Renovation work of Nauka vihar attraction at Ekta Nagar,Dis:-Narmada

Name Of Work: Renovation work of Nauka vihar attraction at Ekta Nagar,Dis:-Narmada

BOQ(Bill Of Quantities)

Sr No Description QTY Unit Rate Amount

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(C) Hard Murrum

Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone aggregates

2 20 mm nominal size) and curing complete excluding 44.56 cum 3555.66

cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete

M.250 and curing complete excluding the cost of

3 formwork and reinforcement for reinforced concrete 40.18 cum 4219.01

work in (A) Foundations, footings, Base of columns

and Mass concrete

Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm length,30cm

height and 15cm thick of M250 grade concret as per

4 approved design and including excavation for fixing in 210.00 cum 371.21

proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Coursed rubble masonry with stone of approved

in foundations and plinth in Cement Mortar 1:4(1-

Cement : 4-coarse sand) etc. complete.

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc. complete.

Providing and fixing in position chain link fencing of

10 Guage (4"x4" size) around 1.65 mtr long and 3 mtr

c/c angle frame 35x35x5 mm size including one coat

of primar & two coats of enamal paint as per

direction by EIC using 3 nos horizontal row of G.I.

barbed wire weighing 9.38 Kg/ 100 rmt stained &

fixed to MS angle frame with iron staples including

foundation pit of 30x30x30 cm with cement concrete

1:2:4 etc complete with all transportation, materials,

labours, tools & plant-taxes fees & royalties. with all

fixers etc completed.

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm.

8 in foundation and plinth in Cement Mortar 1:5. (1- 2.84 Cum 5193.54

Cement : 5 -fine sand)(C) Fly Ash Bricks

Providing and fixing pre-cast Rubber Dye / steel Dye

1711 Providing and fixing pre-cast Rubber Dye / steel

Dye inter locking concrete block 60mm thick with

grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand

layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-

2018 etc. Complete.

Providing and fixing machine cut, free edges, pre

mirror polished Black Granite stone slab 18 mm thick

(single piece not less than 150 cm ) for vertical

wall/Doors/Windows Sill,Jams for cladding as per

design including full moulded round inside edge

Wall painting (two coats) with plastic emulsion paint

of approved brand and manufacture on undecorated

wall surface to give an even shade including throughly

11 brushing the surface free from mortar droppings and 50.50 Sqmt 83.98

other foreign matter and sand papered smooth

Transporting, Providing and fixing 60 cm high

Stainless steel railing made from anticorrosive

S.S.(304) Pipe of 50 mm dia (16Gauge) as horizontal

Pipe 2 Nos. with a vertical support Pipe 50 mm dia as

per Design fixed with base plate of size (150 mm x

150 mm x 5 mm) and 4 anchore bolt in RCC at 1.5m

c/c including all accessories and Labour Work as per

detailed drawing and directed by engineer-in-charge

Providing and filling rubbles including hand packing

and filling interstices with quarry spalls behind

abutments and between returns as directed

Providing TMT Bar FE 500D reinforcement for R.C.C.

work including bending, binding and placing in

position complete upto floor two level

Structural steel work ( Confirming to IS 4923-1997)

riveted, bolted or welded in builtup for all type

sections, in framed work, including cutting, hoisting,

fixing in position and applying a priming coat of

approved steel primer all complete as per the

structural designs and directions of Engineer in

charge.Column ( 122 x 61 x 3.6mm

Providing and fixing PUF Insulated continueous

sandwich panels for roofs of total thickness not less

than 30 mm made out from continue line

method.Panel shall have 0.5 mm thick pre coated GI

sheet on both side of Polyurethane foam with

external face being corrugated in shape for GI and PU

foam both material.The crest height of the panel shall

be of 35mm minimum wiht 250mm c/c pitch. The

Precoated sheet shall be of minimum 240 mpa steel

grade confirming to IS 14246:1995 and shall have zinc

coating of 120 gsm as per IS:277 , 5-7 microns epoxy

primer on both side of the sheet and polyester top

coat 15-18 micron.The PPGI Sheet shall have

protective guard film of minimum 25 microns to

avoid scratches wihile trasportation.The roof panels

are laid over a frame work of trusses, columns and

purlins fixed using 90mm self drilling bolt with rubber

washer including all types of flashings. PU Foam must

be self-extinguishing, fire retardant type having

minimum density of 40 Kg/Cu.mt.( +, - 2 Kgs)

including 0.25mm craft paper edging,self tapping

screws of required length and nos.etc complete as

per structural design and direction of Engineer-in-