Strengthening of Street lights pole in Rajat Vihar Sec-62, Noida

CAPABILITY STATEMENT

*It is compasury for the bidder to fill this statement and the bidder must upload only those documents that support this statement.

Reference No- 21 /GM/AO/Sr. Manager.(E&M)-II/2025-26/ET

Tender- Strengthening of Street lights pole in Rajat Vihar Sec-62, Noida.

Name of Tenderer

TOTAL NIT COST OF PROJECT (In Rs.)

S. NO. ELIGIBILITY CRITERIA (Value To Be Filled By the Tenderer In Indian Rs.) Status FINAL STATUS

1 SOLVENCY (Issued within a period of minimum six months). 40% OF TOTAL ESTIMATED COST NOT QUALIFIED NOT QUALIFIED

2 EXPERIENCE (WITH GOVERNMENT/SEMI- GOVERNEMTN/ PSUs ONLY) completed works during the last 7 years ending last day of the month previous to the one in which applications are invited Three similar completed works each costing not less than the amount equal to 40% of estimated cost put to tender NOT QUALIFIED

Two similar completed works each costing not less than the amount equal to 60% of estimated cost put to tender NOT QUALIFIED NOT QUALIFIED

One similar completed works costing not less than the amount equal to 80% of estimated cost put to tender NOT QUALIFIED NOT QUALIFIED

3 RESULT OF EXPERIENCE

TURNOVER (During the immediate LAST 3 consecutive financial years) along with Affidavite. YEAR1

Average annual financial turnover on construction works should be atleast 30% of the estimate cost during the immediate Last 3 consecutive financial years.

4 Required technical Staff (The bidder must submit the supporting documents as per prequalification on Stamp Paper with Notary)

5 Required Machinary (The bidder must submit the supporting documents as per prequalification on Stamp Paper with Notary)

6 Character certificate of Indivisual/ partners/ directors issued by District Megistrate/SDM (For Delhi and Other Area Where SDM issues such Character Certificate)

7 Affidavit of not blacklisted.

8 Address Proof/Id. Proof of indivisual/ partners/ directors.

9 PAN, CARD AADHAR CARD

10 Licence (A) Class approved issued by the director electrical safety to U.P. Govt.

12 Copy of GST Registration.

13 Power of attorney in case of the firm.

14 Copy of partnership deed in case of the firm.

15 lxk&lEcU/kh 'kiFk i= :0 100-00 ds LVkEi ij

16 Lo ?kks"k.kk 'kiFk i= :0 100-00 ds LVkEi ij

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Senior Manager (E&M)-II

Name of Work:-Strengthening of Street lights pole in Rajat Vihar Sec-62, Noida.

Contract No: - 21 /GM/AO/Sr. Manager.(E&M)-II/2025-26/ET

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Supply, Installation, Testing & Commissioning of Standrad 4 Mtr(Above Ground) hot dip galvanized(Granding of Galvanisation average 70 micron or better as per IS2629(AOR) Make:- Bajaj/ GE/Philips/Valmont/Transrail BI01010001010000000000000515BI0100001124 280 Nos Excess(+) Full Conversion INR

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection. UPPWD-2018, PS-1455 CAT-AAA Make:-Bajaj/Philips/Crompton/Surya/LT Light/Havells BI01010001010000000000000515BI0100001125 6 Nos. Excess(+) Full Conversion INR

3 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. E/I. UPPWD-2018 PS No. 1423 Catt-AAA Make:-Bajaj/Philips/Crompton/Surya/LT Light/Havells BI01010001010000000000000515BI0100001126 Nos Excess(+) Full Conversion INR

Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&Pcomplete in all respect as per direction of E/I. UPPWD-2018, PS-647 Make:- Bajaj/ GE/Philips/Valmont/Transrail BI01010001010000000000000515BI0100001127 10 Nos. Excess(+) Full Conversion INR

5 Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20 mm) of specifiedsize and shape including form work, plastering if required, curing etc. as required. (volume of pole/ pipe not to be deducted) DSR-2018, 11.5 BI01010001010000000000000515BI0100001128 28.5 Cum Excess(+) Full Conversion INR

Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 &having no circumferential weld, with accessories forhigh mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor platesetccomplete in all respect as per direction of E/I. UPPWD-2018, PS-651Make:- Bajaj/ GE/Philips/Valmont/Transrail BI01010001010000000000000515BI0100001129 1 Nos. Excess(+) Full Conversion INR

7 Supply and burying of 600 mm x 600 mm x 6.0 mm GI plate, vertically for eathing with its top at least 3 meters below ground level complete with 20 mm dia. GI Pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 12 mm. dia. GI Pipe up to switch board (from appron to switch board the cost of GI pipe and GI wire will be extra) 30 cm. square GI Frame with hinged cover, masonry housing, alternate layers of charcoal/coke and salt at least 150 mm. thick alround etc. as per direction of Engineer-in-charge complete in all respects (This will apply for earthing of poles also). UPPWD-2018, PS-702 BI01010001010000000000000515BI0100001130 18 Nos. Excess(+) Full Conversion INR

S/L of 25x3 mm. G.I. Strip from earth electrode directly in the ground as required complete in all respects (P.S. No. 716) BI01010001010000000000000515BI0100001131 100 Mtrs. Excess(+) Full Conversion INR

9 S/L of Al. armoured cable PVC insulated Ar. served & sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I.Complete in all respects . The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PS No. 501) UPSR -2018 Make : Gloster/Universal/ Polycab/ Havells/ Diacab/Grandley/KEI a)- 10 sq. mm 2 core BI01010001010000000000000515BI0100001132 4800 Mtr Excess(+) Full Conversion INR

a)- 16 sq. mm 4 core BI01010001010000000000000515BI0100001133 2200 Mtr Excess(+) Full Conversion INR

b)- 16 sq. mm 2 core BI01010001010000000000000515BI0100001134 600 Mtr Excess(+) Full Conversion INR

c) 50 Sq.mm. 3.5 Core BI01010001010000000000000515BI0100001135 Mtr Excess(+) Full Conversion INR

10 S/F of Plain or Pin type copper tin plated cable socket (Lug) to the cable lead, insulating with tape and making connector etc. Complete in all respects as per Direction of E/I (PS No. 504) UPSR-2018 a)-16 sq. mm BI01010001010000000000000515BI0100001136 800 Nos. Excess(+) Full Conversion INR

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. DSR-18 (Elect.) Item No-14.16 Make-creator poly extrusion/duraline/rex/times/ narander plast/pioneer -a)-63 mm dia (OD-63 mm & ID-51 mm nominal) DSR-18 (Elect.) Item No-14.16.1 BI01010001010000000000000515BI0100001137 4200 Mtr Excess(+) Full Conversion INR

b)-90 mm dia (OD-90 mm & ID-76 mm nominal) DSR-18 (Elect.) Item No-14.16.2 BI01010001010000000000000515BI0100001139 48 Mtr Excess(+) Full Conversion INR

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. DSR-2018 12.34 BI01010001010000000000000515BI0100001140 10 Nos Excess(+) Full Conversion INR

Demolishing R.C.C. Work Manually by mechnical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of E/I. (AOR) BI01010001010000000000000515BI0100001141 65 cum Excess(+) Full Conversion INR

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.(DSR-2018, 12.42) BI01010001010000000000000515BI0100001142 280 Nos. Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information