Loading
Loading…
Loading…
Tender Value
₹1.9 Cr
EMD Value
₹3.7 L
Closing Date
16 Apr 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
16 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The individual / firm should have minimum Valid B grade electrical license and the license should be on their own name/Firm name issued by the Competent Authority. A copy of license should be uploaded through IREPS with their offer, failing which the tender will be rejected.
Definition for SIMILAR NATURE OF WORK (Ref: CEE/SCR Letter no. E.29/P/Similar nature of works dt: 30.12.2014) "Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc (with or without supply of items/ equipments) for 230V, 1phase or 415V, 3phase system or higher voltages."
44 conditions · 4 needing a document upload
Contractor should have GST Registration and Certificate should be submitted along with tender. The Tenderer should be GST Compliant. No Bills will be acceptable without GST Registration, which is mandatory after starting of GST Implementation. Responsibility for remitting the GST lies with the Tenderer. This GST will be reimbursed on submission of proof of payment to the Government at prevailing rates for this work.
The contractor should have PAN card, they should attach copy of PAN card
The contractor has to submit the certificates required as per Tender document in support of their legal authority to participate in the tender in favor of the individual to sign the tender on behalf of the tenderer and create liability against them.
The tenderer should submit the copy of ANNEXURE-V online
The tenderer should submit the copy of ANNEXURE-VA online(if applicable)
The tenderer should submit the copy of an undertaking that the tenderer is not blacklisted or debarred by Railways or any other Ministry /Department of Govt. of India from participation in tender on the date of opening of bids [PDF file to be uploaded].
The tenderer should submit the copy of filled up & duly signed PART-I, PARTII, PART-III (A) & PART-III(B) of Tender Document [PDF file to be uploaded].
If the Bid of a Tenderer is seriously unbalanced in relation to the Engineers estimate of the cost of work to be performed under the contract, the Railways may require the tenderer to produce detailed price analysis for any or all items of the Tender Schedule, to demonstrate the internal consistency of those prices with the construction methods and schedule proposed.
STATUTORY VARIATION CLAUSE: Any addition or variation of statutory taxes, levies and duties after the date of opening of tender shall be paid to the contractor after production of necessary document proof. Similarly benefit of reduction/abolition of duties, taxes or levies, if any, should be passed on to Railway.
The tenderer should submit the copy of filled up & duly signed (NEFT)MANDATE FORM-NEW (ANNEXURE-IV) along with tender
The tenderer should submit the copy of filled up & duly signed ANNEXURE-VI, along with tender[PDF file to be uploaded].
The contractor should have to pay statutory payments like EPF, ESI & Bonus etc., to the contract staff engaged for the subject work without fail and proof of such payments made shall have to be submitted to railways along with the bills for ensuring the compliance. However, Railways will not reimburse the same to the contractor.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The General Conditions of Contract governing the performance of the works covered by this tender are the Indian Railway Standard General Conditions of Contract as amended from time to time up to date. A soft copy of the Indian Railway Standard General conditions of Contract is uploaded in the annexed documents to the tender. Hard copy may be perused in the office of the Assistant Divisional Electrical Engineer/Carriage Repair Shop/Tirupati. Insubmitting his tender it would be deemed that the tenderer has kept himself fully informed of the provision of the IRS General conditions of Contract including all corrections and Amendments issued up to date and claim that he is not aware of any amendment or correction slip to the IRS GCC shall not be entertained
CORRIGENDUM NOTICE ON IREPS: [I]Railway may modify the tender document by issuing online corrigendum through www.ireps.gov.in [II] Prospective Bidders shall keep watch for CORRIGENDUM upto 15 days prior to the deadline for submission of bids. For the purpose of CORRIGENDUM in the tender, NIT period is splitted as under: (a) ADVERTISEMENT PERIOD: The time during which all information pertaining to tender shall be available but offers cannot be submitted (b) OFFER SUBMISSION PERIOD: 15 days prior to closing of tender, during which tenderers can submit their offer. [III]To give prospective bidders a reasonable time on account of CORRIGENDUM in preparing their bids, the Railways may at their discretion extend as necessary, the deadline for submission of Tender document. Railways decision will be final and no correspondence will be entertained from prospective bidders
Tenderer is instructed to carefully go through the Tender Schedule/Scope of Work, Measurement of Work & also visit the Site, before quoting his own percentage rates
Conversion of OH lines to UG cables in west colony to improve reliability of power supply arrangements at carriage repair shop, Tirupati
CRS-E-15-25-26
CRS-E-15-25-26
Open
Works - General
90 Days
Tirupati, Andhra Pradesh
₹0
₹3.7 L
16 Apr 2026
25 Mar 2026
2 Apr 2026
77 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,86,00,143.5 | ||
| — | 1.00 | — | — | ||
| Design, fabrication supply and erection of 14/16 SWG CRCA Sheet Indoor Cubicle Panel consisting the following items (CRCA) Income-(1) 800A 4P 50KA ACB Microprocessor EDO- 02No. Metering :(1)MFM Meter-02No,(2) RYB Indication Lamps 02Sets,(3) 6A SP MCB-06Nos, (4) 800A /5A Ct's- 6Nos. Busbar:(1)1Set 1600A TPN Copper Bus bar. Outgoing:(1) 630A 4P 50KA MCCB Microprocessor Release 01No, (2)315A FP 36KA MCCB Microprocessor Release-02Nos(3) 250A FP 36KA MCCB Microprocessor Release-01Nos, (4) 100A FP 36KA MCCB Adjustable Thermal Magnet- 04Nos, (5) 63A FP 25KA MCCB Adjustable Thermal Magnet-03Nos, & (6) 32A FP 10KA MCB 02Nos. (7) 630A Change Over Switch for DG. Provide Extended Rotary Handles, Spreaders and MFM meters for all the MCCBs. Note: before supply of panel, Electrical drawing approval necessary. | — | — | — | 17,73,500 | |
| — | 1.00 | — | — | ||
| Design, fabrication, supply and erection of 14/16 SWG CRCA Sheet LT Cubicle panel comprising of 630A 50KA MCCB Microprocessor Release -01 No. 1 Set 1200A TPN Copper Bus bar. with Metering :(1)MFM Meter-01No,(2) RYB Indication Lamps 01Sets,(3) 6A SP MCB-03Nos, (4) 630A /5A Ct's-03Nos. 1)250A 4P 36KA MCCB-2 No's, 2)63A 4P 25KA MCCB -01 Nos. 3)315A 4P 36KA MCCB- 02 Nos. 4)200A 4P 36KA MCCB-02 No's, 5)400A 4P 36KA MCCB-01 Nos. and all accessories for MCCB (i.e. Extended Rotary Handles And Spreaders) | — | — | — | 7,63,300 | |
| — | 1.00 | — | — | ||
| Design, fabrication, supply and erection of14/16SWG CRCA Sheet LT Outdoor Cubicle panel comprising of 400A 4P 36KA MCCB Microprocessor type -01 No. with Metering 1)MFM Meter- 01No,(2) RYB Indication Lamps 01Sets,(3) 6A SP MCB-03Nos, (4) 400A /5A Ct's-03Nos,1) 100A 4P 25KA MCCB Adjustable Thermal Magnet -09 Nos. and all accessories for MCCB (i.e. Extended Rotary Handles And Spreaders) 1 Set 250A TPN Copper Bus bar rate also. | — | — | — | 3,58,000 | |
| — | 1.00 | — | — | ||
| Design, fabrication, supply and erection of14/16SWG CRCA Sheet LT Outdoor Cubicle panel comprising of 400A 4P 36KA MCCB Microprocessor type -01 No. with Metering 1)MFM Meter- 01No,(2) RYB Indication Lamps 01Sets,(3) 6A SP MCB-03Nos, (4) 400A /5A Ct's-03Nos,1) 100A 4P 25KA MCCB Adjustable Thermal Magnet -08 Nos. and all accessories for MCCB (i.e. Extended Rotary Handles And Spreaders) 1 Set 250A TPN Copper Bus bar rate also. | — | — | — | 3,44,000 | |
| — | 2.00 | — | — | ||
| Design, fabrication, supply and erection of14/16SWG CRCA Sheet LT Outdoor Cubicle panel comprising of 200A 4P 36KA MCCB Microprocessor type -01 No. 1 Set 400A TPN Copper Bus bar with Metering 1)MFM Meter-01No,(2) RYB Indication Lamps 01Sets,(3) 6A SP MCB-03Nos, (4) 200A /5A Ct's-03Nos,1) 63A 4P 25KA MCCB Adjustable Thermal Magnet -08 Nos. and all accessories for MCCB (i.e. Extended Rotary Handles And Spreaders) 1 Set 250A TPN Copper Bus bar rate also. | — | — | — | 6,22,000 | |
| — | 1.00 | — | — | ||
| Design, fabrication, supply and erection of14/16SWG CRCA Sheet LT Outdoor Cubicle panel comprising of 250A 4P 36KA MCCB Microprocessor type -01 No. 1 Set 400A TPN Copper Bus bar with Metering 1)MFM Meter-01No,(2) RYB Indication Lamps 01Sets,(3) 6A SP MCB-03Nos, (4) 200A /5A Ct's-03Nos,1) 63A 4P 25KA MCCB Adjustable Thermal Magnet -08 Nos. and all accessories for MCCB (i.e. Extended Rotary Handles And Spreaders) 1 Set 250A TPN Copper Busbar rate also. | — | — | — | 3,15,000 | |
| — | 8.00 | — | — | ||
| Design, Supply, reaction, testing and commissioning of meter 16 SWG CRCA Sheet LT Cubicle panel for provision of 12 Nos of energy meters with 32A DP MCB for each meter, one chamber for timer control relay. Provision of 100A 4P MCCB and three phase copper busbar with suitable current carrying capacity for tapping supply for each single phase meter with necessary copper wiring from busbar to each meter to be provided in the panel. Note: energy meters will be supplied by railway authorities. | — | — | — | 6,72,000 | |
| — | 7.00 | — | — | ||
| Design, Supply, reaction, testing and commissioning of meter 16 SWG CRCA Sheet LT Cubicle panel for provision of 8 No's of energy meters with 32A DP MCB for each meter, one chamber for timer control relay. Provision of 100A 4P MCCB and three phase copper busbar with suitable current carrying capacity for tapping supply for each single phase meter with necessary copper wiring from busbar to each meter to be provided in the panel. Note energy meters will be supplied by railway authorities. | — | — | — | 3,92,000 | |
| — | 9.00 | — | — | ||
| Design, Supply, reaction, testing and commissioning of meter 16 SWG CRCA Sheet LT Cubicle panel for provision of 4 No's of energy meters with 63A DP MCB for each meter, one chamber for timer control relay. Provision of 100A 4P MCCB and three phase copper busbar with suitable current carrying capacity for tapping supply for each single phase meter with necessary copper wiring from bus bar to each meter to be provided in the panel. Note energy meters will be supplied by railway authorities. | — | — | — | 3,78,000 | |
| — | 1.00 | Lumpsum | — | ||
| Dismantling of Existing LT Panel with associated switchgear and the same should be Handed over to concerned site Engineer at his Store | — | — | — | 55,000 | |
| — | 1000.00 | — | — | ||
| Supply of 4core 400 mm² LT XLPE aluminium UG Cable, 1100 Volts asper IS:7098/Pt.I/1988 or latest. | — | — | — | 23,56,000 | |
| — | 1000.00 | — | — | ||
| Laying of 4 core 400 sq.mm multistrand LT XLPE cable, connecting with suitable glands connectors etc. Testing and commissioning of LT XLPE cable as per directions of the engineer at site. | — | — | — | 1,45,000 | |
| — | 750.00 | — | — | ||
| Supply of 4core 240 mm² LT XLPE aluminium UG Cable, 1100 Volts asper IS:7098/Pt.I/1988 or latest. Makes : Polycab / Havells / Gloster / KEI/ Finecab | — | — | — | 7,79,250 | |
| — | 750.00 | — | — | ||
| Laying of 4 core 240 sq.mm multistrand LT XLPE cable, connecting with suitable glands connectors etc. Testing and commissioning of LT XLPE cable as per directions of the engineer at site. | — | — | — | 93,750 | |
| — | 3000.00 | — | — | ||
| Supply of 4core 120 mm²LT XLPE Al. UG Cable, 1100Volts as perIS:7098/Pt.I/1988 or latest Makes : Polycab / Havells / Gloster / KEI/ Finecab | — | — | — | 22,59,000 | |
| — | 3000.00 | — | — | ||
| Laying, connecting, testing and commissioning of 4core 120 mm² LT XLPE Al. UG Cable, 1100 V as perIS:7098/Pt.I/1988 or latest | — | — | — | 1,44,000 | |
| — | 500.00 | — | — | ||
| Supply Laying, connecting, testing and commissioning of 4core 95 mm²LT XLPE Al. UG Cable, 1100Volts as perIS:7098/Pt.I/1988 or latest Makes : Polycab / Havells / Gloster / KEI/ Finecab | — | — | — | 3,47,000 | |
| — | 5000.00 | — | — | ||
| Supply Laying, connecting, testing and commissioning of 4core 50 mm²LT XLPE Al. UG Cable, 1100Volts as perIS:7098/Pt.I/1988 or latest Makes : Polycab / Havells / Gloster / KEI/ Finecab | — | — | — | 13,90,000 | |
| — | 2500.00 | — | — | ||
| Supply of 4core 16 mm²LT XLPE Al. UG Cable, 1100Volts as perIS:7098/Pt.I/1988 or latest Makes : Polycab / Havells / Gloster / KEI/ Finecab | — | — | — | 4,37,500 | |
| — | 2501.00 | — | — | ||
| Laying, connecting, testing and commissioning of 4core 16 mm² LT XLPE Al. UG Cable, 1100 V as perIS:7098/Pt.I/1988 or latest | — | — | — | 22,509 | |
| — | 6000.00 | — | — | ||
| Excavation of cable trench in all types soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works. | — | — | — | 8,04,000 | |
| — | 1000.00 | — | — | ||
| Excavation of cable trench duly breaking the existing cement concrete flooring and filling with layer of sand bricks etc., as per the standards of cable laying (A minimum of 1 mtr depth and 400 mm width) and filling the trench with soil duly ramming etc. The flooring shall be made good with cement concrete as original by the contractor after completion of trenching work up to the satisfaction of the Engineer at Site. The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 3,65,630 | |
| — | 200.00 | — | — | ||
| Excavation of cable trench in Tar road surface as per the Rly specification No:C/E/UGC/1/92& Drg No:SC/A3/STD /1288 Alt-I | — | — | — | 79,200 | |
| — | 1500.00 | — | — | ||
| Supply and erection of 50mm size of HDPE pipe of Grade PE-80, PN 4 (6Kg/Cm2 Capacity) with accessories | — | — | — | 1,39,500 | |
| — | 1500.00 | — | — | ||
| Supply and erection of 63 mm size of HDPE pipe of Grade PE-80, PN 4 (6Kg/Cm2 Capacity) with accessories | — | — | — | 1,71,000 | |
| — | 2500.00 | — | — | ||
| Supply and erection of 110 mm size of HDPE pipe of Grade PE-80, PN 4 (6Kg/Cm2 Capacity) with accessories | — | — | — | 7,15,000 | |
| — | 100.00 | — | — | ||
| Supply and fixing of cable route indicators etc. Including all accessories. | — | — | — | 25,100 | |
| — | 50.00 | — | — | ||
| Supply, Transportation of 5mtr long hot dip galvanised octagonal pole (IS 875) with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet (S 355 JO steel plate for shaft), along with base plate IS 2062 of size 200x200x12mm, M16x600 long J type ENS grade foundation bolts, 1000mm long Double/Single arm bracket Including the Supply of Suitable bolts with Bakelite Sheet with MCB (for mounting inside the base compartment of pole) complete. Make: Bajaj/Valmont/Trans rail /Skipper/Laasma | — | — | — | 6,08,292 | |
| — | 50.00 | — | — | ||
| Erection & commissioning of 5 mtr. octagonal pole including concrete foundation & plinth in hard soil including excavation of soil, tamping of concrete, grounting and supply of other | — | — | — | 1,52,073 | |
| — | 50.00 | — | — | ||
| Service connection to the fitting from the junction box of 5 mtrs Octagonal pole by means of PVC insulated copper conductor of 3 core 1.5 Sq mm with necessary lugs at the junction box and necessary termination at the luminaire complete. | — | — | — | 20,038.5 | |
| — | 100.00 | — | — | ||
| Supply, fixing, testing and commissioning of 30W AC LED street light luminaries IP65 including all connected accessories etc.as per PCEE/SCR latest specification No-SCR/LED(OD) LIGHT FITTINGS/001(Amdt.5)-2023 or latest | — | — | — | 2,44,600 | |
| — | 125.00 | — | — | ||
| Dismantlement of LT OH mains including Guarding, insulators, cross arms etc. on RCC/RSJ/PSCC/DP/Tower and handing over the same to concerned supervisors of supply authorities at his store. Note: All released materials are to be handed over to the concerned supply authorities and acknowledgements are to be furnished along with final bill (Per Each Span) | — | — | — | 1,77,000 | |
| — | 125.00 | — | — | ||
| Dismantling of Poles (tubular) / Rail Poles | — | — | — | 62,585 | |
| — | 5.00 | — | — | ||
| Supply, fixing, connecting and commissioning of SMC cable termination junction Box of size 340x200x105 with shock proof, rust proof, fire resistant, weather proof with IP65 protection suitable for termination of 2/4 core LT UG cables upto 150sq.mm., 3 phase 415 volts including hylam sheet, heavy duty terminal connections, clamping arrangements | — | — | — | 26,865 | |
| — | 5.00 | — | — | ||
| Supply, fixing, connecting and commissioning of SMC cable termination junction Box of size 250x200x105 with shock proof, rust proof, fire resistant, weather proof with IP65 protection suitable for termination of 2/4 core LT UG cables upto 70 sq.mm.,3 phase 415 volts including hylam sheet, heavy duty terminal connections, clamping arrangements | — | — | — | 23,865 | |
| — | 8.00 | — | — | ||
| Supply and fixing of 120W LED Flood light fitting as per latest CEE spec with all connected materials complete | — | — | — | 58,920 | |
| — | 2.00 | — | — | ||
| Supply, installation and fixing of 9meters Mast for Lightning Electrode. Installation with base along with hardware, nuts & bolts and all the supporting accessories as per direction of engineer at site. | — | — | — | 53,116 | |
| — | 75.00 | — | — | ||
| Supply erection, testing and commissioning of Maintenance free earthing similar to JEFECOSAFE, pragati electrocon ltd, vijetha earthing etc., with earth electrode of low carbon steel rod of 3 mtrs long and 17.2mm dia with 250Micronsthick copper coating with 2 bags (each 10Kg) of LORESCO back fill compound with all necessary accessories complete according to IS 3043-1987and asper RDSO spec no: RDSO/SPEC/PS/109(rev.0)-2018 amendment '1 | — | — | — | 12,26,550 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
drafttenderschedule.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .