Special Repair to Bldg No 129 (Cook Houses) of 320 MED Regt in Army Area Jodhpur

Amount

Demolition of cement concrete in ground floors and pavings n.exc 15 cms thickness below or above ground level)

M&L for 25 mm thick PCC 1:2:4 (using 20 mm graded stone aggregate) to receive floor finishes etc complete.

M&L for 18 to 20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Material and labour for 20-25mm thick kota stone slab laid and jointed with grey cememnt slurry including rubbing and polishing complete as in shelves all as specilfied and as directed

M&L for machine cut kota stone slab 20-25mm thick as in floor of size 580x580mm set and jointed over and including15mm thick screed bed in CM (1:6) including cutting and granite polishing complete

All as per item No 5 above but as in skirting over and incl15mm thick rendering in CM (1:6) and polishing complete.

M&L for Glazed ceremic coloured tiles size 300x450 mm and6- 7mm thick as per IS-13712 Grade II(a) over and included 15mm thick rendering in CM (1:6) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dados all as specified and as directed.

M&L for colourded non-skid ceremic tiles size exc 0.11 sqm and n exc .18 sqm and 6-7 mm thick as per IS 13712 Grade II (a) in floor etc set jointed and pointed in white or coloured cement to match as in floors over and incl 25mm thick PCC (1:2:4) type B1 and including 10 mm thick screed bed in CM (1:6) all as specified and as directed by Engr-in-Charge.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.and including 15 mm thick screed bed in CM 1:6 .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Taking down cement or cement plaster any description and in any position including raking out joints hacking for key & scrubbing down with water etc complete.

Rendering 15mm thick in CM 1:6 on stone surface of walls finished even and smooth without using extra cement.

Rendering 10mm thick in CM 1:4 on concrete surfaces as on ceilling surfaces/chajja, facia etc to be finished even and smooth without using extra cement

Raking out joints to squarred rubble stone masonary coursed or uncoursed built in cement mortar or cement lime mortar

M&L for keyed pointing to squarred rubble walling coursed or uncoursed in CM (1:4)

M&L for two coat of Oil Bound Distemper over a two coat of wall putty including preparation of new plasterd surface

M&L for three coat of white wash including preparation of new surfaces as on walls all as specified and as directed by the Engr-in-Charge

M&L for three coat of white wash including preparation of new surfaces as on ceilling/chajja/facia all as specified and as directed by the Engr-in-Charge

M&L for two coat of white wash including preparation of old surfaces as on walls all as specified and as directed by the Engr-in-Charge

M&L for two coat of white wash including preparation of old surfaces as on ceillings

M&L for two coat of cement base paint on newly plastered/unplastered surfaces of walls including preparation of surfaces etc complete all as directed and as specified

Taking down shutters of any description exc 1.00 sqm but n.exc. 2.0 sqm each

Taking down chowkhats with shutter (wihtout taking of shutters from the frames) size n.exc 1.5 sqm each

Taking chowkhats with shutter (wihtout taking of shutters from the frames) exc 1.5 sqm but n.exc 4.0sqm each

M&L for Pressed steel frames for doors 165 x 60mm size fabricated with 1.00mm thick sheet with rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S&F pressed steel door frames of size 125mmx60mm with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified .

M&L for PCC 1:3:6 ype C1 using 20mm graded stone agg as in bed blocks for hold fasts and similar work all as specified.

Taking down steel window with glaging and without glazing bar etc complete including guard bars in fitting

All as per item No 28 above but ventilators of any size

S&F of Factory made steel window box type using ERW hollow 'P' section including box type hinges with steel handle , tower bolt and steel peg stey complete with glazing bars , dovetailed or welded comlete with cooler opening all as specified incl repair to jams in CM 1:4 complete all as directed by the Engineer -in - charge all as specified. Refer Drawing No CEJZ/TD/20 sheet 1/3 to 3/3.

S&F of Factory made steel window box type using ERW hollow 'P' section including box type hinges with steel handle , tower bolt and steel peg stey complete without glazing bars , dovetailed or welded comlete without cooler opening all as specified incl repair to jams in CM 1:4 complete all as directed by the Engineer -in - charge.Note : for item No 99 & 100 Both shutters jointed internally with flat iron 40x 4mm complete and Grill/ Gurad bar shall be measured and paid separtly ubder resective item of Sch 'A'. Refer Drawing No CEJZ/TD/20 sheet 1/3 to 3/3.

S&F Steel ventilator with top hung shutters with glazed bars including hinges steel peg stay etc complete all as specified and shown on drawings No CWE(A)/TD-106/2012 sheet 1/2 &2/2 including down existing ventilators

Welding in repairs in steel windows hinges all as directed and as specified .etc.

S&F of framed work as in guard bars ,grills ,gratings and similar work confirming to FE 290,Gde-E-165 Etc.

S&F galvanised ms wire cloth 0.56mmm nominal dia of wire and average width of aperature 1.18mm complete.

S&F in repairs galvanised ms wire cloth 0.56mmm nominal dia of wire and average width of aperature 1.18mm complete.

M&L for 35mm thick 2nd class HW panelled door factory made door shutters 12mm veneered partical board with commercial veneering on both face the size of rail and stile as per IS:1003 (Part 1) in size all as specified and directed by the Engiineer-in-Charge.

S&F 2nd class hard wood 35mm thick gauged & skelton shutters open rebated divided into squares with plain chamfered or rounded mitred and rebated sash bars to receive gauge etc, edges of framing chamfered or rounded fited with cut and mitred beads for securing gauge size of members of shutters as specified in SSR part-1 as supplied and fixed to chowkhat

S&F factory made PVC door frames of size 50mmx47mm made out of 5mmm olain colour PVC sheet re-enforced with MS square tube

S&F factory made solid pannel PVC door shutters 30mm thick (style) consisting of frames made of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width struck inside with solvent cement for styles and plain colour PVC sheet for top rail ,lock rail and botom on either side and as gap insert for top rail and botom rail,paneling of plain colour PVC sheet to be fitted to the MS frames/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement,supplying and fixing in the frame at site as per specifications and drawing.

S&F of cold rolled mild steel, butt hinges 100mm long medium weight

S&F of aluminum anodized tower bolt of size 200mm long

S&F of aluminum anodized handles cast type of size 100mm long

S&F 300mm long MS sliding door bolt plate type stove enemelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate.

S&F of aluminum anodized handles cast type of size 150mm long

S&F 150mm double action spring hinge , brass with phophor bronze wire spring bright polished complete all as specified and as directed.

Taking out from position framed woodwork as in cupboards , book shelves etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.30 sqm but nexc 1.0 sqm

M&L for fabrication of cabinets book shelves etc using 18 mm thick exterior grade MDF Boards as in shelves,shutters, etc complete all as directed complete.

S&F 0.90mm thick decorative laminate type I of approved shade & pattern with finish/texture (matt/glossy/chequered) as approved in one or more colours fixed to MDF Boards / wooden frame front sides with appropiate adhesive all as per manufacturers instructions.

Extra over MDF boards for teak wod lipping 3 mm thick 18 mm wide complete

S&F continuous (piano) hinges of extruded mild steel body body fixed with cadmium coated screws complete all as directed of size 30mm

Hacking out old broken glass from metal frames including pounching or drilling out old glazing pins/spring clipsand providing and fixing new ones.

Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane

Material and labour for 3mm thick pin head sheet glass and glazing with oil putty in square n.exc 0.5 sqm in each pane

M&L for two coat of synthetic enamel paint over a coat of red oxide primer on steel and iron surfaces over 10 cms in width or girth not other wise descrived including preparation of new surfaces all as specified and as directed by Engr-in-Charge.

M&L for one coat of synthetic enamel paint on steel and iron surfaces over 10 cms in width or girth not other wise descrived including preparation of old surfaces all as specified and as directed by Engr-in-Charge.

M/L two coat of synthetic enamel paint over a coat of pink pimer on wooden surfaces incl prepararion of new surfaces over 10 cms width or girth complete all as specified.

Taking down steel water tubing and connections of 15mm bore pipe

Taking down steel water tubing and connections of 20mm bore pipe

Re-fixing only steel tubing in walls ,ceillings ,floor etc of 15mmm bore

Re-fixing only steel tubing in walls ,ceillings ,floor etc of 20mmm bore

S&F steel water tubing med grade galvaniszd with all fittings and fixed to walls and ceillings or laid in floors complete (a) 15mmdia

All as per Item No 62 above but 20mm dia

S&Fin repair bib taps cast copper alloy with crutch or butter fly handles screwed down ,screwed for iron pipe or for brass ferrule 15mm bore in repair

S&F in repair stop valves cast copper alloy with crutch or butter fly handles screwed down ,screwed for iron pipe or for brass ferrule 15mm bore in repair

S&F in repair CI floor & Nahani trap with grating including jointing to wast pipe 75 mm dia bore of out let all as specified.

S&F in repair CP mild steel grating 100mm dia as in repairs.

S&F in repair tubular towel rail 20mm dia D type 60cms long between flanges brass chromium plated as in repars.

Demolition of re-enforced cement concrete as in chajjas and similar suspended work etc.

M&L for 7.5cms sand stone slabs as in sunshades, chajjas n.exc 2.0m in length pounched dressed on face and along exposed edges ,self faced on other side and set and pointed in CM 1:4 complete all as specified.

Supply and fixing of vitreous china WHB size 550x400mm white flat back including CP waste pipe,PVC connection including brackets as in repairs.

S&F of pillar taps cast coppper alloy chromium plated with capstan head.

S&F of PVC down pipe with socket 32mm bore 900mm long as in repairs.

S&F of PVC connection 600mm long 15mm size with PTMT nuts all as specified.

S&F as in repair kitchen sinks with drainage board made of stainless steel 1mm thick with plug, washer and waste including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, over all size 1040mmx510mm bowl size 510x405x200 mm complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B1 using (20mm graded stone Aggr) as in floor/hard standing flooring finished even and smooth without using extra cement.

M&L for 50mm thick PCC 1:3:6 type C-1 using (20mm graded stone Agg) as in plinth protection finished complete including forming joints in 3 mtr inetrvals and filled with bitumen mastic all as drected.

Taking down complete water proofing treatment in any position and any thickness over RCC roof and remove the debris out of defence land.

M&L for plain cement concrete 1:2:4 ty B -0 using 12.50 mm graded crushed stone agg over roof for making good depression / undulation and as in roor kerb to match the existing as filing in depression of roof slab surface of roof

M&L for plain cement concrete 1:3:6 ty C -1 using 20 mm graded crushed stone agg as in coping to a parapet walls including necessary form work completed all as specified

M& L for roof treatment in the following stages first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions Second Course :One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 3.00Kg/Sqm Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm Sixth Course : 25mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 0.40 Sqm

Supply only liquid water proofing compound complete all as specified and directed

M&L for chequered cement concrete tiles 20cmx20cmx25mm thick set jointd and pointed in neat cement slurry in floor all as specified and directed by Engr-in-charge.

Dismantling of PVC water storage tank of capacity exc 500 ltrs and n.exc 1000 ltrs al as specified.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. and Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity 1000 ltr PVC Tank

S&F ball brass valves ,high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed in 20mm bore of pipes all as specified.

M&L for two coat of OBD over two coat putty on old plastered surfaces to match the including complete removal of existing treatment and preparation of surfaces etc complete.

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

M&L for 5 mm thick coloured PVC sheet tiles for insulation and accoustic purpose 60cmx60cm in size fixed with stapels fixed on with and including pre powder coated GI sections snap grid of 605x605mm) frame work for false ceiling all as specified as in ceiling all complete as specified

S&F of framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe 410-W(Gde E-250) quality-A

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

S&F pre painted galvatume aluminum zine coating GI based corrugated steel sheet 0.50 mm th of TATA Blue seopy/Ciril coloured having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with J hook and bolt, tapping screws as per manufacturer instruction and all as specified and directed.

M&L for 18-20 mm thick yellow Jaislmer marble stone machine cut as in skirting & risers & other vertical surfaces complete over 10 mm thick rendering in CM 1:3 complete

M&L for 18-20 mm thick yellow jaislmer stone mirror polished laid in flooring as in borders or corner stones etc as per approved pattern in flooring over 15 mm thick screeding in CM 1:4 complte all as directed & specified.

Demolition of stone masonry built in cement mortar

M&L for squarred rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6

All as per item No 97 above but except stone

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing

Providing precast cement concrete Type C1 1:3:6 using (20mm graded aggregate), solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls

M/L for 75mm thick cement concrete type B-1 1:4:8 (using 20mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.

S&F machine made precast cement concrete blocks (Interlocking pavers ) rubberised finished coloure of 60mm thick top layers of anti abrasive material laid over and incl 25mm thick sand cushion. The interlocking tiles joint will be filled with fine sand.

S&F machine made precast cement concrete curb stone blocks using cement concrete 1:2:4 type B1 (20mm graded agg) all as specified and directed.

Excavating in post holes and getting out in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface

S&F plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 and complete all as directed.

S&F of 2 mm thick colored Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc. fixd with J hook, nut and bolts with washers

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose, celing fan etc complete

M & L for Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FR) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked in and including PVC rigid conduit (MMS) ISI marked with accessories fixed Concealed in wall / roof / ceiling etc and including sunken pressed steel terminal boxes in wall and 1.50 sq mm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for :-(a) One light point controlled by one, one way switch

All as per Item No 108 above but One light point controlled by two two way switchs.

All as per Item No 108 above but One fan point controlled by one way switch.

All as per Item No 108 above but One socket outlet 3 pin 5/6 Amps on same board

All as per Item No 108 above but One socket outlet 3 pin 5/6 Amp on independent board

All as per item No 108 above but with 2.5 Sq mm single core multistanded copper conductor cable for 6 pin 15 Amp socket outlet on independent board .

S&F switch flush type single pole one way 6 Amp ISI Marked .

S&F switch flush type single pole two way 6 Amp ISI Marked .

S&F switch flush type single pole one way 16 Amp ISI Marked.

S&F socket outlet 3 pin, 6 Amp flush type ISI marked.

S&F socket outlet 2 in 1, 6 pin, 6 and 16 amp flush type ISI Marked .

supply and fix socketed stepped type electonic fan regulator ISI marked . flush type.

S & F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body ISI marked

M&L for angle holder made out of poly carbonate with metal lamp holder ISI marked with back plate fixed on PVC square block with LED Lamp 7 Watt

Hanging only ceiling fan of any size, taken down under item no 1 above.connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor of size 0.5 Sq mm from ceiling rose/ connector to fan.

M&L for taking down exhaust fan 300/450mm carefully after disconnecting electrically and mechanically by all means from existing position at location and refixing complete with fastner nut, bolts & washers with S&Fixing louvers made out of MS ,up to the entire satisfaction of Engg-in-charge after completion of electrical work.

S&F Light fittings, with1X10watt LED 230 volt 50 Hz bulk head luminaries, complete with all accessories and including connecting up with PVC insulated and sheathed , 1100 volts grade , flexible , multistranded 1.0 sq mm copper conductor three core cable. (Items issued against Sch-B)

S&F LED tube light fitting. single tube, 1 x 20 w, T8, Complete with LED Tube rod 20 Watt 230 v ( power factor not less than 0.90 ), bipin holders connector block, etc. complete with all accesssories internally pre-wired , including Fl lamp T5 28 W and connectiong up with PVC insulated and sheathed , 1100 volts grade , flexible , multistranded 1.0 sq mm copper conductor three core cable.

S&F LED tube light fitting. single tube, 1 x 8/10 w, T5, Complete 230 v ( power factor not less than 0.90 ), bipin holders connector block, etc. complete with all accesssories internally pre-wired , including Fl lamp T5 28 W and connectiong up with PVC insulated and sheathed , 1100 volts grade , flexible , multistranded 1.0 sq mm copper conductor three core cable.

S&F street light .fitting LED Type 1x30W,, single phase 240V comprising of , all fittingslfixtures pre-wired, , with epoxy powder coated, with rubber gasket with hinge arrangement on one side and two latches on the other side including 25 mm dia galvinised iron pipe light grade bracket bent to shape over all length 1.6 mtr fixed to wall with 2 Nos F1 clamps made of 40x6 mm F1 and 15 cm long 8 mm dia boiJts and nuts with washers grouted in wall including , all accessories pre-wired all as specified. Street light fitting.

M&L for sub main wiring with 2x4 Sq mm single core multistrandred copper conductor PVC insulated and unsheathed (FR) cable incl 4 Sq mm single core copper conductor cable PVC insulated and unsheathed (FR)cable as earth wire. , passing through in and including PVC conduit ( MMS), ISI marked with accessories fixed to surface of wall/roof/ceiling etc. and making good the distrurbed surface of wall Note :-(i) Two runs of cable 6 Sqmm and One run of 4 Sqmm along with PVC conduit shall be measured as unit length.

S&F distribution board double door , in sheet metal enclosure dully flushed in wall, when MCB to be used with 200 Amps rated copper bus bar confirming to relevant IS TPN 4 way suitable for fixing MCCB 4 Pole as incomer and MCB for out going making good the disturbed surface all as directed by Engg-in-charge.

Taking out old U/S DB's with wooden board / boxes S&F distribution board manufacturer prewired , IP 42 in sheet metal enclosure dully flushed in wall, when MCB to be used with 200 Amps rated copper bus bar confirming to relevant IS SPN 12 way cat no.- SD 3707 and making good the disturbed surface all as directed by Engg-in-charge.

Taking out old U/S DB's with wooden board / boxes S&F distribution board manufacturer prewired , IP 42 in sheet metal enclosure dully flushed in wall, when MCB to be used with 200 Amps rated copper bus bar confirming to relevant IS SPN 4 way cat no.- SD-380 making good the disturbed surface all as directed by Engg-in-charge.

S& F MCCC 4 Pole 100 A mps 16 KA

S& F MCB SPN 25 amps 10 Ka, "C' series

S&F MCB single pole 5 to 30 Amps, 10 Ka, "C' series

M & L for earthling complete with galvanized Steel earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 meters below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and incl galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by GI protection pipe light grade 15mm dia connected to main earth wire on pole or controll board GI pipe light grade 20mm bore for watering funnel with wire mesh PCC chamber pit in PCC 1:3:6 type C-1 40mm yhick Precast RCC -25 cover reincorced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle, excavation and earth work in any type of soil and removal upto 50m complete all as sprecified and shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

Supply,laying and fixing only along the poles,floor, ground or passing through walls etc jointing and testing LT Cross Linked Polythene Insulated galvanised steel strip armoured electric cable 1100 volt grade heavy duty ISI marked with aluminium conductor and overall served with an outer sheath of PVC of cross sectional area 16 sqmm x 4 core ISI marked ,all as directed by Engg-in-charge.

Supply and fixing MCCB 125 Amps 25 KA including sheet metal enclosure powder coated finish and fixed flush in wall including making good to distrubed surface etc complete.

Supply and fixing Sheet metal Busbar chamber factory fabricated powder coated finish complete with copper busbar TPN 250 Amps including fixing arrangement etc complete

Excavating in trenchs in soft/loose soil, n exc 1.5m wide and n exc 1.5m in depth; for laying of cables etc. n.exc 10sq m on plan and n exc 1.5m in depth and getting out .

Removing surplus excavated material (soil) not exceeding 50 metre and deposRing where directed at a level not exceeding 1.5 metre above the starting point.

Returning, filling in trenches with excavated soil, including, spreading, levelling, watering and well rammin in la ers not exceeding 25 cm thick complete.

S & L Jodhpur stone quarry faced stone slab cover 40 to 50mm thick, 25cm to 30cm wide, 60cm long, laid dry and abutting each other with gap cetween adjacent slab not exceeding 10mm over under ground cables for protection.

Sand cushioning to under ground cable using river sand and gently punning for cushioning to cable all as specified.

S&F Pipe galvanized iron light grade complete with all fittings laid in road crossing, and on pole, floors buildings complete all as specified and directed ISI marked. of 40mm bore.

Rajesh Enterprises

HINDUSTAN TRADING COMPANY

Jai Doulat Construction Co

HOODA CONSTRUCTION COMPANY

S. D. Construction Co.