Construction of Multi-Purpose Indoor Stadium Arena-2 in V.L.Puram Municipal Corporation Site, Rajamahendravaram, East Godavari, Andhra Pradesh. (2nd Call)

Construction of Indoor Stadium / Auditorium / Sports Complex / Public Assembly Building

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ‐ Ordinary soils‐Mechanical Means‐Up to 3 m depth.

Filling with carted gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

GRANULAR SUB BASE

Construction of Granular sub-base by providing HBG material confirming to Grading - V of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.

CEMENT CONCRETE (Cast-in-Situ)

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:4:8) NOMINAL MIX - (Below footings & Flooring bed)

ANTI-TERMITE TREATMENT

Providing Antitermite treatment as per IS 6313 (Part - 2) 2013 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6313 (Part-2) 2013 and other relevant approved specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry, Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums, plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding, overheads and contractor profit etc. complete for furnished item of work as per the approval of the Engineer-in-charge

RCC (Cast-in-Situ)

Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M 25(Weigh Batch) Centering with Steel upto 3.66

Supply and placing of the M-30 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS for:-Design Mix : M 25(Weigh Batch)

Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS for:-Design Mix : M 25(Weigh Batch)

Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for BEAMS & SLABS IN BUILDINGS for:-Design Mix : M 25(Weigh Batch)

Roof Slabs-150mm thick

Roof Slabs-175mm thick

STEEL REINFORCMENT

Supplying, fitting and placing HYSD (Fe 500/ tmt grade as per IS 1786-1985) bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes, on cost of all materials complete for finished item of work

BRICK WORK WITH COMMON BURNT CLAY F.P.S. (non modular)

Brick masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,cost of excluding seigniorage on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Brick Masonry in CM 1:6 (Country)

HALF BRICK WORK WITH COMMON BURNT CLAY F.P.S. (non modular)

Reinforced Brick Masonry for partition walls (115 mm thick) in CM (1:6) prop.(Cement:Sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding cost of seigniorage charges on all materials, scaffolding charges and all labour charges like mixing cement mortar, lift charges, curing, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501) for:-Reinforced Brick Masonry in CM 1:6 (Country)

CUBICAL PARTITION WITH HPL BOARD FOR TOILETS

Providing and fixing of HPL Sheets 12mm thick with Divider Height of 1820mm & door size of 600mm*1785mm of approved design with all Door Acessories ,a) SS Gravity hinges, b) SS Adjustable leg, c) SS Coat hook, d) SS Door knob, e) Aluminium U channel, f) SS Lockset with indicator, g) Aluminium anodised toprail, h) Aluminium Door Stopper Channel, i) Screws ( SS Grade - 304 ) & Wall Plugs j) Noise deafening tapes for grooves in doors & Pilasters. including all necessary fixing arrangement complete as per specification

12MM PLASTERING

Plastering 12mm thick for internal walls using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

20MM PLASTERING

Plastering with CM 2 coats for external wall, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Supplying and fixing Gyp board suspended regular single layer false ceiling (GS-MFSC-4.1 as per india Gypsum) using 12.50mm thick Gyp Board conforming to IS 2095-1982 fixing to Gyp steel GI perimeter channels of size 20mm x 27mm x 30mm (web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work / partion at 610mm c/c and suspending the frame work using intermediate channels (45mm x 15mm x 15mm x 0.90mm) form soffit at 1220mm c/c with ceiling angle (25mm x 10mm x 0.55mm) fixed with GI cleat and steel expansion fasteners & connecting clip to the cieling channels (withknurled web of 51.50mm x 26mm x 10.50mm x 0.55mm ) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.50 mm tapered edge Gypboard with 25 mm drywall screws at 230mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd., specification.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - including cost of access scaffolding for:-External Colouring - Providing Putty/ Texture to External walls

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Painting to new walls with 2 coats of Weather Proof Water Based acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade‐ 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls

Flooring with Tan brown Granite 18-20 mm thick upto 2.43M set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)

Flooring with polished shahabad stones 15 to 18mm mm thick set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, excluding seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work,

Half Rounding the edges of granite stone slabs of all thickness including polishing the same the same and over heads &contractor profit etc.

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)

Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush on line with plastering

Dadooing to walls withglazed red or white full body ceramic wall tiles of Size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent .

Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm).

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work. Ventilators: Fixed louvers 4'-0" x 2'-0" (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm

SCIENTIFIC DOORS

Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (basesteel as per IS 513 of 0.58 mm thick Dquality, galvanized as per IS 277 with Zinc of 120 GSM) coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermo setting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability /Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x58 mm x 1.2 mm thick,shutter section of 0.80mm thick galvanized steel sheet pressed (rollformed) for 46mm thick fully flush, double skin door shell seamjoints at stile edges, in-fill of honey comb kraft paper used to give there quired rigidity and effective acoustic insulation with 6” Tower bolt–1No., 6” Dhandles –2Nos.,10”Aldrop–1No.,ButtHinges– 3Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finish ed item of work for Single leaf Door

Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM).coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermo setting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability /Epoxy poly ester powder for powder coating paint thickness 50-60 microns (Dry filmthickness) outer frame section of 100 x58 mm x 1.2mm thick,shutter section of 0.80mm thick galvanized steel sheet presse d (rollformed) for 46mm thick fully flush, double skin door shell seamjoints at stile edges, in-fill of honey comb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt–2Nos.,6”D handles – 2 Nos.,10” Aldrop –1 No.,Butt Hinges – 6 Nos,Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Double leaf Door

Providing and Fixing Mild Steel, Structural Steel, I.e., Angles, Channels and I sections.of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings to be supplied at the time of execution of work, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welede joints, etc., and all operational, incidental, Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of Labour charges for fabricating and fixing/ erecting in position all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc complete for finished item of work.

Supplying and fixing stainless steel works such as railing, hand railing, grills etc., using Stainless Steel Tubes of 304 Grade as per the approved drawing including cost and conveyance of all materials to site, Labour charges for Fabrication of stainless steel works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish, overheads & contractors profit etc ., complete for finished item of work.

Painting to new iron works with 2 coats of synthetic enamel paint of approved brand and shade over 1 coat of red oxide primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for:-Painting to Iron work - Synthetic enamel paint to New Iron Work - 2 coats + 1 coat Iron primer

Torsion spring activated Tip-Up with armrest HDPE BLOW MOULDING plastic stadium seat with stand made up of aluminum pressure die casting with powder coated finished, corrosion resistant aluminum frame. The molded seat shall be produced from HDPE (High Density Poly Ethylene), formulated with ultra violet light stabilization and anti-static inhibitors. No screws, bolts or mechanical fixings shall be used to attach the plastic seating components to the steelwork. The seat shall be capable of being sprung back to the fully upright position for improved stadium access and cleaning. The seat shall feature a near silent tip-up mechanism. The seat shall incorporate a full lower back to eliminate interference from the feet of the people behind. The seat shall be guaranteed to maintain its original colour with minimal fading for a three-year warranty period. The seat shall feature an ergonomic contour to provide a balance of patron comfort, performance and flexibility, whilst maintaining its full strength. The seats and the backrest fit perfectly and protected from dirt and dust. The Tip-Up mechanism includes a rubber shock absorber which prevents the seats hitting the backrest. Seats shall be installed individually on tier as per manufacturer specifications. Seat & Back made up of HDPE Blow moulded Plastic material with minimum wall thickness should be 2.5 to 4.5 mm. (Tolerance +/- 0.5 mm),The HDPE material must be UV resisted. The chair should have complied to EN; 12727;2016 standard, Xenon Arc Exposure (ISO-4892-2:2013 Cycle 1), The tip up mechanism should be made up of CR sheet metal press parts of 1.6 mm thick, bent to seat contour shape., Tip up rod should be of 16 mm sq. x 1.6 mm thk, with torsion spring for tip up feature. Stand should be made up of Aluminum Alloy pressure die casting material. Minimum weight of one stand shall be of less than 2.200 kgs. (±100gms) Stand should be powder coated finished. (As per customer’s colour choice) with 50 microns. Fitting should be with M 8 x 70 mm anchor fasteners with chemicals bonding properties. Stainless Steel Metal & row numbering to be provided for easy traceability. Row indicator is a must on Aisle side for traceability of rows. Size: 510 ctc (Centre to centre) Optional: HDPE handle is provided in case customer opt to go for it. Weight of Seat:Total weight : 7.360 Kgs. Says 7.5 Kgs on average.

Self Supporting System

A) Supply, fabrication, on-site roll-forming, curving, installation, and fixing of self-supported trussless arch roofing system using high-tensile Galvalume steel sheets (aluminium-zinc alloy coated steel, minimum AZ 150 coating mass as per relevant standards) of 1.50 mm total coated thickness (TCT), cold roll-formed at site into standing seam type panels with approximately 914 mm effective cover width, mechanically seamed (double-lock / snap-lock standing seam) to create a fully continuous, watertight, non-punctured roofing membrane. The system shall be executed in single-bay clear-span configuration for a building of 28.00 m clear span, 60.00 m length, with arched profile having an approximate developed arch length of 31.35 m and rise (crown height) of 16.31 m, forming a true self-supporting structural roof shell without any intermediate trusses, rafters, purlins, or secondary structural members. Scope includes: Detailed structural design verification / approval as per relevant Indian Standards (IS 875 Parts 1–5 for loads, IS 800 / IS 801 for cold-formed steel design, IS 277 / ASTM A792 for Galvalume material, and other applicable codes). Mobilization of mobile roll-forming machine, curving equipment, and seaming tools to site. On-site cold roll-forming of continuous-length panels from coil stock, precision curving to required arch radius/profile, mechanical double seaming for watertight joints. Fixing to RCC/steel end supports/ring beams using purpose-designed concealed anchor clips, galvanized / stainless steel anchor plates, high-strength self-drilling / self-tapping fasteners (where required at ends only), EPDM / butyl rubber sealants/gaskets, and compatible flashings/ridge closures. Provision of all necessary accessories including eaves gutters/trim, ridge cap/flashing, valley flashing (if applicable), ventilation provisions (if specified), end-wall closures, and weatherproof sealants throughout. Complete erection using scaffolding, staging, safety measures, lifting/handling equipment, skilled labour, and supervision. All transportation of coils/materials, machinery, tools, and consumables to site. Surface preparation, cleaning, and quality checks during forming/seaming/installation to ensure zero leakage, proper alignment, and structural integrity. Final cleaning, debris removal, and handover of the complete watertight, self-supporting trussless arch roof system as per approved shop drawings, structural calculations, and relevant IS codes / manufacturer guidelines. The work shall be executed to achieve full structural performance (load-bearing capacity for dead, live, wind, seismic loads), durability, corrosion resistance, and 100% leak-proof performance without any secondary supports in the span.

B) Supply and application of Fibre Reinforced Polymer (FRP) insulation coating of minimum 2.0 mm finished thickness over the self-supported trussless Galvalume arch roofing system, to provide thermal insulation, weatherproofing, and corrosion protection. Scope includes: Surface preparation: high-pressure cleaning, degreasing, drying, and priming with compatible etch/adhesion primer for Galvalume substrate. Multi-layer hand-layup or spray-up application of UV-stabilized polyester resin reinforced with chopped strand mat (minimum 300–450 gsm total glass), consolidated to eliminate voids, and finished with resin-rich UV-resistant topcoat. Reinforcement at edges, penetrations, ridges, eaves, and junctions; sealing with compatible sealants. All materials (resin, hardener, glass fibre, primer) complying with relevant IS/ASTM standards and manufacturer specifications. Complete execution including skilled labour, tools, scaffolding for safe access on curved roof, quality checks (thickness, adhesion, visual inspection), curing under protection, debris removal, and handover. Work carried out as per manufacturer’s guidelines, approved method statement, and directions of the Engineer-in-Charge. The applied FRP system shall form a monolithic, seamless, durable, watertight, and thermally insulating membrane fully compatible with the underlying roofing

Elevation Works

Supplying and fixing aluminium composite cladding with skin material 0.25 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including all scaffolding and labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, if any, ACP Cladding - 3 mm thk

Providing and fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72 mm and the glass holding section made of 304 grade stainless steel of 0.58 mm thick galvanised steel section as stiffeners inside the colour coated steel powder coated sections as per the design requirement & calculations to suit wind pressures as given in IS: 875, the primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick and the vertical section of 50 mm x 99 mm x 0.72 mm, 33 mm x 56 mm x 0.72 mm for frame horizontal section, stiffener section of 47 mm x 97 mm x 1 mm, cover profiles sections of 20 mm x 58 mm x 0.58 mm, glass holding section of 37 mm x 37 mm & 37 mm x 18 mm including fixing 5mm thick Ocean Blue reflective glass, brackets made of CRCA powder coated/Electroplated to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement and gasket made of Ethyl Propylene Diamine Monomer, U.V. resistant silicon sealant including fixing in concrete/masonry wall with self- expanding cap & screws inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and fixing charges complete for finished item of work.

SPORTS COMPONENTS

Supply & Installation of BADMINTON WORLD FEDERATION (BWF), Grade 1 - International Elite approved Wooden Sports flooring system with Canadian Hard maple wood System Thickness (Air-cush System) - 85mm that should be compliance with the Area elastic with total thickness of 85 mm comprising of 20mm Top Solid Wood followed by 45mm solid wood runner and 19mm Power Rubber Pad. Product top finish to have square Edge & Prefinished with sanding. Structure of Product: 21mm thick Canadian Maple Hardwood sports flooring, 19mm thick EPDM air-cushioned pads, 45mm thick Pine wood runners, followed by . Runner size – 45mm thick x 70mm width x RL (Random Length). Rubber Pad Size – 19mm thick through the wings at 350mm x 350mm. Base : Concrete Certificate – BWF Approved ,WSF Approved, & FIBA Tested

Supply and Installation of European Origin Heterogeneous Sports Vinyl Flooring 6.7mm Thickness with sheet width not less than 2.0 metre width jointed with seamless thermo welding laid with Suitable Premium adhesive @ 0.25kg/m2 over suitable subbase, conforming to manufacturer's specifications including line marking for the specific sports area (Basketball Court, Badminton Court, Tennis Court & Gymnasium etc.,) with 2C polyurethane/ epoxy marker paint of approved quality and as directed by the Engineer-in-charge. The sports flooring shall be (i) Bacterial resistant, (ii) Thermo welding of joints of flooring shall be by heat process to make seamless floor finish, (iii) The joints in the flooring shall be sealed by using a PVC welding bar of matching colour using hot air gun. The Product shall be Floor Score, FIBA, BWF & IHF Certified, its BWF Certification shall be of Grade-1 (BWF International Elite). Product should have been installed in Top institute of India i.e. IIT, NIT or equivalent. Technical Standards of Product are as per following; Surface Finish : XPUR scuff-resistant surface, Backing: Combined closed cell foam, Weight: 3.6 kg/m2 as per EN-ISO-23997 Standards, Roll Size: 2 Meter Width x 15 Meter Length ± 1%, Product Specification should fall under EN 14904 (category P1), Impact sound insulation: 22 dB as per EN ISO717-2 Standards Thermal resistance: 0.07 m2-K/W, Reaction to fire: C-fls1, Formaldehyde emission: No formaldehyde , Pentachlorophenol: No pentachlorophenol, Friction: 80-110 as per EN 13036-4 Standards, Shock absorption: >25% EN-14808 , Vertical deformation: 1.08mm EN 14809, Ball rebound: 97% as per EN 12235, Specular gloss: < 30 as per EN 2813, Dimensional stability: ± 0.2% EN ISO 23999, Indentation resistance: <0.5mm EN 1516, Resistance to rolling load: 1500 N as per EN 1569, Colour fastness: 6 ISO 105 B02, Chemical resistance: no change EN ISO 26987, Abrasion resistance: < 250 mg/1000cycles as per EN ISO 5470-1 Standards and product is Solvent and heavy metal free.

Supply and Installation of European Origin Heterogeneous Sports Vinyl Flooring 6.7mm Thickness with sheet width not less than 2.0 metre width jointed with seamless thermo welding laid with Suitable Premium adhesive @ 0.25kg/m2 over suitable subbase, conforming to manufacturer's specifications including line marking for the specific sports area (Basketball Court, Badminton Court, Tennis Court & Gymnasium etc.,) with 2C polyurethane/ epoxy marker paint of approved quality and as directed by the Engineer-in-charge. The sports flooring shall be (i) Bacterial resistant, (ii) Thermo welding of joints of flooring shall be by heat process to make seamless floor finish, (iii) The joints in the flooring shall be sealed by using a PVC welding bar of matching colour using hot air gun. The Product shall be Floor Score, FIBA, BWF & IHF Certified, its BWF Certification shall be of Grade-1 (BWF International Elite). Product should have been installed in Top institute of India i.e. IIT, NIT or equivalent. Technical Standards of Product are as per following; Surface Finish : XPUR scuff-resistant surface, Backing: Combined closed cell foam, Weight: 3.6 kg/m2 as per EN-ISO-23997 Standards, Roll Size: 2 Meter Width x 15 Meter Length ± 1%, Product Specification should fall under EN 14904 (category P1), Impact sound insulation: 22 dB as per EN ISO717-2 Standards Thermal resistance: 0.07 m2-K/W, Reaction to fire: C-fls1, Formaldehyde emission: No formaldehyde , Pentachlorophenol: No pentachlorophenol, Friction: 80-110 as per EN 13036-4 Standards, Shock absorption: >25% EN-14808 , Vertical deformation: 1.08mm EN 14809, Ball rebound: 97% as per EN 12235, Specular gloss: < 30 as per EN 2813, Dimensional stability: ± 0.2% EN ISO 23999, Indentation resistance: <0.5mm EN 1516, Resistance to rolling load: 1500 N as per EN 1569, Colour fastness: 6 ISO 105 B02, Chemical resistance: no change EN ISO 26987, Abrasion resistance: < 250 mg/1000cycles as per EN ISO 5470-1 Standards and product is Solvent and heavy metal free.

WEIGHT TRAINING ROOM

Supply and Installation of European Origin Heterogeneous Sports Vinyl Flooring 6.7mm Thickness with sheet width not less than 2.0 metre width jointed with seamless thermo welding laid with Suitable Premium adhesive @ 0.25kg/m2 over suitable subbase, conforming to manufacturer's specifications including line marking for the specific sports area (Basketball Court, Badminton Court, Tennis Court & Gymnasium etc.,) with 2C polyurethane/ epoxy marker paint of approved quality and as directed by the Engineer-in-charge. The sports flooring shall be (i) Bacterial resistant, (ii) Thermo welding of joints of flooring shall be by heat process to make seamless floor finish, (iii) The joints in the flooring shall be sealed by using a PVC welding bar of matching colour using hot air gun. The Product shall be Floor Score, FIBA, BWF & IHF Certified, its BWF Certification shall be of Grade-1 (BWF International Elite). Product should have been installed in Top institute of India i.e. IIT, NIT or equivalent. Technical Standards of Product are as per following; Surface Finish : XPUR scuff-resistant surface, Backing: Combined closed cell foam, Weight: 3.6 kg/m2 as per EN-ISO-23997 Standards, Roll Size: 2 Meter Width x 15 Meter Length ± 1%, Product Specification should fall under EN 14904 (category P1), Impact sound insulation: 22 dB as per EN ISO717-2 Standards Thermal resistance: 0.07 m2-K/W, Reaction to fire: C-fls1, Formaldehyde emission: No formaldehyde , Pentachlorophenol: No pentachlorophenol, Friction: 80-110 as per EN 13036-4 Standards, Shock absorption: >25% EN-14808 , Vertical deformation: 1.08mm EN 14809, Ball rebound: 97% as per EN 12235, Specular gloss: < 30 as per EN 2813, Dimensional stability: ± 0.2% EN ISO 23999, Indentation resistance: <0.5mm EN 1516, Resistance to rolling load: 1500 N as per EN 1569, Colour fastness: 6 ISO 105 B02, Chemical resistance: no change EN ISO 26987, Abrasion resistance: < 250 mg/1000cycles as per EN ISO 5470-1 Standards and product is Solvent and heavy metal free.

BADMINTON POLES - MOVEABLE

Moveable Type & having Loose Extra Weight *Having Provision of Tray System to Keep Extra Loose Weight or Fill it Site *Easy Movement on 2 PU Wheel. *Made of 40mm Round / Square MS Pipe *Epoxy Painted *Garware Tournament quality Net - UV Treated.

BADMINTON COURT MAT - BWF Certified

Supply and Installation of PVC Mat (BWF Approved) Thickness: 7mm Weight:3.4kg/m Width of sheet: 1.8m Length of sheet: 15m Shock absorption: 19.2% Vertical deformation: 0.4mm Energy return: ≥0.31m/s Sliding coefficient: 80-110 Ball bounce: ≥90 Chemical resistance: Good Abrasion resistance: ≤350mg Reaction to fire: Cfl -F Formaldehyde emission: ClassE1 Resistance to wear: 54mg Impact resistance: 0.12mm Indentation resistance: 0.26mm Rolling Load resistance:≥1500N Brightness: ≤30% Surface complex: 100%PVC Friction: 10

VOLLEYBALL - MOVEABLE POLES

*Made with branded high-quality MS Steel Pipe in 8 CM x 8 CM Square Pipe *Internal Dimensions : 2 Mtr x 3 Mtr *Epoxy Painted. *Rust & Corrosion Free *Zero Vibration *The Poles Comprise of wheels which make it easy to move *Handball Net Local (Garware is not manufacturing the Handball net)

BASKETBALL GOAL POST - MOVEABLE

Having Tray System to fill Extra Weight at Site *Pole will Made 17 CM (6") Round Pipe & Having Channel System *Available in 2.2 Mtr Extn. *Acrylic Board Thickness - 20 MM (Imported Quality), Size of Board - 180cm x 105cm *Having Tray System to Fill Extra Weight in Form of Aggregates at Site *Dunking Ring *Quality Net *Epoxy Painted

HVAC WORKS WITH VARIABLE REFRIGERANT VOLUME / FLOW (VRV/F) SYSTEM

Supply of Air cooled VRV / VRF Air Conditioning system of having high COP complete with indoor and outdoor units duly charged with refrigerant R-410A and oil (first charge) suitable for cooling with individual controller, (suitable for 415 +/- 10% for outdoor and 230 +/- 5% for indoor units) and complete with all accessories, fittings etc. The units shall be BMS Compatible. Outdoor Units shall be fully inverter system complete with 100% scroll/rotary compressor and drive arrangement, initial charge of refrigerant (R-410A),refrigerant piping, drier, sight glass, dual pressure cutout all housed and supported properly in cabinet, air cooled condenser & its controller for following capacities. The VRV system shall be cooling only system. Makes: As per list of recommended brands as category I. Type of Compressor: Hermitic sealed Inverter Scroll/Twin Rotary ODU should deliver the required capacity at the ambient conditions of the place as per ISHRAE Standards. The System should be highly energy efficient, and COP shall not be less than 3.7. The outdoor units shall be suitable for operation between 5 and 53 deg C in cooling mode.

Lifting, shifting, positioning, Installation and testing of the ODUs including all accessories with Vibration Isolators for ODUs etc., complete

Supply and Installation of Ref Nets for Double ODU connections

Supply and Installation of Ref Nets for Triple ODU connections

Supply and Installation of Multi Connection Joint / Ref Nets for IDUs

AIR HANDLING UNITS

Supply / Installation / Testing / commissioning Of Floor Mounted Horizontal / Ceiling Suspended Integrated Air Handling Units of following specifications:

Supply, Installation, Testing and Commissioning of double skin horizontal floor mounted air handling unit of recirculation type having mixing box with fresh air & return air manually operated AL dampers. Fresh air inlet should have back draft dampers along with AL manually operated fresh air dampers. Units shall be with a minimum of 80mm GI base channel. The panel thickness should be 46+/-2mm having thermal break AL profile. Outer skin of the unit should be 0.6mm pre-coated GI sheet & Inner skin should be 0.8mm AL. All internal blank off should be GI. Filter section with 90% efficiency down to 10-micron pre-filter box type followed by 95% efficiency down to 5-micron Microvee filter in a separate filter frame. The cooling coil section should be 6 or 8 Row Deep Direct Expansion intertwining cooling coil compatible for Mitsubishi /DAIKIN/Toshiba/O General/ Blue star/Hitachi/Carrier outdoor unit. Fin thickness should be 0.15mm & fin spacing should be 12 FPI. Coil casing should be GI & fin shall be with standard fin material. Coil shall be 18G SS-304 drain pan with 13mm thick closed cell nitrile rubber insulations. Unit shall be ultraviolet lamp to kill germs/fungus. The heater section should be with 4kW electric strip heater in 2 banks. The fan section should be SISW direct driven plug fan with a minimum efficiency of 65%. Motors should be IE-2, TEFC squirrel cage induction type with IP-55 protection, 415V, 3Phase & 50Hz. The motor drive should be VFD. VFD drive should be included in AHU supply. Fan should be housed over the spring isolator. Units should be supplied with manually operated AL dampers. The AHU package should include Electronic expansion valves compatible to condensing units, Temperature sensor and controller compatible to inverter drive, communication cables from AHU to condensing unit etc., including cost of all accessories and all labour charges, transportation etc., complete. Makes: As per list of recommended brands.

35 TR/14000 cfm- Arena seating

12.5 TR/5000 cfm- Theatre

Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls and duly wired, thermostatic control. Makes: As per list of recommended brands as category I.- High Static Duct Units

7.5 TR/3000 cfm

Lifting Shifting, Positioning, Installation Testing and commissioning of the following indoor units with including all required accessories etc complete.,- Type Of Units : High Static Duct Units

5.5 TR to 8.0 TR

Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls and duly wired, thermostatic control. Makes: As per list of recommended brands as category I.- Round flow/4 way Cassette units

Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls and duly wired, thermostatic control. Makes: As per list of recommended brands as category I.-Hi Wall type units

Lifting Shifting, Positioning, Installation Testing and commissioning of the following indoor units with including all required accessories etc complete.,- Type Of Units : Hi Wall Units

1.0 TR to 2.0 TR

ELECTRICAL INSTALLATION

Location : Respective AHU Room

Supply / Installation / Testing / commissioning Of below items

a. 40 Amps 4P MCB --- 01 sets

b. Multifunction meter to read ammeter (0 - 40) Amp, Voltmeter (0-500)V, KW and KWH, frequency , power factor, reactive power, A set of CT's, RYB LED type phase indication lights -- 01 set.

Electrolytic grade (E 91 E), 63 A capacity TPN aluminium bus bar , PVC heat shrunk insulated, supported on DMC/SMC having fault level of 50 KA for 1 second.

a. 16A 4P MCB with fully automatic DOL starter with built in single phasing preventer, overload relay & 0-30 seconds adjustable timer, digital type ammeter with CT's & selector switch for 3 HP supply air fan motor of AHUs,a set of ON & OFF indication lights & START- STOP push buttons---02 sets (1W + 1SB).

b. Control circuit consisting of automatic changeover including contactors of suitable rating & timer for operating one supply & one exhaust blower at a time (Timer shall provide necessary output for BMS integration). Auto-Manual type selector switch to facilitate auto start of AHU after restoration of power.

c. Auto-Manual type selector switch to facilitate auto start of AHUs after restoration of power -- 02 sets (1W + 1SB).

d. Control wiring & safety circuit as required with Start-Stop PB's stayput or lockable type and LED type 'ON' 'OFF' indication lights.

Electrical panel as described above.

Supply / Installation / Testing / commissioning Of below items

Location : Close to Units

a. 63A TP MCB for 7.5/10 HP motor - 01 Set.

b. RYB LED type indication lights --- 01 Set.

c. Fully automatic Star Delta starter with builtin single phasing preventor, over load relay for 7.5/10 HP motor --- 01 Set.

d. Auto-Manual type selector switch to facilitate auto start of AHU after restoration of power-01 set.

e. Control wiring & safety circuit as required with Start-Stop PB's stayput or lockable type and LED type 'ON' 'OFF' indication lights.

Electrical panels as described above.

1. The fabricator shall have the busbar chamber tested & approved at CPRI for 50 KA/1 Sec.

2. The outgoing starter feeders for ventilation fans shall be provided with push buttons, indicating lamps for status indication.

3. Proper isolation switches to be provided near air supply and extract fans.

4. Bimetal overload relay for all the starters shall have built-in single phasing prevention feature.

5. Electrical interlocking wiring shall be provided as per system requirement.

6. Power cabling/wiring with necessary earthing from source to each panel shall be provided by other agencies.

7. All Electrical Panels shall be compatible with BMS and necessary provisions to be made in each panel.

AHU STARTER PANEL

'VFD provision' with bypass STAR/DELTA STARTER with Overload,Single phasing, Under voltage and overvoltage, phase reverse protection with necessary internal wiring. Starter should be compatible for BMS also with necessary inputs and outputs provisions, power and control wiring should be carried out as per IS standards suitable for current ranging from (0--16)Ampere.VFD cab have Single phase input also

Supplying, installing, testing and commissioning of AHU Kits of required and suitable capacity(HP) connection with Electronics Expansion Valve controlled by EEV controller and accessories etc.

Supply, installation, testing & commissioning of Stand alone System controller with Display for controlling the indoor & outdoor units from a Remote place for all the circuits.

Supply, installation and testing of Refrigerant Piping consisting of copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings, Liquid Line Piping & Fittings, with class "O" nitrile rubber Insulation with finish as required. The piping to be mounted & supported properly with suitable size of clamp, M.S. hanger, tray etc., as required at site Makes: As per list of recommended brands.

The insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm. The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm.

Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations

Supply, installation, and testing of UPVC Drain Piping with 6mm Nitrile Rubber class "O" Insulation covered with interwoven glass cloth protection. Necessary pipe fittings (including enlarger, bends, T-Joints etc) has to be considered to connect the UPVC drain pipe to cast iron floor trap.

Supply and transportation of R 410A Gas for the system.

Providing Pressure testing of entire system with Nitrogen and vacuuming nitrogen for all indoor and outdoor units. The pressure testing shall be done as per OEM recommendation.

Supply &Fixing of out door piping with weather proof glass cloth which will act as a Uv resistant as well as mechanical resistant.

Supply, laying and commissioning of required size Power cable with 4C x 1.5 sqmm for indoor units

Supply, laying and commissioning of required size of Communication cable with 2 x 1.5 sq.mm and with including all accessories and PVC Conduit.

Supplying, installing, testing and commissioning of GSS Tray type support covered with GI sheet on top for all exposed copper pipes running on terrace/balcony. Considered 200mm/300 dia /Required width

AIR DISTRIBUTION SYSTEM:

SUPPLY AIR PLENUMS FOR FM AHUs Supply, Installation and Testing of factory fabricated double skin supply air plenum to be installed over AHUs. Construction of plenum shall be similar to AHU Panels, having adequate provisions for Main Duct connections. Size of plenums shall be as shown in the construction shop drawings submitted by Contractor/ manufacturer.

Supply, installation, testing& commissioning of GSS Ducting with required angle flanges & installation materials such as heavy duty supports by anchor fasteners etc as required asper IS 655 /SMACNA Standards. Makes: As per list of recommended brands

26G (0.5 mm thick)

24G (0.6 mm thick)

22G (0.8 mm thick)

20G (1.0 mm thick)

18G (1.2 mm thick)

Supply &Fixing of Duct Thermal Insulation applied outside of the duct work with All. backed Closed cell nitrile/ Cross linked foam duly fixed with adhesive and tapes- 13 mm Thick

Supply & Fixing of Duct Acoustic Insulation applied inside of the duct work with All. backed Open cell nitrile duly fixed with adhesive and tapes- 10/15 mm Thick

Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610mm x 610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications.

DAMPERS, GRILLES & DIFFUSERS:

Supply, Erection and Testing of GI Opposed blade Volume control dampers made out of 18G frame and 20G blades

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.

Motarised Fire Damper with actuator

Supply, Erection of Fresh air louver with extruded aluminum grill with SS wire mesh and GI volume control damper with 20 micron filters

Supply and Installation of GI Fusible link Fire dampers 500 mm long with sleeve as per UL 555 Standard, Minimum width of damper shall be 225 mm.

Supply and Installation of GI backdraft dampers as per UL 555 Standard,

Supply, installation and testing of Canvas connection for the Treated Fresh Air units to the duct

Supply, erection, testing and commissioning of Fresh air intake GI louvers with bird screen as per standard specifications.

Supply, Installation, Testing and commissioning of extruded Aluminum powder coated grills/ diffusers for supply air with removable core type with collar damper

Supply, Installation, Testing and commissioning of extruded Aluminum powder coated grills/ diffusers for return air with removable core type without collar damper.

Supply, Installation, Testing and Commissioning of GI. Collar dampers for Supply/return air.

Supplying, installing, testing and commissioning of SP-For Fresh Air Cabinet FAN SECTION -DIDW of double skin construction as per specifications, each complete with squirrel cage induction motor (mounted internally), centrifugal fan belt drive and vibrations isolators, base, drive arrangement, flexible canvass connection inside and for duct connection and all other accessories as required and as called for in the drawings. Motors shall be suitable for 415 ± 10% volts, 50 cycles, 3 phase or 220-volt single phase 50 cycles AC supply (as per manufacturer specification) for a static pressure as indicated. In addition, all supply fans (SF) shall be provided with 50mm thick prefilter. Fan section shall be suitable for Floor Mounted outdoor application as well as ceiling suspended indoor applications with suitable capacity of starter with Four Pole MCB etc., and other protective devices of approved brands within MS enclosure etc., as per specification including transportation to site, all mounting arrangements like brackets etc., and cost of all accessories and all labour charges complete.

15000 CFM / 30mm

25000 CFM / 30mm

EXHAUST SYSTEM FOR TOILETS

Extract Air Fans

Supply, Installation, Testing and Commissioning of Centrifugal fan for toilet exhaust with (50mm SPWG if required) with weather proof casing as per specification with all accessories complete of the following Capacities. Installation shall include all required power wiring from an adjacent disconnect switch weatherproof cables, galvanized rigid metal conduits, etc., complete. All fans are centrifugal and roof mounted and wall fans are wall mounted.

Supply, Installation, Testing and Commissioning of factory fabricated GSS Toilet Ventilation Ducting ( with minimum 120 Gsm /Sqm zinc coating) as per SMACNA/DW standards.

26G (0.5 mm thick)

24G (0.6 mm thick)

22G (0.8 mm thick)

Supply, Installation, Testing and Commissioning of Extruded Al. Powder coated Diffusers for Return air in toilets

EXTERNAL ELECTRICAL WORKS

Main Panel Supply, fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat.. Fuses shall be provided for Control purposes (All Panels shall be extendable type ACB MAKE: Legrand(DMX3) / Schneider(NW) / / L&T(UPOWER OMEGA) / ABB(EMAX PR122) MCCB MAKE: LEGRAND(DPX3), , SCHNEIDER ( COMPACT NSX) , L&T ( DSINE), ABB(TMAX)

Supply and fixing of Air Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection with display and 20 faults History backup with BMS compatible communication ports. 1000A 75KA 4Pole ACB - 1 Nos, Multi function meter with CT 1000/5A , class I - 2 Nos

Supply and fixing of MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity… with thermal magnetic release panel mounted. 800A,3P,50KA MCCB-3Nos,

Supply and fixing of MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity… with thermal magnetic release panel mounted. 400A,3P,50KA MCCB-1Nos,

250A,3P,50KA MCCB-3Nos,

125A,3P,25KA MCCB-3Nos,

63A,3P,25KA MCCB-1Nos,

EMERGENCY PANEL Supply, fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat.. Fuses shall be provided for Control purposes (All Panels shall be extendable type MCCB MAKE: L&T ( DSINE), ABB(TMAX)

Supply Installation Testing and commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be abricated from CPRI approved fabricator).

Supply and fixing of MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity… with thermal magnetic release panel mounted. 125A 35KA 4Pole MCCB - 1 Nos, Multi function meter with CT 125/5A , class I

63A 10KA 4P MCB - 10 Nos

LED Phase Indication lamps, 800A Aluminium busbars of reuqired size. Dual source meter for EB & DB metering

LIGHT POWER PANEL Supply, fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat.. Fuses shall be provided for Control purposes (All Panels shall be extendable type MCCB MAKE: L&T ( DSINE), ABB(TMAX)

Supply Installation Testing and commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be abricated from CPRI approved fabricator).

Supply and fixing of MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity… with thermal magnetic release panel mounted. 125A 35KA 4Pole MCCB - 1Nos, Multi function meter with CT 125/5A , class I EB SUPPLY AND DG SUPPLY

63A 16KA 4P MCCB - 10Nos

LED Phase Indication lamps, 200A Aluminium busbars of reuqired size. Dual source meter for EB & DB metering

FEEDER PILLAR PANEL Supply, fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat.. Fuses shall be provided for Control purposes (All Panels shall be extendable type MCCB MAKE: L&T ( DSINE), ABB(TMAX)

Supply and fixing of MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity… with thermal magnetic release panel mounted. 125A 25KA 4Pole MCCB - 1 Nos, Multi function meter with CT 125/5A , class I

63A 16KA 4P MCCB - 1 Nos

40A -63A10KA 3P MCB - 6 Nos

32A 10KA 4P MCB - 4 Nos

TIMER & CONTACTOR

LED Phase Indication lamps, 200A Aluminium busbars of reuqired size. Dual source meter for EB & DB metering

CABLES & TERMINATIONS

Supply and laying of the following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) 1554-1, including laying in existing cable trench as per specifications etc complete as required. [Makes: Polycab / RPG / Finolex / Havells]

3.5 Core 400 Sqmm alluminium cable

3.5 Core 300 Sqmm alluminium cable

3.5 Core 240 Sqmm alluminium cable

3.5 Core185 Sqmm alluminium cable

3.5 Core 95 Sqmm alluminium cable

3.5 Core 70 Sqmm alluminium cable

3.5 Core 50 Sqmm alluminium cable

3.5 Core 25 Sqmm alluminium cable

4 Core 16 Sqmm alluminium cable

4 Core 10 Sqmm alluminium cable

4 Core 6 Sqmm Copper PVC cable

3 Core 4 Sqmm Copper cable

3 Core 2.5 Sqmm Copper cable

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI

3.5 Core 300 Sqmm alluminium cable

3.5 Core 240 Sqmm alluminium cable

3.5 Core185 Sqmm alluminium cable

3.5 Core 70 Sqmm alluminium cable

3.5 Core 50 Sqmm alluminium cable

4 Core 16 Sqmm alluminium cable

4 Core 10 Sqmm alluminium cable

3 Core 10 Sqmm Copper cable

2 Core 6 Sqmm Copper cable

2 Core 2.5 Sqmm Copper cable

3 Core 1.5 Sqmm Copper cable

Supply and making end termination with heavy Aluminum lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc., of following size: Makes:Dowels/Comet/SMI

3.5 Core 300 Sqmm alluminium cable

3.5 Core 240 Sqmm alluminium cable

3.5 Core185 Sqmm alluminium cable

3.5 Core 70 Sqmm alluminium cable

3.5 Core 50 Sqmm alluminium cable

4 Core 16 Sqmm alluminium cable

4 Core 10 Sqmm alluminium cable

3 Core 10 Sqmm Copper cable

3 Core 6 Sqmm Copper cable

3 Core 4 Sqmm Copper cable

3 Core 2.5 Sqmm Copper cable

3 Core 1.5 Sqmm Copper cable

Supply and installation of ESE Air Terminal of external wide area of protection system based on proactive Early Steamer Emission (ESE) Technology manufactured in accordance with NFC 17-102:2011, is made of high-quality, non corrosive and weather resistant XL-304 Stainless Steel Having triggering advance t= 30μs, Protection Radius ranging from 48 Meters in Level-I to 71 Meters in Level-IV when installed on a 5Meters Mast. ESE terminal is capable to withstand Current Impulses of 40kA (5 Shots of 8/20μs wave shape) and having capturing rod dia of 25mm. Makes : As per list of recommended brands. Make INE/ NIMBUS/ FOREND

Installation and commissioning of INE /NIMBUS/FOREND or equivalent advanced lighting protection systems which includes 1. Laying of CC Bed. 2. Installtion of lighting Rod, Counter, earth electrodes, 3. Laying of down conductor 4. Interconnection between the electrodes . 5. Termination of down conductor to earth bus etc complete.

Supply of 6 Digit Electronic/Mechanical counter Makes : As per list of recommended brands

Supply and Installation of IEC 62561-7 compliant Eco-friendly, Maintenance free, anti-corrosive, leadfree, super conductive, mineral based high-grade earthing compound, To enhance soil conductivity. With resistance <0.12 ohms-meter, Sulphur Free, Should be tested as per IEC-62561-7 for resistance Toxic Elements, Leachable elements etc. 25 Kg Bag, Bentonite Moisture Retaining Powder 30 Kg Bag, Concrete Earth Pit of Dimensions: Width: 320 mm, Length: 320 mm, Height: 192mm, Weight 30 Kgs, Load bearing Capacity: 5000 Kgs Makes : As per list of recommended brands.

Supply and laying of down conductor of 1x70sqmm single core PVC insulated unarmoured copper conductor cable for voltage up to 1100V as per IS 694/1990 of ISI mark. Makes: Polycab / Havells / RPG / RR Kabel

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in brick masonry (CM 1:3) Chamber of 400mmx 400m x 400mm with suitable cast iron cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 0.3mtr. length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including brick masonry (CM 1:3) Chamber of size 400m x 400m x 400mm covered with suitable cast iron Slab filling with salt and charcoal giving earth connection from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).

Providing independent CI earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply,erection,testing and commissioning of following sizes of copper strip on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required.

32 x 6mm Copper strip

Supply ,erection ,testing and commissioning of following G.I. Strip/G.I. wire on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required.

25x3mm GI strip

25x6mm GI strip

50x6mm GI strip

75x6mm GI strip

Supply,erection and commisioning of cable route marker with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) of size 150cm x 150cm at the bottom and 102cm x 102cm at the top with a thickness of 10 cm including inscription duly engraved as required.

Supply, fabricating , installing structural steel supports for fixing of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting for HT yard structure and exhaust pipe supports in DG set.

Supply , laying and fixing of following RCC hume pipe NP2 class in ground complete with RCC collars, jointing with cement mortar 1:2( 1 cement : 2 fine sand) etc including labour charges etc complete as required.

300mm dia NP2 RCC Hume pipe

150mm dia NP2 RCC Hume pipe

Supply and laying of 100 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors for entry of cable at road crossing and central wedge of road at a depth of 900.00 mm wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete.

Earth work excacvation including all soils for trench,

GI perforated cable tray

Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete (NB:Add 30% Extra for perforated cable tray with cover). ISI Make profab or its equivalent

300mm x 50mm x 1.6mm

600mm x 75mm x 2.0mm

Ladder type Cable tray

Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders and etc., complete

300mm x 50mm x 2.0mm

600mm x 75mm x 2.0mm

Supply and Installation of RACEWAYS of following sizes along with required fixing arrangements, with coupler plates, and the race way should be fitted on the floor etc. complete.

RACE WAYS JUNCTION BOXES

Supply and Installation of RACEWAYS Junction Boxes of following sizes along with required fixing arrangements, with coupler plates, and the race way should be fitted on the floor etc. complete.

Supply and providing the following materials at site including cost of all accessories and labour charges etc., complete as required.

First aid box 18"x12"x8"

Danger Board in 3 languages English/Telugu/Hindi in red colour with 11KV marks shall comply with IS:2551-1982. 250x200mm,

Danger Board in 3 languages English/Telugu/Hindi in red colour with 440V marks shall comply with IS:2551-1982. 250x200mm,

Shock instrution chart in English / Hindi / Telugu duly framed with front glass

Supply and laying of following size ISI …….. outer dia medium grade with IS:9537 part 3 FRLS regid PVC pipe, PVC deep Junction Boxes confirms to IS : 3419, PVC Bends including required accessories complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/ AKG/Beljin

25mm (1.80 mm thickness)

32mm (2.10 mm thickness)

Wiring with 3 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box and front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Primary Light Point)

Secondary Light Point Supply and fixing of ceiling rose for secondary light point (conduit and wire is extra) complete

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box a nd front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Fan Point)

Supply and fixing of 1 no. 6A 3 pin modular socket with 1 no. 6A modular switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Common switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.

Supply and Fixing of 16A 2Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ] Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.

Supply and fixing of 20A SP Metallic Plug and Socket with provision for 1 No of SP/TP MCB for control in SS enclosure as per IS 8623; IS 13032; IEC 61439-3 Makes: As per list of recommended brands as category I.

Supply and run of 2 of (1.5 sq.mm.) FR PVC insulated flexible copper wire (Phase, Neutral) Copper cable (Earth) conductor in the existing conduit pipe for power points including labour.

Supply and run of 2 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 1 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 56/0.3mm (4.0 sq.mm.) FR PVC insulated flexible copper wire (Phase, Neutral) with run of 1 of 36/0.3mm (2.5 sq. mm.) Copper cable (Earth) conductor in the existing conduit pipe for power points including labour

Supply and run of 2 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire (Phase, Neutral) with run of 1 of 56/0.3mm (4 sq. mm.) Copper cable (Earth) conductor in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 4 of (4.0 sq.mm.) FR PVC insulated flexible copper wire (Phase, Neutral) with run of 2 of (2.5 sq. mm.) Copper cable (Earth) conductor in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 2 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and fixing of distribution board Protection suitable for IP43, S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way SPN Distribution board 40A DP MCB 10KA 1 Nos as incomer and 8Nos 6-32A SP MCB's 10KA as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 4way TPN Distribution board 63A 4P MCB 1Nos as incomer and 12Nos 6-32A SP MCB's as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way TPN Distribution board 63A 4P MCB 1Nos as incomer and 24Nos 6-32A SP MCB's as outgoers

Light, Fan Fittings

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I. a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight.

Supply of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser with IP 65 Protection etc., complete., Makes : Philips/Bajaj / Crompton / Surya / Havells / Greenlites/ Insta Power/HPL /Halonix/ Panasonic.

Supply and fixing of 18W heavy duty LED Down lighter, suitable for Recessed mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 120 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc.,complete with earth connection and not less than two years warranty. a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ FortuneArrt/ Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight

Supply and Transportation of 36W, 2' x2' (600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% etc., complete with 5 years warranty. a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready / FortuneArrt// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Supply and transportation of 200W LED High Bay Luminaire with high power COB LED made of pressure diecast aluminum housing with powder coated, supply input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, having system efficacy >=120 lumens/watt and junction temperature < 70°C, with ingress protection IP66, IK05, Driver surge protection 4KV, in-house additional surge protection ≥ 5KV with wide/narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. a) LUMINAIRE MAKE : Phillips /Lighting Technologies(LT) / GE / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG. Cat No.SAUCERGENXADVPROHBP200WLED757PNBBORL of Havells Make

Supply, Fixing of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with remote and without Regulator. Makes : Crompton / Bajaj Kassels 50 / Usha atom

Supply ,installation testing comissioning of 12' (300mm) Light duty exhaust fan with wire guard Completely nuts and bolts and 23/0060 Twin core wire including all labour charges etc.,complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DB / Orienthill air.

Note Before : a) All works to be carried out as per relevant IS Specifications wheather so mentioned in description of works or not. b) The quoted rate shall include for providing MS brackets clamps, bolts and nuts etc., in ducts on parapet walls and under ceiling for drawing and supporting the pipes etc., two coats of enamel painting for the brackets, colour coding the exposed pipe works, identification labels, making bores in masonary/RCC chasing the surfaces for concealed piping and making good the chased surfaces and bores in CM 1:4 / PCC 1:2:4 curing etc., complete.

SANITARY FIXTURES

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour as directed by Engineer-in-charge.

S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 7 years warranty including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work.

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Double C.P. Pillar cock

Stainless steel sink

Supplying & fixing SINGLE BOWL stainless steel sink size 24"x18"x8 "(609.6 x 457.2 x 203.2mm) 1 mm thick with accessories

Supply & fixing overhead shower rose with revolving joint and 150 mm long swivel shower arm Jaquar make queen series. with 7 years warranty, Overhead Shower ø180mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System etc., complete. including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing wall mixer with telephonic shower arrangement with crutch and telephone shower with flexible tube Jaquar make Continental series Chrome colour for bath tub with 7 years warranty

Supply & Fixing of 12.7 mm dia NP push cock Ist quality Jaquar Continental series, Chrome Finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Angular stopcock with wall flange Jaquar Continental series, Chrome finish with 7 years warranty. (Make: Jaquar, Model: 5053) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply, Transportation and fixing of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water heater with SS tank and ABS plastic body of ........ capacity to withstand up to 6.5 bar of water pressure including all standard accessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos nylon / PVC / Metallic hose pipe, testing and all labour charges etc., complete. Makes : Crompton Solarium BLX / Jaquar Elena / Venus Lyra / Racold Eterno Swift / AO Smith HSE SDS /Havells Puro Turbo/Warmex

a) Capacity : 15 lts. 2 K.W heating element

Supply & Fixing of Towel Rack with Lower Hanger (Stainless Steel) with hook Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AHS-CHR-1581H of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Towel Ring Round Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AQN-CHR-7721 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Grab Bar (Stainless Steel) 450mm Long Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AHS-CHR-1503 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Wall Mounted Paper towel dispensers towels with C/Z folds capacity: 400-600 C/Z towels material: AISI 304 stainless steel finish: satin (CAT No. PTD-SAP-DT0106CS of Jaquar continental Range).

Supply & fixing of toilet paper holder Jaquar make Queen series. with 7 years warranty: Chrome plated including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing Soap Dish Recessed Type (Stainless Steel)Jaquar make Continental series, Chrome Finish with 7 years warranty (CAT No. AHS-CHR-1531 of Jaquar). including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing Tumbler Holder for Soap Dispenser with Glass bottle Jaquar make Continental series, Chrome Finish with 7 years warranty (CAT No. AKP-CHR-35735P of Jaquar). including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 590 x 375 x 390 mm of Ist quality including cost and conveyance of all materials, overheads and contractor's profit etc. complete for finished item of work in all respects.

Supply & fixing of Jaquar make Sensotronic concealed type flushing valve for urinal complete set with installation box with control cock, Chrome plated with 7 years warranty. including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying and fixingTV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost & conveyance of all materials, labour charges, etc. overhead & contractor's profit complete for finished item of work in all floors as directed by Engineer-in-charge.

Supplying and fixing of hand dryer of approved quality (euronics EHOSM)including cost and conveyance of all materials and labour charges,overheads and contractors profit complete for finished item of work for all floors

Supplying, fixing and testing PVC soil, waste and vent pipes (SWR) confirming to IS13592 :1990, type B with Solvent Cement joint inclusive of all necessary specials like bends, tees, offsets, door ends, junctions, cowls, etc., laid under floor/fixed on walls,and in pipe shafts etc., complete.The quoted rate should include necessary MS supports like hanger supports, grip bolts and clamps etc., including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

a) PVC soil, waste and vent pipes 160mm dia - 6Kg/Sq cm

b) PVC soil, waste and vent pipes 110mm dia - 6Kg/Sq cm

c) PVC soil, waste and vent pipes 75 mm dia - 6Kg/Sq cm

Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practicefor nominal dia 75 mm (3") and grating size 100 mm dia of weight not less than 4.0 Kgs including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying, fixing, testing and commissionig of approved make PVC vent cowl with necessary accessories etc., complete.

Supplying & fixing 150 mm x 100 mm SWG gully trapsconforming to ISI 651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Supplying, installing, testing and commissionig of R.C.C NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe with all leads and lifts, making necessary connections as required etc., complete. (Provision for road crossings)

Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors

Supplying & Fixing of PVC/SWR Plain Bend of 110 mm dia

Supplying& Fixing of PVC/SWR Door Bend of 110 mm dia

Supplying of PVC/SWR 45 degree Bend of 110 mm dia

Supplying & Fixing of PVC/SWR Single Tee of 110 mm dia.

Supplying & Fixing of PVC/SWR Single Tee with door of 110 mm dia.

Supplying & of PVC/SWR Double Tee of 110 mm dia.

Supplying & of PVC/SWR Double Tee with door of 110 mm dia

Supplying & of PVC/SWR Single Y of 110 mm dia.

Supplying & of PVC/SWR Single Y with door of 110 mm dia.

Supplying & of PVC/SWR Double Y of 110 mm dia.

Supplying & of PVC/SWR Double Y with door of 110 mm dia.

Supplying & of PVC/SWR Coupler of 110 mm dia.

Supplying & of PVC/SWR Vent Cowl of 110 mm dia.

Supplying & of PVC/SWR Pipe clip of 110 mm dia.

Supplying & of PVC/SWR P-Trap(big with air vent) of 110 mm dia.

Supplying & of PVC/SWR Floor-Trap(Bell mouth) of 110 mm dia.

Supplying of PVC/SWR Plain Bend of dia 75 mm

Supplying of PVC/SWR Door Bend of dia 75 mm

Supplying of PVC/SWR 45 degree Bend of dia 75 mm

Supplying of PVC/SWR Single Tee of dia 75 mm

Supplying of PVC/SWR Single Tee with Door of dia 75 mm

Supplying of PVC/SWR Double Tee of dia 75 mm

Supplying of PVC/SWR Double Tee with door of dia 75 mm

Supplying of PVC/SWR Single Y of dia 75 mm

Supplying of PVC/SWR Single Y with Door of dia 75 mm

Supplying of PVC/SWR Double Y of dia 75 mm

Supplying of PVC/SWR Double Y with Door of dia 75 mm

Supplying of PVC/SWR Coupler of dia 75 mm

Supplying of PVC/SWR Vent Cowl of dia 75 mm

Supplying of PVC/SWR Pipe Clip of dia 75 mm

WATER SUPPLY SYSTEM

S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge.

S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type

b) 25 mm dia (Screwed ends)

c) 32 mm dia (Screwed ends)

d) 40 mm dia (Screwed ends)

d) 50 mm dia (Screwed ends)

Supplying, installing, testing and commissioning CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation, CED and taxes etc., complete. Operation done with worm actuator ISI marked Rate at Ex-Factory Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEU-G/Honeywell

Supplying and lying P.C.C support blocks of 1:2:4 concrete mix of sizes as given below for pipe supports on the terrace complete.

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type

RAIN WATER SYSTEM

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. for Rigid PVC rain water pipes conforming to IS 13592 - 1992 (Type A) with all fittings like shoes, bends fixed in the pipe shafts (ducts) with suitable supports etc., complete.(for RWP & balcony drainage)

Supplying, installing, testing and commissionig of R.C.C NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe with all leads and lifts, making necessary connections as required etc., complete. (Provision for road crossings)

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Construction of man hole with best quality, approved table moulded bricks in CM 1:6, 500mm dia @ top and 1200mm dia. @ bottom over a bed of 250mm thick PCC 1:4:8, walls plastered smooth inside in CM 1:3 and outside with CM 1:6 with sponge finish benching and channelling in PCC 1:3:6 supplying & fixing PVC steps as per drawing for maintenance. The manhole shall be provided with heavy duty RCC frame & cover. Circular 550 mm dia. Clear opening etc., complete. The quoted rate shall also include for necessary pvc steps, excavation, refilling, disposing off surplus earth with in a lead of 300M etc., complete. Depth upto 2.0 Mtrs.(Quotation)

Manhole cover/pvc steps : Southern concrete Industries.

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

FIRE PUMPS, EQUIPMENT, PIPING, VALVES & ACCESSORIES ESTIMATE

Electric Motor Driven Hydrant and Sprinkler Pump Supplying, installation , testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 70 Mtr. head conforming to IS 1520 b) Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti-vibration pads.

Electrical Motor Driven Jockey Pump : Supplying, installation, testing and commissioning of electric driven pressurization / Jockey pump suitable for automatic operation and consisting of following: complete in all respect as required a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 70 Mtr head conforming to IS 1520 b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti-vibration pads. Makes: As per list of recommended brands.

Providing, laying, testing & Commissioning of following classes MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets including transportaiton and painting with two coats of red oxide paint and one coat of post office red enamel paint and all labour charges and cost of all accessories etc., complete. Makes: Jindal / Hissar / Tata pipes/Prakash Surya

Supplying and fixing single headed Internal / External hydrant valve with instantaneous Gun metal/Stainless steel couplings of 63mm dia with Cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain as required. Makes: Newage/ Winco/ Padmini / Safex/Minimax/ Newtech/Honeywell/Kartar

Single Headed Gun Metal

Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEU-G/Honeywell//Kartar

Providing, installation, testing and commissioning of dual Plate non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required. Makes: BDK / NEU-G / Leader/ Zolotto /SANT/Honeywell//Kartar

Supplying and fixing 63mm dia, 15 mtr long RRL hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required. Makes: Newage/ Winco/ Padmini / Safex /

Supply, installation, testing and commissioning of stainless steel Y – Stainer fabricated outof 1.6 mm thick SS 304 with following sizes confirming to IS specifications complete with rubber gasket, GI bolts , nuts, washers etc as required. Makes: Leader / Zolotto/SANT/Honeywell/Kartar

Supplying and fixing First -Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to Is 884 with upto date amendments, complete with the following as required. a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose Thermoplastic / Textile reinforced / Rubber braided / Polypropylene Type - 2 as per IS:12585 Makes: Reliance/ Newage/ Safex/NewTech/Winco/Minimax/Kartar b) 20mm (Nominal internal) dia gun metal ball/gate valve and nozzle. Makes:NEU-G/SANT / Safex/Kartar. c) Drum and brackets for fixing the equipments on wall. d) Connections from riser with 25mm dia stop valve (gun metal) & MS pipe.

Supplying and fixing of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required. makes:Minimax/Safex/Newage/Winco /Padmini/NewTech/Kartar

Supply and fixing 63mm dia Gun metal branch pipe with 20mm (Nominal internal diameter) size Gun metal conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required. Makes: Newage/ Winco/ Padmini / Safex / Minimax/NewTech/Kartar.

Supply and fixing 4 way fire brigade connection of cast iron body with 4 Nos Gun metal Male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required. Makes: Newage/ Winco/ Padmini / Safex / Minimax/NewTech/Honeywell/Kartar

Supply and fixing 2 way fire brigade connection of cast iron body with 2 Nos Gun metal Male instantaneous inlet couplings complete with cap and chain as required for 100mm dia MS pipe connection, conforming to IS 904 as required. Makes: Newage/ Winco/ Padmini / Safex / Minimax/NewTech/Honeywell/Kartar

Supply and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Providing fixing, testing and commissioning of 15mm size quartzoid bulb type sprinklers of rating 68º C. pendent / side wall with required accessories. Makes: HD / TYCO / VIKING / NEWAGE/ SHARP / SAFEX/Kartar

Providing and fixing of Pressure Switch in the MS pipe Line including connection etc as required. Makes : Danfoss / Indfoss /Systemsensor/Honeywell

Providing and fixing Flow Switches in 100mm dia MS pipe. Makes :System Sensor / Switzer/Honeywell

Supply, installation, testing and commissioning of Bourden type, stainless steel dial type pressure gauge with isolation valve and pipe having calibration of 0-16 kg/cm2. MAKES: HGURU / FIEBIG

Supply, installation, testing and commissioning of 25mm dia Gate valve Makes : Zoloto / Leader / SANT/NEU- G/Kartar

Supply, installation, testing and commissioning of 25mm dia Ball valve Makes : Zoloto / Leader / SANT/NEU- G/Kartar

Supply, installation, testing and commissioning of 25 / 20mm dia Air Release Valve Makes : Zoloto / Leader / SANT/Kartar

Providing, fixing, testing & commissioning of installation control valve of cast iron body,brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : Makes : HD / TYCO / NEWAGE

Supplying, installing, testing and commissioning of CI body Foot Valve with brass strainer with necessary flanges, nuts and bolts etc., complete on to the suction line. Makes:Normex /SANT/Kartar

200mm nominal dia

150mm nominal dia

Supplying and wrapping the anticorrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap as per specificatios. Make:IWL(PIPE KOT) or its equivalent

150mm nominal dia

Supply, fabricating , installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting.

Fabrication ,transportation and supply of fully outdoor type wall mounted/floor mounted automatic control panel board with IP-66 protection for 3 phase 7.5 H.P. Motor of Booster Pump set of size 600x 600x 250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside and mounted on suitable angle frame work of 450mm height on a PCC pedestal over the terrace consisting of the following equipment/ components with all internal wiring for power and control circuits and control wiring from sensors like pressure switches etc., using copper FRLS cables of suitable size and capacity and cable clamp etc complete with DOL Starter of including cost of all materials and all labour charges, transportation etc., complete for finished item of work. (Panel shall be fabricated from reputed and branded manufacturers approved by dept and having CPRI approval with CPRI test certificates).

1) Supply & Fixing of DOL Starter suitable for 7.5 HP Pump Motor - 1 No 2) Supply and Fixing of (0-500) V range Volt meter on existing panel, making connection by PVC insulated copper conductorwith PVC sleeves/channel etc.,as required.-1 No 3) Supply and Fixing of CT operated direct reading type Ammeter, below 500A, on existing panel , making connection by PVCinsulated copper conductor with PVC sleeves/channel etc. as required - 1 No 4) Supply and Fixing of selector switch for Voltmeter & Ammeter (4 position) including making connection etc. as required.- 2 No 5) Supply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot indication lamps Red, Yellow & Bue Colour with integral circuit,terminal block, including connection etc. as required - 3 No 6) Supply and Fixing of Single Phase Preventor of suitable range - 1No. 7) Supply and fixing of ISI Mark suitable capacitor 8) Supply and Fixing of MPCB (Motor Protection Circuit Breaker) suitable for 7.5 HP Motor, Icu=50 KA with adjustable thermal and magnetic release Panel Mounted 9) Supply and Fixing of Non- Luminious type, ON/OFF/TRIP push button actuators and integral contact block of dia. 22.5 mm including making connection etc. as

10) Supply and Fixing of AC operated heavy duty 230 /440 Volt power contactor conforming to IS:13947-4- 1/IEC:947-4-1 having provision of mechanical interlocking, Din rail mounting type including making connections, testing etc. as required. - 3 pole, 35-40A AC3 Rating, Contactor - 1 No 11) Supply and Fixing of 24 V DC ,Aux Contactor with 2 NO+2NC Contacts with suitable NO+NC ADD on Block 12) Supply and Fixing of thermal over load relay with built in single phase protection and having at least 1NO & 1NC contacts,manual /auto reset facility including making connection testing etc. as required - 1 No 13) Supply and Fixing of Current Transformer, upto 150 / 5 Ratio , 10 VA , class 1 accuracy with all necessary support inexisting panel including connection etc. as required - 3 No

Control & Power wiring with suitable size of approved make FRLS PVC flexible copper wires and from pressure sensors etc., , Earth Bus Bar, Door Loop earhings, Ferrules, danger plate, door locks, mounting arrangements with 40x40x6mm MS angle iron frame, PCC and masonary work, painting for MS angle frame with red oxide and enamel paint etc., and all other accessories including all labour charges etc with connections for finished item of work including transportation charges Makes: as per approved in APSOR 21-22

Providing and fixing of gun metal fire Brigade Suction Hose coupling (Drawout Connection) with nut for female coupling as per IS:902- 1974 complete with 100 mm dia. G.I. Suction pipe and 100 mm dia. 1No. C.I. Foot valve flanged (to be connected to static water tank). Makes: Newage/ Winco/ Padmini / Safex /Minimax/NewTech/Honeywell/ Kartar.

Supply,Installation,testing and commissioning of stainless steel puddle flange fabricated out of1.6mm thick SS 304 confirming to IS specifications including nuts, bolts and rubber insertions etc. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEUG/Honeywell/ Kartar

200mm nominal dia

150mm nominal dia

Supply, Erection, Testing and commissioning of Sluice valves as per IS:14846 ( PN 10 Rating, for suction side of the pumps) and rising spindle type with flanges, bolts, nuts, washers, gaskets etc.The valve shall be fitted with Supervisory switch for monitoring. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEUG/Honeywell/ Kartar

CONTROL PANEL FOR FIRE PUMPS

Supply, installation, testing and commissioning of following fire fighting panel manufactured as per IEC 61439 suitable for 415 V, +/- 10% Volts, 3 phase, 4 wires, 50 Hz power distribution system. The panel shall be free standing floor mounting sheet metal enclosed dust and vermin proof conforming to IP-52, compartmentalized design, fabricated out of 14 SWG sheet steel, painting, earthing numbering, danger plate as per specifications and drawings , flush front with Aluminum bus bars, separate earth bus bars of 40 x 5 mm (Aluminum) to be provided throughout the length of the panel. The incoming and outgoing feeder breakers, fuses, indicating lamps etc shall be accommodated in a modular multitier arrangement. The painting shall be done as per relevant IS codes/as specified in the specifications. Adequate size cable alley shall be provided all round the panel and in the back for each cable bending and termination. The panel shall be fabricated by TAC/Fire authority approved vendor. The outgoing feeders inside the panel shall be connected through solid bus bars. Flexible cable links are not acceptable. All pumps stator feeder must have potential free contact to give status of pump (ON and trip status to fire control panel) (Data 5)

Bus bars shall be provided with heat shrinkable sleeves and shall be colour coded. The panels shall be suitable for cable entry from top. The panels shall be fabricated after the approval of fabrication drawings. All wires shall be PVC insulated and cables used will be XLPE insulated. 2 Nos. earthing terminals shall be provided for 3 phase, 415 V, 50 HZ supply system. M Lifting hooks shall also be provided in case of large panels. Cadmium plated hardware shall be used in fabrication of Panels. A. COMMON PANEL IN FIRE PUMP HOUSE

(I) INCOMER One (1) No. 800A 4Pole MCCB( 50KA) L&T make One (1) No. Multifunction Meter for measurement of voltages, current and frequency (ELF-3254 of conzerv or approved Equivalent) with suitable ratio CTs and back up SP MCB/Fuses. 1 Set (3 Nos.) of phase indication lamps LED Type with backup SP MCB. Three (3) Nos. of indication lamps for ON/OFF & Trip with backup SP MCB. Incoming feeder must have provision of potential free contact for fire panel. This contact will provide the status of power in Fire fighting pump panel.

(II) BUSBAR 1000A, 50KA,TPN Aluminium busbar insulated with PVC Colour coded heat shrinkable sleeve. Separate earth busbar of 50X6mm Aluminium shall be provided. (III) OUTGOING. a) MAIN FIRE PUMP (154-160 HP) - 02 Nos 400 Amps TPN MCCB suitable for 154-160HP star delta starter with thermal range of 250A with Ammeter (0-250A) with selector switch and CTs of ratio 250/5A , 5VA, Class 1.0. complete with over load relay with separate single phasing protection feature, ON/OFF & TRIP, indication lamp, AC3 duty contactors, Auto/Manual selector switch and sufficient nos. of potential free spare contacts, etc. (For Hydrant & Sprinkler pump) b) JOCKEY PUMP (30 HP) - 02 No 63A TPN MCCB , suitable for 30HP star delta starter with thermal range of 63A with Ammeter (0-63A), selecter switch CTs of ratio 63/5A , 5VA, Class 1.0. complete with over load relay with separate single phasing protection feature, ON/OFF & TRIP, indication lamp, AC3 duty contactors, Auto/Manual selector switch and sufficient nos. of potential free spare contacts, etc.

d) DIESEL ENGINE MAIN PUMP - 01 No Control for Diesel engine comprising:- Auto/Manual selector switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode. Indication lamp for High/Low Lub.oil pressure, High Water Temperature. And Engine ON indication. Battery charger suitable for 12 V/24V DC with boost and tickle selector switch, 0-15 V/0-30 V DC volt metre, 0-20A DC Ammetre. e)1 No. 63 A TPN MCB of 10 KA for (L + PDB) g) One (1) No. 250A TPN MCCB SPARE h) One (1) No. 63 A TPN MCCB SPARE i) One (1) No. 40 A TPN MCB SPARE j) One (1) No. 32 A TPN MCB SPARE All standard relays and accessories for automatic operation of diesel engine. SYSTEM CONTROLLER Designing, Supply, installation, testing and commissioning of system controller to control operation of Main Electric Fire Pump, Diesel Pump, Pressurization Pump in sequence as per specification consisting of relays, timers, sensors, annunciation window for fault indication, complete as per specification.

Panel shall have sufficient NO/NC contacts for extending the status( annunciation) of fire pumps to the Fire alarm panel. All interconnecting power & control wires/cables suitable size within the panel and from panel to motors diesel engine, pressure switches, level switches, cable Tray, pipes etc. including brass glands termination within fire pump house and earthing as per specifications including necessary RCC foundation for mounting of panel. Note: Contractor should submit necessary shaft drawings for approval of electrical consultants before fabricating the panel.

Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel

10 SqmmX 4 core

16 SqmmX 4 core

120 SqmmX 3.5 core

Supply of PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR kabel / Havells /KEI/Polycab/ Gloster/ Goldmedal/GM

1.5 SqmmX 2 core

2.5 SqmmX 2 core

3.0 SqmmX 3 core

Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete (NB:Add 30% Extra for perforated cable tray with cover)

150mm x 50mm x 1.6mm

300mm x 50mm x 1.6mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI

3.5core x 120 sq.mm

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005 ,IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI

4 core X 6/10/16 Sqmm

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work.

ADDRESSABLE TYPE FIRE ALARM SYSTEM

Supply, install, test and commissioning of addressable peer to peer Networkable analogue addressable type fire alarm control panel with minimum 1500 Character / 240X64 Pixel / 7inch Touchscreen graphic LCD display. The panel should be equipped with sufficient numbers of loop with 20% spare capacity, with each networkable intelligent fire alarm Control Panel having SLC with capacity of min 250 detectors/ devices in any combination (Min 120 Detector) with key pad, dual flash-based microprocessor technology, inbuilt USB Port for upload and down load the configuration tools, RS232 serial port for direct PC or modem connection, inbuilt NAC's, min 20 programmable Zonal LEDs and operates on 240V AC + 10% with 50 Hz with built in charger. The panel shall have fire, fault relays, option of BMS integration MODBUS/ BACKNET, graphical software for provision of TCP/ IP modules, Remote Access, Class 'X' wiring with provision of both class 'A' and class 'B' wiring in the SLC circuit, user friendly with communication facility to monitor & control the FACPs from a single window.

The panel shall be suitable for minimum of 5000 event record facility, event fetch from FACP facility and the single panel shall be suitable for min 2000 fire zones and 200 Panels/ Nodes in one network with all other accessories required to successfully run the system. The panel shall be completed as perUL and FM/EN54 & VDS standards (The System cost shall be included of all necessary cards, modules, Panel enclosure, CPU and associated accessories to complete the system design) Makes: Makes: Notifier / Edwards/Bosch

Supply, Installation , Testing & Commissioning of Network Active Repeater Panel with 1500 Character / 240X64 Pixel / 7inch Touchscreen. The LCD shall Display all events / detectors, devices status of complete systems in the networked. Makes: Makes: Makes: Notifier / Edwards/Bosch

Supply, Installation, Testing and Commissioning of beam detector having 100 meter of detection range. Unit have a trans-receiver and a reflector.With proper mechanism of alignment. Having set parameters of sensitivity to avoid false alarm.: Makes: Notifier / Edwards/Bosch

Supply, Installation, Testing & Commissioning of Analogue Addressable Multisensor (Smoke & Heat) detector with LED with standard base having capacity of min 126 address combination. Operating temperature -40°C to 70°C && Humidity 0-95%. The detector should have polling 360 degree viewable LED with 5 class approved response modes all approved with the relevant standards , drift compensation and transient rejection. The detector should trigger heat alarm as per the A1R class requirement.The detector shall have facility to mount in different comprehensive environment like Hostile environment, Parking Garage, Precious storage, Ware house and normal working environments. The detector should have self locking mechanism and requires special tool to remove this detectors.The detector should have hard address inside the base.The detector should be mad up of fire retardant material & should be melt above 100 degree C. The detectors must be openable for the cleaning of dust whenever required.The detector must have 4 non volatile memory to write the installation date & site codes Makes:: Notifier / Edwards/Bosch

Analogue Addressable Heat detector and LED with standard base having capacity of min 126 address combination. Storage temperature - 40°C to 80°C & Humidity 0-95%.The detector shall have facility to mount in different comprehensive environment like Hostile environment, Precious storage, Ware house and normal working environments. The heat detector must trigger the alarm as per the A1R/A2R/A2S/CR/CS requirement.The detector should have self locking mechanism and requires special tool to remove this detectors.The detector must have non volatile memory to write the installation date & site codes. Makes:: Notifier / Edwards/Bosch

Supply, Installation, Testing & Commissioning of Analogue Addressable loop powered Sounder & Beacon with inbuilt isolator and having Min 15 distinct sound patterns/ multitone to indicate Exit doors and direct occupants for safe and fast evacuation and 100dB output with minimum 1Hz Frequency flash rate designed for IP65 requirements and approved to operate in –10°C to +55°C temperature, complies with the essential requirement of the EMC Directive to be supplied with Junction Box, Glands and other mounting accessories for proper installation Makes:: Notifier / Edwards/Bosch

Supply, Installation, Testing & Commissioning of Dust and Vermin proof (Resettable) addressable analogue Manual call boxes along with Isolators inbuilt having front reset mechanism with 170° viewable LED and can be viewed from the distance of 7 M. also have inbuilt isolator having operating temperature from - 40°C-70°C to initiate audio visual alarm in case of Human detection of fire. The manual call point must be indoor type with IP 44 rating.The call point must be ressatable type without breakglass. Makes:: Notifier / Edwards/Bosch

Supply, Installation, Testing & Commissioning of Loop isolation module which consists of LED. This LED shall be mounted with in a round polycarbonate encloser. Isolator Base for Isolators. Makes:: Notifier / Edwards/Bosch

Supply, install, test and commissioning of Analogue addressable Control (Input/Output) module with inbuilt relay and isolator with LED indicator, approved to operate in –10°C to +55°C temperature, complies with the essential requirement of the EMC Directive to be supplied with Junction Box and other mounting accessories for proper installation. In case of Manufacturer with single Input or Output module need to supply One quantity of each for line item 5 years of warranty.. Makes:: Notifier / Edwards/Bosch.

Supply and Transportation of XLPE/PVC insulated & PVC sheathed armoured cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 etc complete.

Supply and fixing of Escape signage boards in Rigid Photo luminecent based glow in Dark rigid sheet with high intensity luminous properties with specificaiton. Makes: Cease Fire or its equivalent make Model-1ES01

Supply, installation testing & commissioning of Input module.The rates quoted for laying shall include laying of cables on surface with saddles,screws including material and labour charges etc complete as per site requirement. Makes:Siemens / Morley / Honeywell/ Ravel/Seaara/Apollo.

Supply, Installation of Intalligent analogue addressable monitor modules including the cost of mounting accessories complete as per specifications and as required. Makes:Siemens / Morley / Honeywell/ Ravel/Seaara/Apollo.

Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warrantyIncluding transportation, all taxes and all labour charges etc complete.. Makes : Safex / Kenex / Bharat / Reliance/NewTech/Kartar

Supply and fixing of ABC stored pressure squeeze grip type fire extinguishers, 9 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty Including transportation, all taxes and all labour charges etc complete. Makes : Safex / Kenex / Bharat / Reliance/NewTech/Kartar

Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate powder 90 (MAP) 6 Kg Fire extinguisher, stored pressure type, pressure gauge, gross wt. 9.4 kg, empty wt.3.4 kg, Discharge time minimum 13 sec, controllable discharge mechanism, range min. 4 mts applicable on classes A,B, C & electrically started fire, A rating -4 A, B rating -34 B, can construction: Deep drawn and Co2 mig welding, Valve construction: Forging & Machining, internal coating of can: Epoxy powder coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness:1.60mm, Helium leak detection tested with 5 years warranty Including transportation, all taxes and all labour charges etc complete. of category-I of Makes : Safex / Kenex / Bharat / Reliance/NewTech/Kartar

Supply of round bottom G.I sheet bucket of 9 Ltrs. Capacity as per IS:2546 made out of 24 gauge GI sheet with extra handle at bottom duly painted inside and red out side with printed with FIRE Mark for stand and hook and filled with sand and arranged to existing stand or hook. ( MR )

Providing floor mounting stand for keeping 4No of fire bucket 1500mm length, 900mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of enamel paint.

PUBLIC ADDRESS SYSTEM :

Supply and Fixing of Ceiling mount Speakers with 6W impedance with power taps of 1.5W/3W/6W etc., complete. Makes :Make: Ahuja/Mega/Studio Master.

Supply, Installation, Testing and Commissioning of speakers with following specifications:12W Wall mount box Speaker, rated power: 12W, Tapings 100 volt line : 12/6/9WTransformer Impedence, Ohms , 100V : 1.67k/3.33k/6.66k, Frequency Response : 55-15,000 HzSPL at 1kHz (1W/1M) : min 85dB, Color /Finish : White RAL9016 / Black. Makes : Makes - Bosch/Honeywell

Supply and Fixing of High fidelity 2-Way wall mountable Speakers with 16W impedance with power taps of 4W/8W/16W etc., complete. Makes :Make: Ahuja/Mega/Studio Master

Supplying, installing, testing and commissioning of 25 zone selector P.A. console and with CRCA sheet housing and control desk aslo included with rack arrangement as required. Console shall have all call / call back type complete with battery back up and it should also work on AC single phase power. (considered each floor one Zone).Makes - Bosch/Honeywell

Supply, Installation, Testing and Commissioning of 2x1.0 Sq mm speaker cable etc., 2CORE TWIN TWISTED 8/0.2 ATC, Multi strand over all armoured speaker cable, complete with connections ( Shall be on actuals ).Make:Polycab/RR Kabel/Finolex or equivalent

Supply installation testing and commissioning of amplifier with inbuilt 1500 watts amplifier with emergency microphone along with all interconnections suitable to integrate with fire alarm panel. Make:Honeywell/Bosh/Phillips or equivalent

Supply and Fixing of wireless hand held microphone Having Frequency Response of 40Hz-13kHz etc., complete. Makes : As per list of recommended brands.

Supply and Laying of Microphone Cables and connectors etc., complete. Make: Prevailing models in Market.

Supply of ISI, 25mm outer dia,1.6mm thickness MS conduit pipe as per lS-9537 Part ll . Makes: NAI / Bharath / GB / AKG/Precision.or equivalent

25 mm ( 1.6 mm thick)