Providing Installation Testing and Commissioning of LT Control Panel along with allied electro-mechanical works at WSS Nainsukh Katarmal Loorkote and Dalogra.

Amount

Mechanical Items

Design Fabrication and fitting of LT control panel of 25HP at pumping station Dalogra Dug Well which shall be dust and vermin proof fabricated out of 14/16 SWG CR sheet supported on MS Angle of suitable size and provision for fixing it on the ground with the help of foundation Bolts. The panel should be sturdy enough for vibration free operation and should be equipped with suitable Locking/ Sealing arrangement. The structure should be provided suitable entry and exist holes for incoming and outgoing cables. The panel should be given two coats of anti Rust primer and two coats of enamel paint. It should be equipped with following components/ features:- MCCB :- The panel should be fitted with MCCB 100 Amp 50KA to protect the panel in case of any short circuit. VOLTMETER:-The panel should be fitted with digital voltmeter to show the voltage between phase to phase and between phase to neutral. AMPER METER:-The panel should be fitted with digital Amper Meter C.T operated to show the Amper between each phase .PHASE INDICATER:-The panel should be fitted with phase indicator R/Y/B to indicator the phase. STAR- DELTA STARTER:-The panel should be fitted with fully automatic start delta starter, comprising 2No Contractor for main and delta supply and 1No contractor for star operation, I No timer for change over the supply of motor from star to Delta, 2 No push buttons for stop and start operation of motor. 1 No thermal relay range (180-230 Amp.) fitted with main contractor. All control wiring should be neat and clean with flexible copper cable to complete the star- delta circuit of outgoing supply and wiring should be protected by fuse. THERMAL RELAY:-It is a protective device which should be fitted in the panel to protect the motor from over load and under voltage SINGLE PHASE PREVENTER:-It is also protective Device should be fitted in the panel to protect the motor from single phase and stop the operation of motor in case failure of any phase & made proper phase sequence. Providing and making connection of Cu cable to LT control panel and motor. Testing and Commissioning of control panel by making connecting to incoming terminals and outgoing terminal of control panel. Testing the performance of the panel on no load and on full load. Complete job includes cost of material and labour charges at site of work.

Design Fabrication and fitting of LT control panel of 25HP at pumping station Loorkote Base which shall be dust and vermin proof fabricated out of 14/16 SWG CR sheet supported on MS Angle of suitable size and provision for fixing it on the ground with the help of foundation Bolts. The panel should be sturdy enough for vibration free operation and should be equipped with suitable Locking/ Sealing arrangement. The structure should be provided suitable entry and exist holes for incoming and outgoing cables. The panel should be given two coats of anti Rust primer and two coats of enamel paint. It should be equipped with following components/ features:- MCCB :- The panel should be fitted with MCCB 100 Amp 50KA to protect the panel in case of any short circuit. VOLTMETER:-The panel should be fitted with digital voltmeter to show the voltage between phase to phase and between phase to neutral. AMPER METER:-The panel should be fitted with digital Amper Meter C.T operated to show the Amper between each phase .PHASE INDICATER:-The panel should be fitted with phase indicator R/Y/B to indicator the phase. STAR- DELTA STARTER:-The panel should be fitted with fully automatic start delta starter, comprising 2No Contractor for main and delta supply and 1No contractor for star operation, I No timer for change over the supply of motor from star to Delta, 2 No push buttons for stop and start operation of motor. 1 No thermal relay range (180-230 Amp.) fitted with main contractor. All control wiring should be neat and clean with flexible copper cable to complete the star- delta circuit of outgoing supply and wiring should be protected by fuse. THERMAL RELAY:-It is a protective device which should be fitted in the panel to protect the motor from over load and under voltage SINGLE PHASE PREVENTER:-It is also protective Device should be fitted in the panel to protect the motor from single phase and stop the operation of motor in case failure of any phase & made proper phase sequence. Providing and making connection of Cu cable to LT control panel and motor. Testing and Commissioning of control panel by making connecting to incoming terminals and outgoing terminal of control panel. Testing the performance of the panel on no load and on full load. Complete job includes cost of material and labour charges at site of work.

Design Fabrication and fitting of LT control panel of 50HP at pumping station Katarmal Base which shall be dust and vermin proof fabricated out of 14/16 SWG CR sheet supported on MS Angle of suitable size and provision for fixing it on the ground with the help of foundation Bolts. The panel should be sturdy enough for vibration free operation and should be equipped with suitable Locking/ Sealing arrangement. The structure should be provided suitable entry and exist holes for incoming and outgoing cables. The panel should be given two coats of anti Rust primer and two coats of enamel paint. It should be equipped with following components/ features:- MCCB :- The panel should be fitted with MCCB 200 Amp 150KA to protect the panel in case of any short circuit. VOLTMETER:-The panel should be fitted with digital voltmeter to show the voltage between phase to phase and between phase to neutral. AMPER METER:-The panel should be fitted with digital Amper Meter C.T operated to show the Amper between each phase .PHASE INDICATER:-The panel should be fitted with phase indicator R/Y/B to indicator the phase. STAR- DELTA STARTER:-The panel should be fitted with fully automatic start delta starter, comprising 2No Contractor for main and delta supply and 1No contractor for star operation, I No timer for change over the supply of motor from star to Delta, 2 No push buttons for stop and start operation of motor. 1 No thermal relay range (180-250 Amp.) fitted with main contractor. All control wiring should be neat and clean with flexible copper cable to complete the star- delta circuit of outgoing supply and wiring should be protected by fuse. THERMAL RELAY:-It is a protective device which should be fitted in the panel to protect the motor from over load and under voltage SINGLE PHASE PREVENTER:-It is also protective Device should be fitted in the panel to protect the motor from single phase and stop the operation of motor in case failure of any phase & made proper phase sequence. Providing and making connection of Cu cable to LT control panel and motor. Testing and Commissioning of control panel by making connecting to incoming terminals and outgoing terminal of control panel. Testing the performance of the panel on no load and on full load. Complete job includes cost of material and labour charges. installation, testing and commissioning it on no load followed by on full load at site.Complete job including cost of material and labour charges at site of work.

Design Fabrication and fitting of LT control panel of 40HP at pumping station Nainsukh Dug Well which shall be dust and vermin proof fabricated out of 14/16 SWG CR sheet supported on MS Angle of suitable size and provision for fixing it on the ground with the help of foundation Bolts. The panel should be sturdy enough for vibration free operation and should be equipped with suitable Locking/ Sealing arrangement. The structure should be provided suitable entry and exist holes for incoming and outgoing cables. The panel should be given two coats of anti Rust primer and two coats of enamel paint. It should be equipped with following components/ features:- MCCB :- The panel should be fitted with MCCB 100 Amp 50KA to protect the panel in case of any short circuit. VOLTMETER:-The panel should be fitted with digital voltmeter to show the voltage between phase to phase and between phase to neutral. AMPER METER:-The panel should be fitted with digital Amper Meter C.T operated to show the Amper between each phase .PHASE INDICATER:-The panel should be fitted with phase indicator R/Y/B to indicator the phase. STAR- DELTA STARTER:-The panel should be fitted with fully automatic start delta starter, comprising 2No Contractor for main and delta supply and 1No contractor for star operation, I No timer for change over the supply of motor from star to Delta, 2 No push buttons for stop and start operation of motor. 1 No thermal relay range (180-230 Amp.) fitted with main contractor. All control wiring should be neat and clean with flexible copper cable to complete the star- delta circuit of outgoing supply and wiring should be protected by fuse. THERMAL RELAY:-It is a protective device which should be fitted in the panel to protect the motor from over load and under voltage SINGLE PHASE PREVENTER:-It is also protective Device should be fitted in the panel to protect the motor from single phase and stop the operation of motor in case failure of any phase & made proper phase sequence. Providing and making connection of Cu cable to LT control panel and motor. Testing and Commissioning of control panel by making connecting to incoming terminals and outgoing terminal of control panel. Testing the performance of the panel on no load and on full load. Complete job includes cost of material and labour charges. installation, testing and commissioning it on no load followed by on full load at site.Complete job including cost of material and labour charges at site of work.

SAI ENGINEERS

G K ELECTRICAL ENGINEERING WORKS

A K ELECTRICAL

NACHIKETA TECHNOLOGY