Annual maintenance of Annamacharya kalamandiram and Sapthagiri Buildings at Tirupati for the year 2026 27

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead - Brick work.

Demolishing and disposal of unserviceable materials within 100 metres lead - Unreinforced cement concrete up to 15 cm thickness

Dismantling, clearing away and carefully stacking materials useful for re-use, through scraping of old plastered surface

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including Ordinary soil-Manual means upto 3m depth.

Conveyance of waste materials such as dismantled materials and surplus excavated earth etc., with a lead of 5 km from work site and as directed during execution etc., complete

Filling of foundations and basement with best river sand in layers of not more than 15 cm thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete (1:4:8) using 40 mm ( 0.54 Cum), 20mm (0.27 Cum) and 12 mm (0.09 Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete.

Cement Concrete (1:2.5:5) using 20 mm (0.54 cum) and 10mm (0.36cum) nominal size HBG crushed metal from any source conforming to relevents ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete.

Supply and placing of the M20 Design Mix using of 10 mm HBG crushed metal 0.480 cu.m, 6 mm HBG Crushed metal 0.320 cu.m, sand 0.400 cu.m and cement 350 kg with water cement ratio of 0.53 (185.50 ltrs/cu.m of CC) etc., from any source conforming to the relevant ISI standard including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing including centering charges, shuttering charges etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges, for finished item of work

-do- 50mm thick precast slabs using 10 mm graded aggregate of HBG crushed metal from any approved quarry with necessary reinforcement excluding cost of steel and tying of grills, centering charges but including cost of necessary form work and cost and conveyance of all materials curing as directed by the department.

RCC M20 Design mix precast slabs 80 mm thick using 20 mm size graded HBG crushed metal

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars of below 36 mm Fe-500/ Fe-500D (as per IS 1786 - 2008) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered). Note: Unless otherwise fabrication and placement of steel, no pre-pament shall be made against the supply of steel reinforcement

Construction of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non modular or traditional size) (230 x 110 x 70 mm) including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Construction of 110 mm thick Brick partition walls in C.M.(1:4) using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all materials etc,. complete

Plastering in Cement mortar (1:3) 12 mm thick using best river sand including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

Plastering in Cement mortar (1:5) 12 mm thick using best river sand including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

Plastering in Cement mortar (1:3) 20 mm thick using best river sand including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

Plastering in Cement mortar (1:5) 20 mm thick using best river sand including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 500 ml of liquid concentrated micronized cement water proof compound/ 100 ml of Integral cement water proofing admixture complies with IS:2645-2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item.

Providing Flush Pointing with C.M(1:3) to Random Rubble masonry including cost and conveyance of all materials etc., complete as directed during execution.

Providing Unplasticized PVC SWR Rain water downfall pipes of 110 mm dia PVC pipe with wooden bock of size 150 x 50 x 50 mm ISI:13592 Type -A mark with necessary shoes, bends, collars etc., including making holes in walls, RCC slabs, beams, columns, including fixing with necessary wooden plugs (where it is required pipe clear of wall, wooden blocks of size equal to that of ears of pipe shall be used). screws, iron clamps of 18 G and making good the same including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness (Total Coated Thickness-TCT), Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW)

Flooring with Antiskid floor tiles Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work.

Finishing the sides of walls with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg/10sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete

Flooring with Double charged (with double layer pigment) / multi charged stain free full body porcelain vitrified tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs.1st quality of following varieties of series and shades set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & joints with spacer joints with 3 mm wide jointed neatly with filer material of cement/epoxy grout/white cement paste to full depth mixed with pigment of matching shade as directed during execution, including cost and conveyance of all materials, etc., complete - for finished item of work.

Flooring with Plain cement concrete general purpose floor tiles of 25 mm thick conforming to IS:1237 using aggregates, cement, pigments of size 300 X 300 x 25 mm of any shades. confirming to IS 1380-12013/IS 1237-2012 of following sizes set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work.

Flooring with high Moon white polished granite 18 to 20 mm thick slabs up to 8'-00 (2.43 M) set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint Gr-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply of M.S. Tubes & pipes of all diametres as per IS-1161 as and when required by the dept., as directed during execution.

Supply of GI Binding wire 16 Gauge

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Supply of Medium Teak wood scantlings up to 2 mts

Labour charges for wrought and put-up for wood scantlings.

Supply of 18 mm thick MEDIUM DENSITY FIBRE BOARD INTERIOR GRADE ONE SIDE LAMINATED

Supply of quarry rubbish including all charges etc. complete.

Supply of gravel for road works including cost and conveyance of all materials incidental charges etc., Complete

Labour charges Spreading gravel or sand including watering and rolling with hand roller irrespective of thickness in layer complete as directed during execution

Supply of the following labour as and when required by the dept., as directed during execution.

Mason 2nd class

Carpenter 2nd class

Carpenter Helpers

Plumber 2nd class

Plumber Helpers

Painter 2nd class

Painter Helpers

Welder 2nd class

Man/ Women mazdoors

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. '--do-- Door Frame section of 45x75 MM. The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. Minimum of 4 hinges will be required for fixing the door with the frame.

Supply of alluminium specials including Cost and conveyance of all materials etc complete, as directed during execution.

Anodised alluminium Aldrops sliding door bolts 16mm x 300 mm

Anodised alluminium Aldrops sliding door bolts 16mm x 200 mm

Anodised alluminium tower bolts 10 mm dia x 250 mm long with ISI Mark IS 204

Anodised alluminium tower bolts 10 mm dia x 150 mm long with ISI Mark IS 204

Anodised Alluminium Door handles IS 208 150 mm long

Supply of Plain Float Glass 5 mm thick

Supply of machinery in desilting works guide lines for engaging Excavator- Loader (JCB) (Capacity / out put of machine 0.24/1 Cum)1. The owner should transport the JCB to the work spot at his own costs.2. The Excavator- Loader (JCB) should be able to excavate a minimum of 40 cubic meter of Earth per hour.4. The rate of per hour is inclusive of all the costs like POL, Transportation of Machine, Driver Batta and other incident charges.5. The payment of the Excavator- Loader (JCB) should be paid hourly basis subject to the condition 2&3 cited above.6. The Excavator- Loader (JCB) should have the Tacho metre and it should function properly.

Hire charges for PLANT and MACHINARY for Tractor with pulling

Cleaning of septic tanks through sludge gulper (up to 4000 liters) including the conveyance of sludge gulper, operational charges etc., complete as directed during execution.

Hire charges for Core drilling machine, fuel charges and crew charges etc., as directed during execution of the work.

Supplying & Fixing Orissa Pan white glazed W.C of size 580mm x 440mm x 260 mm 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap with ISI mark or equivalent approved by the department.

Supplying and Fixing European Water Closet of 1st quality confirming to IS:2556-Part-2-1973 of white glazed with 'P' trap with ISI mark or equivalent approved by the department.

Supply & fixing of PVC low level system 10 litres capacity Dual Flush with internal components & short bend.

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996

Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/Neycer) 550 x 400 mm - Single C.P. Pillar cock 1st quality confirming to IS:2556-Part-4:1972 with ISI mark or equivalent approved by the department, with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Esso/Senior/Nice or equivalent complete with standard CI brackets including wooden block

Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457.2 mm

Supplying and fixing towel rod (CP) of 24'' long and 3/4'' dia

Supplying and fixing NP soap dish heavy type with NP SCREWS

Supply and Fixing 12.7mm NP two way Angle cock Indian make heavy duty

Supply and fixing 12.7mm dia NP pillar cock heavy duty 1st quality Indian make.(400 grams) Seiko/Senoir

Supply of SYMET BIB COCK (CAT.NO:121) Standard 15 mm size as per IS 9763-2000 with ISI mark male thread with deluxe handles,86 mm long and 102 mm high and 43mm breadth 12mm seat dia and replaceable washers,having approx. weight of 90gms.

S & F 12.7 x 88.9 CP fancy shower

SYMET 2 in 1 Faucet (1 mts. Tube) with hook ( Prayag make CAT.NO:187) as directed during execution.

Supply & fixing 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality

Supply of Round Jali

Supply of Galvanized iron fly proof wire mesh of not less than 26 gauge

Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames H.D.-10with 560mmdia. clear opening (New item) with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Flowgurard SDR 11 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

22.20mm ODPipe - SDR 13.5

28.60mm ODPipe - SDR 13.5

34.90 mm ODPipe - SDR 13.5

Supplying, laying and jointing in position the following diametre of Prince / Sudhakar make or equivalent ISI standards make PVC/ SWR pipes 6 kg/sq.cm (Type-B) including labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc., including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc., with solvent jointing as per standard practice as directed during execution.

-do- 160 mm dia Double socket pipe

-do- 110 mm dia Single socket pipe

-do- 75 mm dia Single socket pipe

Supply of UPVC / SWR pipe fittings( U.V resistant) as per approved make with ISI standards

-- do - 110 mm dia door bend 87.5 degrees

-- do - 110 mm dia Plain bend 87.5 degrees

-- do - 110 mm dia coupler

-- do - 110 mm dia single Tee

4" (101.6 mm ) Nahany Trap ( Without Jali with inlet)

Reducer 110 x 75 mm dia

-- do - 75 mm dia door bend 87.5 degrees

-- do - 75 mm dia Plain bend 87.5 degrees

-- do - 75 mm dia coupler

-- do - 75 mm dia Single Tee

Painting with Ready mixed Synthetic Enamel paint in all shades -Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter, approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Single coat for old wood work

Single coat for old iron work

Single coat for old plastered surface

Painting single coat for old wall plastered surface with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and shade, after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site, cost of brushes to have smooth finish, and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

Painting single coats for old wall plastered surface external with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and shade, after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site, cost of brushes to have smooth finish, and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Supply of glow sign vinyl stickered name plate / sign (or) instruction boards using 4mm foam white sheet as back ground and glow sign vinyl sticker one layer for letters of different sizes as directed during execution including cost of 4mm foam sheet vinyl sticker and all labour charges for computer design and cutting, pasting and fixing the boards as directed during execution .