ADDITIONAL ALTERATION OF BOUNDARY WALL AND DRAINS AT COAST GUARD ENCLAVE KAKINADA UNDER GE(I) (CG) VIZAG

Amount

Demolition of re-inforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition).

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Brick Work with fly-ash Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar (1:6), complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water

M&L for rendering 15 mm thick built in cement mortar (1:4) in two layers (10mm + 5 mm) on fair faces of brick work or concrete surfaces on fair faces of brick work or concrete surfaces in cement mortar(1:4), mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instruction and finished the surface even and fair without using extra cement complete all as specified and directed. (NOTE : Water proofing compound shall be measured and paid separately as "Supply only").

Supply only liquid Water Proofing Compound, conforming to IS and as approved, complete all as specified.

M&L for broken glass coping on top of walls with cement mortar 1:3 including demolition of old glass coping complete all as specified and as directed.

M & L for Extra for forming fair finished drain or channel 55 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends

M & L for Providing, precast cement concrete Type B-1 (1:1.5:3) 20 mm aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc. (of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as speciied and as directed.

M & L for corrosive resistance TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M & L UPVC pipes 75 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors.

Demolition of cement concrete reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for Re-inforced cement concrete (1:1.5: 3) B-1 20 mm aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed.

Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.

M&L TMT bars 5mm dia and over upto and incl 10mm dia , cut to length bent to shape required including cranking bending spirally for hooping for walls hooking ends and binding with and including M.S wire ( annealed) not less than 0.9 mm dia as in stirrups, spacer and binders complete all as specified and as directed.

M&L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation & mass concrete complete all as specified and as directed.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. Note: Each line wire to be measured.

Dismantling wrought iron or mild steel work of any description not otherwise provided for wall

S & F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and as directed.

S& F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for Steel Concentrina coil of super profile of 600 mm dia stress in position hot dipped Galvanised steel wire coated with CLR ante corrosive paint making dimond shape with the help of dove tail clip (18 SWG) the coil fixed with razor wire at points were coil touch the bottom layer wire with help of hog rings(14 SWG) with and including all fittings like fastener, clips, luggs rings etc as approved by GE complete and all as specified and as directed .

M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots remove complete existing surface up to mother surface approved by GE than applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for preparing the new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for two coats of syntetic enamel paint over new steel surface of any description exc 10 cm in width or girth not otherwise described over one coat red oxzide primer incl preparation of surfaces complete all as specified and as directed.

M&L for two coats of syntetic enamel paint over old steel surface of any description exc 10 cm in width or girth not otherwise described complete all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and as directed.

R B RAJESH (BID ID -3269879)

ANJANA ENTERPRISES (BID ID -3270236)

SRI KRISHNA SAI ENTERPRISES (BID ID -3270787)

SSV CONSTRUCTIONS (BID ID -3270237)

P SRINIVASA RAO (BID ID -3269288)

srisampathassociates (BID ID -3269481)

N V S S K N SIVA PRASAD (BID ID -3268416)