Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST AMOUNT QUOTED | |
| 2 | L2₹3.4 L+₹24,564.43 (7.67%)Rejected-AOC B 69 SECTOR 65 NOIDA GAUTAM BUDDHA NAGAR UTTAR PRADESH 201301 | GAUTAM BUDDHA NAGAR | UTTAR PRADESH | 201301 | L2 | Rejected-AOC SECOND LOWEST AMOUNT QUOTED |
Tender Value
Refer Docs
EMD Value
₹6,508
Closing Date
19 Feb 2021, 5:00 pmClosed
Asst. Executive Engineer (Agri)
Office of the Asst.Executive Engineer (agri), Malappuram, Anakkayam P O
Renovation of Rainshelter at Anakkayam
2021_AGRI_405875_3
AE(3)417/2020
Open Tender
Civil Works - Others
Item Rate
90 days
Anakkayam
Please refer Tender documents.
7 documents required · 7 mandatory
₹520
Yes
₹6,508
Yes
29 Oct 2021
12 Feb 2021
22 Feb 2021
12 Feb 2021
19 Feb 2021
12 Feb 2021
12 Feb 2021 - 19 Feb 2021
Amount
Rennovation work of rain shelters at SSF,Anakkayam
2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
15.19 : Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.
od411/2020_2021 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) re fixing the old trusses etc., including hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Modifyied 10.16.2)<br>Hot finished seamless type tubes
od392/2020_2021 : Dismantling the old shade net from shade houses top without damage the good things including stacking the materials.
15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.6.7.1 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.
50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
50.6.1.8 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
13.40 : Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade:
od394/2020_2021 : Supplying and fixing UV stabilized Polyethylene film 200 micron thick, IR blocking, Anti drip/ fog diffused multilayer, on the G.I. truss work with aluminium locking profile and zig zag spring galvanised with hex washer etc. complete but excluding the cost of aluminium locking profile and zig zag spring.
od395/2020_2021 : Supplying and fixing of Aluminium locking profile with zig-zag spring with steel screws including cost of material and conveyance etc.. complete.
od467/2020_2021 : Supplying and fixing shade net 50-75% for green house side cover.
13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
Alice Biotech Pvt. Ltd.
Bidder Name
Alice Biotech Pvt. Ltd.
National Biotech
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_589063.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .