Construction of new 1x10 MVA R/stn Hari Mandir

Amount

10MVA, 66/11 kV, ONAN, Copper wound. Out-door Type, conventional Power Transformer, Oil Filled with OLTC and all accessories including HT and LT Terminal connections

12 Core 2.5 mm2 Control cable copper Armoured , 1.1 kV Grade, ISI, FRLS.

4 Core 2.5 mm2 Control cable copper Armoured , 1.1 kV Grade, ISI, FRLS.

2 Core 2.5 mm2 Control cable copper Armoured , 1.1 kV Grade, ISI, FRLS.

72.5 kV, 1250 A, 31.5 kA, 3 phase Outdoor Type SF6 Circuit Breaker alongwith support structure,marshalling box and required accessories complete.

66 kV, 630 Amp, 25 kA,double break centre rotating type DBCR) with Earthing Blade,G.O Isolator alongwith support insulators, operating mechanism, base channel down pipe & all required accessories complete

66 kV Current Transformer (66 kV, Multi Ratio Multi Core, Outdoor)

66 kV Voltage Transformer (66 kV/110 V, Multi-Core, Outdoor)

Gapless Surge arrestor,60 kV,10 kA, Lightening Arrestors LA with Polymer housing Stn Type

66 kV C&R Panel along with O/C, E/F relays (1EC61850, mimic diagram, Voltmeter, Ammeter, Annunciation Windows with annunciation relays, 3-phase Tri-vector meter -5 Amps, DLMS Compliant with RS-485 port

66 kV Post Insulator Polymer 72.5KV,350kV Impulse, creepage distance 2248m

STRUCTURES

Galvanised Steel Structures

Galvanised Nuts & Bolts

CONTROL CABLES

12 Core 2.5 mm2 Control cable copper Armoured, 1.1 kV Grade, ISI, FRLS.

6 Core 2.5 mm2 Control cable copper Armoured, 1.1 kV Grade, ISI, FRLS.

2 Core 2.5 mm2 Control cable copper Armoured, 1.1 kV Grade, ISI, FRLS.

Lugs, Ferrules etc.

CONDUCTOR & HARDWARE

200 mm2 ACSR Conductor Panther

T Clamps

Single Tension Fittings

66 kV Post Insulator Polymer 72.5kV,350kV Impulse, creepage distance 2248mm

Earth wire 7/4 mm sq.

Gl flat for earthing 50x6 mm

PG Clamps

Substation Main equipment Transformer bay

72.5 kV, 1250 A, 31.5 KA, 3 phase Outdoor Type SF6 Circuit Breaker alongwith support structure,marshalling box and required accessories complete.

66 kV, 630 Amp, 25 kA,double break centre rotating type DBCR) without Earthing Blade,G.O Isolator alongwith support insulators, operating mechanism, base channel down pipe & all required accessories complete

66 kV Current Transformer (66 kV, Multi Ratio Multi Core, Outdoor)

Gapless Surge arrestor,60 kV,10 kA, Lightening Arrestors LA with Polymer housing

66 kV C&R Panel along with O/C, E/F relays and differential relays (IEC61850), mimic diagram, Voltmeter, Ammeter, Annunciation Windows with annunciation relays, 3-phase Tri-vector meter -5 Amps, DLMS Compliant with RS-485 port

66 kV Post Insulator Polymer 72.5kV,350kV Impulse, creepage distance 2248m

STRUCTURES

Steel Structures

Nuts & Bolts of sorts

CONTROL CABLES

12 Core 2.5 mm2 Control cable copper Armoured , 1.1 kV Grade, ISI, FRLS.

6 Core 2.5 mm2 Control cable copper Armoured , 1.1 kV Grade, ISI, FRLS.

2 Core 2.5 mm2 Control cable copper Armoured , 1.1 kV Grade, ISI, FRLS.

Lugs, Ferrules etc.

CONDUCTOR & HARDWARE

200 mm2 ACSR Conductor Panther

T Clamps

COST FOR 11 kV INDOOR SWITCHGEAR OF 66/11 kV SUBSTATION

11 kV VCB Panel Board (12 kV. 12S0A, 25 kA, Outdoor) with O/C, E/F relays (IEC61850), Mimic Diagram, Voltmeter, Ammeter, Annunciation Windows with annunciation relays, 3-phase Tri-vector meter -5 Amps, DIMS Compliant with RS-485 port (1+5)

11 kV, Gapless Surge Arrestor, 9 KV, 10 KA, LA with Polymer housing, Stn. Type (3/4/5/10 Sets)

11 kV XPLE,armoured Power Cables-

11 kV 630 mm2 Single Core Cable (with one spare length) armoured

11 kV 3-Core 300 mm2 armoured, FRLS

11 kV Indoor Heat Shrinkable Cable Termination Kits

11 kV outdoor Heat Shrinkable Cable Termination Kits

11 kV Indoor Heat Shrinkable Cable Termination Kits

11 kV outdoor Heat Shrinkable Cable Termination Kits

11 kV Isolator, double break,3-pole, 600Amp, horizontal mounting Type, with Earth Switch.

11 kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp

9 Mtr. Long Pole(ST-410 SP33)

Gl of sorts

100 kVA, 11/0.4 kV, 3 phase ,50 Hz.ONAN ,AI. Wound, outdoor Stn. Transformer along with X-mer Oil (EE Level-II)

120 mm2 PVC LT Cable 4 Core, armoured, FRLS

Cement bottoming 1:2:4 mix as per REC standards 0,5cum per Pole

Earthing of substation -Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of si2e 25 mm x 3 mm for connection of transformer body.G.O Set & lightening arrestor as per IS 2629/85, Gl nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

Earthing Complete by Gl Pipe 40 mm or Gl Rod 20mm 2.5 mtr long through Gl strip

MCCB - 200 Amps

Misc Equipments

a) . Battery Bank 30 V,100 AH , of 15 No. cells of 2 V each, sealed maintenance free VRLA type, High impact Polyprophelene copolymer container, flame retardant. b) . 30V,100 AH , Float-Cum-Boost Charger With Full wave rectification for 220 V, lPhase, 50 HZ AC Input SuddIv .

Distribution Panel (30 V, DC) made of CRCA thickness not less than 2mm. Powder Coated, degree of protection IP43 for 2 No battery incoming supply with 2 No 63 Amps DP MCBs for incoming supply Double busbar of adequate size, 12 No DP DC MCB (0-32A) including indication lamps and cables and other accessories

Distribution Panel (415 V, AC) made of CRCA thickness not less than 2mm. Powder Coated, degree of protection IP43. 200 Amps Switch Fuse disconnector for incoming supply and 5 No TPN MCB's (16-125 Amps) and 5 No DP MCBs (0-32A), rectangular busbar suitable for 200 Amps continuous Supply including indication lamps and cables and other accessories

TELECOMMUNICATION FACILITIES

Rubber Mat lmx2m 19mm thick

Fire Extinguisher Co2 Type of 4.5 kg capacity for control room

3 Sand Bucket Fire Extinguisher

Helmet

Rubber Gloves for 66 kV level

Rubber Gloves for llkV level

Safety Belt

Safety Shoes

Earthing rod (set of 3 rods)

HV Detectors all voltages

12 kV Capacitor Bank with VCB Panel with complete arrangement for connection with 11 kV incomer panel, Series Reactor, Isolator, RVT, Surge Arrestors, HT Cable with termination Kits, Control Cables, CRCA Cubicle Panel etc with structure, foundation & accessories. (3.6 MVAR)

ERECTION OF 5KM OF 66KV LINE ON 13M ST POLES 200SQMM ACSR CONDUCTOR WITH STANDARD SPAN OF 58 METERS

Pole 16 Mtr Long ST-410 SP80

GI Channel /Angle X-arm including clamps

100 mm² ACSR Conductor

PG Clamps for 100 mm² ACSR Conductor

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Suspension Fitting

Tension Fitting

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Red Oxide

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standards .7cum/pole

Aluminium Jointing Sleeves

Galvanised Stay Set with 50 x 8 mm stay clamp, guy insulator(2Nos.), anchor plate (300x 300 x 8 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 20 mm diameter solid GS stay rod & 7/4.00 mm dia GI stranded wire complete

Guard netting

66 kV, 630 Amp, 25 kA,double break centre rotating type DBCR) with Earthing Blade, G.O Isolator alongwith support insulators, operating mechanism, base channel down pipe & all required accessories complete

STABILISATION OF EXISTING 66 kV SAMBA - VIJAYPUR DEFUNCT LINE

100 mm² ACSR Dog Conductor

PG Clamps for 100 mm² ACSR Conductor

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Suspension Fitting

Tension Fitting

Galvanized Nuts and Bolts

Danger Plates with Clamps

Aluminium Jointing Sleeves

Self Supporting Tower

Design, Supply, Erection of 1 No. self supporting towers suitable to match the height requirement of NHAL (complete job)

COMMON MISCELLENOUS WORKS IN 66/11 KV SUBSTATIONS

Compound walling of identified land by way of Mass Concrete in Foundations and 228 mm Brick Wall of 2 M height

Chainlink Fencing of 66 kV Yard of Substation by way of Mass Concrete in Foundations and chainlink fencing of 6 ft height

HDPE Pipe Outer Dia 180 mm Inner Dia 152 mm for laying of llkV XLPE Cable from Power Transformer to Control Room

66/11 kV Power Transformer Foundation

66 kV Equipment Foundation & Gantry foundation

Earthing Mat (Gl Flat 50x8)

Earthing Electrode ( 3m long 40mm dia Gl pipe) through Gl wire 8/6 SWG

66 kV Yard Concreting/Metaliing

Borewell with submersible pump

Control Room Building

Truss of Control Room Building

Shift Quarters for JE and SBA

Development of land by removing weeds, wild grass and endulation if any, ornamental land scaping and growing of ornamental trees in unbuilt areas and road sides and development of roads along with surface drains

Yard Lighting

Erection, Stringing and Construction of 66KV DC Monopole for Road Crossing

Design of 66 KV DC Mono Poles with extension nuts, bolts, washers & ladder etc and its foundation (Design of pole & its foundations Duly approved from any of the Govt approved test lab i.e CPRI/IIT Mumbai, Delhi, Roorkee. Or any other institute)

Fabrication, galvanizing, Inspection & supply of 66 KV DC (B Type & 18 mtr bottom x-arm) mono poles as per design with extension nuts, bolts, washers & ladders etc

ACSR Panthar Conductor

Monopole Accessories

7/9 SWG Earth Wire

Number Plate

Danger Plate

Phase Plate in Set of Red, Blue & Yellow

Pipe type Earthing material

Double Tension fitting

70 KN Polymer Insulator.

Vibration Dampers

Repairs Sleeves

Earth Wire Accessories Suitable for 7/9 SWG Earth Wire

Tension Clamp

Copper Bond

Survey including preparation of final tower schedule of martial, marking of location (Route length) and super impose the GPS coordinates.

Check survey & final peg marking (Route length)

Monopole Foundation

Cost of excavation of 66 KV Monopole foundation pits in all candies of soil, back filling and levelling etc.

Cost of concreting for all types 66 KV Monopole foundation including cost of cement, dewatering, shuttering, & curing but excluding cost of reinforcement bars with M20/M25 mix concrete.

Cost for setting & allignment of bolts along with sacrificial & normal template for following 66 KV SC Spl. Monopole.

Installation of steel reinforcement bars in RCC foundation including cost of steel reinforcement bars with cutting, bending, placing, binding etc

Erection Of Monopole

Erection of 66 kv monopoles & there extensions wherever required including all work above ground level including transportation of crane of capacity more then 100 mt.

Laying, tensioning, stringing, clamping, jointing etc complete with ACSR Panther for Single Circuit including hoisting of insulators fitting of all necessary hardware & accessories etc.

Laying, tensioning, Stringing, Clamping, jointing etc complete with ground wire including hoisting of all necessary hardware & acessories for 1 no 7/3.25 mm G.S earthwire

Construction of Machan for safely stringing & destringing of line

Providing barricates for avoidind any accident during the period of excavation to backfilling of soil.

Tack welding of all the bolts at Base plate of Monopole & first section of DC towers.

Earthing work including earth material for pipe type earthing

FABRICO INDIA PRIVATE LIMITED (BID ID -2391273)

INDUSTRIAL ELECTRICALS (BID ID -2392737)

AJAY CONSTRUCTION (BID ID -2393123)