Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹2,500
Closing Date
3 Nov 2026, 11:00 am
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer
O/o the Executive Engineer,PWD,BCM,Tiruppur
Providing accessibility to physically challenged persons for the work of Construction of New Sub Registrar office Building with Modern facilities at Mulanur of Dharapuram Taluk in Tiruppur District.
2026_PWD_714887_1
NIT-08-11/14.10.2026
Open Tender
Civil Works - Buildings
Item Wise
Mulanur
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹2,500
16 Oct 2026
16 Oct 2026
3 Nov 2026
16 Oct 2026
3 Nov 2026
16 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Paving the floor with best quality Tactile Paver Type of Yellow Colour Ceramic Tiles of size 305 x 305 x 15mm for Vision Impairment Person and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) | 12 | Sq.m | 2,740.65 | ₹32,887.8 |
| 2Manufacturing, supplying and fixing of 1/3 panelled and 2/3 grilled steel doors with the following specification M.S angles of a size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32x6mm M.S. flat is provided at required intervals in the shutter frames 18 gauge C.R. sheet is laid as panel in the shutter and welded intact for 1/3 bottom portion of the shutter. M.S. flat 18x5mm is welded over the 32x6mm M.S. flat sandwitching the CR sheet in between. Additional stiffener with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. The balance 2/3 portion at top is provided with grill at an average weight of 20kg/sq.m and 3 Nos Steel Parliament Hinges of Size 125mm x 150mm incase single leaves shutter to be provided, 6 Nos Steel Parliament Hinges of Size 125mm x 150mm for double leaves shutter to be provided, 6nos of holdfasts 200mm in length made of angle section spliced at the ends are welded to the outer frame of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided. one aldrop is provided at on appropriate place in the door. 2Nos of handle are to be provided. A Tie bar is provided at the bottom of the outer frame to prevent twisting of frame during transportation or fixing. All members are given one coat of red oxide primer as directed by the departmental officers. The rate includes cost of all meterials, labour charges, taxes, transportation to site of work, loading, unloading and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers. | |||||
| 2.01 | Single leaf of size 1.00m x 2.10m. | 1.62 | Sq.m | 5,566.25 | ₹9,017.33 |
| 3 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) | 26.5 | Sq.m | 154.1 | ₹4,083.65 |
| 4 | Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers. | 732 | Kg | 107.8 | ₹78,909.6 |
| 5 | Supplying and fixing of Water Dispenser with Following Specification. The Dispenser shall be built with Stainless Steel 304 Grade for the size of 510 mm (L) x 480 mm (W) x 1400 mm (H). The water tank capacity should be 15 ltrs for Normal Water, 15 ltrs for Cold water and 4 ltrs for Hot Water. The rate is inclusive of internal pipelines between the tanks. The outlet pipe shall be provided with 3 nos of SS tap with tray for avoiding the spill over water. The waste hose should be provided from the spill over tray and should be connected to the waste line provided. The inlet should be connected from existing Angle valve without any leakages. The rate is inclusive of loading, unloading and conveyance charges, etc complete complying with standard specification. | 1 | No | 45,500 | ₹45,500 |
| 6 | Supplying and fixing of Acrylic board in proper position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. | 648 | Sq.inch | 9 | ₹5,832 |
| 7 | Supply and fixing of Incinerator for Ladies Bathroom and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. | 1 | No. | 34,570 | ₹34,570 |
| 8 | GST @ 18% | 1 | Nos | 1 | ₹1 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.39 MB
TenderConditionSROMulanurphysciallychallenged.pdf
Tender Documents • 0.76 MB
BOQ_858753.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .