IMPROVEMENTS TO DAM SUB-DIVISION HARSOOR OFFICE BUILDING & DRILLING NEW BOREWELL & REPAIR TO EXISTING TOILET ROOM UNDER BNT PROJECT

IMPROVEMENTS TO DAM SUB-DIVISION HARSOOR OFFICE BUILDING & DRILLING NEW BOREWELL & REPAIR TO EXISTING TOILET ROOM UNDER BNT PROJECT

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Supply of ISI mark 175mm nominal bore, plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, ...

Providing and installing at site of work 160 mm dia (weight of pipe-2.753 kg) 4 Kg/m2 PVC pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line,...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Providing 7.50 HP-120 LPM @ 132 m=14 STG Outlet Dia-2.00" submersible pump set of 150mm dia suitable for bore well and confirming to IS 8034-2000; 3Phase, SS Bowl & Impeller with Low volt Motor as per...

Supply and delivery at site Brand new best make 1x3x10 Sqm PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendmen...

Providing, laying and jointing 63 mm dia pipes of HDPE grade PE80 PN12.5 of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unlo...

Supply and delivery at site stringing of heavy duty Nylone/ PP rope with ISI etc complete suitable for Single phase Pumpsets

Providing, laying and fixing of 50 mm dia heavy duty GI pipes conforming to IS 1239: 1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherev...

Supply and delivery at site 50 mm dia wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any

Supply and delivery at site wrought middle steel (galvanized) 50 mm dia GI bend confirming to IS 1239-II, 1991 with latest amendments if any

Supply and delivery at site special moulded variety 50 mm dia PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

Supply and delivery at site of brand new best make 50 mm non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments

Supply and delivery at site of brand new best make 63 mm pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING: 1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analo...

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Labour charges for providing connection using 3x1/2x16 sqmm insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary mate...

Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. (CSR 2023-24 Vol-5...

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shori...

Providing and laying in position cement concrete mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed...

Providing and laying in cement concrete M20 design mix using 20 mm nominal size graded crushed coarse aggregates for all Basement & surface level works, return walls, retaining walls, sunken floors et...

Providing brick work with common burnt clay non-modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand) inc...

Providing 20 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includin...

Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for buildings including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/ weldin...

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including PVC (S.W.R) drain pipe 100 mm diameter and 1.20 m long complete as per standard design

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 coarse s...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with IS mark and black solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, inclu...

Providing and fixing 8 mm dia CP/ SS Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-charge

Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead ...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) 30 mm thick solid plain flush door shutter of required s...

Providing and fixing 110 mm nominal dia Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints com...

Providing and fixing 25 mm nominal dia unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings for external work. This includes jointing...

Providing and fixing white vitreous China flat back wash basin size 550x 400 mm with single 15 mm CP brass pillar tap with CI brackets, 15 mm CP brass pillar taps, 32 mm CP brass waste of standard pat...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete

Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190g complete with brackets fixed to wooden cleats with CP b...

Providing and fixing 15 mm nominal bore brass bib cock of approved quality

Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ov...

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete

Providing and fixing PVC (SWR) S-Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete

Providing and fixing 25 mm dia chromium plated brass curtain rod with ISI mark hav- ing wall thickness of 1.25mm with two chromium plated brass brackets fixed with CP brass screws and PVC sleeves etc....

Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approv...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elas...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Supplying heavy gauge PVC conduit pipe 19/ 20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. T...

Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The c...

Wiring for lighting/ power circuit using one of FRLS 2.5 mm² PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with s...

Supplying and fixing of 2x4' Tube light fitting, made out of CRCA sheet metal body with locking type holder completely wired excluding Ballast & Fluorescent Tube

Supplying 48" Sweep (1200 mm) Regular model capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS...

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply

Fixing all types and all capacities of fluorescent/ false ceiling/ spot light/ CFL/ LED fittings indoor on the wall/ ceiling/ rafters/ girders using 23/0.0076" twin twisted PVC insulated wires, requir...

Fixing a ceiling/ wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5A ceiling rose, necessary len...

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5A ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire

Supplying, installation, testing & commissioning of 12V 150 AH capacity batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type.