04_EE_MDV_EM_KMDA_2025_26

Amount

Servicing and overhauling of 400 AMPS/ 500 AMPS/ 630 AMPS / 1250 Amps, 11kV / 6.6kV / 3.3kV VCB / VCU dismantling the rack from from the housing, opening the components, necessary cleaning of the component, carbonised portion, changing of rubber gasket, defective parts, cleaning of all mechanism parts and lubricating the mechanism, opening of C.T. & P.T.S. busbar spout assembly cleaning the same and insulated properly by supply of C.T.C. etc. and refitting all the parts to its original position by making all relevant electrical connection, panel wiring etc. for satisfactory & operation.

Supply,delivery , fitting and fixing of HT HRC Fuse of 63Amp , 7.2kV, Breaking Capacity 45kA for Motor Feeder Panel as per sample and direction of EIC. [Make: EATON(Bussmann), Catalogue No:7.2WFNMO63] (Deducted salvage value)

Supply,delivery , fitting and fixing of HT HRC Fuse of 50Amp , 7.2kV, Breaking Capacity 45kA for Capacitor Feeder Panel as per sample and direction of EIC. [Make: EATON(Bussmann), Catalogue No:7.2WFNMO50] (Deducted salvage value)

Servicing, cleaning and testing, calibration of following relay (for 6kV Panel /11kV Panel For Incomer Feeder: Each relay set consists of following relays MICOM P110/ 122/127/1NO. CGL 14N/C- 1No. VAX31 - 1No, VAA-33-1No VAMP-31-1NO, VAJH-13-1NO.or equivalent. (Deducted salvage value)

Servicing, cleaning and testing, calibration of following relay (for 6kV Panel /11kV Panel For Motor Protection: Each relay set consists of following relays Motor protection all relay and 1NO. VAJH 13-1NO.or equivalent. (Deducted salvage value)

Supply and delivery Pressure Indicator at Kg unit , Micro system & control make ( MPI 501U ) for Central Control Desk Panel as per direction and satisfaction of the EIC. (Deducted salvage value)

Supply and delivery Valve Position Indicator at % unit , Micro system & control make ( MPI 501U ) for Central Control Desk Panel as per direction and satisfaction of the EIC. (Deducted salvage value)

Supply and delivery Bearing & Winding Temperature Micro Scanner Indicator at ℃unit , Micro system & control make ( ADX ) for Central Control Desk Panel as per direction and satisfaction of the EIC. (Deducted salvage value)

Supply and delivery Water Flow indicator & Totaliser at m³/hr unit , Micro system & control make indicator ( FTX55PL ) for Central Control Desk Panel as per direction and satisfaction of the EIC. (Deducted salvage value)

Supply and installation of Pressure Transmitter as per direction of the EIC.(Make: HUVA CONTROL/Equiv) (Deducted salvage value)

Supply and installation of MultifunctionMeter (Model: Elite 440 , Make: Secure / Equiv.) as per technical specification and direction of the EIC. (Deducted salvage value)

Supply and delivery 25 Amp TNC Switch for Control Desk as per sample and technical specification & direction of the EIC. (Make: Kaycee) (Deducted salvage value)

Supply and delivery of Three phase Voltmeter CI0.5 (Model : DM3210, Make: Schneider /equiv.) as per technical specification and direction of EIC. (Deducted salvage value)

Supply and installation of Pressure gauge 0-10 kg (6'' dial) with SS base, with flow control valve as per direction of the EIC. (Deducted salvage value)

Supply & fixing of 230/240V, LED indicating lamp (make : AE/KAPPA/IMP) Blue/ white color. (Deducted salvage value)

Supply & fixing of 230/240V, LED indicating lamp (make :AE/KAPPA/IMP) other than Blue/ white color as per technical specification (Deducted salvage value)

Supply and delivery Master Trip Relay as per sample and technical specification & direction of the EIC. (Make: Alstom) (Deducted salvage value)

Supply and delivery of Screen Cable ( 3C x 0.75 Sq.mm ) as per technical Specification and direction of EIC (Deducted salvage value)

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Supply and delivery Motor Starter for 2 HP Submersible Pump as per technical specification and direction of the EIC (Deducted salvage value)

Supply and delivery of 240/415 V, 32 Amp DP MCB as per technical specification and direction of the EIC (Make: Legrand) (Deducted salvage value)

Supply and delivery of DP Enclosure for MCB as per technical specification and direction of the EIC (Make: Legrand) (Deducted salvage value)

Supply and delivery of 450 mm Sweep, SSTORM 2 (METAL BLADE) Semi Commercial Padestal Fan as per technical specification and direction of the EIC

Supply and delivery of 450 mm Sweep,3Ph ,1400RPM, IP55, Heavy duty EXHD450-4-3 Exhaust Fan as per technical specification and direction of the EIC (Deducted salvage value)

Supply and delivery of 1 ½ inch Gi Pipe ( Class-B Medium) as per technical specification and directionof EIC. (Deducted salvage value)

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (iv) Two coats (with any shade except white)

Repairing and reinstallation of 200 NB Air ReleaseValve for common Header as per technical specification and direction od EIC.

Servicing, , testing and recommissioning of Automatic Main and Standby Float cum Boost Battery Charger by rectification of converter section considering replacement of the main AVR Controller Card and minor components as required to complete the job as per technical specification and direction of the EIC

Removal and reinstallation of the 6 KV HT Motor ( Cap: 250 Kw , 1080 RPM Matharan make) for pump no.01 after disconnecting the motor connection line and removing of motor stool , lower half coupling ajuctment nuts and staking them in repairing bay as per direction of the EIC

Withdrawling the Pump No.01 ( Dis: 1630 m3/hr., Head: 35.20 m , Make: Flowmore) and dismantling the coloumn pipes, line shaft bushes and coupling , bellmouth and cutless bearing etc. part by part as per as per direction of EIC for RWPS Titagarh.

To and fro transportation charges of required items from pump house to workshop and return the same from workshop to pump house as per direction of the EIC

Supply and delivery of Cutless rubber Bearing ( OD: 105 mm , L=165 mm) as per sample and technical specification for coloumn pipe and direction of the EIC (Deducted salvage value)

Supply ,delivery of Line Shaft Sleeve ( L= 230 mm , ID= 64 mm , OD= 74 mm ) as per sample and direction of the EIC (Deducted salvage value)

Supply ,delivery of Head Shaft Sleeve ( L= 320 mm , ID= 64 mm , OD= 74 mm ) as per sample and direction of the EIC (Deducted salvage value)

Supply, delivery of HT Bolt (M24 x 110 L ) and Nut (M24 ) as per sample and direction of the EIC (Deducted salvage value)

Supply ,delivery of Retainer Gasket as per sample and direction of the EIC (Deducted salvage value)

Reinstallation of the Pump( Dis: 1630 m3/hr., Head: 35.20 m , Make: Flowmore) assembly after reassembling the Bellmouth , cutless bearing ,line shaft , bushes , sleeve ,coloumn pipe and TBH accessoriesetc. all complete and proper alignment with the pump in the presence of Pump expart and direction of the EIC for RWPS Titagarh.

MACHINE SUPPLIERS SYNDICATE PVT LTD (BID ID -6443704)

Mate Consultants Pvt. Ltd. (BID ID -6443508)