Providing, Supplying and fixing furniture work at Home Guard Kacheri Sundhiya, Dist.Mehsana. (2nd Attempt)

NO. IN FIGURE IN WORDS Rs.

1 Table: Size: (1.83 x 0.90 x 0.76) Providing and fixing 25mm thick (plywood interior grade) post forming laminated top

in approved shade with telescopic suspended metal keyboard with mouse tray with 38mm vertical legs made by

plywood with exterior side 1mm and interior side 0.8mm approved laminate. Appron should be made from plywood

with laminated finish as per detail drawing and CPU Trolley should be supplied of metal powder coated, Footrest (0.75

x 0.37) should be from teakwood with melamine polish complete. Seperate Drawer unit box (0.65 x 0.41 x 0.43) with Rs. Eighteen Thousand Six Hundred

wooden bidding patti on nylon castors with lock and telescopic channel of HAFELE should be made from 19mm Forty Two & Paise Eighty Three Only

plywood with 1mm outside and 0.8mm inside laminate as well as approved shade for Left or Right side. Including all

materials and labour etc. complete as per detail drawing and instruction of engineer-in charge. (T-03)

2 Table: Size: (1.52 x 0.76 x 0.76) Providing and fixing 25mm thick (plywood interior grade) post forming laminated

top in approved shade with telescopic suspended metal keyboard with mouse tray with 38mm vertical legs made by

plywood with exterior side 1mm and interior side 0.8mm approved laminate. Appron should be made from plywood

with laminated finish as per detail drawing and CPU Trolley should be supplied of metal powder coated, Footrest (0.75

x 0.37) should be from teakwood with melamine polish complete.Seperate Drawer unit box (0.65 x 0.41 x 0.43) with Rs. Sixteen Thousand Six Hundred

wooden bidding patti on nylon castors with lock and telescopic channel of HAFELE should be made from 19mm Twenty Two & Paise Sixty Two Only

plywood with 1mm outside and 0.8mm inside laminate as well as approved shade for Left or Right side. Including all

materials and labour etc. complete as per detail drawing and instruction of engineer-in charge. (T-04)

3 Side Table: Size: (0.91 x 0.46 x 0.69) Providing and fixing 25mm thick (plywood board, interior grade) post forming

laminated top with 6mm thick plywood at backside in approved laminate shade, made out of 19mm thick plywood

with exterior side 1mm and interior side 0.8mm approved laminate, Drawer unit box (measurement shown in drawing)

with wooden bidding patti, lock and telescopic channel of HAFELE should be made from 19mm plywood with 1mm Rs. Eleven Thousand Six Hundred

outside and 0.8mm inside laminate as well as 19mm post forming Outside of shutter with Magnet, Multiple drawer 3.00 NOS. 11,684.95

Eighty Four & Paise Ninety Five Only

lock, S.S. Legs (75mm height) in bottom, Auto hinges of HAFELE. Including all materials and labour etc. complete as

per detail drawing and instruction of engineer-in charge . (S.T-02)

4 Cluster (Work station ) (1.37 x 0.69 x 0.76m & Having partition ht. as per detail drg.) Providing and fixing Cluster

(Workstation) as per drawing, Framing the skeleton with 19mm + 19mm thick vertical and horizontal plywood patti

plate for conduit pipes of electrical/networking cables with openable stud from horizontal partition. Vertical support of

19mm + 19mm thick double plywood cover with 1mm laminate finish including teakwood bidding on exposed edges

with melamine polish. Fitted 25mm thick (plywood interior grade) post forming laminated top, fixed with metal Rs. Sixteen Thousand Six Hundred Ten

clamps including suspended metal keyboard-mouse tray fixed with telescoping channel, cable manager and seperate 5.00 NOS. 16,610.46

& Paise Forty Six Only

Drawer unit box (0.65 x 0.41 x 0.43) with wooden bidding patti on nylon castors with lock and telescopic channel of

HAFELE should be made from 19mm plywood with 1mm outside and 0.8mm inside laminate as well as approved

shade for Left or Right side. Providing and fixing of softboard (12mm thick) OR glass (5mm thick) as per detail

drawing and instruction of engineer-in charge.

ESTIMATED RATE [Rs. Ps.]

ITEM AMOUNT

DESCRIPTION OF ITEMS QTY. UNIT

NO. IN FIGURE IN WORDS Rs.

5 Conference Table Providing and fixing 25mm thick (plywood, interior grade/MDF/with post forming laminated top in

approved shed) with bottom 0.075m. 19mm ply patta for edge thickness and edges should be cover with 1mm interier

side 0.8mm approved laminate with 19mm + 19mm thick vertical legs made by plywood with exterior side with

laminated finish and 8mm thick plain glass fixed in center of the apron area as per detail drawing, footrest should be Rs. Nine Thousand Three Hundred

from 19mm plywood with laminated finish in approved shade. Including all materials and labour, all edges should be Eighty Nine & Paise Thirty Two Only

laminated etc. complete as per detail drawing and instruction of engineer in charge and consultant.

6 High Back Chair (MODEL LIKE HOF OCT 171) Providing and supplying Revolving synchro tilting mechanism

based chair with gas lift for adjustable height and medium curved back with seat and back PU moulded cushion with

MS pipe frame structure and white foam layer for seat and molded PU foam. White foam layer for back covered with

thick cloth and draped with cloth of approved shade. (min. of Rs.150/meter). 5 legged revolving molded nylon chair Rs. Seven Thousand Sixty One & Paise

base with good quality of PU castors with 2 years replacement guarantee. The chair to have wide polyurethane arm rest Eighty Six Only

of approved shape. Complete chair should be in suitable shape. Rates to be inclusive of all taxes and free delivery at

7 Medium Back Chair (MODEL LIKE HOF OCT 172) Providing and supplying Revolving synchro tilting mechanism

based chair with gas lift for adjustable height and medium curved back with seat and back PU moulded cushion with

MS pipe frame structure and white foam layer for seat and molded PU foam. White foam layer for back covered with

thick cloth and draped with cloth of approved shade. (min. of Rs.150/meter). 5 legged revolving molded nylon chair Rs. Five Thousand Eight Hundred

base with good quality of PU castors with 2 years replacement guarantee. The chair to have wide polyurethane arm rest 5.00 NOS. 5,836.25

Thirty Six & Paise Twenty Five Only

of approved shape. Complete chair should be in suitable shape. Rates to be inclusive of all taxes and free delivery at

8 Low Back Chair (Staff & Visitor ) (MODEL LIKE HOF OCT 173) Providing and supplying Revolving synchro tilting

mechanism based chair with gas lift for adjustable height and medium curved back with seat and back PU moulded

cushion with MS pipe frame structure and white foam layer for seat and molded PU foam. White foam layer for back

covered with thick cloth and draped with cloth of approved shade. (min. of Rs.150/meter). 5 legged revolving molded Rs. Four Thousand Six Hundred Sixty

nylon chair base with good quality of PU castors with 2 years replacement guarantee. The chair to have wide 10.00 NOS. 4,669.00

polyurethane arm rest of approved shape. Complete chair should be in suitable shape. Rates to be inclusive of all taxes

9 Fix Chair Providing and supplying fix chair with medium curved back with seat and back PU moulded cushion with

MS pipe frame structure and white foam layer for seat and molded PU foam. White foam layer for back covered with

thick cloth and draped with cloth of approved shade. Complete chair should be in suitable shape. Rates to be inclusive Rs. Two Thousand Two Hundred Sixty

10 Full Ht. Storage (0.46m Depth) Providing and fixing full height storage with 25mm thick (plywood board, interior

grade) top and shutter 19mm made from post forming in approved shade with vertical and horizontal surface 19mm

plywood with inside 0.8mm and outside 1mm laminate finish. All teakwood bidding should be finished by melamine Rs. Ten Thousand Five Hundred Two &

polish with support of S.S. legs, lock, handle, etc. complete. Including all materials and labour etc. complete as per Paise Seventy Eight Only

detail drawing and instruction of engineer-in charge. (F.H.S-01)

11 Three Seater Sofa Providing and supplying the sofa will be total prepared in metal structure. So, 50mm x 50mm sq.

metal furniture pipe section created necessity support for 3 seaters sofa. Seat support also been in same metal section.

In the metal section, the finished seating must be 0.78mm length x 0.53mm width. 3 Seater also created. then Z-

Section spring use and on top 4''.0' rubber cushion and top 25mm thick and 32 density U-Foam finished with leather

cushion with 25mm U-Foam with 32 density appropriate 3'' angle support, also done finishing along with leather Hundred Thirty One & Paise Five Only

finished. To adding the decorative part 12mm dia. S.S. chrome pipe finish with legs and handle support also as shown

in drawing to create decoration and strengthening support. Including all materials and labour etc. complete as per detail

drawing and instruction of engineer-in charge.

ESTIMATED RATE [Rs. Ps.]

ITEM AMOUNT

DESCRIPTION OF ITEMS QTY. UNIT

NO. IN FIGURE IN WORDS Rs.

12 Roller Blind Providing and fixing Roller Blind curtain fixed on window level on wooden batten and curtain lift with

cotton thin rope, design and colour as per instruction by engineer – in – Charge with necessary hardware fitting, Rs. Two Thousand Three Hundred Fifty

material and labour etc complete. Nine & Paise Forty Six Only

13 Providing and FIxing Stainless Steel ( 304 Grado ) Matt/ Satin FINIsh 9,S Roctangle DINING TABLE Of SIze

1800mmX750mmX 750mm,completed as per dotalled drawimy e as drectod by onglinoer In charge. Rato are Rs. Seventeen Thousand Two Hundred

inclusive of all material, Iabour, taxes & polishing. Twenty Nine Only

14 CAFE CHAIR : Providing and supplyıng cafe chalr with mouldes PVC back and seat with chrome plated MS plpe

frame structue .Complete chair should be in suitable shape Rates to be inclusive of all taxes and free delvery at site Rs. Three Thousand One Hundred

15 Providing, Supplying and Fixing 16MM thick HDF Board of Approved Brand. The rate inclusive with labours, Rs. One Thousand Ninety Six & Paise

Adhesive,Cutting and Fixing As per drawing and as Directed by engineer-in-charge. 110.00 SMT. 1,096.15

Fifteen Only

16 Providing, Supplying and Fixing 0.80 MM thick laminate of Approved Brand (Figured Laminate For Out Side), The

rate inclusive of Adhesive,Cutting and Fixing of Laminate by hot melt glue process As per drawing and as Directed by Rs. Seven Hundred Two & Paise

engineer-in-charge. Seventy Only

17 Providing, Supplying and Fixing 0.80 MM thick laminate of Approved Brand(Plain White Laminate inner Side), The

rate inclusive of Adhesive,Cutting and Fixing of Laminate by hot melt glue process As per drawing and as Directed by Rs. Six Hundred Forty Five & Paise

engineer-in-charge. Thirty Six Only

18 Providing, supplying and fixing PVC/ ABS edge Beading 22 x 2 mm thickness of Approved Brand. Adhesive,Cutting

and Fixing of Laminate by hot melt glue process As per drawing and as Directed by engineer-in-charge. Rs. Sixty Nine & Paise Ninety Eight

19 Providing, supplying and fixing PVC/ ABS edge Beading 22 x 0.8 mm thickness of Approved Brand.

Adhesive,Cutting and Fixing of Laminate by hot melt glue process As per drawing and as Directed by engineer-in- Rs. Thirty Nine & Paise Twenty Eight

charge. Only

20 Supplying & Fixing & installation of SS Grade 304, Cutlery Basket of Approved Brand of size (470 x 535 x 100) mm

Approximately with minimum weight 2.765 Kg for kitchen cabinet. Including 20" DRSL(35 KG) Soft Closed channel Rs. Five Thousand Five Hundred Sixty

of Approved Brand As per drawing and as Directed by engineer-in-charge. One & Paise Eighty Eight Only

21 Supplying & Fixing & installation SS Grade 304, Cup & Soucer of Approved Brand of size (470 x 535 x 100) mm

Approximately with minimum weight 3.253 Kg for kitchen cabinet.Including 20" DRSL(35 KG) Soft Closed channel Rs. Four Thousand One Hundred Sixty

of Approved Brand As per drawing and as Directed by engineer-in-charge. Six & Paise Twenty Nine Only

22 Supplying & Fixing & installation SS Grade 304, Thali Basket of Approved Brand of size (470 x 535 x 150) mm

Approximately with minimum weight 3.751 Kg for kitchen cabinet of Including 20" DRSL(35 KG) Soft Closed Rs. Four Thousand Thirty Five & Paise

channel of Approved Brand As per drawing and as Directed by engineer-in-charge. Seventy Only

23 Supplying & Fixing & installation SS Grade 304, Plain Basket of Approved Brand of size (470 x 535 x 100) mm

Approximately with minimum weight 2.533 Kg for kitchen cabinet of Including 20" DRSL(35 KG) Soft Closed Rs. Three Thousand Eight Hundred

channel of Approved Brand As per drawing and as Directed by engineer-in-charge. Thirteen & Paise Ninety Nine Only

24 Supplying & Fixing & installation SS Grade 304, Plain Basket of Approved Brand of size (470 x 535 x 150) mm

Approximately with minimum weight 3.010 Kg for kitchen cabinet of Including 20" DRSL(35 KG) Soft Closed Rs. Four Thousand Two Hundred

channel of Approved Brand As per drawing and as Directed by engineer-in-charge. Ninety Seven & Paise Eighty Six Only

25 Supplying & Fixing SS Grade 304, PULL OUT of Approved Brand with size (200 x 485 x 430) mm Approximately

with minimum weight 2.080 Kg for kitchen cabinet ofIncluding 20" DRSL(35 KG) Soft Closed channel of Approved Rs. Four Thousand Nine Hundred

Brand As per drawing and as Directed by engineer-in-charge. Twenty Four & Paise Two Only

26 Providing & Fixing AISI 304 Grade Stainless Steel Satin Finish Cabinet Handle of Approved Brand made of Ø

mm steel bar and The length of handle should be of 160 mm, minimum weight 136 gram perfect center-to-center hole Rs. One Hundred Forty Two & Paise

and extremely even surface and should be provided with 2Nos. of high quality nickel coated Philips four head screw 41.00 NOS. 142.96

Ninety Six Only

etc. complete As per drawing and as Directed by engineer-in-charge.

ESTIMATED RATE [Rs. Ps.]

ITEM AMOUNT

DESCRIPTION OF ITEMS QTY. UNIT

NO. IN FIGURE IN WORDS Rs.

27 Providing & Fixing AISI 304 Grade Stainless Steel Satin Finish Cabinet Handle of Approved Brand made of Ø

mm steel bar and The length of handle should be of 96 mm, minimum weight 92 gram perfect center-to-center hole Rs. One Hundred Sixteen & Paise Sixty

and extremely even surface and should be provided with 2Nos. of high quality nickel coated Philips four head screw 12.00 NOS. 116.66

etc. complete As per drawing and as Directed by engineer-in-charge.

28 Providing & Fixing AISI S.S. 304 Grade Stainless Steel Satin Finish Square Tower bolt of Approved Brand with

overall length (excluding Bracket) 200 mm and inner bolt of □ 10 mm and outer □ 15X15 mm Sqaure Pipe with

Rs. Two Hundred Twenty & Paise Forty

necessary S.S. Fixing Screws etc. complete As per drawing and as Directed by engineer-in-charge. Three Only

29 Supplying and Fixing Plastic Wardrobe Magnet Catcher Of Approved Brand with Necessary Screws etc . Complete

As per drawing and as Directed by engineer-in-charge. 47.00 NOS. 65.95 Rs. Sixty Five & Paise Ninety Five Only

30 Supplying and Fixing High Quality Wardrobe Lock Of Approved Brand with Computerised bras key etc. complete Rs. Four Hundred Ninety Eight & Paise

with Necessary Screws etc . Complete as Specified in drawing and as Directed by Engineer in Charge. 21.00 NOS. 498.96

Ninety Six Only

31 Providing & Fixing AISI 304 Grade Stainless Steel Satin Finish Door Hinge of Approved Brand and shape without

bearings, approximate size 75 mm X 62 mm X 2 mm etc. complete with S.S. 202 Grade necessary S.S. self taping Rs. Two Hundred Nine & Paise Eighty

philip head screws etc. as per drawing and as directed by engineer-in -charge. Two Only

32 Providing & Fixing AISI 304 Grade Stainless Steel Satin Finish Door Hinge of Approved Brand and shape without

Rs. Three Hundred Ninety Two & Paise

bearings, approximate size 100 mm X 75 mm X 3 mm etc. complete with S.S. 202 Grade necessary S.S. self taping 123.00 NOS. 392.05

philip head screws etc. as per drawing and as directed by engineer-in -charge.

TOTAL SCHEDULE B COST RS.

Signature of contractor Executive Engineer

G.S.Police Housing Corp.Ltd.