M & R to Dharoi RWSS

Name of work: Repairing of Store Shade and miscelleneous work at

Vadanagar and Kadarpur Store TA.:VADNAGAR & KHERALU,

Estimated Cost :- Rs.

Executive Engineer

Public Health Dharoi Project Division

Gujarat Water Supply & Sewerage Board

Volume-III: Price Bid

VOLUME – III – PRICE BID

2.0 BID FORM (WITH PRICE)

SUMMARY OF - Grand Summary of Schedules (Covering

Schedule – A NIL

Schedule - B Name of work: Repairing of Store Shade and

miscelleneous work at Vadanagar and Kadarpur

Store TA.:VADNAGAR & KHERALU,

Schedule – C Detailed Specification

Volume-III: Price Bid

Name of Work:- Repairing of Store Shade and miscelleneous work at Vadanagar and Kadarpur Store

TA.:VADNAGAR & KHERALU, DIST:MAHESANA.

The bidder shall quote his firm and fixed price for the entire work under this Contract, defined in more

details in various sections of this bid document.

1. The rates and prices shall be submitted in the electronic formats given by n-procure which is called

Schedule-B rates and prices received in any other formats will be rejected and the Bids will be

2. It will be entirely at the discretion of the Employer to accept or reject the bidder’s proposal, without

giving any reasons whatsoever and the bidder shall not be permitted to withdraw his bid on this account.

4. In Schedule-B the Bidder shall quote prices for the items on lump sum / unit rate as called for against the

be considered for price evaluation & shall form a part of the Contract Agreement.

be carried forward to Schedule-B for comparison and evaluation.

7. Wherever for a particular item the quantities have been specified payment shall be on unit rate basis and

unit variation in quantity will be paid with pro rata basis.

8. Each item is to be individually priced online and the amounts shall be added up to arrive at the “Total of

description requires the item to be priced on "as applicable” basis. The item shall not be priced if it is

“not applicable” to the bidder’s design, in which case the bidder shall add the words “NOT

APPLICABLE”. The wording in the item description is for subject matter guidance only; clause

references are indicative only and all other relevant clauses shall also be referred to. The prices shall

allow for all the works covered under the bid and all liabilities and contractual obligations whether

separately specified or not. Items against which no prices are quoted shall not be separately paid for and

the bidder shall be deemed to have covered the cost of execution of such items (according to the

requirements of the bid document) in the prices quoted for other items.

working/safety of the system as specified, will not be separately paid for by the Employer when

executed and shall be deemed to be already covered by other items and rates listed in the price sheets No

extra payment shall be given for any item which is required to complete and perform the project.

Schedule B and shall be firm and fixed, during the pendency of the Contract. In case of any discrepancy

considered for financial evaluation of the bid.

11. Schedule ‘D gives the basis of interim payment for construction of civil works.

12. The bidder shall be deemed to have allowed in his price for provision, maintenance and final removal of

all temporary works of whatsoever nature required for construction including temporary bunds, diverting

water, pumping, de-watering etc. for the proper execution of works. The rates shall also be deemed to

include any works and setting out that may be required to be carried out for laying out of all the works

Volume-III: Price Bid

13. Prices shall be filled online only.

other sections of these bid documents and these documents are to be taken as mutually explanatory of

15. The bidder shall interpret the data furnished and carry out any additional survey work, or investigation

work required at his own cost.

16. The prices quoted shall also include the cost of materials utilized for testing.

17. The bidder should acquaint himself with the site conditions including the access to Work site. The

successful bidder shall have to make suitable access to work sites at his own cost. These accesses will be

used by the other contractors working for GWSSB.

all the equipments / materials / accessories and services required as per the specifications. The bidder

19. 1% of the value of work will be deducted from the Running bill against labour cess which is

20. Third Party Inspection / CSC agency will be deployed by GWSSB and charges of the same will be borne

21. Any expenditure incurred by inspection/ CSC agency for the work misinformed by the contractor and

charges of inspection/ CSC agency without any work due to misinformation shall be recovered from the

24. The rates quoted shall be exclusive of GST, but inclusive of all other taxes, duties which shall not be

paid extra. While GST will be paid for admissible part of actual work done at the approved tender rates

and tender conditions of price variations. GST shall be paid as per prevailing rates at the time of

payment. The TDS shall be deducted at source as per provision of IT rules and GWSSB policy.

25. The rates should be quoted exclusive of GST but inclusive of all other taxes as per Volume-I | (B),

General Conditions of p Contract, Clause No.

26. Payment shall be made for the components for which lump sump prices are quoted, as per the schedule

of payment. Total cost will be worked out on the basis of work done of individual items and rates quoted

against those particular items only.

27. Royalties: The contractor shall be liable to pay the royalty of the quarried materials/ minerals used in the

construction of works at the rates specified in the Narmada Water Resources, Water Supply & Kalpsar

Dept. Resolution No. GEN-2010-595- (6)- M.I.Cell ( K-1) Dt. 29-4-2011 ( Gujarati Version Copy

enclosed) and Notification of industries and mines Department Gandhinagar dated 18 june 2016 and

shall be recovered from the running bills of the work from time to time and remaining amount if any

shall be recovered from the final bill before releasing the security deposit of the work.The contractor

shall furnish the statement showing the quantity of quarried materials / minerals from whom purchased (

with full address of the seller) and copies of the bills for purchase to the Executive Engineer of the in

charge of the work. The contractor shall also furnished such additional information as regards royalty

payment to the competent authority.

Volume-III: Price Bid

28. The claim of contractor regarding GST shall have to be backed by documentary evidence substantiating

the actual payment of tax duly certified by the competent tax authority. The final decision regarding the

quantum of claim amount to be recovered or reimbursed shall be of the competent authority of the

GWSSB and shall be binding on the contractor.

Signature of Contractor Executive Engineer

P.H.Dharoi Project Division

Volume-III: Price Bid

2. BID FORM (WITH PRICE)

Bidders are required to fill up all the blank spaces in this Bid Form.

SUB : Repairing of Store Shade and miscelleneous work at Vadanagar and Kadarpur Store

TA.:VADNAGAR & KHERALU, DIST:MAHESANA.

1. Having visited the site and examined the Bid Documents, Drawings, Conditions of Contract,

Addenda / Amendments to the above, for the execution of the above Contract, we the undersigned

offer to Design, Engineer, Procure, Construct, Complete, Commission, operate, maintain and Run

the whole of the said works for ............. Months from the date of commissioning including defects

liability period as given in Conditions of Contract and in conformity with the drawings, conditions

Documents, including Addenda Nos.____________________ (insert numbers) for Lump sum fixed

Construction including free trial run for three months or such other sum as may be ascertained in

accordance with the conditions.

2. I / We agree that

(a) If we fail to provide required facilities to the Employer’s representative or any other person /

Agency by the Employer to perform on his behalf for carrying out the inspection and testing of

materials and workmanship.

(b) If we incorporate into the Works, materials before they are tested and approved by the

Engineer’s representative

(c) If we fail to deliver pure water of required quantity according to the conditions / stipulations of

the Contract, the Engineer will be at liberty to take any action including termination of Contract

and impose at his absolute discretion any penalties, and / or reject the work.

3. We undertake, if our Bid is accepted, to complete and deliver the works in accordance with the

Contract with in ......... Months, inclusive of monsoons, from the date or receipt of Letter of

Acceptance issued to us by you.

4. We agree to abide by this Bid for a period of 180 days from the last date of submission of bid and it

shall remain binding upon us and may be accepted at any time before the expiry of that period.

5. In the event of our Bid being accepted, we agree to enter into a formal Contract Agreement with you

incorporating the conditions of Contract thereto annexed but until such agreement is prepared this

Bid together with your written acceptance thereof shall constitute a binding Contract between us.

6. We agree, if our Bid is accepted, to furnish performance Security in the forms and of value specified

in the Clause 1 of Volume-IB, General Conditions of Contract.

7. We have independently considered the amounts of liquidated damages shown in Appendix to Bid

and agree that they represent a fair estimate of the damages likely to be suffered by you in the event

of the work not being completed by us in time.

8. We understand that you are not bound to accept the lowest or any bid you may receive.

Volume-III: Price Bid

(Name of the person)

(In the capacity of)

Duly authorized to sign Bid for and on behalf of

(Fill in block capitals)

Volume-III: Price Bid

Name of Work:- Repairing of Store Shade and miscelleneous work at Vadanagar and Kadarpur Store

TA.:VADNAGAR & KHERALU, DIST:MAHESANA.

Schedule showing the approximately the materials to be supplied to the contractor from government stores

for the work to be executed and the rate at which they are to be charged.

Rate at which the

material will be Place of

Particular Qty. charged to the Delivery

------- NIL -------- Store

1. The contractor submitting the Tender shall see that the rate in Schedule-A are filled in by the Engineer in

Charge at the time of issue tender.

2. The contractor while submitting the tender shall provide his own arrangement at his own cost for

loading, unloading, and transporting safety to the site of work the cement stipulated in Schedule-A

3. Binding wire of 15 gauge of thinner gauge required for placing the reinforcement in position shall be

provided at his own cost.

4. All the materials required for the items other than labour in Schedule-A but available with the dept. will

be issued on request to the contractor. (for use in this contract only) at prevailing market rates or

departmental issue rates whichever is higher.

5. All the surplus materials supplied by the deptt. As mentioned in schedule-A should be handed over to the

Department by the contractor at the Govt. stores as directed.

6. The materials mentioned in schedule-A shall have to be checked for their correctness and soundness by

the contractor before taking the delivery of the materials from the Government.

7. Necessary cement will be purchased by the agency at their own cost from open market.

8. The persons of firm submitting the Tender should see that rates in the above schedule are filled up by the

Executive Engineer, on the issue of form prior to the submission of the Tender.

9. Carting of above materials should be done by contractor at his own cost.

10. Contractor should return the balance materials in good and acceptable condition, otherwise recovery at

the double rates will be affected in view of Clause 12A.

Signature of contractor Executive Engineer

P. H. Dharoi Project Division

Volume-III: Price Bid

Name of Work:- Repairing of Store Shade and miscelleneous work at Vadanagar and Kadarpur Store

TA.:VADNAGAR & KHERALU, DIST:MAHESANA.

NAME OF SCHEME :-DHAROI RWSS.

Name of Work:- Repairing of Store Shade and miscelleneous work at Vadanagar and

Kadarpur Store TA.:VADNAGAR & KHERALU, DIST:MAHESANA.

m Qty. DESCRIPTION OF ITEM Unit Rate Amount

1 Dismentaling tiled of stone floors laid in

mortar including stacking of serviceable

728.4200 materilas and disposal of unserviceable Sqm 48.69

materials with all lead and lift. At

Vadnagar & Kadarpur SHW

2 Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc.

stacking of serviceable materilas and

disposal of unserviceable materials with

all lead and lift.(ii) A.C. sheet roofing.

At Vadnagar & Kadarpur SHW

3 Dismentling doors, windows, ventilators

etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and

15.0000 other attachment etc. complete and Each 254.93

stacking them within all lead and lift.(ii)

Exceeding 3 Sq.M. in area. At Vadnagar

4 Removing and scraping of old

deteriorated plaster of any thickness

1706.580 fromm wall / R.C.C member including

0 stacking of serviceable material and

disposal of unserviceable from site of

work with all lead and lift

5 Providing 20mm thick cement plaster in

single coat on single or half brick walls

1998.870 for interior plastering upto floor two

0 level and finished even and smooth in

(iii) Cement mortar 1:6 (1-cement:6-

6 Providing and laying cement concrete

pavement (25mm to 50mm thick) with

1:2:4 (1-cement : 2-coarse sand : 4-

stone aggregate 20mm nominal size)

including finishing with floating coat of

neat cement complete.

Volume-III: Price Bid

7 Providing corrugated JSW/TATA Pre

coated Coated G.I. sheet of class-3

roofing fixed with glavanished iron J or

L Hooks, Bolts and nuts 8mm diameter

with bitumen and G.I. limpet washer or

G.I. limpet washer. filled with white lead

complete excluding the cost of purlins,

Rafters and Trusses.(1) 0.80 mm thick

At Vadnagar & Kadarpr SHW

8 Providing and fixing of Ridge flashing

for roof panel shall be made out of

mm thick pre coated GI sheet . The

Precoated sheet shall be of minimum

240 mpa steel grade confirming to IS

14246:1995 and shall have zinc coating

of minimum 120 gsm as per

IS:277:1992 , 5-7 microns epoxy primer

on both side of the sheet and polyester

61.6000 top coat 15-18 micron. The PPGI Sheet Rmt 515.28

shall have plastic protective guard film

of minimum 25 microns to avoid

scratches during transportation. The

ridge shall be fixed to the steel members

by pop rivet or self drilling/self stitching

fastners @ maximum 450 mm c/c along

length of capping/flashing etc complete

At Vadnagar & Kadarpr SHW

9 Excavation for foundation upto 1.5 m

depth including sorting out and

6.0000 stacking of useful materials and Cum 210.42

disposing off the excavated stuff upto

50 Meter lead.(A) Loose or soft soil

10 Providing and laying cement concrete

1:3:6 (1-Cement : 3- coarse sand : 6-

hand broken stone aggregates

mmnominal size) and curing complete

excluding cost of formwork in (A)

Foundation and Plinth

11 Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

work in (A) Foundations, footings, Base

of columns and Mass concrete

12 Providing and laying controlled cement

concrete M.200 exposed work with

5.5300 curing etc. complete including the cost Cum 12452.80

of formwork but excluding the cost of

reinforcement for R.C.C. work in (B)

Volume-III: Price Bid

COLUMNS:(ii) Having cross-sectional

area more than 0.08 Sq.M and upto

13 Providing and laying controlled cement

concrete M.200 exposed work with

curing etc. complete including the cost

of formwork but excluding the cost of

reinforcement for R.C.C. work in(A)

BEAMS :(i) Having cross-sectional area

Plinth Beam & Top Beam

14 Providing H.Y.S.D. Bar reinforcement

for R.C.C. work including bending,

binding and placing in position

complete upto floor two level

15 Brick work using common burnt clay

building bricks having crushing

strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement

Mortar 1:5 (1- Cement :5 -fine sand) &

Extra for brick work in superstructure

above plinth level upto floor two level

(B) Conventional

16 Providing and fixing rolling shutters of

approved make made of 80 mm wide

M.S. laths inter-locked together through

their entire length and jointed together

at the ends by end locks mounted on

specially designed pipe shaft with

7.5000 bracket plates, guide channels and Sqm 3519.21

arragements for inside and outside

locking with push-pull operation

including the cost of hood cover and

spring etc. complete.(A) Shutters having

width below 3.5 M.At Vadnagar &

17 Providing and fixing rolling shutters of

approved make made of 80 mm wide

M.S. laths inter-locked together through

their entire length and jointed together

at the ends by end locks mounted on

specially designed pipe shaft with

17.5000 bracket plates, guide channels and Sqm 4501.00

arragements for inside and outside

locking with push-pull operation

including the cost of hood cover and

spring etc. complete. (B) Shutters

having width 3.5 M. and above At

Vadnagar & Kadarpr SHW

Volume-III: Price Bid

18 Applying two coats of Birla or Asian

acrylic Lapy (Putty) & two coats of

primer of approved brand and

1998.870 manufacture on new wall surface to

0 give an even shade including

thoroughly brushing the surface free

from mortar dropping & ither foreign

matter & sand prepared smooth.

19 Finishing wall with weather proof

exterior emulsion paint on wall surface

(two coats) to give an required shape

even shade after thoroughly brushing Sqm 73.02

the surface to remove all dirt, and

remains of loose powdered materials.etc

20 Wall painting (two coats) with plastic

emulsion paint of approved brand and

manufacture on undecorated wall

1998.870 surface to give an even shade including

0 throughly brushing the surface free

from mortar droppings and other

foreign matter and sand papered

21 Applying priming coat over new steel

and other metel surface after and

including preparing the surface by

throughly cleaning, oil,grease, dirt and

50.0000 other foreign matter and scoured with Sqm 36.50

brushes fine steel wood, scrapers and

sand paper with ready mixed priming

paint brushing red lead. At Vadnagar &

22 Painting two coats (excluding priming

coat) on new steel and other metal

surface with enamel paint, brushing,

interior to give an even shade including

cleaning the surface an even shade

including cleanicn the surface of all

dirt, dust and other foreign matter.

At Vadnagar & Kadarpr SHW

23 Carring out plinth treatment to post

construction /existing structure by

spraying chemical solution fortermite

control treatment including labour and

material consistment with I.S.I

728.4200 specification. Using Chlordene and Sqm 85.96

Chiorpurfiles 20 EC. As Per 6131_paret-

II Consentration Weight one percent is

recommended i.e one litre 20 EC

chemical emulsion with 19 liter give

% concrentration inclusive of one litre

Volume-III: Price Bid

chemical emulsion appication at the

rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

24 14.2800 Crimp Jali 12 gauge Sqm 266.95

25 207.9936 Iron Angle for stand & frame kg 42.37

26 Extra cost of rivet fixing, hook and

27 20.0000 Labour charges - Bhisti Each 579.00

28 Hiring of Crane including diesel and

24.0000 driver for material shifting Hr 801.56

29 Hiring of tractor with trolley considering

24.0000 8 hrs. as working day including driver Hr 263.01

30 Supplying and erecting LED street light

/ Flood light fittings with High power

White LEDs wattage of 3 Watt and

above assembled on single MCPCB,

efficiency more than 130 lm/w and

corrosion free High pressure die cast

aluminum housing with smooth finish

powder coated and heat sink extruded

aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company

mark/name engraved or embossed

to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80

certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity

between the ranges shown.)

(B) Flood Light (IP-65), Surge protection

-4KV integral and ,Light must have

440VAC line supply with over-voltage

protection. (vi)above 90 to 120 watts

Volume-III: Price Bid

31 Point wiring for Light / Fan/ Bell/

Primary Point with 2-1.5 sq. mm &

earth wire of 1.5 sq. mm (green) both

are of ISI marked 1.1 kv grade FRLS

PVC insulated multi strand copper

wires upto max length of 10 mt, in

below type of pipe erected with 6A

Tissino Type ISI marked flush type

switch / bell push and accessories

erected on Metal / PVC/Wooden Box

covered with 3 mm thick

PC(Polycarbonate) /Acrylic/Laminated

sheet. with necessary Lamp

holder/ceiling rose / H.D.Connector as

(a) with medium class Rigid PVC pipe

and accessories erected flushed on

wall/ceiling complete

32 Point wiring for FAN with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper

wires up to 10 mtr length, in below type

of pipe erected with 6A Modular type

switch and hum free EME step type

electronic fan regulator mounted and

accessories with earth continuity of

following type erected on PVC /

Metallic/Wooden box, single mounting

base frame covered with

textured/metallic/white front plate

modules erected on / in wall / ceiling

as per pipe erected. with necessary

ceiling rose / H.D.Connector as

(a) with medium class Rigid PVC pipe

and accessories erected flushed on

wall/ceiling complete

33 Supply, Installation, Testing and

Commissioning of suitable sweep, BEE

5 Star rated, Ceiling fan with Brush

Less Direct Current (BLDC) permanent

ferrite magnet Motor, class of

insulation: B, Rust free

nos.Aluminium blades, 2 nos. canopies,

shackle kit with earthing provision,

copper winding, Power factor not < 0.9,

Service Value (CMM/W) minimum 6.85,

Air delivery minimum 215 CMM,

RPM,230v (tolerance as per IS : 374-

2019), THD < 10%, with remote unit for

Speed Control and all remaining

Volume-III: Price Bid

accessories including safety pin, nut

bolts, washers, temperature rise =

degree C (Max.), suitable for 140 to

285 Voltage and rectifier circuit with

surge, over current and overload

protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as

required.[ Make shall be approved by

Engineer in Charge] (B) 1200 mm

34 Supplying and erecting 19 / 20 mm.

nominal bore Medium Class M.S. Pipe

8.0000 down rod erected duly painted for fan Mtr 107.00

complete with proper insulation without

leakage and earthing

35 Providing and laying broken chine

mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles

to be laid over cement mortar 1:3 to

plain or slope and to be tempered to

bring mortar creme out upto surface

using white cement including rounding

off junctions and extending them upto

15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

36 Dismentling barbed wire in fencing

including making rolls and also

including dismentling fencing posts

including all earth work concrete in

base and making good the disturbed

ground stacking useful materials as

directed and disposing as directed and

disposing of the unserviceable materials

with all lead and lift. Vadnagar,

37 Providing and fixing 1.20 Metre high

fencing with 2.0 Metre long M.S. Angle

posts 40mm x 40 mm x6 mm and oil

painting 3 coats fixed at 2.5 Mt,C/c.

with five Horizontan lines and two

diagonals of galvanised steel barbed

wire weighting 9.38 Kg. per 100 Metre,

strained and fixed to posts with

G.I,staples including fixing the postsin

ground with 0.5 M x 0.5.M x 0.5 M.

block in C.C1:5:10 etc complete.

Vadnagar, Kadarpur SHW

38 Provinding TMT Bar FE 500D

2620.800 reinforcement for R.C.C work

0 inclunding bending, binding, binding

and placing in position complete upto

Volume-III: Price Bid

floor two level ( upto 10 ton )

39 Providing and laying ordinary cement

concrete 1:2:4 ( 1 cement : 2 coarse

sand : 4 graded stone aggregates

mm nominal size ) and Curing Complete

excluding cost of formwork in (A)

Foundation and Plinth (upto 10 ton)

40 Box cutting the road surface to proper

slope and camber for making a base for

road work including removing the

excavated stuff and depositing on the

road side slope as directed upto

41 Providing and laying cement concrete

1:3:6 (1-Cement : 3- coarse sand : 6-

hand broken stone aggregates 40 mm

nominal size) and curing complete

excluding cost of formwork in (A)

Foundation and Plinth

42 Providing and Casting in situ controlled

Cement Concrete M-200 for R.C.C. Raft

42.0000 and cutt-off walls including necessary Cu.m 4347.30

shuttering laying, vibrating, ramming

and curing complete.

43 Providing and fixing pre-cast Rubber

Dye / steel Dye inter locking concrete

block 60mm thick with grade of

concrete M300 pnumatic compressed /

vibrated mechanically and as per

300.0000 approved design Confirming to IS Sq.m 692.91

15658 : 2006 including 35 mm Sand

layer for levelling and filling the joint

with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc.

44 Pedestrian-Controlled Lawn Mower

1.0000 having Maximum Width of the Cutting No. 7494.00

Blade of 600 mm

45 Aluminium Platform step ladder of total

2.0000 extended height of 20 feet & carring No. 45000.00

Capacity grater then 150 Kg

46 1.0000 Standard Wheel chair Folding No. 8350.00

47 Providing and fixing vitreous china dual

purpose closet suitable for use as

squatting pan or European type water

closet (Anglo Indian W.C pan) with seat

& lid fixed with C.P. brass hinges and

rubber buffers, 10 litre low level

flushing cistern with fitting and

brackets, 40 mm flush bend, 20 mm

Volume-III: Price Bid

over flow pipe, with specials of standard

make and mosquito proof coupling of

approved municipal design complete,

including painting of fittings and

brackets, cutting and making good the

walls and floors wherever required:

17.68.1 White vitreous china dual

purpose WC pan with white solid plastic

seat and lid with white vitreous china

flushing cistern and C.P. flush bend.

48 2.0000 Providing & Fixing Handicap Grab Bar No. 3500.00

49 Providing and fixing washbasin with

single hole for pillar tap with C.I. or

M.S. brackets painted white including

2.0000 sutting holes and making good the No. 1504.46

same but excluding fittings.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm

x v 400mm size. (i) In white colour.

50 Providing laying and jointing in true line

and level 25mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including

fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall

30.0000 with the help of clamp at every two Rmt. 90.93

metre C/C or shall be concealed as

directed including necessary fittings

etc. including testing of pipe and joints

and fixing the same with adhesive

solvent, including cost of all materials.

51 Providing and fixing S.W. gully trap

with C.I. grating brick masonry

chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside)

with standard weight.(i) Square mouth

traps. (A) 100mm x 100mm size P type.

52 Providing and fixing pillar tap, capstan

head, screw down high pressure with

screws, shanks and back nuts. (ii)

53 Health Fauset Heavy duty with hook

54 Door closers (Heavy type of

4.0000 number) Hardwire or Everite Prabhat or No. 466.10

55 P & L 24" x 24" vitrified 8 mm thick tile

flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse

32.0000 sand) on new surface or fixing on Sq.m 1453.19

existing flooring by adhesive material

including dismentaling of existing

flooring and jointed with color cement

Volume-III: Price Bid

slurry including finised with flush

pointing & cleaning the surface etc.

complete for antiskit

I/We am/are willing to carry out the work at ____________________ % (Shoud be written in figures and words)

Above/Below the estimated rate mentioned above amount of my/our tender work out as under

Estimated amount put tender Rs.:-……...…………Estimated amount put to tender Rs……………….

Deputy Executive Engineer

Sign of Contractor P.H. Dharoi Project Sub Division

a) The bill of quantity (without price) shall be incorporated as above.

Volume-III: Price Bid

1. As mentioned in the Conditions of contract, the Contract being a lump sum type turnkey Contract on

EPC basis, the provision of measurement will be applicable only for the assessment of value of work

done for inclusion in any interim certificate for part payment to the Contractor.

2. The Schedule specifies the procedure for all such assessment of the items specified in Schedule B.

3. Each item of Schedule-B has been divided into broad components. The Employer's Representative shall

assess the value of each component as indicated in paragraph 6 herein below.

4. Percentages are indicated against each component of each item specified in Schedule B, based on the

Employer's best appreciation of the value of the component as related to the total costs of the concerned

item as whole. A head titled (any other item(s)) is included in each breakdown of schedule and the

tenderer shall at the time of tendering indicate any additional items which he considers necessary but

cannot be covered by any of the heads indicated in the breakup.

5. The percentage breakup as indicated in the Schedule may differ from that corresponding to the

tenderer’s scheme and design and he should take this into account while quoting his lump sum prices for

the items specified in Schedule-B.

6. The contractor shall, after approval of his detailed designs and drawings furnish to the Employer's

Representative an initial bill of quantities to all major items, to be reviewed and updated periodically

with the Employer's Representative. This bill of quantities will be used for assessment of percentage

progress of the component at any stage. By measurement jointly taken by the Employer's Representative

and the Contractor, mutually agreed and entered in the measurement books in the form and by the

method approved by the Employer's Representative, and signed jointly by both the parties.

Volume-III: Price Bid

BREAK UP FOR INTERIM PAYMENTS

(CIVIL, MECHANICAL, INSTRUMENTATION & ELECTRICALWORKS)

Percentage Payment to be

Item Description of Items

a On receipt of materials at project site 65 % of Quoted rate

b On Excavation,Lowering, laying and Jointing 20 % of Quoted rate

c On Hydraulic testing 5 % of Quoted rate

d On refilling and disposal of surplus stuff 5 % of Quoted rate

e After commissioning 5 % of Quoted rate

a On receipt of materials on site 70 % of Quoted rate

b On erection 20 % of Quoted rate

c On Hydraulic testing 5 % of Quoted rate

d After commissioning 5 % of Quoted rate