CA NO.CWE BLY/GE (W) /37 OF 2024- 2025 SPECIAL REPAIR TO BLDG NO T-172 (CAMP LOC) AND BLDG NO T-165 JCOs MD ACCN CROSS ROAD AT JLA BAREILLY UNDER GE (WEST) BAREILLY

Amount

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etccomplete all as specified and directed.

Demolition of Concrete (unreinforced) is ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of Reinforcement cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

M&L for cement concrete type D2,1:4:8 (using 40 mm graded stone aggregate) as in mass concrete complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed.

Taking down shutter including frame of cupboard of any description exc. 1 Sqm but n.exc. 2 Sqm each and remove from site complete all as specified and directed.

Taking up or down15 mm steel tubing and connections includinguding cleaning for refixing or removal complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections includinguding cleaning for refixing or removal complete all as specified and directed.

Dismantling water tanks 500 & n exc 1000 and remove from site complete all as specified and as directed.

Dismantling frame truss span n.exc 10 M complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position , framed work complete all as specified and directed.

Dismantling asbestos cement/CGI/PGI (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.

S& F Steel work in tubular trusses includinguding special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 inluding one coat of zinc chromate primer before fabrication distance pieces, cleats etc GDE Fe 410-S. complete all as specified and directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates inluding one coat of zinc chromate primer before fabrication distance pieces, cleats etc GDE Fe 410-S. complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Providing & fixing false ceiling at all heights with GRG (Glass FibreReinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistanceof 99%, NRC0.50 to 0.75 as per IS8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter?locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main?T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm ,suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L?shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing includinguding dismantling of old false ceiling complete all as specified and directed.

M&L for Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tile ( 600 x 600 ) as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including screeding 15mm thick in CM 1:6, complete all as specified and directed.

All as per item No 22 above but on verticle surfaces over 10 mm thick plaster in CM 1:6 all as spd and completed

M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square) size of each tiles 400 x 400 mm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screeding 15mm thick in CM 1:6 s complete all as specified and directed.

All as per item No 24 but on verticle surfaces over 10 mm thick plaster in CM 1:4 all as spd and completed

M&L for glazed coloured ceramic tiles 450 x 300 mm x 7 mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles over and including plastering 10mm thick in CM 1:4, including dismantling floor, hearth or wall tiling/terrazo and removing rubbish off the premises complete all as specified and directed.

M&L for glazed coloured ceramic tiles 300 x 600 mm x 7 mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles over and including plastering 10mm thick in CM 1:4, including dismantling floor, hearth or wall tiling/terrazo and removing rubbish off the premises complete all as specified and directed.

M&L 18-20mm thick Granite of any colour (table rubbed and polished) as in windows cill & cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 , type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging complete all as specified and directed .

M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent , complete all as specified and directed.

M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in Lintel/Roof beam and chajja including bonding agent complete all as specified and directed.

S&F Formwork to soffits of suspended flat slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) with rough finish surface completed all as specified and directed.

S&F Form work to sides and soffits of flat floor or roof beam, beam hings, girders bressume, lintles, contilevers, shelves,Chajjas includinguding support over lungs etc also splays between floor and beams etc. with rough finish surface completed all as specified and directed.

S&F Form work to sides and soffits of of concrete flat surface I e. tread, window cill, railing and roof n.exc. 200 mm wide and side of RCC/PCC band in wall and similar work exc. 200mm but n.exc. 200mm for rough finish surface completed all as specified and directed.

M&L TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed.

S&F Mild steel TMT bars 5mm dia and over upto and includinguding 10 mm dia in stirrups,spaces and binders complete all as specified and directed.

M&L brick work with fly ash bricks conforming to IS 12894 -2002 specificationstraight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed

M & L for half brick work with fly ash bricks conforming to IS 12894 -2002 specification straight or curved on plan exc 6 m mean radius built in CM (1:4) complete all as specified and directed

M&L rendering 10 mm thick in CM 1:6 on brick masonary wall surfaces on fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces on other than fair faces of brick masonary fair finished without using extra cement with using water proofing liquid complete all as specified and directed. (Note -water proofing shall be measured and paid seprately)

Supply Liquid water proofing compound complete all as specified and as directed.

Pressed steel frames size 105 x 60 mm ( use 1.25 mm thick of PBI sheet ) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, including filling of PCC 1:3:6 type C0(using 12.50 mm graded stone aggregate) supplied and fixed complete all as specified and directed.

Pressed steel frames size 125 x 60 mm ( use 1.25 mm thick of PBI sheet ) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, including filling of PCC 1:3:6 type C0(using 12.50 mm graded stone aggregate) supplied and fixed complete all as specified and directed.

S&F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F 35mm thick factory Glazed and skeleton shutters, open rebated of saal wood second class hard wood rail and stles and prepared to receive glass, gauze, etc. (without sash bars), divided into squared, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.(Note :- S & F Glass/gauge shall be measured and paid for separately)

S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F 140 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring as specified and directed.

S & F Solid Prelam PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing

S&F 30 mm thick factory made one side Prelam PVC sheet other side decorative (door shutter) used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.

S&F steel windows with pressed steel frame of size 95 x 45mm (using 1.25 mm thick PBI sheet) ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wie gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002 Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (II) rate for filling PCC 1:3:6 type C0 (using 12.50 mm graded stone aggregate) as in frame deemed to be including in quoted rates. (iii) MS grill shall be measured and paid seperatly under relevant item of schedule

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.

S&F 100 mm size butt hinges medium weight stailess steel complete all as specified and directed.

S&F 150 mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as spd & directed.

S&F 300 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed

S&F 1000 litres, rotational moulded polyethylene of white colour in tripple layer water storage tank (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15 mm dia steel water tubing galvanized medium grade concealed with and including all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.

S&F 20 mm dia steel water tubing, galvanized, medium grade concealed with and including all fittings, fixed to walls and ceiling or in floor complete all as specified and as directed.

S&F in replacement vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete includinguding fancy 15 mm dia CP pillar tap, 32 mm diaCP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.

S & F in replacement fancy type 125mm size brass CP shower rose all as specified.

S&F in replacement 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.

S&F in replacement 15 mm dia bib cock two way fancy type chromium plated with flange quarter turn complete all as specified as directed.

S&F in replacement SS AE-SI 316 grade tubular towel ring complete all as specified as directed.

S&F in replacement brass chromium plated tubular towel rail 20 mm dia complete all as specified.

S&F in replacement 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in replacement fancy type brass chromium plated soap dish of 160x160x90 mm ,complete all as specified and as directed.

S&F in replacement fancy type chromium plated brass angle/stop valve type suitable for 15mm bore pipe complete all as specified.

S & F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified.

S&F in replacement of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S&F in replacement 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as specified.

S&F in replacement vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 110 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified.

S&F in replacement PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed

S&F in replacement PVC (SWR) floor trap with grating includinguding jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F in replacement PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting including complete all as specified and directed by Engr-in-charge.

S&F in replacement PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting including complete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F in replacement 20 mm dia stainless steel 1.0 mm thick fancy type curtain droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required including fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

M&L two coats of exterior weateher emulsion paint on new plastered wall surfaces over a coat of primer of any description including preparation of surfaces, complete all as specified

M&L for two coats OBD on newly plastered wall surface with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coat of plaster of paris putty of 1 mm thickness complete all specified and directed. ( Note :- Application to be done through authoried apllicator manufacturer)

M&L two coats of exterior weateher emulsion paint on old plastered wall surfaces of any description includinguding preparation of surfaces, complete all as specified

M&L for complete removal of exiting treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate girt to make surface clean, free from dust, loose paint etc by skilled labour and applying two coats of OBD on wall with airless electric over a coat of primer applied using airless electric sprayer over one coat of plaster of paris 1mm thickness complete all as specified and directed (Note :- Application to be done through authoried apllicator manufacturer)

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 m in depth, getting out in soft/loose soil etc., leveling/grading and ramming bottom of excavation complete all as specified and directed

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil, complete all as specified and directed.

Removing surplus excaveted soil to a distance exc 250 Mtr and nexc 500 Mtr depositing where directed at a level n. exc 1.5 Mtr above the starting point complete all as specified and directed.

M&L for 150 mm bore reinforced concrete pipes class N P-2, laid and jointed complete with collars layring over concrete bed for 150mm in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and tested all as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in channels/benching of manhole, laid to shape and slope and surfaces finished even and smooth using extra cement including form work etc complete all as specified and directed.

M&L providing pre cast reinforced cemnent concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast RCC manhole / septic tanks covers including all form work and setting in CM 1:4 all as specified and shown on drgs complete all as specified and directed

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregrate) as in coping, kerb including necessary form work complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced) 150mm dia set in cement mortar complete all as specifed and directed.

Cutting into existing manholes for connecting new drains making good to open and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1,smooth finished and reforming benching

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation bed of manhole, drains and steel post embeded and sub base for floorfinish etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base and floor/paving and finish the surface even and fair complete all as specified and directed.

M & L for sand cushion over PCC before laying interlocking tiles & for under ground cable as specified and directed

M&L for rubber moulded glazed interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade, machine pressed completed as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for cement Concrete coloured interlocking 60 mm thick paver blocks shall be factory made with casting in rubber/pvc moulds & compacting on a vibro table assembly and shall be cured in curing tank for atleast 14 days and then air dried before use. The paver block shall be confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade. Approved design, shape, size and colour of top layer complete all as specified and directed.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), includinguding making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever equired complete. (Note :- Size to be given by GE)

S&F in replacement factory made PVC Cupboard frame of the size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete as per direction of Engr-in-Charge, manufacturer's specification and drawing.

S&F factory made PVC cupboard flush type shutter of 30mm thick consisting of frame made out M S tubes of 19 gauge thickness and size 19mm x 19mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/ cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both side of inside panel includingiding necessary items to fix the shuter to frame such as 100mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton (made by sticking 2nos. PVC foam sheet of 5mm thickness using PVC solvent cement adhesive). complete as per direction of Engr-in-Charge.

S&F PVC boards 19/20 mm thick any colour/ prelaminated as in cabinets including shelves and shutters, fixed with screws and adhessive and as manufacturer's instructions including piano hinges, magnet catcher, handles etc.complete all as specified and directed.

S&F 200 mm long Stainless Steel glossy finish handles with SS screw, complete all as specified and as directed

S&F in replacement 2 in 1 chromium plated wall mixture with connection for shower arragement complete all as specified and directed.

S & F Plastic Vitreous china wash down closet (padestal pattern) white complete, black including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified.

S & F Plastic water closet white seat, black cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S & F Brass CP hand shower (health faucet) with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed.

S & F in replacement water jet of EWC chromium plated with PVC connection complete all as specified and directed

S&Fin replacement Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet complete all specified and directed.

S & F in replacement 0.8 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm) , including waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and directed

M&L for preparation of old untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Taking down carefully aluminium point wiring any type includinguding battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site includinguding making good disturbed surface to match with the existing surface complete all as specified.

Taking down carefully UNSV main switch DBs of any description of an size in any position complete all as specified.

Taking down submain wiring any size including all accessories complete all as specified and directed.

Material and labour for point wiring with single core PVC sheathed 1100 volt grade FRLSH cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and includinguding non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws, rawl plugs (concealed conduit wiring in walls and casing capping on ceiling or roof) includinguding pressed steel terminal sunken boxes and covered with 3 mm thick plastic laminated sheet cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and includinguding PVC sheathed 1100 Volts grade FRLSH cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:- (a) One light / fan/ exhaust fan point controlled by one switch.

(b) One 5 pin 6 Amp switch socket out let point on an independent board.

(c) One 5 pin 6 Amp socket out let point controlled by one switch on same board.

(d) One buzzer/ bell point controlled by one push button on the same board with other switches or independent complete all as specified and as directed.

(e) One light point controlled by two 2 - way switches , on indepndent board.

All as per item No.121 here in before but for one 16 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLSH (Nominal Area) PVC unsheathed copper conductor single core multistranded including 2.5 sq mm FRLSH PVC copper conductor single core used as earth continuity conductor complete all as specified and directed.

S&F switch piano flush type 6 Amp single pole one way complete all as specified and directed. .

S&F socket out let 2 in 1 flush type 6 Amp 5 Pin complete all as specified and directed.

S&Fswitch piano type 16 Amp flush type 240 Volt complete all as specified and directed..

S&F bell push complete all as specified and directed..

S&Fsocket out let 6 Pin 2 in 1, 6/16 Amp flush type 240 Volt complete all as specified and directed.

Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.

Supply and fix fan regulator 150 watts electronic flush socket type with five stepped range hum free complete all as specified and directed .

M & L lamp holder, PVC / Poly carbonate, insulated body modular type with back plate batten/angle type for batten fittings complete all as specified and & directed

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp includinguding connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder includinguding LED tube light connecting up with three core flexible copper conductor cable of uitable size from ceiling rose complete.

Supply and Fix in replacement LED lamp 12 Watt, 230 V , AC integrated circuit complete all as specified and directed.

Supply & Fixing in replacement security light fitting, LED type, 20 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and includinguding nut, bolts and GI clamps of size 50 x 6 mm as required includinguding two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.

M&L for sub main wiring with two single core 6.0 Sqmm (FRLSH) copper conductor PVC unsheathed cable medium grade includinguding PVC conduit (appropriate size) concealed in wall for sub main connection includinguding 6.0 Sqmm (FRLSH) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. ( Note :- Two runs of 6.0 sqmm (FRLSH) and one run of 6 sqmm (FRLSH) copper conductor shall be measured as one unit length.)

Taking down carefully ceiling fan and keeping in safe custody for refixing at site after bldg repair including Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying includinguding filling cavities with filler, one coat after cleaning all dust etc. ( painting and minor repairs etc complete all as specified and directed.

Taking down carefully exhaust fan and keeping in safe custody for reuse at site after bldg repair including Painting of Exhaust fan complete with synthetic enamel paint by spraying includinguding filling cavities with filler, in smoke grey colour paint one coat after cleaning all dust etc. ( painting and minor repairs etc complete all as specified and directed.

S&F in replacement MCB SPN 40 Amp 240 volt 'B' curve, 10 KA complete all as specified and directed.

S&F in replacement MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed.

S&F in replacement MCB Triple pole and neutral 40 Amp 415 Volt 'B' curve 10 KA complete all as specified and directed.

Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete all as specified and directed.

Supply and fix flush sheet metal enclosure TPN DB 4 way 415 V with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar, earth bar and neutral links complete all as specified and directed.

Material & Labour for earthing complete includinguding taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and includinguding 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building includinguding 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and includinguding excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced all as per electrical plate No. 3 of SSR Part-I complete all as specified and directed.

Supply, laying & testing in replacement UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm, 4 core complete all as specified and directed

M&L Fly ash bricks common burnt clay building bricks for LT UG cable protection complete all as specified and directed.

S&F in replacement GI tubes light grade of dia 80 mm with all fitting and fixed complete for protection of LT UG Cables laid to walls or in floors or along with poles etc complete all as specified and as directed.

S & F switch piano, flush button, Two way 6 A, complete all as specified and directed .

S&F indoor decorative LED City-3 light fitting suitable for & includinguding single 12 Watt LED lamp with polycarbonate body with upper globe complete all as specified and directed.

Supply and fixing Buzzer, Ding Dong AC. 230 volts,single pole complete all as specified and as directed.

Supply & Fixing security light fitting, LED type, 35 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and includinguding nut, bolts and GI clamps of size 50 x 6 mm as required includinguding two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.

Supply, installing, testing and commissioning exhaust fans PVC body 250 mm sweep, 230 volt, AC, 50 Hz single phase complete and includinguding connecting up with flexible three core copper conductor from ceiling rose to fan connector etc complete all as specified and directed.

Taking down carefully Geyser from existing site and carry out servicing by opening , removing/ cleaning the dust from complete body , complete including one coat of smoke grey enamel paint complete geyser and making good the surfaces of wall and make the fixing arrangement with grouting four Nos fully threaded bolts on wall or as reqd at site all as directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.

Taking down carefully electric/electronic meter and fixing the same after bldg repair all as directed.

Supply and fix TPN DB -VTPN DB 4 way with provn of MCCB , 415 Volt, 3 Phase, 4 wire AC 50 Hz having aluminium Bas Bar phase and the neutral insulated with PVC sleeves, connected with appropriate size copper thimble complete all as specified and as directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires includinguding LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply,laying & testing in replacement UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 3.5 core complete all as specified and as directed.

M/S Gupta Builders (BID ID -3137058)

Goel Enterprises (BID ID -3146076)

Mohit Enterprises (BID ID -3138992)

M/S Rajeev Sharma and Co. (BID ID -3146247)

REHAN CONSTRUCTIONS (BID ID -3139068)