SPECIAL REPAIR REPLACEMENT OF LT PANELS BUS BAR PANEL AND RE-ROUTING

Amount

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth for laying cable/poles/struts/stays etc. and getting out, in hard/dense soil complete all as specified and as directed for laying of under ground cable/pipe etc. complete all as specified and as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in soft/loose soil, complete, all as specified and directed.

Removing surplus excavated material to a distance not exc 50 meter and depositing where directed at level not exc 1.5m above the starting point, complete, all as specified and directed.

Material and labour for providing sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed. Note- Only punned thickness i.e 18 cm shall be measured & paid)

Supplying & laying bricks sub class 'B' old size for cable protection complete all as specified and directed.

Supply and laying in replacement 50 mm bore GI tubing light grade with all fittings laid across road or across PCC drains, along electric pole or floor/wall for cable protection complete all as specified and directed.

Supply, laying, jointing and testing of LT cable XLPE insulated, screened, PVC bedded, galvanized steel strip, armoured aluminum stranded conductor under ground electric cable 1100 volt grade, cross sectional area 16 Sqmm 4 core, laid in trenches/through pipe /poles etc. complete all as specified and directed.

Supply, laying, jointing and testing of LT cable XLPE insulated, screened, PVC bedded, galvanized steel strip, armoured aluminum stranded conductor under ground electric cable 1100 volt grade, cross sectional area 25 Sqmm 4 core, laid in trenches/through pipe /poles etc. complete all as specified and directed.

OUTGOING :- (a) MCCB 63 Amps, 4 pole , 415 volts, 25 KA breaking capacity adjustable type -02 Nos (b) MCB 20 Amps, SPN -01 Nos (c) MCB 10 Amps, Single Pole -02 Nos (d) Contactor 32 Amps MNX type -06 Nos (e) NO-NC push button for 20 HP motor - 04 Nos (f) Timer for star delta starter for 20 HP motor - 02 Nos (g) Phase Preventor - 02 Nos (g) Thermal Overload relay 35 Amps - 02 Nos (g) Timer for security light - 01 Nos (Note- LT panel foundation/platform shall be constructed as per manufacturer's instruction and cost deemed to be included in the quoted rate.

Taking down /up of old LT under ground cable and relaying / re-routing of the same making suitable joints in necessary at site including jointing material and accessories, complete all as specified and directed.

JAGAT POWER ELCTRICAL

VINYAK TRADERS