ADDN / ALTN TO DSC LIVING IN BILLETS, SPECIAL REPAIR TO E/M INFRASTRUCTURE AT JAMNAGAR AND BER SUMMER APPLIANCES AT KHAMBHALIYA AND DWARKA AND PROVN OF ANTI SUICIDE FAN RODS AT AF STATION JAMNAGAR UNDER GE (AF) JAMNAGAR NO.2

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cn deep and getting out in soft / loose soil complete all as specified and directed.

Removing excavated soils exc 1.5 Km but not exc. 5 Km and depositing where directed.

M&L for hardcore of gauge n exc. 63 mm, with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed.

M & L for plain cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M & L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 25mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channel and drains, complete all as specified and directed.

M & L for providing, cement concrete in coping or mud stops, rounded or chamfered on edges type B0 1:2:4 (using 12.5mm graded stone aggreagte) complete all as specified and directed.

Returning, filling including spreading, watering and well ramming in layers n.exc 25 cm in soft / loose and hard/dense soil complete all as specified and directed.

M & L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 type C1 (1:3:6) (using 20mm graded stone aggreagate) complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 using on other than fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new undecorated surface of wall and applying two coats of cement base paint complete all as specified and directed.

M & L framed work such as grills, gratings, other section etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161:1979 grade St.-240 complete all as specified and directed.

M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Demolition of brick work / stone work / PCC block masonry built in cement mortar complete all as specified and directed.

Forming jambs, with cement mortar 1:6 etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for 25 mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling course complete all as specified and directed.

M&L for non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 to 8 mm thick of size exc 0.06 sqm but n exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 300 x 450 x 7mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat of mortar in CM 1:4 for laying wall tiles finishes complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through out the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6 Nos screws to be provided for each frame complete all as specified and directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

S&F 75mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised complete all as specified and directed.

S & F 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

M&L for pre-cast RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover slab for Shelf and similar works supported on walls set in cement mortar 1:6 complete all as specified and directed. Note:- Reinforcement steel will be measured & paid separately.

M & L for mild steel TMT bars 10 mm dia, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F 15 mm size bib cock long body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S&F 15 mm size angle cock, cast copper alloy, chromium plated with long shank, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.

Supply and fix 15 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concealed or exposed /ceiling or laying in floors complete all as specified and directed. Note:- Cutting chease wherever required will be measured & paid separately.

M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete all as specified and directed.

Supply and fix 10 litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle, flush pipe 32 mm, PVC connection 450 mm fixed in position and connecting complete all as specified and directed.

S&F white vitreous china wash down water closet (pedestal pattern) with fixing bolt, with plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connections complete all as specified and directed.

S&F white vitreous china wash hand basin of size 550 x 400 mm, fixed over & including MS brackets comprising of the following items :- (a) Waste fitting 32 mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete. (b) 15 mm size Pillar tap fancy typev cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe complete. (c) LDPE/PVC waste pipe 32 mm dia 1000 mm long complete.

S&F 15mm PVC connection 45 cm long between ends with PTMT nut and washer complete all as specified and directed.

S & F Health faucet brass chromium plated with flexible pipe, one GI tee and one angle cock brass chromium plated 15 mm bore complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore in any length with rubber joints, laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) bend any radious 110mm dia fixed complete all as specified and directed. (Note:- Building shall be considered upto G+2)

S&F PVC (SWR) pipe 75mm bore in any length with rubber joints, laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) bend any radious 75mm dia fixed complete all as specified and directed. (Note:- Building shall be considered upto G+2)

S&F grating doom 125mm dia with waste hole of PTMT, fixed complete all as specified and directed.

Material and labour for 8 to 9 mm thick pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main tee, 23.50 x 23.50 x 1.5mm cross tee and 25 x 25 x 1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. Note : The rate inclusive of scaffolding and necessary arrangements.

M & L for powder coated aluminium ventilators any colour (thickness of powder coating not less than 50 micron) anodised aluminium partitions, with using aluminium section weighing 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, sliding chanel witth roller, anodized aluminium snap beading screws etc inculding frosted glass 4 mm thick and fixed with wall complete all as specified and directed.

Supply and fixing Exhaust fans AC single phase, 230/240 volts, 50 Hz, 300mm sweep metal body, 1400 RPM with louvers complete all as specified and directed. including taking down old unsv, complete all as specified and directed.

S & F energy efficient BLDC Ceiling Fan, 1200mm sweep, AC single phase, 230 volts, 50 Hz, and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to ceiling fan complete in all respect and all accessories including taking down old unsv fan, complete all as specified and directed.

Supply & Fixing 5 star rated electric storage water heater (vertical type) 25 Ltr, 230 V, AC, Single phase power input 2000w,standing loss in kWh 24 (hours) 45°C 0.511 kWh with and including connecting fastners nuts not less than 100 mm with suitable nut, bolt & washers grouted in walls with complete masonary work for proper mounting of Geyser fastning bolts etc as directed as site reqmt and making necessary inlet and outlet PVC water connection 450/600mm dia (02 Nos) as well as electric connection including testing on load for entire satisfaction of Engineer-in-Charge. including taking down old unsv, complete all as specified and directed.

Supply and fix water cooler electric driven (single phase), having approx storage capacity of 150 litre and nominal cooling capacity of 150 litres per hour including taking down old unsv, complete all as specified and directed.

Supply, Installation / fixing, testing and commissioning of room air conditioner unit of 1.5 TR capacity (Split type unit comprising of indoor and outdoor unit) electric driven (single phase 230 Volt, 50 Hz) and with inbuilt air ioniser and plasma filter for better indoor air quality with minimum BEE 5 star rating and EER 3.2, including necessry fixing arrangements complete (indoor unit at suitable place and height inside the room and outdoor unit at suitable place outside the room) including metallic bracket with fixing bolts for outdoor unit, insulated piping etc. all as specified and directed including taking down old unsv, complete all as specified and directed. Note: (i) Aircoditioner shall be initial filled/charged with refrigerant of specified quanty. (ii) Additional refrigerant pipes required beyond as supplied by manufacturers deemed to be included in AC rate. (iii) Suitable piping shall be provided of adequate length of size 5/8" for draining of condensate water from indoor unit. (iv) Split type AC unit to supplied with cordless remote control for operation. (vi) The condensing unit shall be of copper.

Supply, install and testing 5 KVA wall mounted voltage stabilizer for automatic operation, single phase, naturally air cooled, indoor type & designed for input variation between 195 V to 280 V with output voltage stabilized at 220 with accuracy ± 1% and speed of correction 8 Volts per second and of capacity including taking down old unsv, complete all as specified and directed.

Supply and fix refrigerator, electric driven (single phase), 180-195 Ltr capacity, BEE minimun 3 star rated, including taking down old unsv, complete all as specified and directed.

Supply, install and testing 3 KVA wall mounted voltage stabilizer for automatic operation, single phase, naturally air cooled, indoor type & designed for input variation between 195 V to 280 V with output voltage stabilized at 220 with accuracy ± 1% and speed of correction 8 Volts per second and of capacity including taking down old unsv, complete all as specified and directed.

Supply and fixing Anti-suicide fan rod 15mm dia, GI tubing medium grade 45cm to 60cm long as required fixed in replacement at site including minor works regarding the fixing of rod deemed inclusive in the quoted rate complete all as specified and directed.

Supply and connection in repair PVC insulated, PVC sheathed three core copper conductor cable multi stranded of size 0.5 Sqmm for connecting of fan from ceiling rose complete all as specified and directed.

Dwarka and Khambhaliya Area

Supply and install 1.5 TR hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating complete all as specified and directed.

Supply, installation, commissioning of Water cooler partially stainless steel, electric driven single phase having approx storage and nominal cooling capacity 40/80 ltr complete all as specified and directed.

Supply and fix voltage stabilizer for Split AC of 5 KVA complete all as specified and directed.

Supply and fix voltage stabilizer for water cooler of 2 KVA complete all as specified and directed.

DWARKADHISH ENTERPRISE (BID ID -3111376)

Prime Decor (BID ID -3110577)

SWASTIK ENTERPRISE (BID ID -3123585)

SURESH ELECTRICALS (BID ID -3123535)

Nitesh Enterprise (BID ID -3100163)