REPAIR TO DRAIN PARAPETS CULVERTS COVERS SLABS AND MISC B R WORKS REPAIR TO BARBED WIRE CHAIN LINK FENCING BOUNDARY WALL RETAINING WALL AT ALHILAL MIL STN

Amount

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.

All as per item No. 2 above but except brick.

M&L walling of random rubble stone masonry uncoursed, with best quality locally available harder stones such as granite, trap, basalt stone etc. well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

All as per item No. 4 here-in-above but except stone.

M&L raised pointing to random or polygoned rubble walling, uncoursed, or brought upto course in CM 1:4 complete all as specified and directed.

Supply only 110mm dia PVC (SWR) pipes, single socketed in any length as in weep holese complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

S&F rolled mild steel sections like angle, channel, flat etc as inframed work such as grills, gratings,etc,with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framed work of water tanks and similar work confirming toFe-290Gde E-165 complete all as specified & directed by Engineer-in-charge.

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

M&L PCC 1:5:10 Type E-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc complete all as specified and directed.

M&L PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in surface channel or drains etc. complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.

M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.(inner girth only measured)

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base flooring finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, round or chamfered on edges complete all as specified and directed.

M&L 20cm x 20 cm x 25mm thick, coloured rubber moulded chequered cement concrete tiles with grey cement and pigment set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L coloured parking tiles size 400mm x 400mm x 12mm laid in floor or wall over 15mm screed bed in CM 1:4 with grey cement and pigment, any shape and size complete all as specified and directed.

M&L providing ands laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with CM 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5mm) including making drainage opening wherever required complete all as specified and directed.

Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer, complete all as specified and directed.

Taking down cement plaster including tiles of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L rendering 15mm thick plaster in cement mortar(1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without suing extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L RCC M-15 type B1 (using 20mm graded crushed stone aggregates) in slabs supported to walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Form work to rough finished surfaces of concrete for soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia in stirrups, spacer and binder for TMT bars complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L 75mm thick PCC 1:2:4 type B2 (using 20mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L 75mm thick PCC 1:2:4 type B2 (using 20mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

Cleaning away all grass ,vegetation, saplings ,shrubs ,brushwood, under growth, roots, and trees not exceeding 30 cm girth(measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground completea all as specified and directed.

Excavation in trenches,nexc 1.50m wide and n exc 1.50m in depth for foundation,etc or for shafts,wells,cesspits,manholes,pier holes,etc n exc 10 sq m on plan and getting out any type of soil complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavation post holes (or similar holes) in any type of soil each n exc 0.50 cu.m,getting out,returning,filling on and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25cm, complete all as specified and directed.

M&L PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L rolled mild steel work as in posts & struts in fencing, using angle, iron or other section, including cutting tops to shape as directed, drilled holes, notching for wire etc flat iron fillets (for securing wire mesh) including all necessary drilling, bolting and riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directe. Note: Unit rate is also including locking holes after fixing of barbed wire and welding to bend portion as directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barded with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed.

Restraining and resecuring including making good staples and typing with mild steel binding wire (whenever required) etc. in existing barbed wire fencing of any decription complete all as specifed and directed.

S&F mild steel galvanised chain link fencing size or any type wt 3 to 4 Kg per Sqm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or squire heads at one end and screwed the other ends, or screwed both ends each screw to be fitted with washer and one hexagonal or square nuts, length of bolt not exceeding 25mm long, diameter of shank 12mm, complete all as specified and directed.

M&L preparation of old surfaces of steel of any description, over 10 cm width or girth not other wise described and appliying one coat of synthetic enamel paint over existing surface complete all as specified and directed.

M&L flush pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.

M/S AMAN ENTERPRISES (BID ID -3163050)

M/S Bharmouri Construction (BID ID -3163885)

VIVEKA ENTERPRISES (BID ID -3162957)