials within all leads , lifts and other incidental charges . The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and laying cement concrete 1:2: 4 (one cement; two sand four graded /crushed stone aggregate 20mm (twenty millimeter) nominal size) mixed and vibrated mechanically so as to give a compressive strength corresponding to grade M-20(M-twenty) to give smooth and even surface including centring and shuttering but excluding cost of reinforcement in moulding as in cornic, window sill etcetera in all girth pths / thickness up to all floor level including carriage of materials within all leads, lift and other incidental charges . The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and laying cement concrete 1:2: 4 (one cement; two sand four graded /crushed stone aggregate 20mm (twenty millimeter) nominal size mixed and vibrated mechanically so as to give a compressive strength corresponding to grade M-20(M-twenty) to give smooth and even surface including centering and shuttering but excluding the cost of reinforcement in mouldings as in cornices, windows sill etcetera in all girth and curing complete in all floors including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and laying cement concrete 1:2: 4 (one cement; two sand four graded /crushed stone aggregate 20mm (twenty millimeter) nominal size mixed and vibrated mechanically so as to give a compressive strength corresponding to grade M-20(M-twenty) in reinforced concrete chajjas of any thickness upto all floor level including finishing the exposed surface with cement mortar 1:3 ( one cement: three sand ) to give a smooth and even surface including the form work and curing complete upto all floors and carriage of materials within all leads and lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and laying mild/ tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all heights including cost of binding wire and carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and laying damp proof course 100mm (one hundred millimeters ) thick with cement concrete 1:2: 4 (one cement; two sand four graded /crushed stone aggregate 12.5mm (twenty point five millimeter) nominal size mixed and vibrated mechanically including the form work and curing complete including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Applying a coat of hot bitumen ( mexphalt 80/100 (eighty / hundred ) or equivalent using 1.70 kg. ( one point seven zero kilogramme ) per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Brick masonry using second class common burnt clay building bricks in super structure above plinth level in all heights / floor level in cement mortar 1;6( one cement; six sand)and curing complete including carriage of materials within all leads, lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Half brick masonry using second class common burnt clay building bricks in super structures above plinth level upto all floor level in cement mortar 1: 4( one cement; four sand)and curing complete including carriage of materials within all leads ,lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing coloured anodized aluminium frames for door, window, ventilators and partitions with aluminium extrusion sections (No 14081) 127X44.45X3.00mm ( one hundred twenty seven into forty four point four five into three millimeters ) of Jindal / Hindalco aluminium or its equivalent as per approved shade with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodized transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etcetera aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/ panelling C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-In-Charge. complete including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing coloured anodized aluminum shutters for door, window, ventilators and partitions with aluminium extrusion section ( No. 4524 and 4526 ) 101X44.45X3.00mm ( one hundred one into fourty forty point four five into three millimeters ) of Jindal / Hindalco aluminium or its equivalent as per approved shade with extruded built standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodized transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera . Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing /paneling C.P. brass/ stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For shutters of doors Styles of main door top rail and side style no 19509 size 85.00x44.45x3.00mm ( eighty five into forty four point four five into three millimeter ) lock and bottom rail No. 19596 size 150.00x44.45x3.00mm ( one hundred fifty into forty four point four five into three millimeter ) meeting style no 19518 size 53.70x44.45x3.00mm ( fifty three point seven zero into forty four point forty five into three millimeter )Glazing plate and channel no 19353 size 44.45x5.72x3.00mm. ( forty four point four five into five point seven two into three millimeter )Styles of internal Door Top rail and side style no 19508 size 83.50x44.45x3.00mm ( eighty three point five zero into forty four point four five into three millimeter ) lock and bottom rail No 19596 size 150.00 x44.45x3.00mm ( one hundred fifty into forty four point four five into three millimeter ) meeting style no 19509 size 85.00x44.45x3.00mm . ( eighty five into forty four point four five into three millimeter ) Styles of window and vents style no 19508 size 83.50x44.45x3.00mm ( eighty three point five zero into forty four point four five into three millimeter ) channel and rebate no 19649 size 38.10x12.00x2.50mm ( thirty eight point ten into twelve into two point five millimeter ) Shash bar no 20006 size44.45x25x2.40mm ( forty four point four five into twenty five into two point four millimeter ) Bead no19377 of Jindal / Hindalco including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) and carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing hard drawn aluminum wire fabric 75x 25 mm( seventy five into twenty five millimeter )mesh of weight 7.75 kg ( seven point seven five kilograms) per square meter to window frames including 60x20mm ( sixty into twenty millimeters ) bedding complete including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 8mm (eight millimeter ) thick aluminum grill anodized powder coated pattern to existing window /ventilator with 80mmx80mm ( eighty millimeters into eighty millimeter ) panels holes with 25x8mm ( twenty five into eight millimeter ) thick aluminum flat in windows and ventilators including fixing with aluminum screws or bolts and nuts complete in aluminum channels base frames (Aluminum channels base frames to be measured and paid for separately) complete including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing to existing door frames, 30mm (thirty millimeters ) thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 (nineteen ) gauge thickness and size of 19mm x19mm ( nineteen millimeters into nineteen millimeters ) for styles and 15mmx15mm ( fifteen millimeters into fifteen millimeters ) for top and bottom rails, ( Code no 9.120 ) of Rajshri M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm ( five millimeter ) thick heat moulded PVC "C" channel of size 30mm (thirty millimeters ) thickness, 70mm ( seventy millimeters ) width out of which 50mm ( fifty millimeters ) shall be flat and 20mm ( twenty millimeters ) shall be tappred in 45 (forty five ) degree angle on either side forming style and 5mm ( five millimeter ) thick, 95mm ( ninety five millimeters ) wide, PVC sheet out of which 75mm ( seventy five millimeters ) shall be flat and 20mm ( twenty millimeters ) shall be tapered in 45 (forty five ) degree on the inner side to form top and bottom rail and 115mm ( one hundred fifteen millimeters ) wide PVC sheet out of which 75mm ( seventy five millimeters ) shall be flat and 20mm ( twenty millimeters ) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (ten millimeters ) thick, 20mm ( twenty millimeters ) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm ( five millimeters ) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style and rails, joints mitred and jointed with solvent cement adhesive including fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm ( one hundred into fifty into one point nine millimeters ) size with necessary screws etcetera complete including carriage of materials within all leads, lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing glazing with glass panes of 4mm ( four millimeter ) thickness of modi guard / Sanit gobain (weight not less than 10.00 kg/sqm. ( ten kilogramme per square meter ) in aluminium door, windows, ventilators shutters and partitions etcetera with PVC / neoprene gasket etcetera complete as per architectural drawings and the directions of Engineer in charge including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing 4 mm ( four millimeter ) thick frosted glass panes of modi guard / Sanit gobain ( weight not less than 10.00 kg/ sqm ( ten kilograme per square meter ) in aluminium doors , windows. Ventilators shutters PVC/ neroprne gasket etcerta complete as per architectural drawings and the directions of Engineer in charge including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing anodized aluminum sliding doors bolts,(anodized transparent or dyed to required colour and shade with bolts and nuts/screws etcetera . complete including carriage of materials with in all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government (a) 300 x 16mm (three hundred into sixteen millimeter.)
Providing and fixing anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with bolts and nuts/screws etcetera . complete including carriage of materials with in all leads and lifts The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government. a) 200 x 10mm (two hundred into ten millimeter. )
b ) 150 x 10mm (one hundred fifty into ten) millimeter
Providing and fixing aluminum handle anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including carriage of materials with in all leads and lifts The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government a) 125mm (one hundred twenty five millimeter ).
b) 100mm (one hundred millimeter.
Providing and fixing bright finished hard drawn hooks and eyes complete 250mm.(two hundred fifty millimeter) size with necessary screws etcetera complete including carriage of materials within all leads and lifts The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing 100mm ( one hundred fifty millimeter bright finished brass floor door stopper with rubber cushion screws etcetera suit shutter thickness including carriage of material within all leads and lifts. The rate inclusive of Royalty, Malkana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and laying 10mm( ten millimeter ) thick full body matt finished anti skid water proof stain and impact resistant heavy duty vitrified tiles of Restile/ simpolo/ Orient- bell / AGL/ Johson Kajaria / Rak / Nitco make in size 600x600mm (six hundred into six hundred milimeters ) thick of approved shade and colour in floors treads of steps and landings laid over 12mm(twelve millimeter ) thick cement mortar 1:3 ( one cement; three sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and laying aniti skid ceramic tiles 5.5mm ( five point five millimeter ) thick of premium quality of Kajaria/Rak/ Nitco / Somany/ Bell/ AGL of 300x300mm ( three hundred into three hundred millimeter) size in flooring, treads of steps and landings on a bed of 12mm(twelve millimeter ) thick cement mortar 1:3 ( one cement; three sand ) finished with flush pointing in white cement complete including carriage of material within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government .
Providing and laying 20mm ( twenty millimeters ) thick granite stone with semi round nosing in flooring over 20mm (twenty millimeters ) thick base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete upto all floor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads ,lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and laying 300X450 mm ( three hunded into four hundred fifty millimeters ) size Ceremic Glazed tile of Kajaria/ Swastik / Somany / Bell / AGL with one border matching contrast at top in skirting risers of steps and dado on 12mm (twelve millimeter ) thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing 0.60mm (zero point six zero millimeters) thick preprinted steel sheet in roofing with hot dipped zinc metallic coated sheet with top coat of regulated modified polyster ( R M P ) organic coating of 20( twenty ) micron over 5 ( five ) micron primer coating to back coat of polyster of 5 ( five ) micron over 5 ( five ) micron primer coating including fixing with prepainted iron J or L hooks , bolts and nuts 6mm (six millimeter ) dia meter with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in- charge including carriage of materials within all leads and lifts.. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing ridges or hips 60 cm (sixty centimeters)over all with 0.60mm (zero point six zero millimeters) thick prepainted steet sheet in roofing with hopt dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 ( twenty ) micron over 5 ( five ) micron primer coating + (plus ) back coat of polyster of 5 ( five ) micron over 5 ( five ) micron primer coating including fixing with prepainted iron J or L hooks , bolts and nuts 6mm (six millimeter ) dia meter and prepainted G I limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in- charge including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing valley 60cm (ninety centimeters) over all with 0.60mm ( zero point six zero millimeter )thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of 20 ( twenty ) micron ever 5 ( five ) mircon primer coating to back coat of polyster of over 5 ( five ) micron primer coating including fixing with prepainted iron J or L hooks , bolts and nuts 6mm (six millimeters ) dia meter with prepainted G I limpet and bitumen washer complete with all acessoris as required as per the directions of Engineer in charge including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 0.63mm ( zero point six three millimeters ) thick plain galvanized iron sheet 15cm ( fifteen centimeters ) wide 45 cm ( forty five centimeters ) deep overall semi circular plain galvanized iron sheet gutter with iron bracket 40x3mm ( forty into three millimeters ) size bolts and nuts and washer etcetera complete including making necessary connection with rain water pipe complete as per drawing and design including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing Mild steel black plain sheet in eaves boards/ facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge ( Base members of steel work shall be measured and paid separately) including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing on wall faces polyvinyl chloride ( D-plast) rain water pipes of working pressure not less than 4.5 kg. (four point five kilogram )per square meter including filling the joints with approved adhesive complete in all respect in all heights including carriage of materials in all lead , lifts and other incidental charges The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government 150 mm dia ( one hundred fifty millimeters ) dia meter
Providing and fixing on wall faces PVC )D-plast ) accessories for rain water pipe including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government (a) Plain bend for 100mm ( one hundred millimeter ) diameter pipes.
Providing and fixing on wall faces PVC )D-plast ) accessories for rain water pipe including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government (a) Plain shoe for 100mm ( one hundred millimeter ) diameter pipes.
Providing and fixing mild steel Holder bat clamps of approved design to cast iron, sand cast iron or polyvinyl chloride pipes embedded in and including cement concrete block 10x10x10cm ( ten into ten into ten centimeter ) of 1:2:4 ( one cement. Two sand; four graded stone aggregate 20mm ( twenty millimetr ) nominal size mix and cost of cutting holes and making good the wall etcetera . including carriage of materials with in all lead and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Steel work welded in built up sections composed of beams, joist, channels, angles,Tee- flats, with connecting plates or angle cleats etcetera as in trusses, and trussed purlins main and cross-beams, hips and jack rafters ,purlins connecting to common rafter and the like in building including cutting, fixing ,lifting , hoisting and placing in position complete and applying a priming coat of red lead paint including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government (a) In trusses and trussed purlins in buildings.
Providing and laying cement water proofing treatment in depressed slab shall be done with Dr. FIXIT Pidilite water proof coating shall be done in two coats apply first of Dr.Fixit –FAST FLEX to the clean and saturated surface maintaining a coverage of 6-7 sqft ( six dash seven square foot ( 0.60 sqm ( zero point six zero square meter ) per kilogramme to achieve 1mm ( one millimeters ) thickness. This coating shall also be excuted upto 300 mm ( three hundred millimeters ) vertically. The second coat shall be applied in opposite direction after 4 to 6 ( four to six ) hours of application of first coat then sprinkle sand on top surface of applied Dr. FIXIT FAST FLEX while still tacky over second coat then apply cement mortar 1 : 4 ( one cement : four sand) and admixed with 200 ml ( two hundred milliliters ) of pidi proof LW @ 200 ml ( two hundred milliliter ) per 50 kg ( fifty kilogramme ) bag complete with suitable gradient towards rain water pipe while second coat of Dr. Fixit is still tacky complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Painting two or more coats(excluding priming coat ) on new steel and other metal surfaces under coat with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust, and other foreign matter, with enamel paint other than white including carriage of materials with in all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
6mm (six millimeter)thick cement plaster to ceiling with cement mortar 1:3(one cement; three sand) and curing complete upto all heights / floor level including carriage of materials in all lead and lifts The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing ACP panel / Everest Fibre cement board ceiling / saint gobain Gyproc (Indian gypsum) MFT tile sand micro 600 x600 x15 mm ( six hundred into six hundred into fifteen millimeters ) square edge tiles (60%) (sixty percent) in combination with saint gobain gyproc (indian gypsum) Fulltone tile 600x600x12.5 mm ( six hundred into six hundred into twelve point five millimeters ) tile (40%) (forty percent ) with rock wool backing (40 mm)(forty millimeter ) thick layer fixed with saint gobain gyproc powder coated T-grid system or its equivalent at the rate of 600 mm (six hundred millimeters ) center to center as per detail as per specifications or as directed by Engineer in Charge complete including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing smooth finishing to exposed surface of reinforced cement concrete or cement concrete work with cement mortar 1:3 (one cement three sand)complete in all floor/heights and curing complete including carriage of materials within all leads and lifts The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6(one cement; six sand) in single coat on rough side of brick/concrete/stone walls for interior plastering in all heights / floor level including arises, internal rounded angles, chamfers and/ or rounded angles in all girth and finished even and smooth including carriage of materials with in all leads, lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6(one cement; six sand) in single coat on fair side of brick/concrete/stone walls for interior plastering in all heights/ floor levels including arises, internal rounded angles chamfers and/ or rounded angles in all girth and finished even and smooth including carriage of materials with in all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
15mm (fifteen millimeters) thick cement plaster with cement mortar 1:5 (one cement; five sand) in single coat on fair side of brick/concrete/stone walls for interior plastering in all heights/ floor level including arises, internal rounded angles chamfers and/ or rounded angles in all girth and finished even and smooth including carriage of materials with in all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing Uni stone 12mm (twelve millimeter ) . cladding on Reinforcement cement concrete surface side as on faces of Arch masonry walls etcetera . on 12mm (twenty milllimeter ) thick cement plaster 1:3( one cement: three sand) and jointed with cement slurry including scaffolding etcetera complete as directed by the Engineer-in Charge including carriage of materials within all leads , lifts and other incidental charges.. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Applying JK / Birla whitewall care putty over plastered surfaces after thoroughly brushing the surface free from mortar drops, dust, loose material and other foreign matter sand papered smooth to give final matter finish to the surfaces complete including carriage of materials with in all leads , lifts and as per approved drawings, design or as directed by the Engineer in charge. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) of Asian paints/Nerolac paints and manufacture of approved shade on undecorated concrete / stone / plastered wall surfaces ( two or more coats ) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt , dust mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces complete and carriage of materials with in all leads, lifts and as per approved drawings, design or as directed by the Engineer in charge. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Applying two coats of Acrylic washable emulsion (Asian / Dulux /Nerolac ) paints of equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/ special pigment siliceous aggregate anti fungicides anti rusting and foaming in two coats including necessary putty to give smooth even surface and sand papered smooth including carriage of materials with in all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Distempering (two or more coats) with synthetic and acrylic oil bound washable distemper of approved brand and manufacture and of required shade on undecorated ceiling or sloping roofs to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surfaces even and sand papered smooth and carriage of materials with in all leads and lifts The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Distempering (two or more coats) with synthetic and acrylic oil bound washer distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surfaces even and sand papered smooth and carriage of materials with in all lead and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Painting two or more coats(excluding priming coat ) on flase ceiling and wood based surfaces with white enamel paint of Asian/ Nerolac paint of approved brand to give an even shade including cleaning the surfaces of all dirt, dust, and other foreign matter, and carriage of materials with in all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing plinth protection 50mm( fifty millimeters) thick cement concrete 1:3:6 ( one cement; three sand; six graded stone aggregate 20mm(twenty millimeters) nominal size)and curing complete including finishing the top surface of concrete smooth and carriage of materials within all leads and lifts The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing under layer for plinth protection of 75mm (seventy five millimeters) thick (unconsolidated) bed of dry brick/stone aggregate 40mm( forty millimeters) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete and carriage of materials with in all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing of Expansion joint system related with wall joint ( internal/ external ) location as per drawing and directions of Engineer in Charge. The joint shall be filled with polystrence back or rod base member self aligning - centering arrangement and supports. The material shall be such that it provides an Expansion joint system suitable for vertical wall to wall/ wall to corner application both new and existing construction in office buildings and complexes with no slipping down tendency amongst the components of the Joint System. The joint system shall utilized light weight with polysterence back or rod surfaces mechanically snap looking the multicellular to facilitate movement as per approved drawings/ design including carriage of materials within all leads, lifts and other incidentals The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing polythylene aluminum polythylene (PE-AL-PE) composite pressure pipe U.V.stabilized with carbon black conforming to IS- 15450-2004 kitee or its equivalent water supply including clamp at one metre spacing cutting fixing and making good the wall etcetera but excluding the cost of fittings (internal work ) pipes exposed on wall. Internal work Exposed on wall 1216 (one thousand two hundred sixteen ) (16mm O.D. ) (sixteen millimeter outer dia meter ) pipe including carriage of materials within all leads, lifts and other incidentals The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing polythylene aluminium polythylene (PE-AL-PE) composite pressure pipe U.V.stabilized with carbon black confrming to IS- 15450-2004 of kitee or its equivalent water supply including clamp at one metre spacing cutting fixing and making good the wall etcetera but excluding the cost of fittings (internal work ) pipes exposed on wall.I nternal work Exposed on wall 1620 (one thousand six hundred twenty)(20 mm OD ) pipe (twenty millimeter outer dia meter ) pipe including carriage of materials within all leads, lifts and other incidentals The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government .
Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40mm (twenty millimeters to forty millimeters)nominal bore by providing and fixing tee including cutting and threading the pipe complete and carriage of materials within all leads and lifts . The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing high pressure P V C ( poly vinyl chloride) spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive complete 150mm (one hundred fifty millimeters) dia meter including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing high pressure P V C ( poly vinyl chloride) spigot and socket , waste and ventilating pipes ISI marked including fixing with approved adhesive complete 100mm (one hundred millimeters) diameter including carriage of materials within all leads, lifts and other incidental .. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing high pressure P V C ( poly vinyl chloride) spigot and socket , waste and ventilating pipes ISI marked including fixing with approved adhesive complete 75mm (seventy millimeters) diameter including carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 150mm ( one hundred fifty millimeter) dia meter ISI marked PVC ( poly vinyl chloride) clamps of approved design with steel screws and rawl plugs etcetera complete including carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 110mm ( one hundred ten millimeter) dia meter ISI marked PVC ( poly vinyl chloride) clamps of approved design with steel screws and rawl plugs etcetera complete including carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 75mm ( Seventy fifty millimeter) dia meter ISI marked PVC ( poly vinyl chloride) clamps of approved design with steel screws and rawl plugs etcetera complete including carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 150mm ( one hundred fifty millimeter) dia meter ISI marked PVC ( poly vinyl chloride) heel rest bend including fixing with approved adhesive etcetera complete including carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 100mm ( one hundred millimeter) dia meter ISI marked PVC ( poly vinyl chloride) heel rest bend including fixing with approved adhesive etcetera complete including carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 150mm ( one hundred fifty millimeter) dia meter ISI marked PVC ( poly vinyl chloride) collar conforming to IS No. 14735-99 of Supreme/ Kishan/ Astral including fixing with approved adhesive etcetera complete and carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 110mm (one hundred ten millimeter) dia meter ISI marked PVC ( poly vinyl chloride) collar conforming to IS No. 14735-99 of Supreme/ Kishan/ Astral including fixing with approved adhesive etcetera complete and carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 75mm ( seventy five millimeter) dia meter ISI marked PVC ( poly vinyl chloride) collar conforming to IS No. 14735-99 of Supreme/ Kishan/ Astral including fixing with approved adhesive etcetera complete including carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 75mm ( seventy five millimeters ) dia meter PVC ( poly vinyl chloride) cowl of Supreme/ Kishan / Astral ISI marked confirming to IS No. 14735-99 including fixing with approved adhesive etcetera complete and carriage of materials within all leads and lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing 110 x 90 mm (one hundred ten into ninety millimeters ) nominal size P.V.C. floor trap of Supreme/ Kisan/ Astral ISI marked Confirming to BIS-14735-99 of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floor etcetera complete including carriage of materials within all leads , lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing Hindware/Cera make or its equivalent Orissa pattern vitreous china water closet squatting pan ( Indian type water closet pan) Orissa pattern 20090 size 53 x 41 cm ( fifty three into forty one centimeters )(earth work, bed concrete foot rest and trap to be measured and paid for separately) including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing vitreous China wash down water closet of Star S. No, 20087 (S-10 ) of size 57x 35x 39 cm ( fifty seven into thirty five into thirty nine centimeters ) (European Type WC pan) of approved make of (HIND WARE/CERA MAKE/ Jaquare of Star White / Snow white shade ) and of approved shade, with integral ‘P’ or ‘S’ trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement is to one sand) complete (seat cover to be measured and paid for separately ) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing PTMT coloured / whie high density polyethylene / polypropylene 10.00 /12.50/15.00(ten point zero / twelve point five zero/ fifteen point zero zero) liters capacity (full flush ) European standard control low level flushing cistern ( sleek plus Hindware/ Cera/ Jaquar or star whie / snow white shade with a pair of P V C . or mild steel brackets with fittings such as , lead valve, syphen 15mm(fifteen millimeter) nominal size) P V C ball valve with polythene float with push button copling for connection with inlet, outlet and over flow pipe including cutting holes in walls and making good the same and including carriage of materials in all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government .
Providing and fixing 100mm(one hundred millimeters) size sand cast iron P or S trap for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1( one cement: one sand) complete including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government .
Providing and fixing G.I. inlet connection for flush pipe with W.C. pan complete in all respects as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing solid type white plastic seat and cover of Hindware/ Cera/ Jaquar or Star White / Snow white shade for wash down water closet with CP brass hinges and rubber buffers as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing vitreous China bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp ( of Hindware, Cera, jaquar or star white/ snow white shade ) (waste pipe to be measured and paid for separately. : Flat back type Large urinal No. 60002 of size 390mm x 375 mm x 590mm( three hundred ninety millimeters into three hundred seventy five millimeters into five hundred ninety millimeters ) complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing 5.00 ( five ) liters capacity vitreous china automatic flushing cistern of sleek plus Hindware/ Cera/ Jaquar of star white / snow white shade with a pair of cast iron or mild steel brackets with fittings including Cast iron symphonic apparatus, mosquito proof lid, C.P. brass unions and couplings for connection with inlet out let and over flow pipe including cutting holes and making good the same and including carriage of materials in all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing vitreous china (Hindware/Cera make )division plate for Urinals of size 600mmx300 mm ( six hundred millimeter into three hundred millimeters ) complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
fixing flat back vitrious China Wash Basin Delta No. 10080 of size 58x 43 cm ( fifty eight into forty three centimeter ) ( under counter basin ) of Hindware/ Cera/ Jaquar with single holes for pillar tap with cast iron or mild steel brackets painted white including cutting holes in walls and making good the same but excluding fitting complete including carriage of materials with in all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing 32mm (thirty two millimeter) diameter rubber plug for wash basin or sink complete including carriage of materials within all leads ,lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing 32mm (thirty two millimeters)diameter M.I. union for wash basin or sink complete including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing 32mm (thirty two millimeters)diameter chromium plated continental series of Jaquar / classik series or Hindware/ JAL or its equivalent brass waste for wash basin or sink complete including carriage of materials within all leads ,lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 100 mm ( one hundred millimeters ) diameter chromium plated ISI marked IS NO. 8934 of Jaquar / Hindware or its equivalent grating of superior quality for floor, gully , or Nahni trap complete including carriage of materials with in all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing 600mm x 450mm (six hundred millimeters into four hundred fifty millimeters) bevelled edge mirror of Hindware/ Cera/ Jaquar of superior glass mounted on 6mm ( six millimeters) thick asbestos cement sheet or ply wood sheet and fixed to wooden plugs with chromium plated Brass screws and washers complete including carriage of materials within all leads , lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing750x20mm.(Seven hundred fifty into twenty millimeter) chromium plated brass towel rail of Prayag/ Hindware/ Cera complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws including carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing 600x120mm(Six Hundred into One Hundred twenty millimeter ) glass shelf of Hindware/ Cera/ Jaquar with Chromium plated brass bracket of heavy duty of ISI marked IS No. 8931 and 8934 and guard rail complete fixed to wooden plugs with Chromium plated brass screws including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing C.P. brass toilet paper holder of Jaquar/ Hindware/ Cera of heavy duty of ISI marked IS No. 8931 and 8934 complete including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing C P Jet spray of continental series of Jaquar/ classik series of Hindware of approved quality and colour with one metre tube including carriage of material with in all leads, lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing 15mm (fifteen millimeters )diameter chromium plated brass bib tap of Jaquar/ Hindware/ Cera ISI marked No. 8934 with capstan head complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 15mm (fifteen millimeters) diameter chromium plated stop cock of Prayag/ Hindware/ Cera / Jaquar with necessary fitting including carriage of materials within all leads and lifts or as directed by the Engineer-in-Charge. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing15mm (fifteen millimeter)diameters chromium plated brass pillar tap of Prayag/ Hindware/ Cera / Jaquar / Jal with capstan head complete including carriage of materials with in all leads ,lifts and other incidental or as directed by the Engineer-in-Charge. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing 15mm (fifteen millimeter)diameters chromium plated brass angle valve of Prayag/ Hindware/ Cera / jaquar / Jal without nuts and pipe complete including carriage of materials within all leads and lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government
Providing and fixing 15mm ( fifteen milimetre)nominal bore brass full way valve with wheel of Jaquar/ Hindware/ Cera /Jal complete including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 15mm ( fifteen milimetre)nominal bore brass ball valve ( Horizontal plunger type ) high pressure with polythene plastic float of jaquar/ Hindware/ Cera /Jal complete including carriage of materials within all leads, lifts and other incidentals The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing I S I marked 45cm ( forty five centimeters ) long and 15mm ( fifteen millimeters ) nominal bore P V C Connection pipe with brass union complete including carriage of materials within all leads and lifts The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing 32mm (thirty two millimeters) diameter PVC waste pipe for wash basin or sink complete including check nut and carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and placing 1000 (one thousand )liter capacity P.V.C.(poly vinyl chloride) water storage tank of ISI 12701 marked galvanized iron inlet and outlet connection including 15mm(fifteen millimeter) nominal bore ball valve and mosquito proof P.V.C.(Polyvinyl Chaloride) cover with locking arrangement including providing suitable base pad and hoisting in all heights including carriage of materials within all leads and lifts The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and laying 150 mm (one hundred fifty millimeter) internal dia meter salt glaze stone ware pipe grade ‘A’ (to level or slope) and jointing with stiff mixture of cement mortar in proportion of 1 : 1 (one cement : one sand ) including testing of pipes and joints complete as per HPPWD specifications or as directed by the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and laying cement concrete 1:5:10 (one cement; five sand : ten graded /crushed stone aggregate 40mm(forty millimeters) nominal size ) bedding for stone ware pipe of 150mm (one hundred fifty millimeters) internal diameter including necessary form work and curing complete including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Constructing manhole with reinforced cement concrete top slab in cement concrete 1:2:4 ( one cement; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size), mix foundation concrete 1:4:8 ( one cement : four sand: eight graded / crushed stone aggregate 40mm(forty millimeters) nominal size) in side plastering 15mm ( fifteen millimeters) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size) finished smooth complete including curing and testing a) inside size 800mmx800mm (eight hundred millimeters into eight hundred millimeters) and 500mm ( five hundred millimeter ) deep including cast iron cover with frame (light duty single seal pattern-I ) 455 x 610mm( four hundred fifty five into six hundred ten millimeters) internal dimension total weight of cover and frame to be not less than 38 kg. ( thirty eight kilogramme ) (Weight of cover 23 kg. (twenty three kilogramme) and weight of frame 15 kg.)(fifteen kilogramme) with 300mm (three hundred millimeters ) thick walls of square rubble masonry coursed with hard stone of approved quality in cement mortar 1:3(one cement; three sand) complete including carriage of material within all leads, lifts and other incidentals The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Constructing manhole with reinforced cement concrete top slab in cement concrete 1:2:4 ( one cement; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size), mix foundation concrete 1:4:8 ( one cement : four sand: eight graded / crushed stone aggregate 40mm(forty millimeters) nominal size ) in side plastering 15mm ( fifteen millimeters) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size ) finished smooth complete including curing and testing a) inside size 800mmx800mm (eight hundred millimeters into eight hundred millimeters) and upto any depth including cast iron cover with frame (light duty single seal pattern-I ) 455 x 610mm( four hundred fifty five into six hundred ten millimeters) internal dimension total weight of cover and frame to be not less than 38 kg. ( thirty eight kilogramme ) (Weight of cover 23 kg. (twenty three kilogramme) and weight of frame 15 kg.)(fifteen kilogramme) with 300mm (three hundred millimeters ) thick walls of square masonry coursed with hard stone of approved quality in cement mortar 1:3(one cement; three sand) complete including carriage of materials within all leads ,lifts and other incidentals or as directed by the Engineer-in-Charge. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Constructing brick masonry chamber for under ground Cast iron inspection chamber and bends with second class common clay bricks in cement mortar 1:5 (one cement; five sand) cast iron. cover with frame (light duty) 355x610mm( three hundred fifty five into six hundred ten millimeters) internal diamensions total weight of cover with frame to be not less than 38 kg ( thirty eight kilogramme ( weight of cover 23 kg( twenty three kilogramme ) and weight of frame 15 kg.) (fifteen kilogramme ) RCC top slab with cement concrete 1:2:4 (one cement; two sand four graded crushed stone aggregate 20mm(twenty millimeter) nominal size) mix foundation concrete 1:5:10 ( one cement: five sand: 10 graded crushed stone aggregate 40mm ( forty millimeters ) nominal size ) inside plaster 15mm(fifteen millimeters) thick with cement mortar 1:3( one cement three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete inside dimensions 455x610 x450mm (four hundred fifty five into six hundred ten into four hundred fifty millimeter) deep single pipe line complete as per HP. PWD. Specifications or as directed by Engineer in charge including carriage of materials within all leads , lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.
Providing and fixing composite end seal compression fitting as per IS -15450 - 2004 for cold water supply of Kitec/ Kisan of its equivalent make e.g. (for example) tees, elbows, reduces, connectors, couplers and clamps with jointing testing and fitting complete including cutting holes in walls including carriage of materials within all leads, lifts and other incidentals incidentals The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government . a)equal tee 1620 ( one thousand six hundred twenty )
b) Female elbows 1620x15mm ( one thousand six hundred twenty into fifteen millimeter) thread
c)Female branch Tee 1620x1620mmx20mm ( one thousand six hundred twenty into one thousand six hundred twenty into twenty millimeter) thread
d) Male thread connector 1620x15mm ( one thousand six hundred twenty into fifteen millimeter) thread
sourav mahajan
KANAV MEHTA
Rajeshwar Singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .