Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.7 LAccepted-AOC 45 PIR BABA TARUSHAW ROAD HALWARA AD LUDHIANA 141106 | HALWARA | LUDHIANA | PUNJAB | 141106 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹39.9 L+₹1.5 L (4.02%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹41.0 L+₹2.7 L (6.95%)Rejected-Finance RAJKOT ROAD AIR FORCE STATION HALWARA 141106 PUNJAB | HALWARA | LUDHIANA | PUNJAB | 141106 | L3 | Rejected-Finance Other than lowest |
Tender Value
₹41.5 L
EMD Value
₹83,000
Closing Date
4 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Halwara
GE (AF) Halwara
PROVN OF CERTAIN SANCTIONED WORKS AT AF STN HALWARA
2022_MES_522321_1
GE/HAL-22/2022-23
Open Tender
Civil Works
Item Rate
183 days
GE (AF) Halwara
MES ENLISTED CONTRACTORS CLASS D CATEGORY a i and b i
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Halwara
₹83,000
Yes
17 Jun 2022
6 May 2022
6 Jun 2022
6 May 2022
4 Jun 2022
21 May 2022
60 days
Amount
Taking down chowkhat or frame with shutters (without taking off shutter from frame) exc 1.5 Sqm and but n. exc 4.00 sqm each complete all as specified and directed.
All as per Sl item No 1 above but size n.exc 1.5 sqm each.
Taking down or up 15mm bore steel tubing and connections inculding cleaning for refixing or removal to store complete all as specified and directed.
All as per Sl item No 3 above but 20mm bore
Taking down shutters of any description exceeding 1.00 sqm but n.exc 2 sqm each.
Dismantling cast iron or reinforced concrete drain pipes of any size/dia, jointed in cement motar and taking out from floors or walls complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specficially provided for complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolition of brick built in cement mortar including all quoins arches pillars etc complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed
Resecuring or easing and adjustment after taking down the shutters and refixing in same opening of any description exc 1 Sq.m but n.exc 2 Sq.m each complete all as specified and directed
Demolition for cement concrete of sunken floors exc 15cm thickness complete all as specified and directed
M&L for 25mm thick cement concrete type B-0 using 12.5mm graded crushed stone aggregate as in sub base finished even and fair surfaces without using extra cement complete all as specified and directed.
M&L for Non skid jointless cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in neat cement slurry and pointed in white or coloured cement with pigment to match over and including15mm thick screed bed in CM 1:6 complete all as specified and directed.
All as per Sl item No 15 above but as in skirting over and including rendering 10mm thick in cement mortar 1:4.
M&L for glazed ceramic coloured/ printed tiles 450mm x 300mm x 6 to 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.
M&Lfor Vitrified ceramic light shade coloured tiles 10 mm thick (Square/rectangular) area of each tile n.exc 0.36 Sqm in neat cement slurry and pointed in white or coloured cement with pigment including 15mm thick bedding layer in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.
All as per Sl item No 18 above but as in skirting over and including rendering 10mm thick in cement mortar 1:4.
M&L for 20mm thick granite (table rubbed and polished) as in cooking plateform and like in cement mortar 1:4 including pointing in white cement(1:2) with pigment to match the granite colour complete all as specified and directed.
Rounding to one edges of stone slabs such as in steps, cooking platform and other similar situation complete all as specified and directed.
M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded stone aggregate) as mass filling in sunken floors finished fair and even without using extra cement complete all as specified and directed.
M&L for applying two coats of SHALIMAR SUPERCRETE/NITOBOND water proofing coating on the entire surface of sunken portion complete all as specified and directed.
M&L for 15mm thick cement screed in CM 1:3 admixed with integrd water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of complete all as specified.
M&L for PCC (1:2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of sunken floor complete all as specified and directed.
S&F 32mm dia G I pipe 450mm long beveled cut at both ends by making hole in walls sunken portion approx above the RCC slab and ceiling finished the hole with cement mortar 1:2 to match with existing surfaces complete all as specified and directed.
Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement 1:2:4 type B1 as required area not exc 150 sqcm complete all as specified and directed..
M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required, including cranking bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.
M&L for repair to RCC structure using polymer modified all as per manufactures instruction, as desribed below and as specified and directed. (a) chipping off existing loose and damaged/ cracked concrete/ plaster surface at locations decided by engineer-in-charge to depth upto and beyond reinforcement bars 4 to 8mm using pneumatic tools or with light chiselling & wire brush, descale the exposed surface of reinforcement with wire brushes removing all loose rust scales from rebars blowing all loose dust with blower and washing concrete sirfaces. A coat of alkali rust converting primer to be applied on the reinforced bar surfaces. (b) Welding additional reinforcement bars where dia of existing bar is found reduced than specified limit as directed. (c) Applying one coat of anti corrosive protective coating to be applied on both old and new reinforced bars surfaces as per manufacturers instruction. (d) Appplying one coat of epoxy resin concrete bonding agent to exposed concrete surfaced and reinforcement. (e) Providing polymer modified cement mortar in specified composition for making good lost surface of concrete all as per menufacturer instruction (thickness varies from 25mm to 40 mm) and making surface even and smooth to match with adjacent surface. Note: (i) Before carryout any repair the slab chajja, beam and column to be properly propped and supported using steel props and cost of this deemed to be includeded in quoted rates. (ii) New reinforcement bars will be measured and paid seperately (iii) Where thickness is more than 30 mm polymer modified concrete use smaller size of aggregate as per manufacture instruction to be provided
S&F 15mm bore tube 'medium grade' galavanised with all fitting and fixed complete to walls and ceiling etc complete all as specified and directed.
All as per Sl item No 30 above but 20mm bore
S&F in repairs stop valves 20mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc complete all as specified and directed.
S&F in replacement double layer wall construction rotational moulded water storage tank (ISI Marked) 1000 ltrs capacity (cylinderical vertical with closed top ) hoisted and fixed in position with 20mm dia PTMT float valve complete all as specified and directed..
All as per Sl item No 33 above but 500 ltrs capacity.
S & F in repairs fancy type MS health faucets CP with 1.0mtr long connection pipe for 15mm bore dia complete all as specified and directed.
M&L 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement CP grating including jointing to waste pipe with joint and embedded in cement concrete (1:2:4) type B-1 using graded stone aggregate complete all as specified and directed by Engineer-in-Charge.
S&F 550x400mm Wash Hand Basin vitreous white chinaware including CI/MS brackets fixed in repairs complete all as specified and directed.
S&F 32mm waste fittings, brass, chromium plated for glazed ware sinks,basin etc with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repairs viterous china ware wash down water closet pan (Pedestal Pattern) white and plastic seat and cover with MS CP hinges including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete all as specified and directed
S&F in repairs PVC low level flushing cistern white colour 10 Litres capacity, valve less, with inlet, ball valve, float and handle including brackets, PVC flush bend pipe complete all as specified and directed.
S & F in repairs 15mm dia PVC connection 450mm long with two nuts and washers at each end complete all as specified.
S & F in repairs PVC cabinet mirror 350mm x 450 mm with 4mm thick frame mirror colour white as per sample kept in GE office complete all as specified and directed.
S&F in repair CP brass shower rose 125mm size with or without swivel joints 125 mm size including fixing to steel pipe or union complete all as specified and directed
S&F in repairs 15mm dia bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs chromium plated fancy bib taps brass 15mm dia cast copper alloy with crutch or butter fly handle etc. complete all as specified and directed
S&F in repairs 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule complete all as specified and directed
S&F in repairs Aluminium anodised tubular towel rail 20mm dia D-type, 600mm long between flange complete all as specified and directed.
S&F in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory, with plug, waste pipe, washers incl. cantiliver cast iron brackets, connecting union etc overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm each pane complete all as specified and directed
S&F 4mm thick figured glass pin head type glazed with oil putty in squre n.exc 0.5 Sqm in each pane complete all as specified and directed.
S&F pressed steel frames of size 125x60mm for doors made out of PBC sheet 1.25mm thick with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed
S&F Factory made single extruded WPC (wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-90 (Suspension Grade), Calcium carbonate and natural fibers (wood powder /rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full boky threaded star headed SS screws having minium frames density of 750 Kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edgn minimum compressive strength of 58 N/mm, mokules of elasticity 900 N/mm and resistance to spread of flame of class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required MS hold fast / lugs/ SS dash fasteners of required dia and length complete as per diredtion of Engineer-in-charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i,e, depth and width of profile shall be acceptable. Variation in profile dimesnsions on plus side shall be acceptable but no extra payment on this account shall be made.
M&L for providing cement concrete type C-0 1:3:6 (12.5 mm graded agg) as filling in hollow portion of pressed steel chowkhats complete all as specified and directed.
S&F Factory made single extruded WPC (wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-90 (Suspension Grade), Calcium carbonate and natural fibers (wood powder /rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full boky threaded star headed SS screws having minium frames density of 750 Kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edgn minimum compressive strength of 58 N/mm, mokules of elasticity 900 N/mm and resistance to spread of flame of class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required MS hold fast / lugs/ SS dash fasteners of required dia and length complete as per diredtion of Engineer-in-charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i,e, depth and width of profile shall be acceptable. Variation in profile dimesnsions on plus side shall be acceptable but no extra payment on this account shall be made. For cupboard
S&F factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm with single side prelam Pvc sheet and edges painted to match the prelam sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and directed.
S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having both side Prelam PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed
S&F 35mm thick 2nd class hard wood Plain framed panelled shutter (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces complete all as specified and directed. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated .
S&F Glazed and skeleton shutters 35mm thick 2nd class hardwood. open rebated and prepared to receive (glass) gauze (without sash bars) edges of framing plain chamfered or rounted fitted with cut and mitred beads for securing gauze (glass) etc size of members of shutters as specified complete all as specified and directed
S & F in repair 18/19 mm thick block boards grade 1 quality exterior grade commercial type, fixed with screws to timber framework complete all as specified and directed
S & F in repair steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm single rebated comprises gauged skeleton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one verticle mulion of ERW box type T-section of size 60mmx25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for Each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window. (b) Handle of z section 20mmx25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: wire mesh and painting shall be measured & paid separately under respective items of BOQ..
All as per Sl item No 62 above but comprises glazed shutters
S&F steel ventilators fixed type with glazing bar complete all as specified and directed
S&F PVC cabinet in required sizes at site made out of 18 mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18 mm thick PVC sheet & provision of shutters made out of 18mm thick one side deciorative laminated PVC sheet all requered (5.5 screws etc the panels shall be fabricated using adhesive and screws where ever required . all edges shall be covered with 2mm thick edge bonding tape or 90 degree edge band finished inclding catchers shutters fixed with 75mm size stainless steel butt hings in each pane, stainless steel handle 125 mm long including taking down existing wooden / block board cabinet complete all as specified and directed
S&F PVC Cabinet in required sizes at site made out of 18 mm thick consisting of carcass 18 mm thick PVC sheet & all requered (5.5 screws etc the panels shall be fabricated using adhesive and screws where ever required . all edges shall be covered with 2mm thick edge bonding tape or 90 degree edge band finished existing wooden / block board cabinet complete all as specified and directed
S&F framed work such as in grills ends of bars welded to frame quarol bars and similar work all as specified.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed .
All as per Sl item No 68 above but fixed in repairs
S&F 100mm long Butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed
All as per Sl item No 70 above but 75mm long
S&F200mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
All as per Sl item No 72 above but fixed in repairs
S&F 150mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm long Aluminium handles cast type anodised and fixed complete all as specified and directed.
All as per Sl item No 75 above but fixed in repairs
S&F 125mm long Aluminium handles cast type anodised and fixed complete all as specified and directed.
S&F 300mm ordinary rat rail rod pattern spring including roller plate complete fixing mild steel spring complete all as specified and directed.
S &F in repairs stainless steel hollow curtain rod 19/20 mm dia not exceeding 1.80m long in each with two Nos decorative type brackets knobs/corner piece where required for each rod including fixing with suitable arrangements including taking down existing complete all as specified and directed.
S & F 300mm long alumunium alloy sliding door bolt with hasp & staple and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and directed..
M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide complete all as specified and directed..
S&F 150mm long floor doors stoppers of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks straight or curved in plane exc 6cm mean radius built in cement mortar 1:6 complete all as specified and directed..
M&L 5mm thick plastering in cement mortar 1:3 ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for 12mm thick plaster in cement mortar (1:6) finished the surface even and smooth without using extra cement complete all as specified and directed.
M & L for rendering 15mm thick on external surfaces of brick or concrete wall surfaces in cement motar 1:4 mixed with water proofing compound at the rate of 3% by weight of cement and surfaces finished fair and even without using extra cement all as secified and directe. Note:- WPC shall be mesarued and paid under relevant items.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparation of new plastered surface of walls and applying two coats cement base paints complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of distemper oil emulsion over one coat of primer and including filling the undulated surface/holes of walls with birla putty for smoothening of surfaces complete all as specified and directed.
M&L for complete removal of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy smooth and regular surface using sand paper and applying two coat of cement based paint on external surface complete all as specified.
M&L for preparation of new plastered surface of wall and applying two coat of distemper oil emulsion white or printed over a coat of primer complete all as specified and directed..
M&L for preparation of old decorated surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying one coats of white (lime) wash complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge
M&L for Pre-cast cement concrete 1:2:4 type B-1 ( using 20mm graded stone aggregate) as in manhole covers/cover slabs/shelves and similar articles etc set in cement 1:4 complete all as specified and directed..
Dismantling brick tiles or terracing tiles sinlge layer on roofs complete all as specified and directed.
M&L for wire brushing neat cement slurry with 3kg of cement per sqm at top and bottom of base coat and cleaning top surface all as specified
M & L for 50mm thick (average thickness) PCC 1:2:4 type B-1(using 20mm graded aggregate) as in roof padding to maintain slope complete all as specified and directed.
M&L for 10mm thick plaster in cement mortar 1:4 mixed with WPC over cleaned concrete surfaces (WPCshall be measured and paid separately) complete all as specified and directed.
Supply only integral waterproofing compound .
M&L for mineral faced APP Polymeric water proofing tratment to roof, at any height using membrane minimum 3mm thick and weighting not less than 3.6 Kg per sqm, black finish reinforced with non-woven polyster matt weighting not less than 150 gms per sqm with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 ltr per sqm, torching ovarlaps with a propane or butane gas torch with a overlap of 100mm at the side on transverse direction and 150mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 kg per sqm below APP complete all as specified and as directed. Notes : (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee (on account of any defect raised/noticed during a period of ten years) and shall be released after 10 years of completeion of work. However contractor may deposit the FDR of same amount in favour of GE. If contractor fails to rectify the defect pointed out during this period, the defect shall be got rectified at contractors risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractors quoted rates for this item shall be deemed to be inclusive of this aspect.
M&L for prepration of roof top surfaces, providing and applying single component elastic cold applied polyurethene modified acrylic roofing system, co elastic technology (CET) based on modified polyurethene and fully fibre reinforced, having un Reflectivity index (SR) of 106 on tiop of concrete roof surfaces. Applying three coats including one coat of primer of shali Urethne BTD/Sikalastic 560/smart care damp proof ultra having coverage @ min 0.75kg/m2 and dilution upto 10% and laying reinforced fibre net and applying two coats of shaliurethene BTD/Sikalastic 560/ smart care damp proof ultra @ total consumption 2 kg/m2 in two coats of maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%. The meterials shall be applied with brush or roller, complete in all respect as per the direction of Eingineer-in-Charege/Consultant (Note : 6 hrs interval between two coat will be maintain ). All ayxukart and accessories involved during application should be suupplied by single manufacturer as a part of system. Make STP/Sikka/Asian Paint or equvalent as approved by GE. (i) The water proofing treatment shall be got carried out byt he manufacturer or their authorised applicators duly approved by GE writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However, contractor may deposit the FDR of same amount in favour of GE, if contractor fail to rectify the defect pointed out during out during this period in wiriting, the defect shall be got rectified as contractor risk adn cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.
M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, rubbr finish set, jointed and pointed in with grey cement and no pigment over and including screed bed or bedding layer of mortar 15mm thick for laying floor finished in cement mortar 1:6 complete all as specified and directed.
S&F 110mm bore PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
All as per Sl item No 105 above but 75mm bore
S & F PVC (SWR) bends 110 mm bore
S & F PVC (SWR) bends 75 mm bore
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal
S&F100 mm PVC sanitary connection -short connections upto 300mm complete all as specified and directed.
S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts etc complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in bed plates, coping, kerbs, water trough and like incl. rounded or chamfered on edges complete all as specified and directed..
S&F is repair vitreous china squating pan "Orissa" pattern size 580 x 40 mm white with integral foot rest including connection to trap and to flushing pipe, antyi syholic pipe etc, complete including making good to floor complete all as specified and directed..
M & L for machine cut kota stone slab 18 to 20 mm thick as in flooring / stair case landing, laid over & including 15mm thick cement screeding in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.
M & L for machine cut kota stone slab 16 to 20mm thick as in skirting/steps of stair case laid over & incl.10mm thick cement screeding in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.
S & F in repairs stainless steel plate rack made out of 1mm thick steel sheet of size 75cm x 90cm x 25cm with fixing arrangements complete as per sample kept in GE’s office suitable for officers quarters complete all as specified and as directed by Engineer-in-Charge.
M&L for Branch pieces 100 mm single( equal or unequal) ordinary or inverted (spigot or socket type ) or parallel branches complete all as specified and directed. .
S&F 100mm PVC floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) complete all as specified and directed.
Excavation in trenches in soft or loose soil, not exceeding 1.5 metre deep and not exceeding 1.5 metre wide and getting out complete all as specified and directed. Notes : (i) Payment for excavation shall be made for one time in case the new cable is laid in the same trenches .
Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.
Removing surplus excavated soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and as directed.
M&L Brick protection with sub class "B" bricks (old size) laid dry, flat in trenches over cable with longest dimension perpendicular to the axis of the cable complete all as specified and directed specified .
Sand cushioning in trenches and well ramming in layers with 8 cm below and 15 cm above the cable with fine dry sand for cable protection and complete all as specified and directed. Note: 18 cm punned thickness shall be measured for payment purpose.
S&F 40mm bore GI tubing light grade as in cable protection pipe including all fittings as in replacement complete all as directed.
M&L for boring under road/path/hard standing to pass the HT / LT UG cables upto 50mm dia pipe using mechanical arrangements complete all as specified and directed.
Supply, laying and connecting, LT UG cable XLPE insulated, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor laid in trenches/on poles/walls/in ducts/passing through pipes etc including jointing materials such as cable glands, lugs etc of size 25Sqmm 3.5 core complete all as specified and directed. Note : Epoxy cable Joints shall be measured and paid separately
M&L for plain cement concrete 1:3:6 type D2 using 40mm graded crushed stone aggregate as in foundation of pole, protection of UG cable, concrete base, etc complete all as specified and directed.
S&F LED type security/Street Light fitting 120 watt with LED lamps, pressure die cast housing with toughned glass cover,suitable gasket and IP 65 protection including all other standard accessories as per manufactures instruction and including fixed on poles/walls with clamps, nuts,bolts &washers including connecting to fitting including taking down old light fitting any type complete all as specified and directed.
Supply and install steel tubular swaged poles compleet with cast iron base plate, find taper plug, bolts and nuts and screws all as specified , 6.5 mtrs long complete including painting with two coats of alluminium paint over a coat of red oxide primer and making of 5 strips of 30cm with in black and white colour of altimate strip and wiring pole number etc all as specified and directed.
Supply and fixing bracket made out of 40 mm dia galvanized steel tubing medium grade 1.5 m long including bending if required as direct ,02 nos clamps made out of MS flat iron 40X6mm of suitable size fixed with bolts, nuts and washer including drilling holes and grouting with the same for fixing bolts complete.(Rates quoted by the contractor shall deemed to include for nut and bolts).
M&L for ASHLOK'S Safe Earthing Electrode │ ASEEL 393 CP 250 │ Conceptualised & Developed using ASHLOK'S Pipe - In - Pipe Technology │ Designed & Manufactured using M.S Pipes │ Outer Dia is 76 mm with a wall thickness of 1.6 mm │ Inner Dia is 42 mm with a wall thickness of 2.6 mm │ Over all Length is 3000 mm │External Corrosion Protection : Coper Paleted (250+ microns) │ Internal Corrosion Protection : A groundbreaking corrosion resistant Crystalline Conductive Compund is filled and compacted in the cavity within the pipes to enhance the electrodes performance. │ Conforms to IS : 3043 - 1987 i.e., Code of Practice For Earthing │ (Tolerance : Dia: ± ı.o mm Wall │ Thickness: ± 0.2 mm │ Length: ± 20 mm). BARON'S Back Fill Compound(s) │CONDUCTOLITE │Conceptualised & Developed by BARON's R & D Centre │ Manufactured using Eco - Friendly minerals │Carbon based, high conductive material │Resistivity : < 0.5 ohm-metre (In dry conditions) │Resistivity is not moisture dependant │Ph Value : 6.5 - 8.0 │Electronic & Ionic conduction │Less susceptible to shrinkage │Maintenance Free │Excellent bonding properties │Enhances electrode size │It helps to improve the conductivity of the soil to aid in faster current dissipation while at the same time having hygroscpic & corrosion resistive properties. │Packing Size : 25 kilograms │ Recommended for harsh conditions incl Poly Plastic Eartpit Chamber Cover Heavy Duty (8 ton Capacity) complete all as specified and as directed.
S&F Copper strip 32 x 6mm buried in ground/fixing on wall incl saddles and fixing screws complete all as directed.
Supply and fixing Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as directed.
BEHL AND COMPANY
M/S SANGA SINGH AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .