Up-Grad of Kulani Chandpur Bharmat Colony Kamakhya Mandir NH Holta Simblu Patti Km 0/00 to 9/300 (SH- Imp. of road, P/Places, R/Walls, B/walls, C.D Work, GSB, WBM-II, WBM-III, Tarring, CC Pavement, drain, parapets and road furniture i/c 5 years r.m.)

Amount

Excavation for road way in hilly areas in all heights and depths and in all kinds of soil by manual/ mechanical means, including saturated soil comprising of ordinary soil, ordinary rock, soft rock, hard rock chiseling or wedging out rock (where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required lines grades, cutting width and trimming of side slopes, camber, super elevation and levels as shown in the drawings and as directed by the Engineer-in Charge complete according to the MORD Technical Specification Section 300 and 1600 and sorting out and stacking of useful materials with in all leads and lifts of material in acquired road width and transporting of un-useful materials for filling in road ways, camber, embankments for grade improvements and disposal of all surplus materials to the approved dumping sites through all modes of transportation including head load or animal transport or by mechanical means including leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required.All useful material such as stones shungle, aggregate and slates etcetra shall be sorted out and stacked in proper stack. Recovery of stones to the tune of 877.23 cubic meter quantity at the rate of Rs. 300/- only (Rupees three hundred only) per cubic meter shall be effected from the contractor running bills on pro-rata basis as per actual quantity executed. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him to the extent of damage occurred in all cases.The rate including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Construction of embankment with approved materials obtained from borrow pits with all lifts and lead transporting to site, spreading, grading to required slope and compacted in 200 mm (two hundred millimeter) thickness with three wheel roller 80-100 (eighty to one hundred) KN static weight roller to meet the requirements of table 300.1 & 300.2 as per MORD technical specification section 300,1600 and as per the entire satisfaction and directions of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,GST or any other taxes imposed by the Government.

Earth work in excavation for all types of road structures such as retaining walls, breast walls, culverts, drains, parapets and other similar structures in all kinds and classification of soil, comprising of ordinary mix soil, ordinary rock, hard rock, chiseling/wedging out rocks (where blasting is prohibited) complete in accordance with the lines and dimensions shown in the drawings, including setting out, construction of shoring, bracing, removal of stumps and other deleterious materials and disposal of excavated material upto any leads and lifts including dressing of sides and bottom and backfilling in trenches with excavated suitable approved materials to the original surface in layers not exceeding 150mm (one hundred fifty milimeters) compacted thickness including shoring and strutting and pumping or bailing out water (surface and sub-soil water) up to any depth and any quantum of water and cleaning of slush which may arise out during dewatering complete as per drawing and MORD Technical Specification section 300 & 1600 as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete nominal mix 1:4:8 (One cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size), on ground or under water for all type of structure, in R/wall / B/wall and the like etcetera complete including pumping or bailing out water, dewatering (surface/sub soil water)including removal of slush which may arise at time of laying concrete for all heights/depths including cost of form work and curing complete for 14 (fourteen) days as per drawing and MORD Technical specification section 800, 900, 1200 and 1600 as per entire satisfaction and directions of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,GST or any other taxes imposed by the Government.

Back filling with granular materials behind abutment, Retaining wall/Breast wall, Wing walls and the like complete as per drawings and MORD technical specification section1200,1600 and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Providing 100mm (one Hundred millimeter) dia ISI marked P.V.C. pipe Weep Holes in brick masonry/stone masonry plain/ reinforcement concrete abutments, wing wall/ return wall, retaining walls and breast walls, extending through the full width of the structure with slope of 1 (V):20H (One vertical : twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section700,1200 and as per the direction and entire satisfaction of Engineer-in-Charge complete, including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete, M-10 Grade (M-Ten) Nominal mix 1:3:6 (one cement : three sand : six graded crushed stone aggregate (40mm) forty millimeters nominal size)on ground or under water in open foundations for all types of structures, including pumping or bailing out water/dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete, for all heights/depths and any quantum of water, including cost of form work and curing complete as per drawing and MORD technical specification section 800,900, 1200 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete, Grade M-10 (M-Ten) nominal mix 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm (twenty millimeters) nominal size)on ground or under water in drains including pumping or bailing out water/dewatering (surface and sub soil water) removal of the slush which may arise at the time of laying concrete, for all heights/depths, and any quantum of water including cost of form work complete as per drawing and MORD technical specification section 800, 900, 1200 or as per direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials with all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in substructure Grade M-15 (M-Fifteen) Nominal mix 1:2½:5 (one cement : two and half sand : five graded crushed stone aggregate (40mm) forty millimeters nominal size)on ground or under water, including pumping or bailing out water/ dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete, for all heights/depths and any quantum of water, in toe walls and parapets etcetera including cost of form work and curing complete as per drawing and MORD technical specification section 800, 900 and 1200 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete Grade M-15 (M-Fifteen) Nominal mix 1:2½:5 (one cement : two and half sand : five graded crushed stone aggregate (40mm) forty millimeters nominal size) on ground or under water, including pumping or bailing out water/ dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete, for all heights/depths and any quantum of water,in concrete cradle bedding Type-A including cost of form work and curing complete as per drawing and MORD technical specification section 800, 900, 1100 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, ,GST or any other taxes imposed by the Government.

Providing and laying rubble stone flooring in cement mortar 1:3 (One cement isto three sand) laid over cement concrete bedding M-15 (M-fifteen) inclusive of its cost complete as per drawing and M.O.R.D. technical specifications section 1300 including carriage of materials with in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government

Providing and laying (to level or slope) 900mm (Nine Hundred millimeter) diameter ISI marked reinforced cement concrete heavy duty non pressure pipes I.S class NP-3 for culverts on first class bedding of granular material in single row including providing and fixing collar with cement mortar 1:2 (one cement : two sand) but excluding the cost of excavation, protection works, back filling, concrete bedding and masonary work in head walls and parapets etcetera as per drawing and MORD technical specification section 1100 as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in sub structure including cutting bending binding and placing in position complete including the cost of binding wire upto all heights/depths complete as per drawing and MORD technical specifications section 1000 and 1200 as per the directions and the entire satisfaction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including of Octroi, Royality, Malkana, Toll Tax, GST or other Taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in super structure complete as per drawing and MORD technical specification section 1000 and 1400 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including of Octroi, Royality, Malkana, Toll Tax, GST or other Taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in sub structure Grade-M-20 (M-Twenty) designed mix with cement contents not less than of 350 kgs. (three hundred fifty kilograms) per cubic meter with 20mm (twenty millimeter) nominal size graded crushed stone aggregate in Bed Block, Dirt wall etcetera for all heights/depths, including cost of form work and curing complete but excluding the cost of reinforcement for reinforced concrete work as per drawing and MORD technical specification section 800, 900 & 1200 and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation grade M-20 (M-Twenty) design mix with cement contents not less than 330 kg (Three hundred thirty killogram) per cubic metre with 40mm (Forty millimetres) nominal size graded crushed stone aggretgate as per drawings and MORD technical specifications section 800, 900 and 1200 including the cost of form work and curing complete including carriage of materials with in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure Grade-M25 (M-Twenty Five) designed mix with cement contents not less than 400 kgs. (four hundred kilograms) per cubic meter with 20mm (Twenty millimeter) nominal size graded crushed stone aggregate in Deck slab and the like for all heights, including cost of form work and curing complete but excluding the cost of reinforcement for Reinforced concrete work as per drawing and MORD technical specification section 800, 900 and 1400 complete as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade-M-30 (M-Thirty) designed mix with cement contents not less than 430 kgs. (four hundred thirty kilograms) per cubic meter with 20mm (twenty millimeter) nominal size graded crushed stone aggregate in Wearing Coat including cost of reinforcement for reinforced concrete work form work and curing complete, as per drawing and MORD technical specification section 800, 900, 1000 and 1400 and as per the direction and entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, GST, toll tax, or any other taxes imposed by the Government.

Construction of RCC railing of M-25 (M-Twenty five) grade in cast-in- situ with 20mm (Twenty millimeters) nominal size aggregate true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, (one in five hundred) centre to centre spacing between vertical post not to exceed 2000mm (Two thousand millimeters) leaving adequate space between vertical post for expansion including the cost of form work and reinforcement complete as per drawing and MORD technical specification section 800,900,1000 and 1200 or as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including of Octroi, Royality, Malkana, Toll Tax, GST or other Taxes imposed by the Government.

Providing and errecting a "W" metal beam crash barrier comprising of 3mm (Three millimetre) thick corrugated sheet metal beam rail, 70cm (Seventy centimetre) above road/ground level, fixed on ISMC series channel vertical post, 150x75x5mm (One hundred fifty into seventy five into five millimetre) spaced 2 m (Two metre) centre to centre, 1.8 m (One decimal eight metre) high, 1.1 m (One decimal one metre) below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5 mm (One hundred fifty into seventy five into five millimetre), 330 mm (Three hundred thirty millimetre) long complete as per MORTH Technical Specification section 800 Item to include all as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Loosening of the ground up to a level of 300mm (Three hundred millimeter) below the sub-grade level, watered graded with motor grader and compacted in layers to meet the requirements of Table 300.1 and 300.2 with three wheel 80-100 (eighty – Hundred) kN static roller for sub-grade construction as per MORD Technical specification section 300 and as per direction and the entire satisfaction of the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Construction of sub grade and earthen Shoulder with approved materials obtained from borrow pits within all leads and lifts, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 as per MORD technical specification section 400 including hauling of material with in all leads, lifts and other incidentals and as per the entire satisfaction and direction of Engineer-In-Charge. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Construction of Granular sub base 150 mm (one hundred fifty millimeter) compacted thickness by providing well graded material as per table 400.1, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with tractor mount appropriate rotavator at OMC and compacting with three wheel 80-100 (eighty – oneHundred) kN static roller to achieve the desired density, complete as per MORD technical specification section 400 for grading-I material and as per the direction and entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Providing, laying, spreading by mechanically means and compacting to 75mm (seventy five millimeter) compacted thickness, crushed stone aggregates of Grading-II, 63mm to 45mm (sixty three millimeter to forty five millimeter) nominal size to water bound macadam specification including spreading in uniform thickness using templates, hand packing rolling with three wheeled roller 80-100 (eighty to hundred) kN static weight in stages to proper grade and camber including applying and brooming stone screening Type-B of size 11.2 mm (eleven point two millimetre) nominal size at the rate of 0.20 (zero point two zero) cubic metre per 10 Sqm. (ten square metre) and binding material at the rate 0.06(Zerro point Zero six)cubic metre per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD Technical specification section 400 and as per direction and satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing, laying, spreading by mechanically means and compacting to 75mm (seventy five millimeter) compacted thickness, stone aggregates of Grading-III, 53mm to 22.4mm (fifty three to twenty two point four millimeter) size to water bound macadam specification including spreading in uniform thickness, using template, hand packing motor grader, rolling with three wheeled roller 80-100 (eighty to hundred) kN static weight in stages to proper grade and camber including applying and brooming stone screening type-B of size 11.2mm (eleven point two millimetre) nominal size at the rate of 0.18cum (zero point one eight cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD Technical specification section 400 and as per entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface with hydroulic brooms and spraying primer with bitumen emulsion pressure distributor at the rate of 0.85 kg (zero point eight five kilogram) per square meter as per MORD Technical specification section 500, as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-I) including cleaning the road surface with hydraulic brooms and spraying with emulsion pressure distributor at the rate 0.275 kg (zero point two seven five kilogram) per square meter on the prepared granular surface treated with primer complete as per MORD Technical specification section 500 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-I) including cleaning the road surface with hydraulic brooms and spraying with emulsion pressure distributor at the rate 0.225 kg (zero point two two five kilogram) per square meter on the prepared bituminous surface complete as per MORD Technical specification section 500 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and laying 50mm (Fifty millimetre) thick Bituminous Macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder VG-10 (Viscosity Grade-Ten) at the rate 3.3% (Three point three percent) of mix transported to site within all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per MORD Technical Specification section 500 and as per the entire satisfaction and directions of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,GST or any other taxes imposed by the Government.

Providing and laying 30mm (thirty milimetres)compacted thickness bituminous concrete with minimum 100-120 (one hundred to one hundred twenty) TPH hot mix batch type plant with electronic control grading-II using crushed aggregate 13.2 mm (thirteen decimal two millimetre) nominal size of specified grading premixed with bituminous binder VG-10 (Viscosity grade-Ten) at the rate of 5.5% (Five point five) percent of mix weight and using cement as filler with quantity not less than 2% ( two percent) by weight of total aggregate or as per design mix transported to site, laid with sensor paver finisher hydraulic with sensor control to the required grade, level and alignment, over a previsiouly prepared surface and rolling complete with smoth three wheel roller 8-10 (eight to ten) tonne capacity for initial break down rolling and vibratory roller 8-10 (eight to ten) tonne capacity or pneumatic tyre roller of 12-15 (twelve to fifteen) tonne with tyre pressure of atleast 0.56 MPa (Zero decimal five six) for intermediate rolling and finish rolling with 6-8 (six to eight) tonne smoth wheeled tandom roller to achive the desire compaction as per MoRTH technical specification section 500 complete in all respect or as directed by the Engineer-in-charge including carriage of material within all leads, lifts, and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other equivalent type as per Clause 1501 using M30 (Grade),(design mix) concrete having coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm (twenty five millimetre), mixed in a concrete mixer of not less than 0.2 cum (zero point two cubic meter) capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 (one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 (fourteen) days using curing compound (where specified) and water finishing lines and grade as per drawing and MORD Technical specification section1500 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing of typical NABARD informatory sign board with logo as per M.O.R.D. specification and drawing . Three MS plates of 1.6 mm ( one point six millimetre) thick top and middle plate duly welded with MS flat iron 25mmx5mm ( twenty five millimetre into five millimetre) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm (twenty five millimetre into twenty five millimetre into five millimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. ( Two Numbers) 75mmx75mm (seventy five millimetre into seventy five millimetre) of 12 SWG ( twelve standard wire gauge) sheet tubes posts duly embedded in cement concrete M-15 ( M fifteen) grade nominal mix 1:2.5:5 (One cement: two and half sand: five graded or crushed stone aggregate 40mm (Forty milimetre) grade blocks of 450mmx450mmx600mm ( four hundred fifty millimetre into four hundred fifty millimetre into six hundred millimetre), 600mm ( six hundred millimetre) below ground level. The top most diamond plate will be welded to middle plate by 47mmx47mm ( forty seven millimetre into forty seven millimetre) of 12 SWG ( twelve standard wire gauge) steel plate tube. All MS will be stove enameled on both sides. Lettering and printing, arrows, borders etcetra will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and M.O.R.D. technical specifications section 1700 including carriage of materials to various location through all modes of transportation within all leads, lifts and other incidental and as per direction of Engineer-In-Charge. The rate is including octroi,royality,Mlakana,toll tax, GST or other taxes imposed by the government.

Providing and erecting Reinforced cement concrete mechanically mixed and vibrated grade M-15 (M-fifteen) in 5th (fifth) kilometer stone (precast) of standard design as per IRC:8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 Including hauling of materials within all leads, lifts and other incidental or as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government

Providing and erecting Reinforced cement concrete mechanically mixed and vibrated grade M-15 (M-fifteen) in ordinary kilometer stone (precast) of standard design as per IRC:8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 Including hauling of materials within all leads, lifts and other incidental or as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government

Providing and erecting Reinforced cement concrete mechanically mixed and vibrated grade M-15 (M-fifteen) in 200 mtr ( two hundred metre) stone (precast) of standard design as per IRC:8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 Including hauling of materials within all leads, lifts and other incidental or as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 600 mm (six hundred millmetre) equilateral triangular board as per IRC:67 made of 1.5 mm (one point five millimeter) thick MS Sheet duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimeter) width and required letters and figures with reflective tape engineering grade of required shade and colour supported and welded on 47mmx47mm (Forty seven millimeter into forty seven millimeter) of 12 SWG sheet square tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-fifteen) grade cement concrete 450x450x600 mm, (four hundred fifty into four hundred fifty into six hundred millimeter) 600mm (six hundred millimeter) below ground level as per drawing and MORD technical specification section 1700 including painting angle iron post with primer and two coats of epoxy paint and as per direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidental.The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and erecting direction and place identification semi-reflective sign boards upto 0.90 sqm (zero point nine zero) square metre size board, as per IRC-67 made of 2mm (two millimeter) thick MS sheets duly stove enamelled paint in white colour in front and gray colour on back with red reflective border of 70mm (seventy millimetre) width and required message, letters and figures with reflective tape engineering grade as per clause 1701 of MORD for rural roads of required shade and colour supported and welded on 47mm x 47mm of 12 SWG (forty seven into forty seven millimetre of tewlve standard wire gauge) sheet square tube of 3050mm (three thousand fifty millimetre) height duly strengthened by 25mm x 5mm (twenty five millimetre into five millimetre) mild steel flat iron on edges on back firmly fixed to the ground by mean of properly designed foundation with M-15 grade (M-fifteen grade) cement concrete 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeter) , 600mm ( six hundred millimeter) below ground level as per drawings and MORD technical specification section 1700, including painting angle iron post with primes and two coats of Epoxy paint as per specification and direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and erecting direction and place identification semi-reflective sign boards more than 0.90 sqm (zero point nine zero) square metre size board, as per IRC-67 made of 2mm (two millimeter) thick MS sheets duly stove enamelled paint in white colour in front and gray colour on back with red reflective border of 70mm (seventy millimetre) width and required message, letters and figures with reflective tape engineering grade as per clause 1701 of MORD for rural roads of required shade and colour supported and welded on 47mm x 47mm of 12 SWG (forty seven into forty seven millimetre of tewlve standard wire gauge) sheet square tube of 3050mm (three thousand fifty millimetre) height duly strengthened by 25mm x 5mm (twenty five millimetre into five millimetre) mild steel flat iron on edges on back firmly fixed to the ground by mean of properly designed foundation with M-15 grade (M-fifteen grade) cement concrete 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeter) , 600mm ( six hundred millimeter) below ground level as per drawings and MORD technical specification section 1700, including painting angle iron post with primes and two coats of Epoxy paint as per specification and direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm (eighty to one hundred) centimetre high above ground level, painted black and white in 15 cm (fifteen centimetre) wide strips, fitted with 80 x 100 mm (eighty into one hundred) millimetre rectangular or 75 mm ( seventy five millimetre) dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 as per dawings and MORTH Technical specification section 800 and as per the entire satisfaction and directions of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,GST or any other taxes imposed by the Government.

Routine maintenance after completion of construction work including hauling /carriage of all labour equipments and materials to various locations of site through all modes of transportation in all leads and lifts to the entire satisfaction of Engineer in charge.

For First Year

For Second Year

For third Year

For fourth year

For fifth year

M/s Kamala Enterprises

M/S YUDHBIR SINGH RAJPUT&SONS