SPL REPAIR TO LAUNDRY ROOMS, BOX ROOM AND GC ORDERLIES ROOMS FOR TRG BNs AT IMA DEHRADUN

Amount

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed.

Taking down only chowkhats or frame area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified & directed

M&L for 2nd class hard wood, plain straight chowkats & frame wrought rounded or chamfered put together with glue pinned at joints and fixed complete all as specified and directed.

M&L for Mild steel works as in bands, straps, hold fast, wind ties, angle cleats and similar small articles etc conforming to Fe-290 Gde E-165 complete all specified and directed.

S&F 35mm thick Ist class H.W. (Teak wood) plain framed panelled shutters (any number of panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed

S&F 35mm thick Ist class H.W. (Teak wood) glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc(with sash bars) divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

S&F Steel ventilator factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded as per drg No TD 158 1/2 to 2/2 complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, galvanized wire of staples complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto 3rd storey with necessary scaffolding), complete all as specified and directed.

S& F Factory made 30 mm thick single extruded WPC (Wood Polymer Composite) solid Moulded Flush Door Shutter with solvent based colour of required size with 2.4 or 6 rised panel design on front side with 10mm deep mould on single side with grain texture of comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window& other frames/ chowkhats of size 75 x 50mm comprising of virginPVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheathusk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headedSS screwshaving minimum frame density of 750 kg/cun, screwwithdrawn strength of 2200N (face)&1100N (edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with and including MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete all as per direction of Engineer-In-Charge.

S&F Butt hinges, 100mm long of stainless steel complete all as specified and directed.

S&F 150mm long stainless steel handle complete all as specified and directed.

S&F 200mm long stainless steel barrel tower bolt complete all as specified and directed.

S&F 250mm long stainless steel sliding door bolt with hasp staple (bolt type) and fixing clips etc complete all as specified and directed.

S&F 18mm thick colour prelaminated WPC board , minimum density 600 kg/cum, fixed to timber frame work as in drawers, bath cabinet, cup board, show case, shelves, pelmet box and similar items including taking down damaged boards/ plywood complete all as specified and directed.

S&F in repair 12mm thick white colour prelaminated WPC board , minimum density 600 kg/cum, fixed to bottom in drawers or any other similar work, complete all as specified and directed.

S & F in repairs stain less steel heavy duty steel telesopic channel of 450mm to 500mm size , fixed to drawer including necessary repair complete all as specified and directed.

S&F Edge beading tape 0.50mm thick for exposed edges of WPC boards or similar works, complete all as specified and directed.

S&F in repairs Continuous (Piano) hinges, mild steel, bright finished or electro galvanised, width of flap 30mm (when open), complete all as specified and directed.

S&F in repairs stainless steel bow handle 100mm size with machine screw fixed in cup boards, drawers etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar(1:6) including demolition of old brick work/stone masonry built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius built in cement mortar (1:4) including demolition of old brick work/stone masonry built in cement mortar complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (WPC will be measured and paid separately)

Supply only liquid water proofing compound complete all as specified & directed

M & L for Machine cut kota stone slab flooring 18-20mm thick laid over 20mm thick screed bed in cement mortar 1:6 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing including dismantling of existing tiling and cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M & L for Kota stone slab 10-12 mm thick in riser of steps, skirting, dado and pillar fixed over and including backing coat of 10 mm thick in cement mortar 1:4 for backing and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, including dismantling of existing tiling and cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for granite stone of any colour (of any type) 18- 20mm thick machine cut (table rubbed & polished), as in floors, cooking platforms , skirting and like bedded with and including 15 mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry, and pointed with white with admixture of pigment to match with shade of granite stone including dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 300 mm x 450mm x 6 to 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match fixed over and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tileslaid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 , type B-0 ( using 12.5mm graded crussed stone aggregate) as levelling course in sub floors below tile etc complete all as specified and directed.

S&F 15mm bore medium grade steel water tubing, galvanized with and including all fittings and jointed, tested and fixed complete to wall and ceiling or laid in floors etc including taking up or down existing steel tubing complete all as specified and directed.

S&F 20mm bore medium grade steel water tubing, galvanized with and including all fittings and jointed, tested and fixed complete to wall and ceiling or laid in floors etc including taking up or down existing steel tubing complete all as specified and directed.

S&F in repair Chromium plated Angle valve 15mm dia (angle cock) cast complete all as specified and directed.

S&F in repair Chromium plated brass hot & cold basin mixer with centre hole for WHB and long shank fancy type 15mm bore complete all as specified and directed.

S&F in repair Chromium plated Wall Mixer with Bend Pipe for connection to Overhead Shower (with Bush & Piston Diverter Fitting) with Aerator, connecting legs & wall flange etc 15mm bore complete all as specified and directed.

S&F in repair, PVC connections 15mm size with brass/ PVC nut both side of length 450mm complete all as specified and directed.

S&F in repair PVC connections 15mm size with brass/ PVC nut both side of length 600mm complete all as specified and directed.

S&F in repair, 15mm bore short body bib tap chromium plated with wall flange and aerator complete all as specified and directed.

S&F in repair, Overhead shower round shape 100mm dia single flow (ABS body chrome plated with grey face plate) with revolving joints (with body rotation) & 115 mm long shower arm complete all as specified and directed.

S&F in repairs Chromium plated towel rail 600mm long complete all as specified and directed.

S&F in repairs Chromium Plated steel soap dish complete all as specified and directed.

S&F in repair Vitreous chinawash hand basin Star white oval type counter top of size 63 x 50 cm complete all as specified and directed.

S&F in repair, Chromium plated waste coupling with fly nuts 32mm dia suitable for wash hand basin complete all as specified and directed.

S&F in repair PVC waste pipe 32 MM dia suitable for wash hand basin complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern), white including plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe complete all as specified and directed.

S&F in repair CP Health Faucet with 1 M. long flexible tube chrome braided with wall hook complete all as specified and directed.

S&F in repair 100mm dia chromium plated grating with/without hole complete all as specified and directed.

Demolition of reinforced cement concrete of any discription and any position( ground to 4th floors) and removing the rubbish from the work site out side defence premises complete all as specified and directed.

M&L for RCC 1:2:4 (nominal mix) type B-1, using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete, complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L for complete removing of existing treatment from wall / ceilling including necessay scaffolding etc all as specified and directed. Note : Work will be carried out upto triple storied buildings.

M&L for preparation of plastered or scrapped surface of wall / ceiling and applying 1.5mm thick damp proof wall care putty in two coats, as per manufacturer instruction complete all as specified and directed.

M&L for preparation of puttyied surfaces of wall/ceiling and applying two coats of oil emulsion distemper over one coat of primer, complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces over 10 cm width or girth including rubbing with sand paper of different sizes, filler coat, including filling thinner with fine cloth and spirit lak dana polishing two or more coats up to desired finishing complete all as specified and directed.

M&L for preparation of old treated wooden surfaces over 10 cm width or girth including rubbing with sand paper of different sizes including filling thinner with fine cloth to prepare surface and applying one or more coats of french polishing up to desired finishing complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F stainless steel curtain rod 20mm inner dia of SS heavy duty conduit pipe grade -302 including taking down of existing rod, complete all as specified and directed.

S&F stainless steel decorative finials and end wall bracket of approved quality suitable for 20mm dia curtain rod including taking down of existing finals or end brackets, complete all as specified and directed.

S&F stainless steel heady duty supporting brackets of approved quality suitable for 20mm dia curtain rod, including taking down of existing brackets, make good surfaces of wall after fixing, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

One light/fan point controlled by one, one way switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No.69 above but with stranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 4 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

S&F modular switch 1 way 10A, 1 Module complete all as specified and directed.

S&F modular switch 1 way 20A, 1 Module with indicator lamp complete all as specified and directed.

S&F modular socket 10A, 2/3 pin combined 2 Module complete all as specified and directed.

S&F modular socket 10A/20A, 2/3 pin combined 2 Module complete all as specified and directed.

S&F modular fan regulators step type 2 module 120W complete all as specified and directed.

S&F ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as specified and directed.

S&F in replacement LED tube light batten fitting 20/22 Watt made of aluminium housing suitable for fixing on walls/ceiling, warm/natural/cool white as per requirement at site complete all as specified and directed.

S&F in replacement LED tube light batten fitting 10/12 Watt made of aluminium housing suitable for fixing on walls/ceoling including connections, warm/ natural/ cool white as per requirement at site complete all as specified and directed

M&L for sub main wiring with 2 x4 Sqmm PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in existing Concealed conduit including one run 4 sqmm PVC insulated unsheathed cable with multi stranded copper conductor as a earth continuity and connected upto DB including taking down old unserviceable wiring complete all as specified and directed. Note:Two run of single core PVC cable and one run of earth conductor shall be measured as one RM unit length.

Amit Engineering (BID ID -3502591)

sath sahib associates (BID ID -3503724)

M/s Dev Enterprises (BID ID -3507738)

M R Taders (BID ID -3503800)