Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹13.8 L+₹1.3 L (10.8%)Rejected-Finance 231 JAGGI GARDEN BALDEV NAGAR AMBALA CITY 134003 | AMBALA CITY | AMBALA | HARYANA | 134003 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
17 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF AMBALA
GE AF AMBALA
GE AF/AMB-20/2022-23 ADDITION AND ALTERATION TO BUILDING NO. P-206 IN TECHNICAL AREA AND CERTAIN MINOR WORKS AT AF STATION AMBALA UNDER GE (AF) AMBALA
2022_MES_565227_2
GE AF/AMB-T-20/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE AF AMBALA
ALL AS PER NIT AND TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE AF AMBALA
₹30,000
Yes
25 Feb 2023
29 Dec 2022
19 Jan 2023
29 Dec 2022
17 Jan 2023
3 Jan 2023
Amount
M & L for surface excavation over areas, not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, drains, etc. not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed
Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling complete all as specified and as directed
Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25cm deep as in any type of soil complete all as specified and as directed
M&L for Cement concrete in foundations, filling and mass concrete type D2 1:4:8 (40 mm graded aggregate )as in foundation complete all as specified and directed.
M&L for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete using M 25 cement concerte ( 20 mm graded aggregate) complete all as specified and directed.
M&L for Reinforced cement concrete (design mix) using M 25 cement concerte ( 20 mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for Reinforced cement concrete (design mix) using M 25 cement concerte ( 20 mm graded aggregate) in Beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and directed.
M&L for Reinforced cement concrete (design mix) using M 25 cement concerte ( 20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for Formwork over rough finished surface of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
M&L for Formwork over rough finished surface of concrete to sides of Square pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
M&L for Formwork over rough finished surface of concrete to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.
M&L for Formwork over rough finished surface of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L for Formwork over rough finished surface of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide complete all as specified and directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Material and labour for Brick work with sub class B bricks clay burnt brick of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
Material and labour for Brick work with sub class B bricks, fly ash bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.
Material and labour for rendering 15 mm thick in CM 1:4 mixed with WPC @ 2 % by weight of cement finished even and smooth without using extra cement on fair faces brick or concrete surfaces complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only.
Material and labour for rendering 5 mm thick in CM 1:3 on the soffits of slab/chajjas/sunshade etc finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 10 mm thick in CM 1:6 finished even and smooth without using extra cement on fair faces brick or concrete surfaces complete all as specified and directed.
M & L for Rendering 15mm thick in CM 1:3 with WPC @ 2 % by weight of cement on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra lime or cement)
Material and labour for APP polymeric water proofing treatment to roof, at any height, using membrane minimum 3 mm thick and weighting not less than 3.6 kg per sqm , black finish reinforced with non-woven polyster matt weighting not less than 150 gms per sqm with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 Ltr per Sqm, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side on transverse direction and 150 mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg per sqm below APP complete all as specified and as directed . Notes:- (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee (on account of any defect raised/noticed during a period of ten years) and shall be released after 10 years of completion of work. However contractor may deposit the FDR of same amount in favour of GE. If contractor fails to rectify the defect pointed out during this period , the defect shall be got rectified at contractor's risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.
Supply only integral water proofing compound complete all as specified and as directed.
Material and labour for two coats of Oil bound distemper of approved shade/tint over a coat of primer over JK/Birla white wall care putty of 3 mm thickness to achieve smooth finish on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.
M&L preperation of new plastered surface of ceiling and applying three coats of white wash on ceiling repairing with JK /Birla white putty complete all as specified directed.
M &L for two coat of weather proofing paint in camouflage pattern as per manufacturers instruction with all staging as required over one coat of primer including preparation of new wall surface complete all as specified and directed.
M&L for hardcore using broken stone or boulders Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and directed.
M &L for Cement concrete 100 mm thick type D- 2, 1:4:8(40mm graded aggregate) complete all as specified and directed.
M & L for Cement concrete 25 mm thick type B- 1, 1:2:4 (20mm graded aggregate) complete all as specified and directed.
Material and labour for 75mm thick PCC (1:3:6) type C-1 using 20mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed. Notes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length,12 mm wide. (ii) 50 mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume.
Material and labour coloured, non- skid joint free,edge cut, ceramic tiles,1st quality, 7 to 8 mm thick ,square/rectangular, polished, area of each tiles exceeding 0.11 but not exceeding 0.18 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:4, complete all as specified and directed.
Ditto all as per item No 04 here in above but in verticle surfaces with backing coat of 10 mm thick other than fair faces of wall in CM 1:4 complete all as specified and as directed.
Material and labour for glazed ceramic coloured tiles of size 300x450x7mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry & pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 on brick / concrete walls complete all as specified and directed
M&L for 16 -18 mm thick Granite stone slab as in shelves , over cooking platform ,machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigmentto match the shade of Granite stone including grinding and polishing laid over 20mm thick screed bed in cement mortar 1;6 including bull nosing of edges and gas pipe hole up to bottom of slab complete all as sspecified and as directed .
Taking down chowkhats or frames exc 1.5 but n.exc 4 sqm each with shutters without taking off shutters from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and as directed
S & F anodized aluminium door made out of hollow extruded aluminium section each door having 2Nos. Disc or D type handles, 2Nos aluminium tower bolts 200mm size, one brass mortice lock of six levers with key in duplicate to be fixed with aluminium hinges to the chowkhat shutter to be fixed with 5mm thick tinted glass and partly paneled with 12mm thick pre-laminated particle board fixed with glazing clips, rubber beading/gasket, anodized aluminium beading screws, etc. complete all as specified and as directed. Notes:(i) Drawings shall be referred at GE (AF) Ambala (ii) Minium thickness of anodisation shall be 15 microns (min) (iii) Details of members: Chowkhat frame - 101.6x44.45x1.5mm thickShutter vertical/style - 83.5x44.45x1.5mm thickShutter middle rail - 83.5x44.45x1.5mm thick
S&F anodized aluminium sliding window (Bombay sliding window) made out of hollow extruded aluminium sections as mentioned below and glazed with tinted glass 4mm thick fixed with glazing clips, rubber beading /gasket anodized aluminium beading screws and lock type handles of size 75mm 2Nos aluminium tower bolts 150mm long, etc. complete all as specified and as directed Notes: (i) Drawings shall be referred at GE (AF) Ambala (ii) Minimum thickness of anodisation shall be 15microns (min) (iii) Details of members: Shutter top & bottom rail - 101.6x44.45x 1.5mm thick Shutter inner lock rails - 37.5x15x1.5mm Shutter side mid rail - 37.5x15x1.36mm Chowkhat bottom rail - 50.3x26x1.2mm Chowkhat top & sides rails - 50.3x15x1.00m
S & F Powder coated Aluminium grill/Deco grill for Windows , Ventilators etc
Supply and fixing galvanised mild steel water tubes 15 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floor including cutting chasing for concealed whereas required complete all as specified and as directed.
Supply and fixing galvanised mild steel water tubes 20 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floor including cutting chasing for concealed whereas required complete all as specified and as directed.
Supply and fixing machine crafted box type cabinet for kitchen using 18-19 mm thick PVC board both side laminated with and including all necessary fitting and fixtures to install wire basket , shutter shall be fixed by using full overlay MS clips on hinges high quality nickle plated satin finish size- 101 mm -150 mm ,02 Nos per leaf ,including all fittings ,channels , 150 mm s/s handles complete all specified and directed . NOTE:- (i)Wire basket shall be measured separetely. (ii)Front area of box shall be considered for payment purpose. (iii) Depth of box shall be equal to the width of cooking platform.
Supply and fixing wire basket made of top quality 304 grade stainless steel, nickle chromium plated ( Ni 4%) of Approved design and pattern complete all as specified and directed.
Supply and fixing PVC water storage tank of 1000 ltrs capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20mm GI pipe connection including locking arrangement with 20mm ball valves high pressure with epoxy coated aluminium rod and high density plastic ball complete all as specified and directed.
Supply and fixing sink made of stainless steel 1.00 mm thick steel sheet, kitchen or laboratory with plug & chain, waste coupling, washers and 32 mm bore PVC waste pipe including bedding in cement mortar to dwarf wall or including fixing cantiliver MS/PVC brackets and connecting union to pipe over all size 495 mmx420mm bowl size 410x330x 160mm complete all as specified and as directed..
Supply and fixing bib taps long body 15 mm bore, brass, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
Supply and fixing Brass CP wall mixer 15 mm bore, brass, chromium plated, fancy type, with crutch or butterfly handle, screwed down for mixing hot and cold screwed for iron pipe or for brass ferrule complete all as specified and as directed.
Supply and fixing fancy type stop valve/angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes of 15mm bore complete all as specified and directed.
S&F 20mmdia Gun-metal, globe or gate valves, with iron wheel head, screwd both end for iron pipe and fixed
Supply and fixing UPVC floor trap 75mm dia plain with PVC grating,type-B pipes including jointing to waste pipe with solvent cement complete all as specified and as directed.
Supply and fixing PVC connection 450mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified and directed
Supply and fixing chromium plated grating 100mm dia fixed complete all as specified.
M&L for RCC PIPE CLASS NP2 150mm bore including jointing of pipe in CM 1:1, haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40mm graded stone agg connection after cutting into existing sewer line/manhole to make it functional complete all as specified.
M&L for cement concrete 1:2:4 type B0 ( using 12.5 mm graded stone aggregate ) as in coping, for water trough and the like including weathering , slightly rounded or chamfered angles and throating etc incl necessary form work etc complete all as specified and directed
M&L Precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) set in cement mortar 1:4 for drain covers,man holes cover etc.(Reinforcement shall be measured separately)
M&L for cutting existing steel tubing for alterations or additions of new pipe line of size upto 50mm bore GI pipe complete all as specified and directed.
M&L for Gavanized steel water tubing medium grade with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connectors back-nuts, caps, plugs, diminishing pleces and sockets etc as per site requirement of 25mm dia GI pipe line Complete all as specified and directed.
M&L for Gavanized steel water tubing medium grade with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connectors back-nuts, caps, plugs, diminishing pleces and sockets etc as per site requirement of 40mm dia GI pipe line Complete all as specified and directed.
M&L for Gavanized steel water tubing medium grade with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connectors back-nuts, caps, plugs, diminishing pleces and sockets etc as per site requirement of 50mm dia GI pipe line Complete all as specified and directed.
S&F gate valve heavy duty gun metal full way with iron wheel head screwed both ends ISI marked of size 25mm dia
S&F gate valve heavy duty gun metal full way with iron wheel head screwed both ends ISI marked of size 40mm dia
S&F gate valve heavy duty gun metal full way with iron wheel head screwed both ends ISI marked of size 50mm dia
M&L for sub main wiring with 2 runs of single core PVC insulated FRLS unsheathed multi stranded copper conductor cables of size 4sqmm drawn through and including non metallic rigid PVC conduits/ casing and caping of suitable size with all necessary fittings and provision of one run of 4sqmm PVC insulated unsheathed multistranded copper conductor single core for earth continuity and connected to common earth dolly, complete all as specified and directed.
S&F Sheet metal enclosure MCB DB SPN 2 way without bus bar single door type and including 2nd class hard wooden board 4cm depth with sunmica top of suitable size to fix the MCB DB, complete all as specified and as directed.
S&F Isolator SPN capacity upto 40A, C series 50HZ AC supply complete all as specified and directed
M&L for fabricated from MS structural steel sections viz channel, angle, flats and plates welding, bending, any shape and size as indicated or directed for Pump/ Motor/ chlorinator panel shed, PVC water storage tank stage as required complete all as specified and directed.
S&F fixed copper strip of size 20x3mm complete with saddles and base insulators (make out of porcelene/PVC) and fixing screws on roof and down side conductors complete all as specified and directed.
M&L for earthing using GI earthing strip 32x6mm with galvanised steel earth plate electode 600x600x6mm thick buried directly in ground, earth pit not less than 2.25m deep below ground level connection to and including GI strip of size 32x6mm extended to 7.5m as earth lead by means of GI bolts, nuts, etc. with provision of charcoal and salt all as per electrical plate No. 3 of SSR Part-I including water arrangement with GI pipe 20mm dia (medium grade), earth lead protection pipe 40mm light grade with bends, elbow, etc. from earth plate to test point, excavation and earthwork in any type of soil, returning, filling, ramming and removing of soil to distance not exceeding 50m, make good to match with existing surface making PCC pit (earth chamber) having internal size 300x300x300mm and outer size 600x 600x600mm with RCC reinforced cover 50mm thick and testing on completion including making test points on wall as per SSR specifications, taking down and disposing off old earthing complete all as specified and as directed
Notes for serial item No. 69: (i) The cost of copper / GI earth continuity wire with GI pipe 40mm light grade upto 7.5m is deemed to be included (ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item (iii) Earthing shall produce desired earth resistance values as directed by the Engineer-in-charge
Supply, installation, testing and commissioning maintenance free tripod chemical earthing system consisting of 3Nos. of solid copper earth rod of 17.2mm dia and 3m long made of high tensile low carbon steel, molecularly bonded with 99.9% electrolyitc grade copper on outer surface having 250microns (minimum thickness) with exothermically jointed copper bus bar of 150x50x5mm for long lasting and connecting each copper rod and the exothemically jointed bus bar, both CPRI tested on at least 25kA fault current ensuring high current carrying capacity of the system and earth rod should be certified by laboratories confirming to comply with UL 467 international standards grounding and bonding equipment and each rod should be used with minimum 50kg earth enhancing compund that should be ROHS tested and have passed leaching sulpher, corrosion, resisitivity test shall be less than 0.05lhm mtr and international standard for earth enhancement compound by NABL acredited laboratory and each rod should be interconnected with 20x3mm copper strip at the distance of 3m to make a shape of traingle with top of the bore finished with 40mm thick PCC in 1:2:4 type B-1, 75mm thick PCC in 1:4:8 type D-2 and back fill/JAM compund shall be covered with advanced polymer pit cover of 30x30cm including taking down & disposing off old earthing size complete all as specified and as directed
Notes for item No. 101: (i) The earthing shall comply to IS 3043, UL 467, BS/EN50164-7 (ii) The earth resistance shall be less than 01Ohm. A guarantee for 3years of this criterion on a Rs. 100 stamp paper shall be given by the Contractor. The quoted rate shall be deemed to be inclusive of this aspect (iii) To obtain earth resistance less than 01Ohm, if a combination two or more earthings are to be inter-connected or the length of the electrode/s is/are to be increased it shall be measured and paid as one earthing only (iv) Testing of earthing shall be carried out in presence of Departmental rep and requisite test reports shall be submitted (v) Cost of all excavation & earthwork required shall be deemed to be included in the quoted rate
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire amoured, electric power cables (heavy duly) 1100 volts grade with standed aluminium conductor of size 16sqmm 2 core in duct/trench/wall/floor etc with necessary clamp as required at site complete all as specified and directed.
M&L sand cushioning 15cm below 8cm above the U/G cable and punned to 18cm which shall be measured for payment complete all as specified
M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class 'B' laid dry and flat abutting eachg other with width equal tolength of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed
M&L for earthing with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4mm dia upto 7.5m long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No. 3 of MES SSR Part-I and testing on completion including necessary excavation and earthwork in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC slab 50mm thick in cement concrete (1:2:4), type B1, reinforced with welded steel wire fabric or XPM (weight not less than 4kg/sqm) with cast iron frame, funnel with watering pipe 20mm dia medium grade,wire mesh and lugs, GI protection pipe,15mm dia, light grade, 7.5m long for protection of earth lead upto test point, etc. complete all as specified and as directed
Notes for serial item No. 13: (i) The cost of GI earth continuity wire with GI pipe 15mm light grade upto 7.5m is deemed to be included (ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item (iii) The earth result should be less than 4Ohm and the result will be checked in presence of MES Rep.
M&L for concealed point wiring complete with 1.5Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including non metallic rigid PVC conduit, medium grade minimum 19mm dia ISI marked and conduit accessories fixed concealed in wall with sunken type pressed steel/ welded MS terminal boxes made out of 1.6mm MS sheet, 3mm thick laminated sheet top cover for mounting of fitting, switches, sockets outlets, regulators etc complete including provisining of 1.5sqmm FRLS PVC insulated unsheathed cable 1100 volt grade withy multi stranded copper conductor to common earth and connected to earth dolly for the following
One light/ Exhaust fan controlled by one switch 6Amp one way complete
One 3pin switch socket combination 6Amp on the independent board complete
All as per serial item No.78 but point wiring with 2.5sqmm single core multi stranded copper conductor FRLS PVC insulated & unsheathed cable 1100 volt frade and 1.5sqmm FRLS PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16Amp multi purpose socket combination point on independent board.
S&F switch piano flush type single pole, one way 5Amp complette all as specified and directed.
S&F switch piano flush type single pole, one way 15Amp complette all as specified and directed.
S&F socket outlet 2 in 1, 5pin 5 A flush type complete all as specified and directed
S&F socket outlet 2 in 1, 6pin 15A flush type complete all as specified and directed
S&F ceiling rose 65x60mm three terminals 230volt complete all as specified and directed.
S&F sheet metal enclosure MCB distribution board 230volt single pole and netural 4way double door type with 200Amp rated bus bar concealed in wall including making the surface good complete all as specified and directed
S&F MCB single pole and neutral 240 volts, 32 to 40A, 10KA, B curve complete all as specified and directed
S&F MCB single pole and neutral 240 volts, 6 to 40A, 10KA, B curve complete all as specified and directed
S&F LED light fitting 1x20W, 220V, AC decorative box type with driver holder including LED tybe light connecting up with three core flexible copper conductior cable of suitable size from ceiling rose complete all as specified and directed
S&F exhaust fan, steel body AC single phase, 230V of size 300mm sweep with blades and frame and louvers complete all as specified and directed
S&F metal body exhaust fan 300mm sweep single phase 230 volts with louvers shutter complete including making hole of suitable size in wall and make good the disturbed surface complete all as specified and directed by Engr-in-charge.
S&F metal body exhaust fan 380mm sweep single phase 230 volts with louvers shutter complete including making hole of suitable size in wall and make good the disturbed surface complete all as specified and directed by Engr-in-charge.
M&L for point wiring on wall/ surface in PVC conduit/ casing caping of size 20mm complete with 1.5Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100volts grade drawn througth PVC conduit/ casing caping including provisining of 1.5Sqmm FRLS PVC insulated unsheathed cable 1100volt grade with multi stranded copper conductor to common earth and connected to earth dolly with sunken type pressed steel/ welded MS terminal boxes made out of 1.6mm MS sheet, 3mm thick laminated sheath top cover for mounting of fittings, switches, sockets outlets, regulators etc complete for the following
M&L switch piano flush type single pole, one way 6Amp
S&F ceiling rose 65x17mm of three terminals
Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality EER 3.2 of capacity 1.5TR Note: Installation and carrying change must be included in the quoted ratge by the contractor
Point wiring compelte with 2run of 4sqmm single core PVC insulated heavy duty ISI, Marked unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including suitable size of PVC white non metalic conduit with all accessories like tee, straight joint L bend etc. concealed on wall surface on ceiling/ roof etc. and including provision of PVC conductor and connected to common earth dolly, including suuitable size of sheet metal box 1.6 mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing the switches/ socket outlets. metal clad plug and socket, 15Amps S/S outlet
S&F single pole and and netural enclosure with a two pin and earth plug and socket compete with one single pole MCB complete all as specified and directed by E-in-charge.
Supply, lowering installation, testing and commissioning of submersible pump set complete with 3 phase submersible electric motor coupled with the pump having 480LPM discharge at 117mtr head suitable for bore of 200mm dia (the capacity of motor and pump shall be suitable to give a required discharge at the required head. Make: Kirloskar (Model KS8E-2507-8 inch) or equivalent, Beacon, KSB, Grandfos, Wasp ITT
Bairagi Builders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .